Detail publikace

Physico-Mechanical Properties of Ceramics Based on Aluminosilicates Modified by Metallurgical Waste

Utegenova, M.E., Sadenova, M.A., Klemeš, J.J.

Originální název

Physico-Mechanical Properties of Ceramics Based on Aluminosilicates Modified by Metallurgical Waste

Typ

článek v časopise ve Scopus, Jsc

Jazyk

angličtina

Originální abstrakt

The use of metallurgical slag for the synthesis of ceramics is considered as an alternative way to manage this waste. A significant effect on the physic-mechanical characteristics of ceramic materials when metallurgical slags are added is exerted by the heat treatment mode. Aluminosilicates were used as the main raw material metallurgical slags of lead and copper production were used as an additive-regulator of the properties of ceramics. It is shown that the addition of slag leads to an increase in mechanical strength. It was established that the maximum mechanical strength of 73.43 MPa is possessed by a sample obtained from a mixture of zeolite-bentonite-copper slag in the proportions of 50 % - 30 % - 20 %, at a moisture content of 15 % after calcination at 1,000 °C. © 2020, AIDIC Servizi S.r.l.

Klíčová slova

phyciso-mechanical; properties; ceramics; aluminosilicates; metallurgical; waste

Autoři

Utegenova, M.E., Sadenova, M.A., Klemeš, J.J.

Vydáno

1. 8. 2020

Nakladatel

Italian Association of Chemical Engineering - AIDIC

ISSN

2283-9216

Periodikum

Chemical Engineering Transactions

Číslo

81

Stát

Italská republika

Strany od

1339

Strany do

1344

Strany počet

6

URL

https://www.aidic.it/cet/20/81/224.pdf

BibTex

@article{BUT167944,
  author="Jiří {Klemeš}",
  title="Physico-Mechanical Properties of Ceramics Based on Aluminosilicates Modified by Metallurgical Waste",
  journal="Chemical Engineering Transactions",
  year="2020",
  number="81",
  pages="1339--1344",
  doi="10.3303/CET2081224",
  issn="2283-9216",
  url="https://www.aidic.it/cet/20/81/224.pdf"
}