Detail publikace

Investigation on Capability of Reaming Process using Minimal Quantity Lubrication

PÍŠKA, M. DECHIFFRE, L. TOSELLO, G. MÜLLER, P.

Originální název

Investigation on Capability of Reaming Process using Minimal Quantity Lubrication

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

An investigation on reaming using minimal quantity lubrication (MQL) was carried out with the scope of documenting process capability using a metrological approach. Reaming tests were carried out on austenitic stainless steel, using HSS reamers with different cutting data and lubrication conditions. The reaming operations were compared with respect to a number of evaluation parameters, both hole quality (diameter, roundness, cylindricity and surface roughness) and cutting forces (reaming thrust and torque). Absolute average values as well as experimental standard deviations of the evaluation parameters were calculated, and uncertainty budgeting was performed for all measurands. Results show that reaming operations at lower cutting speed and feed produce low process scatter. The use of smaller depth of cut (i.e. smaller reamer diameter) resulted in larger reaming torque scatter than when a larger depth of cut was employed. The suitability of MQL for reaming was proven under the investigated process conditions, concerning both the quality of the machined holes, in terms of geometrical characteristics and surface finishing, and the process quality, with respect to reaming torque and thrust, along with their repeatability.

Klíčová slova

Reaming MQL

Autoři

PÍŠKA, M.; DECHIFFRE, L.; TOSELLO, G.; MÜLLER, P.

Rok RIV

2008

Vydáno

18. 11. 2008

Nakladatel

KTH

Místo

Stockholm

ISBN

9175197529

Kniha

Proceedings of Swedish Production Symposium

Edice

2008

Číslo edice

1

Strany od

85

Strany do

92

Strany počet

8

BibTex

@inproceedings{BUT31647,
  author="Miroslav {Píška} and Leonardo {DeChiffre} and Giuselle {Tosello} and Pavel {Müller}",
  title="Investigation on Capability of Reaming Process using Minimal Quantity Lubrication",
  booktitle="Proceedings of Swedish Production Symposium",
  year="2008",
  series="2008",
  number="1",
  pages="85--92",
  publisher="KTH",
  address="Stockholm",
  isbn="9175197529"
}