Detail publikačního výsledku

Dry Pressed Ceramic Body Based on Limestone Sludge and Granite Dust

SOKOLÁŘ, R.; GRYGAROVÁ, S.; ŠVEDA, M.

Originální název

Dry Pressed Ceramic Body Based on Limestone Sludge and Granite Dust

Anglický název

Dry Pressed Ceramic Body Based on Limestone Sludge and Granite Dust

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

The article discusses the utilization of two different natural secondary raw materials in a dry pressed ceramic body with a kaolinic clay admixture. LS formed during the washing process of limestone aggregate and granite dust obtained during the crushing of granite were used as the basic non-plastic raw materials. The physico-mechanical properties of green samples (bulk density) and fired samples (water absorption, bulk density, flexural strength, mineralogical composition) were tested for samples made from raw material mixtures with a constant content of clay (40 wt%) and different ratio of dust and sludge. A higher content of LS in the test samples increases the bulk density of a green body, porosity (water absorption) and flexural strength of fired bodies, and decreases its firing shrinkage. This fact is caused by the creation of anorthite CaO Al2O3 2SiO2 in the body containing limestone sludge during the firing.

Anglický abstrakt

The article discusses the utilization of two different natural secondary raw materials in a dry pressed ceramic body with a kaolinic clay admixture. LS formed during the washing process of limestone aggregate and granite dust obtained during the crushing of granite were used as the basic non-plastic raw materials. The physico-mechanical properties of green samples (bulk density) and fired samples (water absorption, bulk density, flexural strength, mineralogical composition) were tested for samples made from raw material mixtures with a constant content of clay (40 wt%) and different ratio of dust and sludge. A higher content of LS in the test samples increases the bulk density of a green body, porosity (water absorption) and flexural strength of fired bodies, and decreases its firing shrinkage. This fact is caused by the creation of anorthite CaO Al2O3 2SiO2 in the body containing limestone sludge during the firing.

Klíčová slova

granite dust, limestone sludge, dry pressed ceramic body, porosity, strength, mineralogical composition

Klíčová slova v angličtině

granite dust, limestone sludge, dry pressed ceramic body, porosity, strength, mineralogical composition

Autoři

SOKOLÁŘ, R.; GRYGAROVÁ, S.; ŠVEDA, M.

Rok RIV

2014

Vydáno

13.03.2013

Nakladatel

Expert Fachmedien GmbH

Místo

Dusseldorf, Germany

ISSN

0020-5214

Periodikum

INTERCERAM

Svazek

62

Číslo

2

Stát

Spolková republika Německo

Strany od

95

Strany do

99

Strany počet

5

BibTex

@article{BUT104571,
  author="Radomír {Sokolář} and Simona {Stezková} and Mikuláš {Šveda}",
  title="Dry Pressed Ceramic Body Based on Limestone Sludge and Granite Dust",
  journal="INTERCERAM",
  year="2013",
  volume="62",
  number="2",
  pages="95--99",
  issn="0020-5214"
}