Detail projektu

Holistic approach to Rotating Packed Bed (RPB) absorption process with the use of 3D CFD, visual studies, and mass transfer experiments

Období řešení: 01.01.2022 — 31.12.2024

Zdroje financování

Grantová agentura České republiky - LA granty

- plně financující (2021-10-06 - 2024-12-31)

O projektu

The project will study the mechanisms that take place in the rotational absorber (RPB). It is a combination of mechanisms of liquid spray in the eye, in the rotating packing and in the outer cavity, incl. spray on the outer surface and the formation of a liquid film and mechanisms of mass transfer and absorption of gas. So far, attention has been mostly paid to the effect of rotation, centrifugal force or type of packing on the overall efficiency of gas capture, often supplemented by CFD. There is no relevant literature that illuminates the above-mentioned mechanisms in context, and which studies in detail the interaction between the sprayed liquid and the efficiency of gases capture. E.g. it is stated that 8 to 30% of the capture takes place in the outer cavity, but there is a lack of well-founded data on why and under what conditions this happens. The combination of two teams, where there are experts on the atomization of liquids on the Czech side and experts on RPB and the process side, will enable fundamental progress in understanding the mechanisms of RPB.

Klíčová slova
Rotational packed bed;Liquid atomization;Liquid sprays;Laser systems PDA/LDA;High speed camera; CFD;Mass transfer;Chemical absorption;

Označení

21-45227L

Originální jazyk

angličtina

Řešitelé

Jícha Miroslav, prof. Ing., CSc. - hlavní řešitel

Útvary

Energetický ústav
- příjemce (16.12.2020 - nezadáno)

Výsledky

HÁJEK, O.; CEJPEK, O.; MALÝ, M.; PRINZ, F.; JÍCHA, M. A dispersion of a droplet flow on crossing wires in an air counterflow. In EFM21 – 15th International Conference “Experimental Fluid Mechanics 2021”. EPJ Web of Conferences. EPJ Web of Conferences, 2022. p. 1-5. ISSN: 2100-014X.
Detail

HÁJEK, O.; BOUCHAL, P.; CEJPEK, O.; MALÝ, M.; HÁJEK, J.; PRINZ, F.; ZAWADSKI, D.; BLATKIEWICZ, M.; JÍCHA, M. Characteristics of droplets formed on the outer surface of the rotating packed bed. 2022. p. 1-5.
Detail

HÁJEK, O.; BOUCHAL, P.; MALÝ, M.; ZAWADSKI, D.; BLATKIEWICZ, M.; JÍCHA, M. Comparative analysis of droplet characteristics generated in the outer cavity of RPB for two packings. Jeju: Ilass Asia 2023, 2023. p. 207-208.
Detail

BLATKIEWICZ, M.; WOJTASIK-MALINOWSKA, J.; ZAWADSKI, D.; PIĄTKOWSKI, M.; MALÝ, M.; HÁJEK, O.; CEJPEK, O.; JASKULSKI, M. Modeling and simulation of an enzymatic reactive absorption process in the internal zone of a rotating packed bed apparatus. Chemical Engineering and Processing, 2023, vol. 189, no. 1, p. 1-14. ISSN: 0255-2701.
Detail

ZAWADSKI, D.; MAJDZIK, M.; HÁJEK, O.; MALÝ, M.; BLATKIEWICZ, M. Improvement of baffle type Rotating Packed Bed’s packing by visual study. Chemical and Process Engineering-Inzynieria Chemiczna I Procesowa, 2023, vol. 44, no. 3, p. 1-6. ISSN: 2300-1925.
Detail

HÁJEK, O.; MALÝ, M.; JEDELSKÝ, J.; VANKESWARAM, S.; CEJPEK, O.; PRINZ, F.; JÍCHA, M. Liquid jet dispersion after impact on a highly curved surface. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2023, vol. 149, no. 1, ISSN: 1879-2286.
Detail

Odpovědnost: Jícha Miroslav, prof. Ing., CSc.