Přístupnostní navigace
E-application
Search Search Close
prof. Ing.
Ph.D.
FME, ISMMB DMAM – Professor
nahlik@fme.vutbr.cz
Send BUT message
2026
TICHOŇ, D.; VOJTEK, T.; JAMBOR, M.; DLHÝ, P.; TRSKO, L.; VLCEK, L.; NÁHLÍK, L.; HUTAŘ, P. Fatigue life prediction of weld joints: Microstructural variation can be omitted while residual stress consideration is essential. Engineering fracture mechanics, 2026, vol. 331, iss. 1, p. 1-27.
WoS Article
TICHOŇ, D.; VOJTEK, T.; DLHÝ, P.; POKORNÝ, P.; NÁHLÍK, L.; CANTELI, A.; FAJKOŠ, R.; PETER, O.; HUTAŘ, P. Stochastic assessment of residual fatigue life of railway axles considering relevant critical factors. Railway Engineering Science, 2026, vol. 33, iss. 1, p. 1-24.
SLÁMEČKA, K.; JAMBOR, M.; SKALKA, P.; KASHIMBETOVA, A.; POKLUDA, J.; NÁHLÍK, L.; HUTAŘ, P.; MONTUFAR JIMÉNEZ, E. Three-point bending fatigue behaviour of DIW-printed microporous titanium filaments for orthopaedic lattices. Materials & Design, 2026, vol. 264, iss. April, p. 1-9.
Scopus Article
2025
ŠČERBA, B.; ADAMEC, T.; POKORNÝ, P.; NÁVRAT, T.; VAJDÁK, M.; NÁHLÍK, L. Inflection point principle combined with digital image correlation and machine learning for crack length measurement in fatigue tests. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2025, vol. 139, iss. June, p. 1-17. ISSN: 0167-8442.
2024
PODUŠKA, J.; GRATZA, R.; TRÁVNÍČEK, L.; HELEŠICOVÁ, P.; NÁHLÍK, L. Numerical Calculation of Deformation, Stress Distribution and Lifetime Estimation in Buried Polymer Pipes under Various Conditions. 2024. p. 139.
Paper in proceedings outside WoS and Scopus
KUBÍČEK, R.; VOJTEK, T.; POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Equations for efficient cycle-by-cycle computation of fatigue crack retardation and acceleration due to amplitude changes. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, vol. 133, iss. 104547, p. 1-13. ISSN: 0167-8442.
VOJTEK, T.; KUBÍČEK, R.; POKORNÝ, P.; JAMBOR, M.; NÁHLÍK, L.; HUTAŘ, P. Key Issues With Residual Fatigue Life Estimation In Steels, Highly Scattered And Non-Conservative Thresholds, Crack Closure Mechanisms, Influencing Factors, Relevant Material Properties. FATIGUE 2024: Proceedings of the 9th Engineering Integrity Society International Conference on Durability & Fatigue. Farnsfield: ENGINEERING INTEGRITY SOCIETY, 2024. 691 p. ISBN: 978-0-9544368-7-2.
2023
TRÁVNÍČEK, L.; PODUŠKA, J.; KUČERA, J.; NÁHLÍK, L.; HUTAŘ, P. Comparison of fatigue performance of polyethylene pipe grades in the form of extruded and compression molded specimens. Procedia Structural Integrity, 2023, vol. 43, iss. 1, p. 148-153. ISSN: 2452-3216.
TRÁVNÍČEK, L.; PODUŠKA, J.; MESSIHA, M.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L.; HUTAŘ, P. Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes. Engineering fracture mechanics, 2023, vol. 289, iss. 1 September 2023, p. 1-18. ISSN: 0013-7944.
MILOVANOVIĆ, A.; PODUŠKA, J.; TRÁVNÍČEK, L.; NÁHLÍK, L.; SEDMAK, A.; MILOŠEVIĆ, M.; BERTO, F. Side-groove effect on fracture mechanical fatigue testing of PLA material. Procedia Structural Integrity, 2023, vol. 42, iss. 1, p. 847-856. ISSN: 2452-3216.
2022
KUBÍČEK, R.; OPLT, T.; VOJTEK, T.; NÁHLÍK, L.; HUTAŘ, P. Crack Front Shape Based on Plastic Component of CTOD. 23rd International Scientific Conference APPLIED MECHANICS 2022 – Book of Abstracts. first. Prague: Czech Technical University in Prague, 2022. p. 61.ISBN: 978-80-01-06974-5.
Abstract
DLHÝ, P.; PODUŠKA, J.; POKORNÝ, P.; JAMBOR, M.; NÁHLÍK, L.; KAJÁNEK, D.; FAJKOŠ, R.; HUTAŘ, P. Estimation of residual stress distribution in railway axles. Engineering Failure Analysis, 2022, vol. 135, iss. 1, p. 106142-1 (106142-15 p.)ISSN: 1873-1961.
DLHÝ, P.; PODUŠKA, J.; POKORNÝ, P.; JAMBOR, M.; NÁHLÍK, L.; HUTAŘ, P. Residual stress determination by the layer removal and X-ray diffraction measurement correction method. MethodsX, 2022, vol. 2022, iss. 9, p. 101768-1 (101768-15 p.)ISSN: 2215-0161.
2021
DLHÝ, P.; PODUŠKA, J.; BERER, M.; GOSCH, A.; SLÁVIK, O.; NÁHLÍK, L.; HUTAŘ, P. Crack Propagation Analysis of Compression Loaded Rolling Elements. Materials, 2021, vol. 14, iss. 10, p. 2656-1 (2656-24 p.)ISSN: 1996-1944.
POKORNÝ, P.; VOJTEK, T.; JAMBOR, M.; NÁHLÍK, L.; HUTAŘ, P. Effect of Underload Cycles on Oxide-Induced Crack Closure Development in Cr-Mo Low-Alloy Steel. Materials, 2021, vol. 14, iss. 10, p. 1-22. ISSN: 1996-1944.
2020
HUTAŘ, P.; OPLT, T.; JAMBOR, M.; NÁHLÍK, L. Numerical simulations of semi-elliptical fatigue crack propagation. AIP conference proceedings, 2020, vol. 2309, iss. -, p. 1-14. ISSN: 0094-243X.
PODUŠKA, J.; DLHÝ, P.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; NÁHLÍK, L. Design of plastic pipes considering content of recycled material. Procedia Structural Integrity, 2020, vol. 23, iss. 2019, p. 293-298. ISSN: 2452-3216.
POKORNÝ, P.; DLHÝ, P.; PODUŠKA, J.; FAJKOŠ, R.; VOJTEK, T.; NÁHLÍK, L.; GRASSO, M.; HUTAŘ, P. Influence of heat treatment-induced residual stress on residual fatigue life of railway axles. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, vol. 109, iss. 1, p. 1-13. ISSN: 0167-8442.
VOJTEK, T.; POKORNÝ, P.; OPLT, T.; JAMBOR, M.; NÁHLÍK, L.; HERRERO, D.; HUTAŘ, P. Classically determined effective Delta K fails to quantify crack growth rates. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, vol. 108, iss. 1, p. 1-13. ISSN: 0167-8442.
OPLT, T.; HUTAŘ, P.; POKORNÝ, P.; NÁHLÍK, L.; BERTO, F. Numerical evaluation of plasticity induced crack closure in 3D structures. Procedia Structural Integrity, 2020, vol. 23, iss. -, p. 101-106. ISSN: 2452-3216.
SLÁVIK, O.; HUTAŘ, P.; GOSCH, A.; BERER, M.; VOJTEK, T.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L. Fatigue crack propagation under mixed mode I and III in polyoxymethelene homopolymer. In Key Engineering Materials. Key Engineering Materials (print). Scientific.Net, 2020. iss. 827, p. 404-409. ISBN: 9783035715866. ISSN: 1013-9826.
Paper in proceedings (conference paper)
2019
DLHÝ, P.; PODUŠKA, J.; POKORNÝ, P.; NÁHLÍK, L.; FAJKOŠ, R.; HUTAŘ, P. Methodology for estimation of residual stresses in hardened railway axle. In Procedia Structural Integrity. Procedia Structural Integrity. 2019. iss. 1, p. 185-190. ISSN: 2452-3216.
PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; PINTER, G.; NÁHLÍK, L. Lifetime calculation of soil-loaded non-pressure polymer pipes. Key Engineering Materials (print), 2019, vol. 827, iss. 2020, p. 141-146. ISSN: 1013-9826.
PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Soil Load on Plastic Pipe and its Influence on Lifetime. Strojnícky časopis, 2019, vol. 69, iss. 3, p. 101-106. ISSN: 0039-2472.
VOJTEK, T.; POKORNÝ, P.; NÁHLÍK, L.; HERRERO, D.; HUTAŘ, P. Crack Closure in the Near-threshold Region in Metallic Materials. Procedia Structural Integrity, 2019, vol. 23, iss. 1, p. 481-486. ISSN: 2452-3216.
Peer-reviewed article not indexed in WoS or Scopus
OPLT, T.; ŠEBÍK, M.; BERTO, F.; NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P. Strategy of plasticity induced crack closure numerical evaluation. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, vol. 102, iss. 1, p. 59-69. ISSN: 0167-8442.
VOJTEK, T.; POKORNÝ, P.; KUBĚNA, I.; NÁHLÍK, L.; FAJKOŠ, R.; HUTAŘ, P. Quantitative dependence of oxide-induced crack closure on air humidity for railway axle steel. International Journal of Fatigue, 2019, vol. 123, iss. 1, p. 213-224. ISSN: 1879-3452.
2018
ŠTEGNEROVÁ, K.; MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L. 3D Model of Crack Propagation in Particulate Ceramic Composite Containing Residual Stresses. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (print). Zürrich, Switzerland: Trans Tech Publications Inc., 2018. iss. 1, p. 103-106. ISBN: 9783035713503. ISSN: 1013-9826.
NÁHLÍK, L.; MAJER, Z.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Lifetime Assessment of Particulate Ceramic Composite with Residual Stresses. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). Zürrich, Switzerland: Trans Tech Publications Inc., 2018. iss. 1, p. 107-110. ISBN: 978-3-0357-1168-4. ISSN: 1662-9795.
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of critical applied stress for crack initiation from a sharp V-notch. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2018, iss. 93, p. 247-262. ISSN: 0167-8442.
PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry. Engineering fracture mechanics, 2018, vol. 203, iss. 2018, p. 18-31. ISSN: 0013-7944.
DLHÝ, P.; PODUŠKA, J.; NÁHLÍK, L.; BERER, M.; GOSCH, A.; PINTER, G.; HUTAŘ, P. Compression-Loaded Cracked Cylinder – Stress Intensity Factor Evaluation. Key Engineering Materials (print), 2018, vol. 774, iss. 2018, p. 331-336. ISSN: 1013-9826.
OPLT, T.; HUTAŘ, P.; POKORNÝ, P.; NÁHLÍK, L.; CHLUP, Z.; BERTO, F. Effect of the free surface on the fatigue crack front curvature at high stress asymmetry. International Journal of Fatigue, 2018, vol. 118, iss. 2019, p. 249-261. ISSN: 0142-1123.
SLÁVIK, O.; HUTAŘ, P.; BERER, M.; GOSCH, A.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L. Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions. Key Engineering Materials (print), 2018, vol. 774, iss. 2018, p. 325-330. ISSN: 1013-9826.
2017
MAJER, Z.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; PLETZ, M.; BERMEJO, R.; NÁHLÍK, L. Residual Lifetime Determination of Low Temperature Co-Fired Ceramics. In Advances in Fracture and Damage Mechanics XV. Key Engineering Materials (web). Zürrich, Switzerland: Trans Tech Publications Inc., 2017. iss. 1, p. 266-269. ISBN: 978-3-03835-716-2. ISSN: 1662-9795.
HUTAŘ, P.; PODUŠKA, J.; ŠMÍD, M.; KUBĚNA, I.; CHLUPOVÁ, A.; NÁHLÍK, L.; POLÁK, J.; KRUML, T. Short fatigue crack behaviour under low cycle fatigue regime. International Journal of Fatigue, 2017, vol. 103, iss. October 2017, p. 207-215. ISSN: 0142-1123.
NÁHLÍK, L.; POKORNÝ, P.; FAJKOŠ, R.; HUTAŘ, P., ŠEVČÍK M., MATUŠEK P. Fatigue lifetime estimation of railway axles. Engineering Failure Analysis, 2017, vol. 2017, iss. 73, p. 139-157. ISSN: 1350-6307.
HUTAŘ, P.; POKORNÝ, P.; PODUŠKA, J.; FAJKOŠ, R.; NÁHLÍK, L. Effect of residual stresses on the fatigue lifetime of railway axle. Procedia Structural Integrity, 2017, vol. 4, iss. 2017, p. 42-47. ISSN: 2452-3216.
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; BERMEJO, R.; HUTAŘ, P. Influence of particle attributes on residual stresses in particulate ceramic composites. Solid State Phenomena, 2017, iss. 258, p. 190-193. ISSN: 1012-0394.
MAJER, Z.; NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; BERMEJO, R. Study of Influence of Residual Stresses on Crack Propagation in Particulate Ceramic Composites. In MSMF8. International Conference on Materials Structure and Micromechanics of Fracture. Solid State Phenomena. 8. Zürrich, Switzerland: Trans Tech Publications Inc., 2017. iss. 258, p. 178-181. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
OPLT, T.; POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. The Effect of the Free Surface on the Singular Stress Field at the Fatigue Crack Front. Journal of Mechanical Engineering - Strojnícky časopis, 2017, vol. 67, iss. 2, p. 69-76. ISSN: 2450-5471.
PODUŠKA, J.; HUTAŘ, P.; KUČERA, J.; SADÍLEK, J.; FRANK, A.; PINTER, G.; NÁHLÍK, L. The Effect of Residual Stress on the Process of Crack Growth Rate Determination in Polymer Pipes. Solid State Phenomena, 2017, vol. 258, iss. 2017, p. 174-177. ISSN: 1012-0394.
NÁHLÍK, L.; POKORNÝ, P.; ŠEVČÍK, M.; HUTAŘ, P. Influence of Initial Inclined Surface Crack on Estimated Residual Fatigue Lifetime of Railway Axle. Journal of multiscale modelling, 2017, vol. 7, iss. 4, p. 1-6. ISSN: 1756-9737.
2016
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Influence of variable stress ratio during train operation on residual fatigue lifetime of railway axles. Procedia Structural Integrity, 2016, vol. 2, iss. 1, p. 3585-3592. ISSN: 2452-3216.
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; MÁŠA, B.; HUTAŘ, P. A failure scenario of ceramic laminates with strong interfaces. Engineering fracture mechanics, 2016, iss. 167, p. 56-67. ISSN: 0013-7944.
MAJER, Z.; HUTAŘ, P.; FRANK, A.; ŠEVČÍK, M.; ZOUHAR, M.; PINTER, G.; NÁHLÍK, L. Point load effect on the buried polyolefin pipes lifetime. POLYMER ENGINEERING AND SCIENCE, 2016, vol. 56, iss. 1, p. 79-86. ISSN: 1548-2634.
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P.; POKORNÝ, P.; MAJER, Z. Influence of residual stresses and particle properties on mechanical response of the material in particulate ceramic composites. Key Engineering Materials (print), 2016, vol. 1, iss. 713, p. 212-215. ISSN: 1013-9826.
MAJER, Z.; NÁHLÍK, L.; HUTAŘ, P. The Role of Residual Stresses in Particulate Composite with Glass Matrix. Key Engineering Materials (print), 2016, vol. 665, iss. 1, p. 173-176. ISSN: 1013-9826.
PODUŠKA, J.; HUTAŘ, P.; KUČERA, J.; FRANK, A.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Residual stress in polyethylene pipes. POLYMER TESTING, 2016, vol. 54, iss. 1, p. 288-295. ISSN: 0142-9418.
POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Residual fatigue lifetime estimation of railway axles for various loading spectra. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2016, iss. 81, p. 25-32. ISSN: 0167-8442.
POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Influence of extension of load spectrum on estimation of residual fatigue lifetime of railway axle. Solid State Phenomena, 2016, vol. 258, iss. -, p. 607-610. ISSN: 1012-0394.
HUTAŘ, P.; PODUŠKA, J.; CHLUPOVÁ, A.; ŠMÍD, M.; KRUML, T.; NÁHLÍK, L. Description of short fatigue crack propagation under low cycle fatigue regime. Procedia Structural Integrity, 2016, vol. 2, iss. 1, p. 3010-3017. ISSN: 2452-3216.
2015
MAJER, Z.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Point load effect determination for different pressure pipe SDR series. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2015. iss. 1, p. 373-376. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Fracture Mechanics Description of Crack Propagation in Ceramic Laminates. APPLIED MECHANICS 2015 – Book of Abstracts. Thákurova 1, Praha 6: Česká technika – Nakladatelství ČVUT, 2015. p. 69.ISBN: 978-80-01-05708-7.
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of stepwise crack propagation in ceramic laminates with strong interfaces. Fracture and structural integrity, 2015, vol. 9, iss. 34, p. 116-124. ISSN: 1971-8993.
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Estimation of crack behaviour in the ceramic laminate with strong interfaces. ICSMA 17 Book of Abstracts. Brno: Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Brno, Czech Republic, 2015. p. 288.ISBN: 978-80-87434-07-9.
MAJER, Z.; NÁHLÍK, L.; MALÍKOVÁ, L. Particulate Composite Damage: The Influence of Particle Shape on Crack Path. Key Engineering Materials (print), 2015, vol. 662, iss. 1, p. 77-80. ISSN: 1013-9826.
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Influence of different crack propagation rate descriptions on the residual fatigue lifetime of railway axles. Key Engineering Materials (print), 2015, vol. 627, iss. 627, p. 469-472. ISSN: 1013-9826.
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Influence of Threshold Values on Residual Fatigue Lifetime of Railway Axles under Variable Amplitude Loading. Procedia Engineering, 2015, vol. 101, iss. 1, p. 380-385. ISSN: 1877-7058.
PODUŠKA, J.; KUČERA, J.; HUTAŘ, P.; ŠEVČÍK, M.; KŘIVÁNEK, J.; SADÍLEK, J.; NÁHLÍK, L. The Effect of Specimen Size on the Determination of Residual Stress in Polymer Pipe Wall. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Key Engineering Materials. Switzerland: TTP, 2015. iss. 627, p. 141-144. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Description of strengthening mechanism in layered ceramic composites. Key Engineering Materials (print), 2015, vol. XIV, iss. 665, p. 93-96. ISSN: 1013-9826.
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Influence of the V-notch opening angle on critical applied force values Influence of the V-notch opening angle on critical applied force values for the crack initiation from the sharp V-notch. Key Engineering Materials (print), 2015, vol. 627, iss. 2015, p. 165-168. ISSN: 1013-9826.
2014
MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Estimation of Apparent Fracture Toughness of Alumina Based Ceramic Laminate. Key Engineering Materials (print), 2014, vol. 2014, iss. 592-593, p. 405-408. ISSN: 1013-9826.
MAJER, Z.; NÁHLÍK, L. NUMERICAL ESTIMATION OF MICRO-CRACK PATHS IN POLYMER PARTICULATE COMPOSITE. In Engineering Mechanics 2014. 1. 2014. p. 376-379. ISBN: 978-80-214-4871-1.
MAJER, Z.; NÁHLÍK, L. Influence of Interphase Imperfection on Micro-Crack Behavior in Polymer Composites Filled by Rigid Particles. In Local Mechanical Properties IX. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. iss. 1, p. 194-197. ISBN: 978-3-03785-876-9. ISSN: 1013-9826.
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. The effect of threshold value on the residual fatigue lifetime of railway axles. In ENGINEERING MECHANICS 2014. 2014. p. 496-499. ISBN: 978-80-214-4871-1.
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Crack initiation from sharp V-notch tip in the case of out of plane bended specimen. Plzeň: Katedra mechaniky Fakulty aplikovaných věd Západočeské univerzity v Plzni, 2014. p. 1.
NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P. Influence of crack retardation on fatigue crack propagation in steels for railway axles. In 11th International Fatigue Congress. Zurich: 11th International Fatigue Congress, 2014. p. 351-356. ISBN: 978-3-03835-008-8.
MAJER, Z.; PLETZ, M.; KRAUTGASSER, C.; NÁHLÍK, L.; HUTAŘ, P.; BERMEJO, R. Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites. Procedia Materials Science, 2014, vol. 3, iss. 1, p. 2071-2076. ISSN: 2211-8128.
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Critical applied stresses for a crack initiation from a sharp V-notch. Fracture and structural integrity, 2014, vol. 8, iss. 30, p. 55-61. ISSN: 1971-8993.
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. ESTIMATION OF CRITICAL STRESS VALUES FOR CRACK INITIATION FROM SHARP V-NOTCHES. In Engineering Mechanics 2014. 1. Brno: ÚMTMB, FSI VUT v Brně, 2014. p. 412-415. ISBN: 978-80-214-4871-1.
MAJER, Z.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. Particulate Composite Damage: Numerical Estimation of Micro-Crack Paths. In Local Mechanical Properties X. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. iss. 1, p. 261-264. ISBN: 978-3-03835-062-0. ISSN: 1013-9826.
PODUŠKA, J.; KUČERA, J.; HUTAŘ, P.; ŠEVČÍK, M.; KŘIVÁNEK, J.; SADÍLEK, J.; NÁHLÍK, L. Residual stress distribution in extruded polypropylene pipes. POLYMER TESTING, 2014, vol. 2014, iss. 40, p. 88-98. ISSN: 0142-9418.
MAJER, Z.; ZOUHAR, M.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Pressure pipe damage: Numerical estimation of point load effect II. In Advances in Fracture and Damage Mechanics XII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. iss. 1, p. 533-536. ISBN: 978-3-03785-830-1. ISSN: 1013-9826.
POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Fatigue crack propagation in railway axles. 2014. p. 1.
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Comparison of Different Load Spectra on Residual Fatigue Lifetime of Railway Axle. Procedia Engineering, 2014, vol. 74, iss. 1, p. 313-316. ISSN: 1877-7058.
NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P.; MATUŠEK, P. Fatigue crack propagation in steels for railway axles. Key Engineering Materials (print), 2014, vol. 2014, iss. 592-593, p. 254-257. ISSN: 1013-9826.
MAJER, Z.; MARCIÁN, P.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. iss. 1, p. 445-448. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; MAJER, Z. Critical Value for Crack Propagation from Sharp V-notch. Key Engineering Materials (print), 2014, vol. 592-593, iss. 1, p. 177-180. ISSN: 1013-9826.
2013
MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Particulate Composite Materials: Numerical Modelling of Cross-linked Polymer Reinforced by Alumina Based Particles. Mechanics of composite materials, 2013, vol. 2013 (49), iss. 4, p. 421-428. ISSN: 0191-5665.
POKORNÝ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; HUTAŘ, P. DETERMINATION OF RESIDUAL FATIGUE LIFE OF RAILWAY WHEELSET. 15th International Conference, APPLIED MECHANICS 2013. 2013.
NÁHLÍK, L.; MÁŠA, B.; HUTAŘ, P. INFLUENCE OF THE INTERFACE ON THE APPARENT FRACTURE TOUGHNESS AND CRACK PROPAGATION DIRECTION IN LAYERED CERAMIC COMPOSITES. 2013. p. 7837.ISBN: 978-0-9696797-1-4.
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of critical values for crack propagation from sharp V-notch. Plzeň: Západočeská univerzita, 2013. p. 1.
MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Numerical Modelling of Particulate Composite with a Hyperelastic Matrix. Key Engineering Materials (print), 2013, vol. 525-526, iss. xxx, p. 25-28. ISSN: 1013-9826.
ZOUHAR, M.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. Pressure pipe damage: Numerical estimation of point load effect. Key Engineering Materials (print), 2013, vol. 525-526, iss. 1, p. 177-180. ISSN: 1013-9826.
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; SEITL, S. The effect of constraint level on a crack path. Engineering Failure Analysis, 2013, vol. 2013 (29), iss. 1, p. 83-92. ISSN: 1350-6307.
PETRÁČKOVÁ, K.; NÁHLÍK, L.; TRUHLÁŘ, M.; KUBĚNA, I.; HUTAŘ, P. APPLICATION OF FEM TO ESTIMATE OF MECHANICAL PROPERTIES OF THIN LAYERS. 15th International Conference, APPLIED MECHANICS 2013. 2013.
ŠEVČÍK, M.; PODUŠKA, J.; NÁHLÍK, L.; HUTAŘ, P.; KUČERA, J. Inaccuracy in Residual Stress Estimation and Its Influence on the Residual Lifetime of Polymer Pipes. Key Engineering Materials (print), 2013, vol. 2013, iss. 592-593, p. 165-168. ISSN: 1013-9826.
POKORNÝ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; HUTAŘ, P. Effects of variable loading on residual fatigue life of the railway wheelset. Key Engineering Materials (print), 2013, vol. 2014, iss. 577-578, p. 121-124. ISSN: 1013-9826.
HUTAŘ, P.; ZOUHAR, M.; NÁHLÍK, L.; ŠEVČÍK, M.; MÁŠA, B. Multilayer polymer pipes failure assessment based on a fracture mechanics approach. Engineering Failure Analysis, 2013, vol. 33, iss. 1, p. 151-162. ISSN: 1350-6307.
2012
MAJER, Z.; NÁHLÍK, L.; HUTAŘ, P. The Estimation of Micro-crack Behavior in Polymer Particulate Composite with Soft Interphase. Advanced Materials Research, 2012, vol. 482-484, iss. 1, p. 1660-1663. ISSN: 1022-6680.
ŠEVČÍK, M.; HUTAŘ, P.; ZOUHAR, M.; NÁHLÍK, L. Numerical estimation of the fatigue crack front shape for a specimen with finite thickness. International Journal of Fatigue, 2012, vol. 39, iss. 1, p. 75-80. ISSN: 0142-1123.
NÁHLÍK, L.; HUTAŘ, P.; DUŠKOVÁ, M.; DUŠEK, K.; MÁŠA, B. Numerical estimation of the macroscopic stress-strain curve of a particulate composite with crosslinked polymer matrix. Mechanics of composite materials, 2012, vol. 47, iss. 6, p. 627-634. ISSN: 0191-5665.
HUTAŘ, P.; ŠEVČÍK, M.; ZOUHAR, M.; NÁHLÍK, L.; KUČERA, J. The effect of residual stresses on crack shape in polymer pipes. Proceedings of the 4th International Conference on CRACK PATHS (CP 2012), 2012, vol. 1, iss. 1, p. 489-496. ISSN: 2281-1060.
MAJER, Z.; NÁHLÍK, L. Micro-Crack Propagation in Particulate Composite with Different Types of Matrix. Applied Mechanics and Materials, 2012, vol. 245, iss. 1, p. 138-143. ISSN: 1660-9336.
ŠEVČÍK, M.; HUTAŘ, P.; ZOUHAR, M.; NÁHLÍK, L.; KNÉSL, Z.; KUČERA, J. A Simple Method for Estimation of Residual Stresses Influence on Plastic Pipes Lifetime Prediction. In Polymeric Materials 2012. 2012. p. 134 ISBN: 978-3-86829-517-7.
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Basic modes of crack propagation through an interface in polymer layered structure. Key Engineering Materials (print), 2012, vol. 488-499, iss. 9, p. 162-165. ISSN: 1013-9826.
ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P.; ZOUHAR, M.; MÁŠA, B. Modelling of fatigue failure of gears with thin rim. 18th International Conference Engineering Mechanics 2012. 2012. p. 1309.
ŠEVČÍK, M.; HUTAŘ, P.; KNÉSL, Z.; NÁHLÍK, L.; ZOUHAR, M. Estimation of the critical configuration of a crack arrested at the interface between two materials. COMPUTATIONAL MATERIALS SCIENCE, 2012, vol. 64, iss. 5, p. 225-228. ISSN: 0927-0256.
NÁHLÍK, L.; HUTAŘ, P.; ŠEVČÍK, M.; MALÍKOVÁ, L. Determination of crack propagation direction using approach based on generalized linear elastic fracture. In The 4th International Conference on Crack Paths (CP2012). 2012. p. 1065-1072. ISBN: 9788895940441.
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; LACH, R.; KNÉSL, Z.; GRELLMANN, W. Crack growth modeling in a specimen with polymer weld. Key Engineering Materials (print), 2012, vol. 488-489, iss. -, p. 158-161. ISSN: 1013-9826.
HUTAŘ, P.; ŠEVČÍK, M.; ZOUHAR, M.; NÁHLÍK, L.; KUČERA, J. The effect of residual stresses on crack shape in polymer pipes. The Fourth International Conference on Crack Paths 2012. 2012. p. 73.
NÁHLÍK, L.; MÁŠA, B.; HUTAŘ, P. Macroscopic Behavior and Damage of a Particulate Composite with a Crosslinked Polymer Matrix. In Mechanics and Properties of Composed Materials and Structures. 1. Berlín, Německo: Springer-Verlag Berlin Heidelberg, 2012. p. 117.ISBN: 978-3-642-31497-1.
Chapter in a book
ZOUHAR, M.; NÁHLÍK, L.; HUTAŘ, P.; ŠEVČÍK, M.; KNÉSL, Z. The effect of critical distance on stability conditions for a crack at the interface between two polymer materials. Engineering Mechanics, 2012, vol. 19, iss. 2/3, p. 155-164. ISSN: 1802-1484.
MÁŠA, B.; ZOUHAR, M.; NÁHLÍK, L. Vliv reziduálních napětí v keramickém laminátu na šíření trhliny. In Víceúrovňový design pokrokových materiálů 2012. Brno: Ústav fyziky materiálů AV ČR, 2012. s. 53-58. ISBN: 978-80-87434-06-2.
NEZBEDOVÁ, E.; HUTAŘ, P.; ZOUHAR, M.; KNÉSL, Z.; SADÍLEK, J.; NÁHLÍK, L. The applicability of the Pennsylvania Notch Test for a new generation of PE pipe grades. POLYMER TESTING, 2012, vol. 32, iss. 1, p. 106-114. ISSN: 0142-9418.
MAJER, Z.; NÁHLÍK, L. MICRO-CRACK BEHAVIOUR IN POLYMER MATRIX OF PARTICULATE COMPOSITE: INFLUENCE OF NON-LINEAR MATRIX. CHEMICKE LISTY, 2012, vol. 106, iss. 1, p. 472-473. ISSN: 0009-2770.
HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; KNÉSL, Z. Fatigue crack shape prediction based on the stress singularity exponent. Key Engineering Materials (print), 2012, vol. 488-489, iss. -, p. 178-181. ISSN: 1013-9826.
HUTAŘ, P.; ŠEVČÍK, M.; KUČERA, J.; ZOUHAR, M.; LUKY, R.; NÁHLÍK, L. Effect of the residual stresses on the slow crack growth. XVI International Plastic Pipes Conference 2012. 2012.
TRUHLÁŘ, M.; KRUML, T.; KUBĚNA, I.; PETRÁČKOVÁ, K.; NÁHLÍK, L. Determination of mechanical properties from microcompression test. In Sborník Engineering Mechanics 2012. 2012. p. 1435-1440. ISBN: 978-80-86246-40-6.
HUTAŘ, P.; ZOUHAR, M.; NEZBEDOVÁ, E.; SADÍLEK, J.; ŽÍDEK, J.; NÁHLÍK, L.; KNÉSL, Z. Constraint effect on the slow crack growth in polyethylene. International Journal of Structural Integrity, 2012, vol. 3, iss. 2, p. 118-126. ISSN: 1757-9864.
ŠEVČÍK, M.; ZOUHAR, M.; MÁŠA, B.; HUTAŘ, P.; NÁHLÍK, L. On a critical geometry of a crack arrested at a bimaterail interface. In Conference Proceedings of the 14th International Conference APPLIED MECHANICS. Plzeň: Západočeská univerzita v Plzni, 2012. p. 1-4. ISBN: 978-80-261-0097-3.
PETRÁČKOVÁ, K.; KUBĚNA, I.; TRUHLÁŘ, M.; NÁHLÍK, L.; KRUML, T. Estimation of mechanical properties of thin Al surface layer. In 14th International Conference Applied Mechanics 2012. 2012. p. 117-120. ISBN: 978-80-261-0097-3.
2011
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Crack behavior in a welded polyolefin pipe. Mechanics of composite materials, 2011, vol. 47, iss. 3, p. 263-270. ISSN: 0191-5665.
HUTAŘ, P.; NÁHLÍK, L.; MAJER, Z.; KNÉSL, Z. The effect of an interphase on micro-crack behaviour in polymer composites. In Computational Modelling and Advanced Simulations. Computational Methods in Applied Sciences. Dordrecht: Springer, 2011. p. 83.ISBN: 978-94-007-0316-2.
NÁHLÍK, L.; MÁŠA, B.; HUTAŘ, P. Numerical Modeling of Macroscopic Behavior of Particulate Composite with Crosslinked Polymer Matrix. Key Engineering Materials (print), 2011, vol. 465, iss. xxx, p. 129-132. ISSN: 1013-9826.
HUTAŘ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; SEITL, S.; KRUML, T.; POLÁK, J. Fatigue crack propagation rate in EUROFER 97 estimated using small specimens. Key Engineering Materials (print), 2011, vol. 452-453, iss. -, p. 325-328. ISSN: 1013-9826.
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Generalized linear elastic fracture mechanics: an application to a crack touching the bimaterial interface. Key Engineering Materials (print), 2011, vol. 452-453, iss. XXX, p. 445-448. ISSN: 1013-9826.
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The effect of polymer pipe weld geometry on creep lifetime. Key Engineering Materials (print), 2011, vol. 465, iss. -, p. 175-178. ISSN: 1013-9826.
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Assessment of crack behaviour in a polymer pipe weld. Computational Mechanics 2011 - extended abstract. Plzeň: Západočeská univerzita, 2011. p. 1.ISBN: 978-80-261-0027-0.
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Damage of multilayer polymer materials under creep loading. Key Engineering Materials (print), 2011, vol. 2011, iss. 465, p. 153-156. ISSN: 1013-9826.
ZOUHAR, M.; VALLET, L.; HUTAŘ, P.; NÁHLÍK, L. Life time estimation of the multilayer plastic pipes. Key Engineering Materials (print), 2011, vol. 452-453, iss. -, p. 33-36. ISSN: 1013-9826.
MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Numerical Modelling of Damage of Particulate Composite with Polymer Matrix. In COMPUTATIONAL MECHANICS 2011, EXTENDED ABSTRACTS. 2011. p. 1-2. ISBN: 978-80-261-0027-0.
HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; PINTER, G.; FRANK, A.; MITEV, I. A numerical methodology for lifetime estimation of HDPE pressure pipes. Engineering fracture mechanics, 2011, vol. 78, iss. 17, p. 3049-3058. ISSN: 0013-7944.
ZOUHAR, M.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. The influence of point load on creep crack growth in polyethylene pipe. In Computational Mechanics 2011. Plzeň: University of West Bohemia Pilsen, 2011. p. 1-2. ISBN: 978-80-261-0027-0.
NÁHLÍK, L.; ZOUHAR, M.; ŠEVČÍK, M.; SEITL, S.; MAJER, Z. 13th Applied mechanics 2011 conference proceeding. 13th Applied mechanics 2011 conference proceeding. 2011. ISBN: 978-80-87434-03-1.
Conference proceedings
MÁŠA, B.; ŠEVČÍK, M.; NÁHLÍK, L. Numerické modelování porušování částicového kompozitu s polymerní matricí. In Víceúrovňový design pokrokových materiálů 2011. Brno: Ústav fyziky materiálů AV ČR, 2011. s. 87-94. ISBN: 978-80-87434-04-8.
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Effect of the time dependent material properties on the crack behaviour in the interface of two polymeric materials. Mechanics of composite materials, 2011, vol. 47, iss. 2, p. 203-210. ISSN: 0191-5665.
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; KNÉSL, Z. Crack stability condition at the interface between two polymer materials. In Applied mechanics 2011 conference proceedings. 2011. p. 247-250. ISBN: 978-80-87434-03-1.
2010
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Stress distribution description in the vicinity of the crack front in the case of thin specimens. In 12th International Scientific Conference Applied Mechanics 2010. Liberec: TU Liberec, 2010. p. 119-122. ISBN: 978-80-7372-586-0.
HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; ZOUHAR, M.; SEITL, S.; KNÉSL, Z.; FERNÁNDEZ-CANTELI, A. Fracture mechanics of the three-dimensional crack front: vertex singularity versus out of plain constraint descriptions. Procedia Engineering, 2010, vol. 2, iss. 1, p. 2095-2102. ISSN: 1877-7058.
HUTAŘ, P.; SEITL, S.; NÁHLÍK, L.; KNÉSL, Z. Fatigue crack propagation in thin structures. Key Engineering Materials (print), 2010, vol. 417-418, iss. xxx, p. 257-260. ISSN: 1013-9826.
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L. Vliv časově proměnných vlastností materiálů a způsobu zatěžování na lomové parametry bi-materiálového tělesa. In SEMDOK 2010, 15th International of PHD. students seminar. Žilina: 2010. s. 247-250. ISBN: 978-80-554-0157-7.
HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The effect of a free surface on fatigue crack behaviour. International Journal of Fatigue, 2010, vol. 32, iss. 8, p. 1265-1269. ISSN: 0142-1123.
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Description of the stress distribution around the crack front in the case of thin structures. Bulletin of Applied Mechanics, 2010, vol. 6, iss. 22, p. 30-33. ISSN: 1801-1217.
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; BERMEJO, R. Prediction of crack propagation in layered ceramics with strong interfaces. Engineering fracture mechanics, 2010, vol. 77, iss. 11, p. 2192-2199. ISSN: 0013-7944.
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Effect of the free surface on crack behaviour in cracked graded structures. In 26th conference Computational Mechanics 2010 - Extended Abstracts. University of West Bohemia, Plzeň: University of West Bohemia, Plzeň, 2010. p. 1-2. ISBN: 978-80-7043-919-7.
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L. Crack propagation through the interface between two polymer materials. In Applied and Computational Mechanics - Extended Abstracts. University of West Bohemia, Plzeň: University of West Bohemia, 2010. p. 1-2. ISBN: 978-80-7043-919-7.
2009
NÁHLÍK, L. Zobecnění lineární lomové mechaniky na případ trhliny šířící se přes rozhraní dvou materiálů. Brno: 2009. 275 s.
Habilitation thesis
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Crack propagation in the vicinity of the interface between two elastic materials. In Damage and Fracture Mechanics. Failure Analysis of Engineering Materials and Structures. Dordrecht, Nizozemí: Springer, 2009. p. 255.ISBN: 978-90-481-2668-2.
HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; MITEV, I.; FRANK, A.; PINTER, G. Numerical simulation of the failure behavior of PE pressure pipes with additional loads. In 67th Annual Technical Conference of the Society of Plastics Engineers 2009, ANTEC 2009. United States: Society of Plastics Engineers, Inc., 2009. p. 2163-2168. ISBN: 1-61567-327-X.
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. An evaluation of the stress intensity factor in functionally graded materials. Applied andComputational Mechanics, 2009, vol. 3, iss. 2, p. 401-410. ISSN: 1802-680X.
HUTAŘ, P.; ŠESTÁKOVÁ, L.; KNÉSL, Z.; NEZBEDOVÁ, E.; NÁHLÍK, L. Special fracture mechanics specimens for multilayer plastic pipes testing. POLYMER TESTING, 2009, vol. 28, iss. 8, p. 785-792. ISSN: 0142-9418.
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Evaluation of stress intensity factor in FGM. Computational Mechanics 2009. Plzeň: Západočeská univerzita, 2009. p. 1.ISBN: 978-80-7043-824-4.
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Simulace šíření trhliny ve svaru polyolefínových trubek. In Víceúrovňový design pokrokových materiálů. Brno: 2009. s. 45-52. ISBN: 978-80-254-6070-2.
HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Quantification of the influence of vertex singularities on fatigue crack behavior. COMPUTATIONAL MATERIALS SCIENCE, 2009, vol. 45, iss. 3, p. 653-657. ISSN: 0927-0256.
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Crack behaviour in laminar ceramics with strong interfaces. Key Engineering Materials (print), 2009, vol. 417-418, iss. 417-418, p. 301-304. ISSN: 1013-9826.
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Crack propagation in the vicinity of the interface in layered materials. Applied andComputational Mechanics, 2009, vol. III., iss. 1., p. 195-204. ISSN: 1802-680X.
HUTAŘ, P.; MAJER, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; KNÉSL, Z. THE INFLUENCE OF PARTICLE SIZE ON THE FRACTURE TOUGHNESS OF PP-BASED PARTICLE COMPOSITE. Mechanics of composite materials, 2009, vol. 45, iss. 3, p. 281-286. ISSN: 0191-5665.
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of apparent fracture toughness of ceramic laminates. COMPUTATIONAL MATERIALS SCIENCE, 2009, vol. 46, iss. 3, p. 614-620. ISSN: 0927-0256.
HUTAŘ, P.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; ŠEVČÍK, M.; KNÉSL, Z.; NEZBEDOVÁ, E. A fracture mechanics assessment of surface cracks existing in protective layers of multilayer composite pipes. Composite structures, 2009, vol. 92, iss. 5, p. 1120-1125. ISSN: 0263-8223.
HUTAŘ, P.; SEITL, S.; NÁHLÍK, L.; ŠEVČÍK, M.; KNÉSL, Z. Stress distribution along the 3D crack front. Computational Mechanics 2009. Plzeň: Západočeská univerzita, 2009. p. 1.ISBN: 978-80-7043-824-4.
2008
NÁHLÍK, L.; KNÉSL, Z.; KLUSÁK, J. CRACK INITIATION CRITERIA FOR SINGULAR STRESS CONCENTRATIONS, Part III: An Application to a Crack Touching a Bimaterial Interface. Engineering Mechanics, 2008, vol. 15, iss. 2, p. 99-114. ISSN: 1802-1484.
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of apparent fracture toughness of ceramic laminates based on generalized strain energy density factor. In 17th European Conference on Fracture. Brno: VUTIUM Brno, 2008. p. 1522-1529. ISBN: 9781617823190.
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of the crack propagation direction of a crack touching the interface between two elastic materials. Materials Science Forum, 2008, vol. 567-568, iss. 567-568, p. 225-228. ISSN: 0255-5476.
HUTAŘ, P.; MAJER, Z.; KNÉSL, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; PROD'HOMME, G. Computational estimation of micro-crack behaviour in polypropylene copolymer. Barcelona, Spain (Venice, Italy): 2008. p. 1.
ŠESTÁKOVÁ, L.; HUTAŘ, P.; FIEDLER, L.; NÁHLÍK, L. K-kalibrace nehomogenních zkušebních těles typu C. In 10th International Scientific Conference - Applied Mechanics 2008 (full texts of paper and extended abstracts). Gliwice, Poland: Wydawnictwo Katedry Mechaniki Stosowanej, 2008. s. 24-31. ISBN: 978-83-60102-49-7.
MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Numerical analysis of a crack approaching the interface of two dissimilar materials. Properties, Procesing, Modification, Application of Polymeric Materials. Halle/Saale, Germany: 2008. 1 p. ISBN: 978-3-940744-17-3.
KNÉSL, Z.; NÁHLÍK, L.; BAREŠ, P. Crack initiation kriteria for singular stress concentrators, Part IV: Applications to fracture of coated structures. Engineering Mechanics. Engineering Mechanics, 2008, vol. 15, iss. 4, p. 263-270. ISSN: 1802-1484.
HUTAŘ, P.; MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; KNÉSL, Z. The influence of particle size on the fracture toughness of a PP-based particle composite. Riga, Latvia: Institute of Polymer Mechanics, University of Latvia, 2008. p. 112.
HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The effect of the singularity induced by the free surface on fatigue crack growth in thin structures. Key Engineering Materials (print), 2008, vol. 385-387, iss. 385-387, p. 317-320. ISSN: 1013-9826.
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The influence of loading direction on micro-crack behaviour in polymer composite. Applied andComputational Mechanics, 2008, vol. 2, iss. 2, p. 285-290. ISSN: 1802-680X.
HUTAŘ, P.; NÁHLÍK, L. Fatigue crack shape prediction based on vertex singularity. Applied andComputational Mechanics, 2008, vol. 2, iss. 1, p. 45-53. ISSN: 1802-680X.
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Crack propagation in the vicinity of interface between two elastic materials. 5th International Conference on Fracture of Polymers, Composites and Adhesives. Les Diablerets, Switzerland: 2008. 1 p.
KNÉSL, Z.; HUTAŘ, P.; MAJER, Z.; NÁHLÍK, L. PARTICLE SHAPE EFFECT ON FRACTURE TOUGHNESS OF PP-BASED PARTICULATE COMPOSITE: ROLE OF THE INTERPHASE. Les Diablerets: Elsevier, 2008. p. 1 (1 s.).
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Estimation of the critical stress for failure of layered composite materials. IWCMM18. Beijing, China: Beijing Institute of Technology, 2008. p. 103.
NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Transverse cracking of layered structures: evaluation of fatigue crack propagation. Materials Science Forum, 2008, vol. 567-568, iss. xxx, p. 221-224. ISSN: 0255-5476.
HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z.; SEITL, S. The influence of vertex singularities on fatigue crack shape. In ECF17 - European Conference on Fracture 17. Brno: VUTIUM, 2008. p. 1060-1066. ISBN: 9781617823190.
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Numerical investigation of stress singularities in cracked bimaterial body. Key Engineering Materials (print), 2008, vol. 385-387, iss. 385-387, p. 125-128. ISSN: 1013-9826.
2007
NÁHLÍK, L.; HUTAŘ, P. INFLUENCE OF BI-MATERIAL INTERFACE AND PLASTICITY INDUCED CRACK CLOSURE ON THRESHOLD VALUES. In Engineering mechanics 2007. Praha: ÚT AV ČR, 2007. p. 1-8. ISBN: 978-80-87012-06-2.
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, J. INFLUENCE OF THE SINGULARITY INDUCED BY THE FREE SURFACE ON BEHAVIOUR OF THIN BODY WITH A V-NOTCH. In Applied Mechanics 2007 - Book of Extended Abstract. Ostrava: VŠB - Technical University of Ostrava, 2007. s. 155-156. ISBN: 978-80-248-1389-9.
HUTAŘ, P.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; KNÉSL, Z. Quantification of the influence of vertex singularities on crack behaviour. IWCMM17-Paris Book of Abstracts. Paris, France: Centre des Matériaux, 2007. p. 139.ISBN: -.
NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. The Influence of Loading Ratio on Fatigue Crack Propagation Through a Bi-material Interface. Key Engineering Materials (print), 2007, vol. 348-349, iss. 348-349, p. 317-320. ISSN: 1013-9826.
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L. Chování trhlin v tenkých ochranných vrstvách. In SEMDOK 2007. Žilina-Súlov: EDIS, 2007. s. 84-87. ISBN: 978-80-8070-639-5.
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Fracture mechanics parameters of multilayer pipes. Applied andComputational Mechanics, 2007, vol. 1, iss. 1, p. 299-306. ISSN: 1802-680X.
KNÉSL, Z.; HUTAŘ, P.; NÁHLÍK, L. EFFECT OF THE INTERFACE ON FRACTURE TOUGHNESS OF PARTICLE REINFORCED COMPOSITES. In ICCE-15 Fifteenth annual international conference on composites/nano engineering. New Orleans: University of New Orleans, 2007. p. 1-2.
KNÉSL, Z.; HUTAŘ, P.; NÁHLÍK, L.; NEZBEDOVÁ, E.; VLACH, B. ROLE OF PARTICLE SIZE AND FILLER MATRIX ADHESION ON STRESS STATE IN TERMOPLASTIC COMPOSITES. In Computational modeling and experiments of the composite materials with micro- and nano structure. Lipt. Mikuláš: 2007. p. 1-8. ISBN: 978-80-8040-321-8.
KLUSÁK, J.; KNÉSL, Z.; NÁHLÍK, L. Crack initiation criteria for singular stress concentrations Part II: Stability of sharp and bi-material notches. Engineering Mechanics, 2007, vol. 14, iss. 6, p. 409-423. ISSN: 1802-1484.
KNÉSL, Z.; KLUSÁK, J.; NÁHLÍK, L. Crack initiation criteria for singular stress concentrations Part I: A universal assessment of singular stress concentrations. Engineering Mechanics, 2007, vol. 14, iss. 6, p. 399-408. ISSN: 1802-1484.
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Influence of particles-matrix interphase on stress distribution in particulate composite with polymer matrix. Applied andComputational Mechanics, 2007, vol. 1, iss. 1, p. 143-148. ISSN: 1802-680X.
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Delaminace ochranné vrstvy způsobená povrchovou trhlinou. In SEMDOK 2007. Žilina - Súlov: EDIS, 2007. s. 105-108. ISBN: 978-80-8070-639-5.
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Vliv rozhraní vrstevnatého kompozitu na směr šíření trhliny. In 9th International Scientific Conference Applied Mechanics 2007, Book of Extended Abstracts. Ostrava: VŠB - Technická univerzita Ostrava, 2007. s. 205-206. ISBN: 978-80-248-1389-9.
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Influence of Bi-material Interface on Crack Propagation Direction in Multilayer Composite. In Engineering mechanics 2007. Svratka, CR: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i., Prague, 2007. p. 269-270. ISBN: 978-80-87012-06-2.
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of the crack propagation direction of a crack touching the interface between two elastic materials. Abstract Booklet MSMF-5. Brno: VUTIUM Brno, 2007. p. 74.ISBN: 978-80-214-3434-9.
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. ESTIMATION OF CRITICAL VALUES FOR CRACK PROPAGATION FROM SHARP V-NOTCH. In Engineering Mechanics 2007, Book of Extended Abstracts. 1. Praha: Institute of Thermomechanics, Acade,y of Science of the Czech Republic, v. , v. , v., 2007. s. 167-168. ISBN: 978-80-87012-06-2.
2006
ŠESTÁKOVÁ, L., MAJER, Z., NÁHLÍK, L., KNÉSL, Z. Numerical Analysis of a Surface Crack in Protective Layers. In Engineering mechanics 2006. Svratka, CR: Institute of Theoretical and Applied Mechanics Academy of Sciences of the Czech Republic, Prague, 2006. s. 348-349. ISBN: 80-86246-27-2.
KERŠNER, Z.; NÁHLÍK, L.; KNÉSL, Z. Influence of interfactial transition zone of cement paste - aggregate on crack propagation: finite element modelling. In Inženýrská mechanika 2006. Svratka, ČR: 2006. s. 156-157. ISBN: 80-86246-27-2.
2005
HOUFEK, L., ŠLECHTOVÁ, M., NÁHLÍK, L. Aplikovaná mechamika 2005. Aplikovaná Mechanika 2005. Brno: VUT, FSI ÚMTMB, 2005. 114 s. ISBN: 80-214-2373-0.
KNÉSL, Z.; BAREŠ, P.; NÁHLÍK, L. EVALUATION OF THE FATIGUE THRESHOLD OF COATED STRUCTURES. In ICCE-12 Twelth Annual International Conference on Composites/Nano Engineering. Tenerife, Canary Islands: 2005. p. 153-154.
NÁHLÍK, L.; KERŠNER, Z.; KNÉSL, Z. Influence of degradation of hardened cement paste on fracture behaviour of concrete. In Inženýrská mechanika 2005. Svratka, Česká Republika: 2005. s. 1-6. ISBN: 80-85918-93-5.
KNÉSL, Z.; NÁHLÍK, L.; BAREŠ, P. Failure behavior of coated materials. In 10 th International Conference on Numerical Methods in Continuum Mechanics. Žilina: University of Zilina, 2005. p. 47-48. ISBN: 80-969165-4-8.
2004
KERŠNER, Z.; NÁHLÍK, L.; KNÉSL, Z. Interaction of crack and aggregate in concrete. In Engineering mechanics 2004. Svratka: Institute of Thermomechanics Academy of Sciences of Czech Republic, 2004. s. 1-2. ISBN: 80-85918-88-9.
2003
NÁHLÍK, L.; KERŠNER, Z.; KNÉSL, Z. Modelování dvoufázového prostředí: vliv tvaru a velikosti částic. In Modelování v mechanice 2003. Ostrava, Česká Republika: 2003. s. 112-117.
KERŠNER, Z.; NÁHLÍK, L.; KNÉSL, Z. Concrete as a two phase material: statistical, sensitivity modelling of failure. In Enginering Mechanics 2003. Svratka, Česká Republika: 2003. s. 1-9.
2002
NÁHLÍK, L. Kritéria stability trhliny s vrcholem na bi-materiálovém rozhraní. In Problémy lomové mechaniky II. Brno: FAST VUT v Brně, 2002. s. 54-75. ISBN: 80-214-2129-0.
KNÉSL, Z.; NÁHLÍK, L.; KERŠNER, Z. PROBLEMATIKA TRHLIN S VRCHOLEM NA ROZHRANÍ DVOU MATERIÁLŮ. In Únava a lomová mechanika. Žinkovy: 2002. s. 1-13.
KERŠNER, Z.; NÁHLÍK, L.; KNÉSL, Z. LOMOVÁ PROCESNÍ ZÓNA BETONU: INTERAKCE TRHLINA, KAMENIVO. In Inženýrská mechanika 2002. Svratka, Česká Republika: 2002. s. 1-8.
KERŠNER, Z., NÁHLÍK, L., KNÉSL, Z. Analýza interakce kamenivo-trhlina z hlediska lomových charakteristik betonu. Beton-technologie, konstrukce, sanace, 2002, č. 5, s. 1-4. ISSN: 1213-3116.
2001
KNÉSL, Z., NÁHLÍK, L., KERŠNER, Z. Calculation of the critical stress in two-phase materials. In Structural Engineering, Mechanics and Computation. Amsterdam: ELSEVIER SCIENCE Ltd., 2001. p. 1-8. ISBN: 0-08-043948-9.
NÁHLÍK, L., KNÉSL, Z., VRBKA, J. Propagation of the fatigue crack through a protective layer. In Surface Treatment V. Computer Methods and Experimental Measurements. Southampton, Boston: WITPRESS, 2001. p. 181-190. ISBN: 1-85312-872-4.
NÁHLÍK, L., KNÉSL, Z., VRBKA, J. Propagation of a fatigue crack through a protektive layer. In Surface Treatment V. Computer methods and experimental measurements. Great Britain, Southampton, Boston: Edited by C.A. Brebia, WIT Press 2001, Southampton, Boston, 2001. 10 p. ISBN: 1-85312-872-4.
*) Citations are generated once every 24 hours.