Detail publikačního výsledku

Optimization of Zirconium Oxide Nanoparticle-Enhanced Photocurable Resins for High-Resolution 3D Printing Ceramic Parts

Trembecka-Wójciga, K.; Jankowska, M.; Lepcio, P.; Sevriugina, V.; Korcusková, M.; Czeppe, T.; Zubrzycka, P.; Ortyl, J.

Originální název

Optimization of Zirconium Oxide Nanoparticle-Enhanced Photocurable Resins for High-Resolution 3D Printing Ceramic Parts

Anglický název

Optimization of Zirconium Oxide Nanoparticle-Enhanced Photocurable Resins for High-Resolution 3D Printing Ceramic Parts

Druh

Článek WoS

Originální abstrakt

In this study, photocurable acrylate resins with different concentrations of zirconium oxide (50% and 70% by weight) are polymerized according to a radical mechanism. The research focused on three main aspects: 1) the effect of ZrO2 nanoparticles on the kinetics of photopolymerization, 2) the optimization of digital light processing (DLP) 3D printing conditions for nanoparticle-filled and unfilled resins, and 3) the influence of nanoparticle addition on the thermomechanical properties of the 3D-printed structures. Photopolymerization kinetics are examined using photo-DSC and photo-rheology to assess the impact of nanoparticles on polymerization rates, shrinkage, and induction times. Despite challenges related to limited light penetration in highly nanoparticle-filled resins, optimal printing parameters are established, enabling the fabrication of high-performance 3D-printed materials. The inclusion of ZrO2 nanoparticles significantly enhances the thermomechanical properties of the final products, demonstrating the potential for advanced applications in additive manufacturing.

Anglický abstrakt

In this study, photocurable acrylate resins with different concentrations of zirconium oxide (50% and 70% by weight) are polymerized according to a radical mechanism. The research focused on three main aspects: 1) the effect of ZrO2 nanoparticles on the kinetics of photopolymerization, 2) the optimization of digital light processing (DLP) 3D printing conditions for nanoparticle-filled and unfilled resins, and 3) the influence of nanoparticle addition on the thermomechanical properties of the 3D-printed structures. Photopolymerization kinetics are examined using photo-DSC and photo-rheology to assess the impact of nanoparticles on polymerization rates, shrinkage, and induction times. Despite challenges related to limited light penetration in highly nanoparticle-filled resins, optimal printing parameters are established, enabling the fabrication of high-performance 3D-printed materials. The inclusion of ZrO2 nanoparticles significantly enhances the thermomechanical properties of the final products, demonstrating the potential for advanced applications in additive manufacturing.

Klíčová slova

3D printing; ceramic resins; DLP printing; nanoparticles; photocurable ceramic slurry

Klíčová slova v angličtině

3D printing; ceramic resins; DLP printing; nanoparticles; photocurable ceramic slurry

Autoři

Trembecka-Wójciga, K.; Jankowska, M.; Lepcio, P.; Sevriugina, V.; Korcusková, M.; Czeppe, T.; Zubrzycka, P.; Ortyl, J.

Vydáno

01.06.2025

Nakladatel

WILEY

Místo

HOBOKEN

ISSN

2196-7350

Periodikum

Advanced Materials Interfaces

Svazek

12

Číslo

11

Stát

Spolková republika Německo

Strany počet

16

URL

https://advanced.onlinelibrary.wiley.com/doi/10.1002/admi.202400951

BibTex

@article{BUT197871,
  author="Petr {Lepcio} and Veronika {Sevriugina} and Martina {Korčušková} and Joanna {Ortyl} and Klaudia {Trembecka-Wójciga} and Magdalena {Jankowska} and Tomasz {Czeppe} and Paulina {Zubrzycka}",
  title="Optimization of Zirconium Oxide Nanoparticle-Enhanced Photocurable Resins for High-Resolution 3D Printing Ceramic Parts",
  journal="Advanced Materials Interfaces",
  year="2025",
  volume="12",
  number="11",
  pages="16",
  doi="10.1002/admi.202400951",
  issn="2196-7350",
  url="https://advanced.onlinelibrary.wiley.com/doi/10.1002/admi.202400951"
}