Detail publikačního výsledku

Annealing of Polymer Material PLA for Improved Properties

ŠAFL, P.; ZIMÁKOVÁ, J.; BINAR, T.

Originální název

Annealing of Polymer Material PLA for Improved Properties

Anglický název

Annealing of Polymer Material PLA for Improved Properties

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

The aim of the work was to improve the properties of 3D printed products using annealing. The biggest problem that 3D printed products face is internal stress and poor tribological properties, but it can be eliminated by annealing. The material chosen for this work is PLA, which is the most used material for 3D printing. Stress reduction was performed by drying furnace, which is capable of gradually increasing the temperature and therefore does not cause unwanted thermal shock. The drying furnace is fully sufficient for annealing plastics as it is able to maintain temperatures up to 250°C. After annealing, the samples were placed into a UV chamber. With the help of heat and moisture, the deformation of annealed and non-annealed testing bodies was monitored.

Anglický abstrakt

The aim of the work was to improve the properties of 3D printed products using annealing. The biggest problem that 3D printed products face is internal stress and poor tribological properties, but it can be eliminated by annealing. The material chosen for this work is PLA, which is the most used material for 3D printing. Stress reduction was performed by drying furnace, which is capable of gradually increasing the temperature and therefore does not cause unwanted thermal shock. The drying furnace is fully sufficient for annealing plastics as it is able to maintain temperatures up to 250°C. After annealing, the samples were placed into a UV chamber. With the help of heat and moisture, the deformation of annealed and non-annealed testing bodies was monitored.

Klíčová slova

žíhání, degradace materiálu, polymer PLA

Klíčová slova v angličtině

žíhání, degradace materiálu, polymer PLA

Autoři

ŠAFL, P.; ZIMÁKOVÁ, J.; BINAR, T.

Rok RIV

2022

Vydáno

10.12.2021

Nakladatel

The Electrochemical Society

Místo

USA

Kniha

ECS Transaction

Edice

1

ISSN

1938-6737

Periodikum

ECS Transactions

Svazek

105

Číslo

1

Stát

Spojené státy americké

Strany od

419

Strany do

430

Strany počet

12

URL

https://iopscience.iop.org/article/10.1149/10501.0419ecst

BibTex

@inproceedings{BUT175606,
  author="Pavel {Šafl} and Jana {Zimáková} and Tomáš {Binar}",
  title="Annealing of Polymer Material PLA for Improved Properties",
  booktitle="ECS Transaction",
  year="2021",
  series="1",
  journal="ECS Transactions",
  volume="105",
  number="1",
  pages="419--430",
  publisher="The Electrochemical Society",
  address="USA",
  doi="10.1149/10501.0419ecst",
  issn="1938-6737",
  url="https://iopscience.iop.org/article/10.1149/10501.0419ecst"
}