prof. Ing.

Pavel Novotný

Ph.D.

FSI, ÚADI OPJ – vedoucí odboru

+420 54114 2272
novotny.pa@fme.vutbr.cz

Odeslat VUT zprávu

prof. Ing. Pavel Novotný, Ph.D.

Publikace

  • 2023

    NOVOTNÝ, P.; KUDLÁČEK, P.; VACULA, J. Explanation of the mechanisms of unsteady gas flow through the turbocharger seal system, including thermal and structural interactions. Propulsion and Power Research, 2023, roč. 12, č. 2, s. 180-198. ISSN: 2212-540X.
    Detail | WWW | Plný text v Digitální knihovně

    VACULA, J.; NOVOTNÝ, P. Identification of Aerodynamic Tonal Noise Sources of a Centrifugal Compressor of a Turbocharger for Large Stationary Engines. Applied Sciences - Basel, 2023, roč. 13, č. 10, s. 1-20. ISSN: 2076-3417.
    Detail | WWW | Plný text v Digitální knihovně

    NOVOTNÝ, P.; KUDLÁČEK, P.; VACULA, J.; KOCMAN, F. Innovative approach to reduce friction losses in turbocharger journal bearings. Scientific Proceeding KOKA 2023. 70. Brno: Brno University of Technology, Faculty of Mechanical Engineering, 2023. s. 20-20. ISBN: 978-80-214-6164-2.
    Detail

  • 2022

    VACULA, J.; NOVOTNÝ, P. Critical pressure in liquids due to dynamic choking. PHYSICAL REVIEW E, 2022, roč. 105, č. 4, s. 1-10. ISSN: 2470-0045.
    Detail | WWW

    VACULA, J.; NOVOTNÝ, P.; KUDLÁČEK, P. Application of a Casing Treatment to a Centrifugal Compressor. Scientific Proceedings KOKA 2022. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. ISBN: 978-80-227-5215-2.
    Detail

    KUDLÁČEK, P.; NOVOTNÝ, P.; VACULA, J.; KOCMAN, F. Investigating the Effect of Rotor Design Changes on Mechanical Losses Due to Rotor-Fluid Interaction. Journal of Mechanical Engineering - Strojnícky časopis, 2022, roč. 72, č. 03, s. 71-80. ISSN: 2450-5471.
    Detail | WWW

    KUDLÁČEK, P.; NOVOTNÝ, P.; VACULA, J. Experimental Verification of the Effect of Rotor Design Changes on the Mechanical Losses. Scientific Proceedings KOKA 2022. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. s. 97-104. ISBN: 978-80-227-5215-2.
    Detail

  • 2021

    KUDLÁČEK, P.; NOVOTNÝ, P.; VACULA, J. Modelling Frictional Losses of Turbochargers due to Rotor-Fluid Interaction. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. s. 100-111. ISBN: 978-80-213-3132-7.
    Detail

    VACULA, J.; NOVOTNÝ, P.; KUDLÁČEK, P. Classification of Aerodynamic Instabilities in a Centrifugal Compressor. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. s. 90-98. ISBN: 978-80-213-3132-7.
    Detail

    NOVOTNÝ, P.; VACULA, J.; KUDLÁČEK, P. Innovative Approach to Reduce Friction Losses in Turbocharger Thrust Bearings. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. s. 140-146. ISBN: 978-80-213-3132-7.
    Detail

    DLUGOŠ, J.; NOVOTNÝ, P. Effective Implementation of Elastohydrodynamic Lubrication of Rough Surfaces into Multibody Dynamics Software. Applied Sciences - Basel, 2021, roč. 11, č. 4, s. 1-21. ISSN: 2076-3417.
    Detail | WWW | Plný text v Digitální knihovně

    NOVOTNÝ, P.; VACULA, J.; HRABOVSKÝ, J. Solution strategy for increasing the efficiency of turbochargers by reducing energy losses in the lubrication system. Energy, 2021, roč. 236, č. 121402, s. 1-16. ISSN: 0360-5442.
    Detail | WWW

    NOVOTNÝ, P.; VACULA, J.; KUDLÁČEK, P. Virtual Turbocharger as a Tool for Reality Simulation. In Mechanisms and Machine Science, Proceedings of I4SDG Workshop 2021. 1. Cham: Springer, 2021. s. 535-544. ISBN: 978-3-030-87382-0.
    Detail | WWW | Plný text v Digitální knihovně

    VACULA, J.; NOVOTNÝ, P. An Overview of Flow Instabilities Occurring in Centrifugal Compressors Operating at Low Flow Rates. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2021, roč. 143, č. 11, s. 1-13. ISSN: 0742-4795.
    Detail | WWW

    NOVOTNÝ, P.; VACULA, J.; JONÁK, M. Evolutionary Optimisation of the Thrust Bearing Considering Multiple Operating Conditions in Turbomachinery. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, roč. 195, č. 2021, s. 1-13. ISSN: 0020-7403.
    Detail | WWW

  • 2020

    NOVOTNÝ, P.; DLUGOŠ, J.; VACULA, J. Application of Multibody Dynamics Tools for Determination of Engine Excited Turbocharger Vibrations. In ENGINEERING MECHANICS 2020. 1st edition. 2020. s. 384-387. ISBN: 978-80-214-5896-3.
    Detail | WWW

    NOVOTNÝ, P.; VACULA, J.; DLUGOŠ, J.; JONÁK, M. Analytical Tool for the Identification of Vibration and Noise Sources in Turbochargers. 51st International Scientific Conference of Czech and Slovak Universities and Institutions Dealing with Motor Vehicles and Internal Combustion Engines Research. 1. Praha: České vysoké učení technické v Praze, 2020. s. 46-51. ISBN: 978-80-01-06744-4.
    Detail

    NOVOTNÝ, P.; HRABOVSKÝ, J.; KLÍMA, J.; HORT, V. Improving the thrust bearing performance of turbocharger rotors using optimization methods and virtual prototypes. In 12th International Conference on Vibrations in Rotating Machinery. 1st Edition. London: CRC Press, 2020. s. 100-111. ISBN: 9781003132639.
    Detail | WWW

    NOVOTNÝ, P.; HRABOVSKÝ, J. Efficient computational modelling of low loaded bearings of turbocharger rotors. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, roč. 174, č. 2020, s. 374-383. ISSN: 0020-7403.
    Detail | WWW

  • 2019

    NOVOTNÝ, P.; HRABOVSKÝ, J.; JURAČKA, J.; KLÍMA, J.; HORT, V. Effective thrust bearing model for simulations of transient rotor dynamics. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, roč. 157, č. 2019, s. 374-383. ISSN: 0020-7403.
    Detail | WWW

    NOVOTNÝ, P.; HRABOVSKÝ, J. Review of methods for increasing the mechanical efficiency of exhaust gas turbochargers. In Proceedings of the L. International Scientific Conference of Czech and Slovak Universities and Institutions Dealing with Motor Vehicles and Internal Combustion Engines Research – KOKA 2019. 1. Nitra: Publishing Centre of Slovak University of Agriculture in Nitra, 2019. s. 225-234. ISBN: 978-80-7509-668-5.
    Detail

    NOVOTNÝ, P.; ŠKARA, P. Multibody simulation of turbocharger transient rotordynamics. In ENGINEERING MECHANICS 2019. First edition. 2019. s. 259-262. ISBN: 978-80-87012-71-0.
    Detail | WWW

  • 2018

    DLUGOŠ, J.; NOVOTNÝ, P. Piston secondary motion measurement by laser displacement sensors. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. s. 170-175. ISSN: 2345-0533.
    Detail | WWW | Plný text v Digitální knihovně

    NOVOTNÝ, P.; ŠKARA, P.; HLINÍK, J. The effective computational model of the hydrodynamics journal floating ring bearing for simulations of long transient regimes of turbocharger rotor dynamics. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, roč. 148, č. 2018, s. 611-619. ISSN: 0020-7403.
    Detail | WWW

    NOVOTNÝ, P. Virtual Turbocharger – A Tool for Powertrain Development. Stuttgart, Germany: FEV GmbH, 2018. s. 1-20.
    Detail

    NOVOTNÝ, P.; DLUGOŠ, J.; DOMAN, J.; HLINÍK, J.; JONÁK, M. Simulation approach for a solution of turbocharger rotordynamic noise. In Vibroengineering Procedia. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. s. 144-149. ISSN: 2345-0533.
    Detail

    NOVOTNÝ, P.; JONÁK, M.; DLUGOŠ, J.; HLINÍK, J.; DOMAN, J. Solution approaches and tools for turbocharger development. In KOKA 2018 Scientific Proceedings. Nitra: Publishing Centre of Slovak University of Agriculture in Nitra, 2018. s. 79-88. ISBN: 978-80-552-1880-9.
    Detail

    NOVOTNÝ, P.; JONÁK, M.; DOMAN, J. Vibration analysis of the turbocharger considering low frequency excitations. In Transport Means 2018 – Proceedings of the 22nd International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2018. s. 759-764. ISSN: 1822-296X.
    Detail | WWW

  • 2017

    NOVOTNÝ, P. Mixed Lubrication Solution of Dynamically Loaded Radial Slide Bearings. Tribology in Industry, 2017, roč. 39, č. 1, s. 82-89. ISSN: 0354-8996.
    Detail | WWW | Plný text v Digitální knihovně

    NOVOTNÝ, P.; DLUGOŠ, J.; PROKOP, A.; ŘEHÁK, K.; RAFFAI, P. Effective computational model for a solution of turbocharger rotor dynamics. Journal of Vibroengineering, 2017, roč. 19, č. 2, s. 724-736. ISSN: 1392-8716.
    Detail

    NOVOTNÝ, P.; DRÁPAL, L.; PROKOP, A.; ŘEHÁK, K. Modelling the powertrain rubber coupling under dynamic conditions. Journal of Vibroengineering, 2017, roč. 19, č. 5, s. 3710-3719. ISSN: 1392-8716.
    Detail

    STODOLA, J.; NOVOTNÝ, P. Virtual Engine a Tool for Truck Reliability Increase. In 4TH INTERNATIONAL CONFERENCE ON MANUFACTURING AND INDUSTRIAL TECHNOLOGIES (ICMIT 2017). IOP Conference Series: Materials Science and Engineering. 4. Lisbon, PORTUGAL: IOP Publishing, 2017. s. 1-5. ISSN: 1757-899X.
    Detail | WWW

    NOVOTNÝ, P. Increasing The Mechanical Efficiency of Turbochargers. In Sborník přednášek XLVIII. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. 1. Liberec: Technická univerzita v Liberci, 2017. s. 145-157. ISBN: 978-80-7494-354-6.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P. Torsional vibration analysis of crank train with low friction losses. Journal of Vibroengineering, 2017, roč. 19, č. 8, s. 5691-5701. ISSN: 1392-8716.
    Detail

    NOVOTNÝ, P.; FRANZ, R.; DUNDÁLEK, R. Zhodnocení emisních parametrů prototypu motoru P3. 2017. s. 1-20.
    Detail

    NOVOTNÝ, P.; DLUGOŠ, J. Innovative Model of Radial Fluid Bearing for Simulations of Turbocharger Rotordynamics. In Mechatronics 2017 Recent Technological and Scientific Advances. Advances in Intelligent Systems and Computing. Cham: Springer International Publishing AG, 2017. s. 356-364. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
    Detail

  • 2016

    KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Multibody Based Tool for Simulation of the Turbocharger Rotor Dynamics. Applied Mechanics and Materials, 2016, roč. 821, č. 1, s. 229-235. ISSN: 1662-7482.
    Detail | WWW

    DLUGOŠ, J.; NOVOTNÝ, P.; RAFFAI, P. Difficulties in Computational Modelling of Piston/ Liner Interaction. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2016. s. 134-137. ISSN: 2345-0533.
    Detail | Plný text v Digitální knihovně

    NOVOTNÝ, P.; PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K. Investigating the influence of computational model complexity on noise and vibration modeling of powertrain. Journal of Vibroengineering, 2016, roč. 18, č. 1, s. 378-393. ISSN: 1392-8716.
    Detail | WWW | Plný text v Digitální knihovně

    RAFFAI, P.; NOVOTNÝ, P.; DLUGOŠ, J. Computer Simulation of the Behavior of the Piston Ring Pack of Internal Combustion Engines. Applied Mechanics and Materials, 2016, roč. 821, č. 1, s. 166-171. ISSN: 1662-7482.
    Detail | WWW

    DLUGOŠ, J.; NOVOTNÝ, P.; RAFFAI, P. Advanced Computational Analysis of Connecting Rod of an Aircraft Engine. Applied Mechanics and Materials, 2016, roč. 821, č. 1, s. 199-206. ISSN: 1662-7482.
    Detail | WWW

    KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; DLUGOŠ, J. Influence of Turbine and Compressor Wheel Mass and Inertia on the Rotor Dynamics of Turbocharger. Tribology in Industry, 2016, roč. 38, č. 1, s. 24-32. ISSN: 0354-8996.
    Detail | WWW | Plný text v Digitální knihovně

    DLUGOŠ, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; KNOTEK, J. Development of Computational Model of Piston Dynamics Behaviour. In ENGINEERING MECHANICS 2016 - 22nd INTERNATIONAL CONFERENCE. Prague, Czech Republic: Institute of Thermomechanics Academy of Sciences of the Czech Republic, v.v.i., 2016. s. 126-129. ISBN: 978-80-87012-59- 8.
    Detail

    ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M.; NOVOTNÝ, P. INVESTIGATION OF SINGLE STAGE GEARBOX PARAMETERS INFLUENCING SURFACE NORMAL VELOCITY. In Engineering Mechanics 2016. 2016. s. 478-481. ISBN: 978-80-87012-59- 8.
    Detail

    NOVOTNÝ, P.; ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M. Solution of dynamics and acoustics by virtual powertrain. In Engineering Mechanics 2016. PRAGUE, CZECH REPUBLIC: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, 2016. s. 482-486. ISBN: 978-80-87012-59- 8.
    Detail

    NOVOTNÝ, P.; DLUGOŠ, J.; RAFFAI, P. Advanced Computational Strategy for Simulation of Turbocharger Rotordynamics. In Transport Means. 2016. Transport Means. Kaunas, Lithuania: 2016. s. 134-137. ISSN: 1822-296X.
    Detail

    NOVOTNÝ, P.; VOPAŘIL, J. Development of Highly Elastic Couplings for Natural Gas Engines. In Transport Means 2016. Transport Means. Kaunas, Lithuania: 2016. s. 93-98. ISSN: 1822-296X.
    Detail

    NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; DLUGOŠ, J.; KNOTEK, J. Mixed Lubrication Solution with Consideration of Elastic Deformations and Real Surface Roughness Structures. Journal of the Balkan Tribological Association, 2016, roč. 2016, č. 4, s. 3292-3312. ISSN: 1310-4772.
    Detail

    NOVOTNÝ, P.; DLUGOŠ, J.; RAFFAI, P. Computational simulation of the turbocharger rotor mechanical noise. In Vibroengineering Procedia. Vibroengineering Procedia. 7. Geliu ratas 15A, LT-50282,Kaunas, Lithuania: Vibroengineering PROCEDIA, 2016. s. 110-115. ISSN: 2345-0533.
    Detail

    NOVOTNÝ, P.; PROKOP, A.; ŘEHÁK, K. Complex strategy for a development of highly elastic couplings. In Vibroengineering PROCEDIA. Vibroengineering Procedia. 7. Geliu ratas 15A, LT-50282,Kaunas, Lithuania: JVE International Ltd., 2016. s. 97-102. ISSN: 2345-0533.
    Detail

    NOVOTNÝ, P.; RAFFAI, P.; DLUGOŠ, J. Virtual Turbocharger Rotor – a Tool for Rotordynamics Solution. In Deterioration Dependability Diagnostics. 1. Brno: Universita Obrany, 2016. s. 29-37. ISBN: 978-80-7231-376- 1.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; KNOTEK, J. Numerical Solution of Micro- lubrication in Internal Combustion Engine Journal Bearing. Applied Mechanics and Materials, 2016, roč. 821, č. 1, s. 159-166. ISSN: 1662- 7482.
    Detail | WWW

  • 2015

    KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Multibody Based Tool for Simulation of the Turbocharger Rotor Dynamics. In Engineering Mechanics 2015. Prague: Institute of Theoretical and Applied Mechanics, Academy of Science of the Czech Republic, 2015. s. 138-139. ISBN: 978-80-86246-42- 0.
    Detail

    NOVOTNÝ, P. Souhrnná zpráva o postupu prací za rok 2015. 2015. s. 1-52.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; KNOTEK, J. Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing Numerical Solution of Micro- lubrication in Internal Combustion Engine Journal Bearing. In Engineering Mechanics 2015. 1. Prague: Institute of Theoretical and Applied Mechanics, Avademy of Sciences of the Czech Republic, v.v.i, Prague, 2015. s. 192-193. ISBN: 978-80-86246-42- 0.
    Detail

    DLUGOŠ, J.; NOVOTNÝ, P.; RAFFAI, P. Advanced Computational Analysis of Connecting Rod of an Aircraft Engine. In ENGINEERING MECHANICS 2015 - 21st INTERNATIONAL CONFERENCE. Prague, Czech Republic: Academy of Sciences of the Czech Republic, v.v.i., 2015. s. 48-49. ISBN: 978-80-86246-42- 0.
    Detail

    KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P. Multi Body Analysis of the Turbocharger Supported by Fully Floating Ring Bearing. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, roč. 2015, č. 1, s. 14-18. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P.; DLUGOŠ, J.; KNOTEK, J.; MARŠÁLEK, O.; RAFFAI, P. Role of Computational Simulations In Design Process of Piston Rings. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, roč. 2014, č. 3, s. 1-7. ISSN: 1214- 0821.
    Detail | WWW

    PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Computational tools for transmission dynamics modelling. In Setkání uživatelů MSC. SOFTWARE 2015. 1. MSC.Software s.r.o., 2015. s. 146-150.
    Detail

    PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. VIRTUAL GEARBOX DEVELOPMENT AND VERIFICATION. In KOKA 2015. Bratislava: Faculty of Mechanical Engineering, Slovak University of Technology and Designing, Department of Cars, Ships and Combustion Engines, 2015. s. 239-244. ISBN: 978-80-227-4424- 9.
    Detail

    NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; KNOTEK, J.; DLUGOŠ, J. Methods for Solution of Slide Bearing Tribology and Dynamics. In Deterioration, Dependability, Diagnostics. Brno: University of Defence, 2015. s. 61-68. ISBN: 978-80-7231-431- 7.
    Detail

    PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Complex Evaluation of Transmission NVH Parameters. In Transport Means 2015. Transport Means. Kaunas: Kaunas University of Technology, 2015. s. 563-566. ISSN: 1822-296X.
    Detail

    DLUGOŠ, J.; NOVOTNÝ, P. Computational Modelling of Piston Ring Dynamics in 3D. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, roč. 2015, č. 1, s. 1-7. ISSN: 1214- 0821.
    Detail | WWW

    PROKOP, A.; ŘEHÁK, K.; ZUBÍK, M.; NOVOTNÝ, P. Experimental Validation of the Gearbox NVH Parameters. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, roč. 2015, č. 2, s. 16-21. ISSN: 1214- 0821.
    Detail

    MARŠÁLEK, O.; DLUGOŠ, J.; RAFFAI, P.; NOVOTNÝ, P.; KNOTEK, J. Experimental Determination of Contact Area. Tribology in Industry, 2015, roč. 37, č. 4, s. 427-433. ISSN: 0354- 8996.
    Detail | WWW

    MARŠÁLEK, O.; VOPAŘIL, J.; NOVOTNÝ, P. Validation of Analytical Calculation of Contact Pressure. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. Switzerland: Springer International Publishing, 2015. s. 495-500. ISBN: 978-3-319-23921- 7. ISSN: 2194- 5357.
    Detail

    MARŠÁLEK, O.; DLUGOŠ, J.; NOVOTNÝ, P.; ZHÁŇAL, L. Contact Area Evaluation Experiment Verified by Computational Model in MBS. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. Switzerland: Springer International Publishing, 2015. s. 489-494. ISBN: 978-3-319-23921- 7. ISSN: 2194- 5357.
    Detail

    MARŠÁLEK, O.; VOPAŘIL, J.; RAFFAI, P.; NOVOTNÝ, P. SELECTION OF ANALYTICAL COMPUTATIONAL MODEL OF CONTACT PRESSURE. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, roč. 13, č. 2, s. 10-15. ISSN: 1214- 0821.
    Detail | WWW

    KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; DLUGOŠ, J. The Influence of rotor unbalance on turbocharger rotor dynamics. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, roč. 2015, č. 3, s. 8-13. ISSN: 1214-0821.
    Detail

    PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Approach for Assessment of Experimental Gearbox NVH Parameters. In FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY V. 1. Hong Kong, PEOPLES R CHINA: DESTECH PUBLICATIONS, INC, 439 DUKE STREET, LANCASTER, PA 17602-4967 USA, 2015. s. 266-271. ISBN: 978-1-60595-270-3.
    Detail

    RAFFAI, P.; NOVOTNÝ, P.; MARŠÁLEK, O. Numerical Calculation of Mechanical Losses of the Piston Ring Pack of Internal Combustion Engines. Journal of the Balkan Tribological Association, 2015, roč. 2015, č. 4, s. 796-809. ISSN: 1310-4772.
    Detail | WWW

    ZUBÍK, M.; PROKOP, A.; ŘEHÁK, K.; NOVOTNÝ, P. The effect of the gear parameters to the noise of transmission. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2015. s. 357-362. ISSN: 2345-0533.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P. Shape Design of a Fire- ring. In Scientific Proceedings KOKA 2015. Bratislava: Slovak University of Technology in Bratislava, 2015. s. 175-184. ISBN: 978-80-227-4424- 9.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P. Design and Simulation of Progressive Crank Train. In Transport Means 2014: Proceeding of the 19th International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2015. s. 240-243. ISBN: 9955-09-935- 6. ISSN: 1822-296X.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V. Dynamic Simulation of Progressive Crank Train. In Advanced Mechatronics Solution. Advances in Intelligent Systems and Computing. 393. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer International Publishing Switzerland, 2015. s. 207-212. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
    Detail

    RAFFAI, P.; NOVOTNÝ, P.; DLUGOŠ, J. Computer Simualation of the Behavior of the Piston Ring Pack of Internal Combustion Engines. In ENGINEERING MECHANICS 2015 - 21st INTERNATIONAL CONFERENCE. Prague, Czech Republic: Academy of Sciences of the Czech Republic, v.v.i., 2015. s. 252-253. ISBN: 978-80-86246-42- 0.
    Detail

  • 2014

    NOVOTNÝ, P.; MARŠÁLEK, O.; ZUBÍK, M.; DRÁPAL, L. Analysis of Slide Bearing Computational Models Considering Elastic Deformations and Rough Surfaces. In Engineering Mechanics 2014. 1. Brno University of Technology, 2014. s. 444-447. ISBN: 978-80-214-4871-1.
    Detail

    KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Multibody Analysis of Turbocharger Rotor Dynamics. In Setkání uživatelů MSC.Software s.r.o. 2014. Brno: MSC.Software s.r.o., 2014. s. 66-73. ISBN: 978-80-260-6033- 8.
    Detail

    ZUBÍK, M.; NOVOTNÝ, P.; PROKOP, A.; JANOUŠEK, M. Virtual Powertrain – a Tool for NVH Improvement. In Setkání uživatelů MSC. SOFTWARE 2014. 1. MSC.Software s.r.o., 2014. s. 95-100. ISBN: 978-80-260-6033- 8.
    Detail

    NOVOTNÝ, P.; MARŠÁLEK, O.; KNOTEK, J.; DRÁPAL, L. Computational approaches for slide bearing modelling. In Proceedings of the 45th International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engine. I. Kostelec nad Černými lesy: CZECH UNIVERSITY OF LIFE SCIENCE PRAGUE, 2014. s. 25-32. ISBN: 978-80-7375-801- 1.
    Detail

    VOPAŘIL, J.; DRÁPAL, L.; NOVOTNÝ, P. Aircraft engine crankshaft optimisation. MECCA - Journal of Middle European Costruction and Design of Cars, 2014, roč. XII, č. 1, s. 1-6. ISSN: 1214- 0821.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P. Micro- lubrication of directionally oriented contact surfaces. In BALKANTRIB 2014 - 8th INTERNATIONAL CONFERENCE ON TRIBOLOGY. Sinaia, Romania: Petroleum- Gas University of Ploiesti Publishing House, 2014. s. 202-216. ISBN: 978-973-719-570- 8.
    Detail

    RAFFAI, P.; NOVOTNÝ, P.; MARŠÁLEK, O. Numerical Calculation of Mechanical Losses of the Piston Ring Pack of Internal Combustion Engines. In BALKANTRIB 2014 - 8th INTERNATIONAL CONFERENCE ON TRIBOLOGY. Sinaia, Romania: Petroleum- Gas University of Ploiesti Publishing House, 2014. s. 734-747. ISBN: 978-973-719-570- 8.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P. Micro- lubrication of Directionally Oriented Contact Surfaces. Tribology in Industry, 2014, roč. 36, č. 4, s. 451-465. ISSN: 0354- 8996.
    Detail | WWW

    KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Modern approach to turbocharger rotordynamic analysis. In Proceedings of the 45th International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engine. I. Kostelec nad Černými lesy: CZECH UNIVERSITY OF LIFE SCIENCE PRAGUE, 2014. s. 33-40. ISBN: 978-80-7375-801- 1.
    Detail

  • 2013

    DRÁPAL, L.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; PÍŠTĚK, V. Methods of Enhancing Mechanical Efficiency of Cranktrain. In Setkání uživatelů MSC.Software s.r.o. 2013. Příkop 4, 602 00, Brno: MSC. Software, 2013. s. 144-156. ISBN: 978-80-260-4173- 3.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P.; DRÁPAL, L.; PÍŠTĚK, V. Mixed Lubrication Simulation of Slide Bearings. In Setkání uživatelů MSC.Software s.r.o. 2013. Brno: MSC. Software, 2013. s. 157-163. ISBN: 978-80-260-4173- 3.
    Detail

    RAFFAI, P.; NOVOTNÝ, P.; PÍŠTĚK, V.; MARŠÁLEK, O.; DRÁPAL, L. Piston Rings Dynamics Simulation. In Setkání uživatelů MSC.Software s.r.o. 2013. Příkop 4, 602 00, Brno: MSC. Software, 2013. s. 139-144. ISBN: 978-80-260-4173- 3.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; PÍŠTĚK, V. Progressive Cranktrain with Low Friction Losses. In Proceedings of the XLIV. International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines. Brno: Mendelova univerzita v Brně, 2013. s. 174-183. ISBN: 978-80-7375-801- 1.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; DRÁPAL, L.; RAFFAI, P.; PÍŠTĚK, V. Comprehensive Strategy for Computational Modelling of Mixed Lubrication Regime. In Proceedings of the XLIV. International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines. Brno: Mendelova univerzita v Brně, 2013. s. 51-56. ISBN: 978-80-7375-801- 1.
    Detail

    JANOUŠEK, M.; PROKOP, A.; NOVOTNÝ, P. Locating of the Noise Sources in Automotive Industry. In Proceedings of the XLIV. International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines. Brno: Mendelova univerzita v Brně, 2013. s. 133-140. ISBN: 978-80-7375-801- 1.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V.; MARŠÁLEK, O. Advanced Crankshaft for Low Power Losses. In Deterioration, Dependability, Diagnostics. University of Defence. Brno: University of Defence, 2013. s. 229-236. ISBN: 978-80-7231-939- 8.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P.; MAUDER, T.; KLIMEŠ, L. Parameter identification of rheological models using optimization algorithms. In Mechatronics 2013: Recent Technological and Scientific Advances. Springer- Verlag, 2013. s. 193-198. ISBN: 978-3-319-02293- 2.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P.; DRÁPAL, L.; PÍŠTĚK, V. Overview of Computational Models Used for Mixed Lubrication. In Mechatronics 2013 - Recent Technological and Scientific Advances. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer- Verlag Berlin Heidelberg, 2013. s. 111-117. ISBN: 978-3-319-02293- 2.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; SVÍDA, D.; DRÁPAL, L. Efficient approach for solution of the mechanical losses of the piston ring pack. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D- JOURNAL OF AUTOMOBILE ENGINEERING, 2013, roč. 2013, č. 224, s. 1377-1388. ISSN: 0954- 4070.
    Detail

    NOVOTNÝ, P. Computational modelling as a design support in powertrain development. Brno: 2013. s. 1-30.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; PÍŠTĚK, V. A Conceptual Study of Cranktrain with Low Friction Losses. MECCA - Journal of Middle European Costruction and Design of Cars, 2013, roč. XI, č. 2, s. 6-11. ISSN: 1214- 0821.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V.; MARŠÁLEK, O. Computational Modelling of a Progressive Cranktrain. In Sborník příspěvků Mezinárodní Masarykovy konference pro doktorandy a mladé vědecké pracovníky 2013. Hradec Králové: MAGNANIMITAS, 2013. s. 3616-3625. ISBN: 978-80-87952-00- 9.
    Detail

  • 2012

    DRÁPAL, L.; PÍŠTĚK, V.; NOVOTNÝ, P.; BERAN, M. Cranktrain Dynamics Simulation. Perners' Contacts, 2012, roč. VII, č. 4, s. 26-34. ISSN: 1801- 674X.
    Detail

  • 2011

    NOVOTNÝ, P.; PÍŠTĚK, V. Virtual Engine - A Tool for a Powertrain Dynamic Solution. STROJNISKI VESTNIK- JOURNAL OF MECHANICAL ENGINEERING, 2011, roč. 2011, č. 57, s. 611-621. ISSN: 0039-2480.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L.; AMBRÓZ, R. Development of Aircraft Diesel Engine for Military Use. Advances in Military Technology, 2011, roč. 2011 (6), č. 1, s. 5-20. ISSN: 1802- 2308.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V.; AMBRÓZ, R. Crankshaft Development of a Two-stroke Compression-ignition Engine with Contra- running Pistons. MECCA - Journal of Middle European Costruction and Design of Cars, 2011, roč. IX., č. 1, s. 18-27. ISSN: 1214-0821.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Modeling of Piston Ring Pack Dynamics. MECCA - Journal of Middle European Costruction and Design of Cars, 2011, roč. 2011, č. 3, s. 12-20. ISSN: 1214- 0821.
    Detail

    DRÁPAL, L.; PÍŠTĚK, V.; NOVOTNÝ, P.; AMBRÓZ, R. Virtual Engine Application For Powertrain Dynamics. Technológ, 2011, roč. 2011, č. 3, s. 45-56. ISSN: 1337- 8996.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Simulation of Piston Ring Pack Tribology. 1. 1. Brno: University of Defence, 2011. 249 s. ISBN: 978-80-260-0633- 6.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Dynamic Simulation Of Piston Ring Pack. Technológ, 2011, roč. 2011, č. 3, s. 12-20. ISSN: 1337- 8996.
    Detail

    AMBRÓZ, R.; PÍŠTĚK, V.; NOVOTNÝ, P.; PROKOP, A. Simulation and Experimental Tools For Powertrain Noise Reduction. Technológ, 2011, roč. 2011, č. 3, s. 28-36. ISSN: 1337- 8996.
    Detail

    DRÁPAL, L.; PÍŠTĚK, V.; NOVOTNÝ, P.; AMBRÓZ, R. Virtual Prototyping as Tool for Powertrain Development. In Mechatronics Recent Technological and Scientific Advances. 1. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer- Verlag Berlin Heidelberg, 2011. s. 3-8. ISBN: 978-3-642-23243- 5.
    Detail

  • 2010

    NOVOTNÝ, P.; PÍŠTĚK, V. New efficient methods for powertrain vibration analysis. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D- JOURNAL OF AUTOMOBILE ENGINEERING, 2010, roč. 2010, č. 224, s. 611-629. ISSN: 0954- 4070.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; SVÍDA, D. Solution of powertrain friction losses by virtual engine. MECCA - Journal of Middle European Costruction and Design of Cars, 2010, roč. 2010, č. 3, s. 12-20. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P. Pevnostní kontrola hlavních částí motoru DAPL. Brno: 2010. s. 1-21.
    Detail

    VANČURA, J.; NOVOTNÝ, P.; PORTEŠ, P.; BLAŤÁK, O. Aerodynamic characteristics computation of open wheel racing car. MECCA - Journal of Middle European Costruction and Design of Cars, 2010, roč. 2010, č. 1, s. 1-6. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L.; AMBRÓZ, R. Modern computational approaches to powertrain mechanical loss solution. Perners' Contacts, 2010, roč. 2010, č. 4, s. 159-170. ISSN: 1801- 674X.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Computational Tools in 3kW Stirling Engine Development. MECCA - Journal of Middle European Costruction and Design of Cars, 2010, roč. 2010, č. 1, s. 31-36. ISSN: 1214- 0821.
    Detail

  • 2009

    NOVOTNÝ, P.; PÍŠTĚK, V.; AMBRÓZ, R. Friction Loss Analysis Of Powertrain Parts. MECCA - Journal of Middle European Costruction and Design of Cars, 2009, roč. 2009, č. 2, s. 1-5. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Virtual Engine - A Tool For Noise And Vibration Solution. MECCA - Journal of Middle European Costruction and Design of Cars, 2009, roč. 2009, č. 1, s. 1-8. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Virtual Prototype of Timing Chain Drive. Engineering Mechanics, 2009, roč. 2008, č. 1, s. 123-130. ISSN: 1802- 1484.
    Detail

  • 2008

    NOVOTNÝ, P.; PÍŠTĚK, V. Noise and Vibration Reduction - the Cranktrain as a Main Powertrain Module. TRANSACTIONS ON TRANSPORT SCIENCES, 2008, roč. 2008, č. 1, s. 21-28. ISSN: 1802- 971X.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Stirling Engine Development using Virtual Prototypes. Acta Mechanica Slovaca, 2008, roč. 2008, č. 4, s. 108-115. ISSN: 1335- 2393.
    Detail

  • 2007

    NOVOTNÝ, P.; PÍŠTĚK, V. CAE Tools in Powertrain Virtual Design Process. In Automotive - Impulse for Mechanical Engineering. 1. Magdeburg: Otto-Von- Guericke University Magdeburg, 2007. s. 145-152. ISBN: 978-3-929757-12- 5.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Multidimensional Simulation of Stirling Engine Regenerator. In SIMULATION MODELLING OF MECHATRONIC SYSTEMS III. Mechatronika. Brno: Brno University of Technology, Faculty on Mechanical Engineering, 2007. s. 205-214. ISBN: 978-80-214-3559- 9.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Non- contact Measurement of Cranktrain Vibrations. In 5. setkání uživatelů PULSE. 1. Praha: Spectris Praha spol. s r.o., 2007. s. 53-57. ISBN: 978-80-239-9240- 3.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; SVÍDA, D. Verification of Valvetrain Multi- Body Computational Model. In 5. setkání uživatelů PULSE. 1. Praha: Spectris Praha spol. s r.o., 2007. s. 58-64. ISBN: 978-80-239-9240- 3.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Heat Transfer in Stirling Engine Cylinders. In 5. setkání uživatelů PULSE. 1. Praha: Spectris Praha spol. s r.o., 2007. s. 69-75. ISBN: 978-80-239-9240- 3.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. CAE Tools in Valvetrain Design. In Nové trendy v konštrukcii a explotacii vozidel. 1. Nitra: Slovenská polnohospodářska univerzita v Nitre, 2007. s. 56-64. ISBN: 978-80-8069-942- 0.
    Detail

    NOVOTNÝ, P.; SVÍDA, D.; PÍŠTĚK, V. Tractor Cabin Acoustic Analysis. In Nové trendy v konštrukci a exploatácii vozidiel "Vozidlá 2007". Nitra: Slovenská polnohospodárska universita v Nitre, 2007. s. 183-190. ISBN: 978-80-8069-942- 0.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Crankshaft Fatigue Life Prediction of Tractor Engine. In FEMFAT User Meeting. 1. Steyr: Magna Steyr, 2007. s. 56-63.
    Detail

    SVÍDA, D.; NOVOTNÝ, P.; PÍŠTĚK, V. NVH Analysis of Tractor Cabin. In XXXVIII. medzinárodná vedecká konferencia pracovníkov katedier a pracovísk spalovacích motorov vysokých škol na Slovensku a Čechách. 1. Bratislava: Katedra automobilov, Strojnícka fakulta STU v Bratislave, 2007. s. 231-238. ISBN: 978-80-227-2714- 3.
    Detail

    SVÍDA, D.; NOVOTNÝ, P.; PÍŠTĚK, V. Simulation and Measurement of Mechanical- Acoustic Structure. In Opotřebení, Spolehlivost, Diagnostika 2007. 1. Brno: Universita Obrany, 2007. s. 295-300. ISBN: 978-80-7231-294- 8.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. New Approach to Modelling of interacions between Combustion Engine Parts. In Opotřebení spolehlivost diagnostika 2007. 1. Brno: Universita obrany, 2007. s. 205-211. ISBN: 978-80-7231-294- 8.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Stirling Engine Regenerator Model. In Opotřebení spolehlivost diagnostika 2007. 1. Brno: Universita obrany, 2007. s. 217-223. ISBN: 978-80-7231-294- 8.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. CFD Tools in Stirling Engine Virtual Design. In Recent Advances in Mechatronics. Mechatronics. Heidelberg: Springer, 2007. s. 125-132. ISBN: 978-3-540-73955- 5.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Multibody Analysis in Concept Phase of Valvetrain. MECCA - Journal of Middle European Costruction and Design of Cars, 2007, roč. 2007, č. 3, s. 8-13. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. CAE Tools in Cranktrain Design. MECCA - Journal of Middle European Costruction and Design of Cars, 2007, roč. 2007, č. 1, s. 15-21. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Camshaft Vibration Modelling in Multi- Body System. In Zborník. 1. Bratislava: KALSM SjF STU, 2007. s. 25-32. ISBN: 978-80-227-2714- 3.
    Detail

  • 2006

    PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Development Process of Modern Diesel Engines. In Sborník abstraktů XXXVII. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Kostelec nad Černými lesy: Česká zemědělská univerzita v Praze, 2006. s. 39-46. ISBN: 80-213-1510- 5.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Development of Four- cylinder Diesel Engine. In 24th CADFEM Users' Meeting 2006 - International Congress on FEM Technology with 2006 German ANSYS Conference. 1. Marktplatz 2, 85567 Grafing, GERMANY: CADFEM GmbH, 2006. s. 101-122. ISBN: 3-937523-03- 0.
    Detail

    KAPLAN, Z., PÍŠTĚK, V., NOVOTNÝ, P. Stirling Cycle and Renewable Sources of Energy. In Sborník z konference HYDROTURBO 2006. Vyhne, Slovenská republika: 2006. s. 25-34.
    Detail

    NOVOTNÝ, P. Virtual Product Development and Modern Diesel Engines. In Setkání uživatelů MSC. SOFTWARE 2006. 1. Brno: MSC.Software s.r.o., 2006. s. 2-16.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. CFD Approach to Stirling Engine Virtual Design Process. In SIMULATION MODELLING OF MECHATRONIC SYSTEMS II. Mechatronika. Brno: Brno University of Technology, Faculty on Mechanical Engineering, 2006. s. 205-214. ISBN: 80-214-3341- 8.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Stirling Engine Development Process - CFD Approach. In Opotřebení spolehlivost diagnostika 2006. 1. Brno: Universita Obrany, 2006. s. 163-168. ISBN: 80-7231-165- 4.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Heat Transfer In Cylinders of External Heat Supply Engines. In Opotřebení spolehlivost diagnostika 2006. 1. Brno: Universita Obrany, 2006. s. 205-210. ISBN: 80-7231-165- 4.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; STODOLA, J. Virtual Engine - a Tool for Military Truck Reliability Increase. Advances in Military Technology, 2006, roč. 2006, č. 1, s. 49-71. ISSN: 1802- 2308.
    Detail

    NOVOTNÝ, P. Virtual Prototype of V8 Engine Roller Bearing. In Dynamika tuhých a deformovatelných těles 2006. 4. Ústí nad Labem: Fakulta výrobních technologií a managementu UJEP Ústí n.L., 2006. s. 147-154. ISBN: 80-7044-782- 6.
    Detail

  • 2005

    KAPLAN, Z., PÍŠTĚK, V., NOVOTNÝ, P. Design of Stirling Engine Displacer. In Dynamika tuhých a deformovatelných těles 2005. Ústí nad Labem: Univerzita J.E.Purkyně v Ústí nad Labem, ÚTŘV, 2005. s. 49 ( s.)ISBN: 80-7044-688- 9.
    Detail

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Dynamics of Stirling Engine. In Dynamika tuhých a deformovatelných těles 2005. Ústí nad Labem: Univerzita J.E.Purkyně v Ústí nad Labem, ÚTŘV, 2005. s. 87 ( s.)ISBN: 80-7044-688- 9.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Multibody Analysis in Powertrain Development. In Dynamika tuhých a deformovatelných těles 2005. Ústí nad Labem: Univerzita J.E.Purkyně v Ústí nad Labem, ÚTŘV, 2005. s. 95 ( s.)ISBN: 80-7044-688- 9.
    Detail

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Stirling Engine for Combined Production of Electricity and Heat. In 8th International Conference: Traffic and Technologies for Suistanable Development. Karlovy Vary: Společnost pro trvale udržitelný život Karlovy Vary, 2005. s. 191 ( s.)ISBN: 80-903634-0- 7.
    Detail

    KAPLAN, Z., PÍŠTĚK, V., NOVOTNÝ, P. Stirling Engine and Reliability. In Opotřebení, spolehlivost, diagnostika 2005. Brno: Univerzita obrany Brno, 2005. s. 93 ( s.)ISBN: 80-7231-026- 7.
    Detail

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Dynamic Computational Model of Stirling Engine. In Opotřebení, spolehlivost, diagnostika 2005. Brno: Univerzita obrany Brno, 2005. s. 137 ( s.)ISBN: 80-7231-026- 7.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P.; KAPLAN, Z.; VLACH, R. Virtual Prototypes of External Heat Supply Engines. In Simulation Modelling of Mechatronic Systems I. Mechatronika. Brno: Faculty of Mechanical Engineering, Brno University of Technology, 2005. s. 197-206. ISBN: 80-214-3144- X.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Dynamics of in-line six- cylinder diesel engine with rubber damper. In 23rd CADFEM Users Meeting 2005. International Congress on FEM Technology. Bonn: CADFEM GmbH, 2005. s. 1-16. ISBN: 3-937523-02- 2.
    Detail

    NOVOTNÝ, P. Numerická simulace průstřelu želatinového bloku malorážovou střelou náboje ráže 9 mm Luger a 38 Special. In 1. Brno: Universita obrany, 2005. s. 35-44. ISBN: 80-85960-97- 4.
    Detail

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Virtual Prototype of Stirling Engine. Engineering Mechanics, 2005, roč. 12, č. A1, s. 45 ( s.)ISSN: 1802- 1484.
    Detail

    KAPLAN, Z.; NOVOTNÝ, P. Thermodynamics of Stirling Engine. Inženýrská mechanika - Engineering Mechanics, 2005, roč. 12, č. A1, s. 53 ( s.)ISSN: 1210- 2717.
    Detail

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Micro Combined Heat and Power Plant Based on the Stirling Engine. MECCA - Journal of Middle European Costruction and Design of Cars, 2005, roč. 2005, č. 4, s. 8-16. ISSN: 1214- 0821.
    Detail | WWW

    PÍŠTĚK, V.; NOVOTNÝ, P. Structural dynamics of the in-line six- cylinder tractor diesel engine. In Virtual Product Development Conference 2005. Mnichov: MSC.Software GmbH, Munich, Germany, 2005. s. 1-16.
    Detail

  • 2004

    PÍŠTĚK, V.; NOVOTNÝ, P. Multi- Body Analysis of Diesel Engine Dynamics. In XXXV. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Brno: Mendelova zemědělská a lesnická univerzita v Brně, 2004. s. 90 ( s.)ISBN: 80-7157-776- 6.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P.; KAPLAN, Z. Stirling Engine Displacer Piston. In Opotřebení, spolehlivost, diagnostika 2004. Brno: Vojenská akademie v Brné, 2004. s. 95 ( s.)ISBN: 80-85960-77- X.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Dynamic Analysis of Diesel V8 Cranktrain. In 12. ANSYS User Meeting. Hrubá Skála: SWS FEM , s.r.o., Brno, 2004. s. 1 ( s.)
    Detail

    NOVOTNÝ, P. Cranktrain Dynamics Simulation - Central Module of Virtual Engine. Cranktrain Dynamics Simulation - Central Module of Virtual Engine. Vědecké spisy Vysokého učení technického v Brně , Edice PhD Thesis. 1. Brno: VUT v Brně, 2004. s. 1-29. ISBN: 80-214-2884- 8. ISSN: 1213- 4198.
    Detail

    NOVOTNÝ, P. Application of Model of Lower Limb Part in Ballistic Experiments. In 1. 2004. s. 25-31.
    Detail

    NOVOTNÝ, P. Numerická simulace průstřelu želatinového bloku malorážovou střelou náboje ráže 9 mm Luger a 38 Special. In 1. Ostravice: 2004. s. 43-52.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Investigation of Cranktrain Dynamics Using Multi- Body Simulation Modeling. In Setkání uživatelů MSC. Software 2004. Brno: MSC. Software, s.r.o., Brno, 2004. s. 17 ( s.)
    Detail

  • 2003

    PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Engine Design in ANSYS and ADAMS. In MOTOR SYMPO 2003. 13th International Symposium. Brno: ČVUT v Praze, 2003. s. 45-55. ISBN: 80-02-01561- 4.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Powertrain Dynamics Solution by Virtual Engine. In XXXIV. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Sborník přednášek KOKA 2003. Liberec: Technická univerzita v Liberci, katedra strojů průmyslové dopravy, 2003. s. 104-109. ISBN: 80-7083-742- X.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Powertrain Dynamics Analyses by Virtual Engine. MECCA - Journal of Middle European Costruction and Design of Cars, 2003, roč. 1, č. 3, s. 20 ( s.)ISSN: 1214- 0821.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. ANSYS and ADAMS Tools for Design of Diesel Engines. In 11. ANSYS & STAR CD Users Meeting Česká republika a Slovensko 2003. Brno: SVS FEM s.r.o. Brno, 2003. s. I-A- 8 ( s.)ISBN: 80-239-1598- 3.
    Detail

    NOVOTNÝ, P. Simulace průstřelu ocelové desky malorážovou průbojnou střelou. In Brno: Vojenská akademie, 2003. s. 11-18.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Engine - a Tool for Reliability Increase. In Spolehlivost 2003. Brno: Vojenská akademie Brno, 2003. s. 113-118. ISBN: 80-85960-63- X.
    Detail

  • 2002

    PÍŠTĚK, V., NOVOTNÝ, P. Výpočtový model radiálního ložiska pro virtuální motor. In XXXIII. medzinárodá konferencia katedier a pracovísk spal’ ovacích motorov slovenských a českých vysokých škô. Nitra, Slovenská republika: Slovenská polnohospodárska univerzita v Nitre, 2002. s. 183 ( s.)ISBN: 80-8069-051- 0.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Simulationstechniken für die Triebwerksentwicklung. In Mechanical Engineering 2002. Bratislava: STU Bratislava, 2002. s. 1 ( s.)ISBN: 80-227-1783- 5.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. The Conversion of FE Model Between ANSYS and ADAMS System. In 10. ANSYS users Meeting. Čejkovice: SVS FEM s.r.o., 2002. s. 1 ( s.)ISBN: 80-238-9394- 7.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Powertrain Multibody Analysis with Flexible Bodies. In 3rd ADAMS Users Meeting. Špindlerův mlýn: 2002. s. 1 ( s.)
    Detail

*) Citace publikací se generují jednou za 24 hodin.