Detail publikačního výsledku

Testing the Influence of the Material Bonding System on the Bond Strength of Large-Format Tiles Installed on Concrete Substrate under Mechanical Loading

TOPOLÁŘ, L.; KOCÁB, D.; ŠLANHOF, J.; SCHMID, P.; DANĚK, P.; NOVÁČEK, J.

Originální název

Testing the Influence of the Material Bonding System on the Bond Strength of Large-Format Tiles Installed on Concrete Substrate under Mechanical Loading

Anglický název

Testing the Influence of the Material Bonding System on the Bond Strength of Large-Format Tiles Installed on Concrete Substrate under Mechanical Loading

Druh

Článek WoS

Originální abstrakt

The paper describes an experiment focusing on the way the material system influences the bond strength of large-format tiles installed on concrete substrate during mechanical loading under conditions that correspond to real-life application. This involves a controllable mechanical load applied over an area of a test model while observing its condition using non-destructive methods (ultrasonic pulse velocity test, acoustic emission method, strain measurement, and acoustic tracing). The model consisted of a concrete slab onto which were mounted four different systems with large-format tiles with the dimensions of 3 m x 1 m. The combinations differed in the thickness of the tile, the adhesive, and whether or not a fabric membrane was included in the adhesive bed. The experiment showed that the loading caused no damage to the ceramic tile. All the detected failures took place in the adhesive layer or in the concrete slab.

Anglický abstrakt

The paper describes an experiment focusing on the way the material system influences the bond strength of large-format tiles installed on concrete substrate during mechanical loading under conditions that correspond to real-life application. This involves a controllable mechanical load applied over an area of a test model while observing its condition using non-destructive methods (ultrasonic pulse velocity test, acoustic emission method, strain measurement, and acoustic tracing). The model consisted of a concrete slab onto which were mounted four different systems with large-format tiles with the dimensions of 3 m x 1 m. The combinations differed in the thickness of the tile, the adhesive, and whether or not a fabric membrane was included in the adhesive bed. The experiment showed that the loading caused no damage to the ceramic tile. All the detected failures took place in the adhesive layer or in the concrete slab.

Klíčová slova

acoustic nondestructive methods; large format tiles; real-life application; mechanical load; failure

Klíčová slova v angličtině

acoustic nondestructive methods; large format tiles; real-life application; mechanical load; failure

Autoři

TOPOLÁŘ, L.; KOCÁB, D.; ŠLANHOF, J.; SCHMID, P.; DANĚK, P.; NOVÁČEK, J.

Rok RIV

2021

Vydáno

17.07.2020

Nakladatel

MDPI

Místo

Switzerland

ISSN

1996-1944

Periodikum

Materials

Svazek

13

Číslo

14

Stát

Švýcarská konfederace

Strany od

1

Strany do

14

Strany počet

14

URL

https://www.mdpi.com/1996-1944/13/14/3200/htm

Plný text v Digitální knihovně

http://hdl.handle.net/11012/193401

BibTex

@article{BUT164489,
  author="Libor {Topolář} and Dalibor {Kocáb} and Jiří {Šlanhof} and Pavel {Schmid} and Petr {Daněk} and Jaroslav {Nováček}",
  title="Testing the Influence of the Material Bonding System on the Bond Strength of Large-Format Tiles Installed on Concrete Substrate under Mechanical Loading",
  journal="Materials",
  year="2020",
  volume="13",
  number="14",
  pages="1--14",
  doi="10.3390/ma13143200",
  url="https://www.mdpi.com/1996-1944/13/14/3200/htm"
}

Dokumenty

materials-13-03200