Detail publikačního výsledku

Influence of activator type and slag volume fraction on properties of alkali-activated slag pastes

HAJZLER, J.; BÍLEK, V.; KOTRLA, J.; KUCHARCZYKOVÁ, B.

Originální název

Influence of activator type and slag volume fraction on properties of alkali-activated slag pastes

Anglický název

Influence of activator type and slag volume fraction on properties of alkali-activated slag pastes

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

Alkali-activated systems belong to the group of alternative inorganic binders in which the binder properties are dictated by both the aluminosilicate precursor and alkaline activator. In this work, blast furnace slag and three different alkaline activators, namely sodium hydroxide, sodium water glass, and sodium carbonate, were selected. An innovative mixture design based on the same concentration of alkali (Na+) of 4 mol/dm3 for all activators and different volume fractions of slag in pastes, ranging from 0.44 to 0.54, was investigated by the flow table test, compressive and flexural strength test, and by a shrinkage test under autogenous conditions. Great differences for various activators for all investigated parameters were obtained. The highest fluidity, regardless of volume fraction of the slag, was observed for the water glass, originating from a greatly decreased yield stress compared to the two other activators. The type of activator and the volume fraction of the slag also played a crucial role in the development of shrinkage and strength.

Anglický abstrakt

Alkali-activated systems belong to the group of alternative inorganic binders in which the binder properties are dictated by both the aluminosilicate precursor and alkaline activator. In this work, blast furnace slag and three different alkaline activators, namely sodium hydroxide, sodium water glass, and sodium carbonate, were selected. An innovative mixture design based on the same concentration of alkali (Na+) of 4 mol/dm3 for all activators and different volume fractions of slag in pastes, ranging from 0.44 to 0.54, was investigated by the flow table test, compressive and flexural strength test, and by a shrinkage test under autogenous conditions. Great differences for various activators for all investigated parameters were obtained. The highest fluidity, regardless of volume fraction of the slag, was observed for the water glass, originating from a greatly decreased yield stress compared to the two other activators. The type of activator and the volume fraction of the slag also played a crucial role in the development of shrinkage and strength.

Klíčová slova

alkali-activated slag, alkali activators, mechanical properties, autogenous shrinkage

Klíčová slova v angličtině

alkali-activated slag, alkali activators, mechanical properties, autogenous shrinkage

Autoři

HAJZLER, J.; BÍLEK, V.; KOTRLA, J.; KUCHARCZYKOVÁ, B.

Rok RIV

2023

Vydáno

30.09.2022

Kniha

25th International Conference Building Materials, Products and Technologies, ICBMPT 2022

ISSN

1742-6588

Periodikum

Journal of Physics: Conference Series

Svazek

2341

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany počet

8

URL

https://iopscience.iop.org/article/10.1088/1742-6596/2341/1/012013

Plný text v Digitální knihovně

http://hdl.handle.net/

BibTex

@inproceedings{BUT180701,
  author="Jan {Hajzler} and Vlastimil {Bílek} and Jan {Kotrla} and Barbara {Kucharczyková}",
  title="Influence of activator type and slag volume fraction on properties of alkali-activated slag pastes",
  booktitle="25th International Conference Building Materials, Products and Technologies, ICBMPT 2022",
  year="2022",
  journal="Journal of Physics: Conference Series",
  volume="2341",
  number="1",
  pages="8",
  doi="10.1088/1742-6596/2341/1/012013",
  issn="1742-6588",
  url="https://iopscience.iop.org/article/10.1088/1742-6596/2341/1/012013"
}