Detail publikačního výsledku

Effect of Al-Si diffusion coating on the fatigue behavior of cast Inconel 713LC at 800 degC.

JULIŠ, M.; OBRTLÍK, K.; POSPÍŠILOVÁ, S.; PODRÁBSKÝ, T.; POLÁK, J.

Originální název

Effect of Al-Si diffusion coating on the fatigue behavior of cast Inconel 713LC at 800 degC.

Anglický název

Effect of Al-Si diffusion coating on the fatigue behavior of cast Inconel 713LC at 800 degC.

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

Cylindrical specimens of Inconel 713LC in as-received condition and with surface treatment by Al-Si diffusion coating were cyclically strained under strain control at 800 degC in air. Changes in the shape and size of the superalloy precipitates during the surface treatment are documented. The structural and hardness characteristics of the hardened surface layer are presented. Hardening/softening curves, cyclic stress-strain curves, and fatigue life curves are obtained. The sections parallel to the specimen axis and fracture surfaces have been examined to study fatigue damage mechanisms. The coating results in fatigue life improvement while the stress response of the treated material is lower in comparison with the untreated one.

Anglický abstrakt

Cylindrical specimens of Inconel 713LC in as-received condition and with surface treatment by Al-Si diffusion coating were cyclically strained under strain control at 800 degC in air. Changes in the shape and size of the superalloy precipitates during the surface treatment are documented. The structural and hardness characteristics of the hardened surface layer are presented. Hardening/softening curves, cyclic stress-strain curves, and fatigue life curves are obtained. The sections parallel to the specimen axis and fracture surfaces have been examined to study fatigue damage mechanisms. The coating results in fatigue life improvement while the stress response of the treated material is lower in comparison with the untreated one.

Klíčová slova

Low cycle fatigue; diffusion coating; Inconel 713LC; high temperature; damage mechanisms;

Klíčová slova v angličtině

Low cycle fatigue; diffusion coating; Inconel 713LC; high temperature; damage mechanisms;

Autoři

JULIŠ, M.; OBRTLÍK, K.; POSPÍŠILOVÁ, S.; PODRÁBSKÝ, T.; POLÁK, J.

Rok RIV

2011

Vydáno

15.03.2010

Nakladatel

Elsevier Ltd.

ISSN

1877-7058

Periodikum

Procedia Engineering

Svazek

2

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1983

Strany do

1989

Strany počet

7

BibTex

@article{BUT48370,
  author="Martin {Juliš} and Karel {Obrtlík} and Simona {Hutařová} and Tomáš {Podrábský} and Jaroslav {Polák}",
  title="Effect of Al-Si diffusion coating on the fatigue behavior of cast Inconel 713LC at 800 degC.",
  journal="Procedia Engineering",
  year="2010",
  volume="2",
  number="1",
  pages="1983--1989"
}