Detail publikačního výsledku

Machining a flax fibre composite using tools with different geometries

ZOUHAR, J.; KOLOMÝ, Š.; FIALA, Z.; SLANÝ, M.

Originální název

Machining a flax fibre composite using tools with different geometries

Anglický název

Machining a flax fibre composite using tools with different geometries

Druh

Stať ve sborníku mimo WoS a Scopus

Originální abstrakt

This article specifically focuses on the machining of composite materials reinforced with flax fibres, with the aim of identifying the main factors influencing the cutting process and the quality of the machined surface. The results revealed that the tool geometry featured the main factor affecting the vibrations and burr formation when machining of composite materials. Series of experiments unveiled that the tool with the helix angle of 7° and a higher number of cutting edges achieved the best results across most measured parameters such as burr formation. In contrast, the end mill with the helix angle of 45° exhibited the worse results in case of burr formation compared to the helix angle 7°.

Anglický abstrakt

This article specifically focuses on the machining of composite materials reinforced with flax fibres, with the aim of identifying the main factors influencing the cutting process and the quality of the machined surface. The results revealed that the tool geometry featured the main factor affecting the vibrations and burr formation when machining of composite materials. Series of experiments unveiled that the tool with the helix angle of 7° and a higher number of cutting edges achieved the best results across most measured parameters such as burr formation. In contrast, the end mill with the helix angle of 45° exhibited the worse results in case of burr formation compared to the helix angle 7°.

Klíčová slova

flax fibre, composite, machining, milling

Autoři

ZOUHAR, J.; KOLOMÝ, Š.; FIALA, Z.; SLANÝ, M.

Vydáno

07.10.2025

Nakladatel

Sampe Europe

Místo

Amsterdam

ISBN

978-90-8337

Kniha

Proceedings SE Conference 25 Amsterdam

Strany počet

11

BibTex

@inproceedings{BUT201042,
  author="Jan {Zouhar} and Štěpán {Kolomý} and Zdeněk {Fiala} and Martin {Slaný}",
  title="Machining a flax fibre composite using tools with different geometries",
  booktitle="Proceedings SE Conference 25 Amsterdam",
  year="2025",
  pages="11",
  publisher="Sampe Europe",
  address="Amsterdam",
  isbn="978-90-8337"
}