Detail publikace

Thermal properties of PLA with conductive admixtures for photo-electric applications, prepared by 3D printing

MARÁČKOVÁ, L. ZMEŠKAL, O. MENČÍK, P. PŘIKRYL, R. VACULA, J.

Originální název

Thermal properties of PLA with conductive admixtures for photo-electric applications, prepared by 3D printing

Typ

článek v časopise ve Scopus, Jsc

Jazyk

angličtina

Originální abstrakt

Currently, 3D printing is used in various industries from the production of prototypes to final products. From the point of view of sustainable development, materials based on polylactic acid (PLA) are suitable, for which it is possible to ensure controlled degradation. In terms of aesthetics, but also applicability, it is important to know the thermal properties of filaments, but also the final products with different types of additives. In the present paper, PLA samples with various pigments and conductive materials are studied. The transient step wise method was used to study the thermal properties. This method allows determining all three basic thermal parameters (thermal conductivity λ, specific heat capacity cp, and thermal diffusivity a). It was found that for samples with pigments, these parameters were in the range of values λ=(0.15 - 0.25) W/m/K, cp=(900 - 1100) J/kg/K, and a ≈ 0.15 mm2/s. For samples with electrically conductive admixtures, are the equivalent parameter in range λ=(0.22 - 0.30) W/m/K, cp=(400 - 600) J/(kg.K), a ≈ 0.17 mm2/s. It turned out that electrically conductive materials (PLA with metal admixtures) show a very good coefficient of thermal conductivity and lower specific heat capacity, while materials with admixtures of pigments show a lower thermal conductivity and higher specific heat capacity. These materials we use, in present time, for construction of boxes for measuring thermal properties of low temperature PCM materials (up to 50 °C) and an electrode system for measuring the electrical properties of thin film semiconductors and crystals.

Klíčová slova

Electrical properties and parameters; Thermal conductivity; Thermodynamic properties; Sustainable development; 3D printing; Materials properties; Polymers; Thin films; Thermal diffusivity; Industry

Autoři

MARÁČKOVÁ, L.; ZMEŠKAL, O.; MENČÍK, P.; PŘIKRYL, R.; VACULA, J.

Vydáno

12. 9. 2023

Nakladatel

AIP Publishing

ISSN

1551-7616

Periodikum

AIP Conference Proceedings

Ročník

2020

Číslo

2305

Stát

Spojené státy americké

Strany od

1

Strany do

8

Strany počet

8

URL

BibTex

@article{BUT187644,
  author="Lucie {Maráčková} and Oldřich {Zmeškal} and Přemysl {Menčík} and Radek {Přikryl} and Jan {Vacula}",
  title="Thermal properties of PLA with conductive admixtures for photo-electric applications, prepared by 3D printing",
  journal="AIP Conference Proceedings",
  year="2023",
  volume="2020",
  number="2305",
  pages="8",
  doi="10.1063/5.0163727",
  issn="1551-7616",
  url="https://doi.org/10.1063/5.0163727"
}