Detail publikačního výsledku

VOLUMETRIC COMPENSATION OF THREE-AXIS VERTICAL MACHINING CENTRE

HOLUB, M.; BLECHA, P.; BRADÁČ, F.; KAŇA, R.

Originální název

VOLUMETRIC COMPENSATION OF THREE-AXIS VERTICAL MACHINING CENTRE

Anglický název

VOLUMETRIC COMPENSATION OF THREE-AXIS VERTICAL MACHINING CENTRE

Druh

Článek Scopus

Originální abstrakt

This contribution assesses the possibilities of application of volumetric compensation technology on a small three-axis vertical machining centre. These machine tools are designed for machining of small workpieces with various requirements on dimensional and shape accuracy. Small machine tools do not show large volumetric deviations across the entire working space as it is seen with medium-sized and large machining centres. To test volumetric compensation, detailed measurements on a small machining centre (demonstrator) were performed prior to activation of compensation set; other verification measurements were carried out with activated compensation set. Even if volumetric compensation is deployed, it is necessary to verify the achieved results in an appropriate manner. The accomplished study will offer pertinent conclusions on the appropriateness of the technology to be deployed for selected types of workpieces.

Anglický abstrakt

This contribution assesses the possibilities of application of volumetric compensation technology on a small three-axis vertical machining centre. These machine tools are designed for machining of small workpieces with various requirements on dimensional and shape accuracy. Small machine tools do not show large volumetric deviations across the entire working space as it is seen with medium-sized and large machining centres. To test volumetric compensation, detailed measurements on a small machining centre (demonstrator) were performed prior to activation of compensation set; other verification measurements were carried out with activated compensation set. Even if volumetric compensation is deployed, it is necessary to verify the achieved results in an appropriate manner. The accomplished study will offer pertinent conclusions on the appropriateness of the technology to be deployed for selected types of workpieces.

Klíčová slova

volumetric compensation, volumetric accuracy, machine tool, LaserTRACER, ballbar

Klíčová slova v angličtině

volumetric compensation, volumetric accuracy, machine tool, LaserTRACER, ballbar

Autoři

HOLUB, M.; BLECHA, P.; BRADÁČ, F.; KAŇA, R.

Rok RIV

2016

Vydáno

10.09.2015

ISSN

1805-0476

Periodikum

MM Science Journal

Svazek

2015

Číslo

October

Stát

Česká republika

Strany od

677

Strany do

681

Strany počet

5

URL

http://www.mmscience.eu/content/file/MM_Science_201534.pdf

BibTex

@article{BUT116180,
  author="Michal {Holub} and Petr {Blecha} and František {Bradáč} and Roman {Kaňa}",
  title="VOLUMETRIC COMPENSATION OF THREE-AXIS VERTICAL MACHINING CENTRE",
  journal="MM Science Journal",
  year="2015",
  volume="2015",
  number="October",
  pages="677--681",
  doi="10.17973/MMSJ.2015\{_}10\{_}201534",
  issn="1803-1269",
  url="http://www.mmscience.eu/content/file/MM_Science_201534.pdf"
}