Detail publikace

Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings

ŽLEBEK, T. HODUL, J. DROCHYTKA, R.

Originální název

Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The objective of presented research was to verify and evaluate whether the treated hazardous waste (HW) can be used as filler in polymer coatings based on epoxy (EP) and polyurethane resin (PUR). The end product created by the incineration of municipal waste and cement dusts from cement kiln bypasses were chosen for solidification. The hazardous waste used was solidified by a homogenisation method using filter fly ash from fluidized bed combustion of lignite and silica flour as the solidifying agents. The aim was to use as much hazardous waste as possible and incorporate it into the polymer matrix of the coatings. The usability of the filler prepared in this way was verified by testing the tensile properties of polymer coatings, the surface hardness and the adhesion to the concrete. The cohesion of the coatings with concrete was observed using a digital optical microscope. It has been found that the PUR-based coatings with HW content show better properties than the coatings containing only the silica flour as a filler.

Klíčová slova

polyurethane; epoxy resin; hazardous waste; solidification; coatings; protection of concrete; mechanical parameters

Autoři

ŽLEBEK, T.; HODUL, J.; DROCHYTKA, R.

Vydáno

27. 8. 2021

Nakladatel

Trans Tech Publications Ltd.

Místo

Switzerland

ISBN

978-3-0357-1810-2

Kniha

Proceedings of the 22nd Conference on the Rehabilitation and Reconstruction of Buildings

Edice

Lenka Mészárosová

ISSN

1013-9826

Periodikum

Key Engineering Materials (print)

Ročník

898

Stát

Švýcarská konfederace

Strany od

49

Strany do

55

Strany počet

7

URL

BibTex

@inproceedings{BUT167922,
  author="Tomáš {Žlebek} and Jakub {Hodul} and Rostislav {Drochytka}",
  title="Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings",
  booktitle="Proceedings of the 22nd Conference on the Rehabilitation and Reconstruction of Buildings",
  year="2021",
  series="Lenka Mészárosová",
  journal="Key Engineering Materials (print)",
  volume="898",
  pages="49--55",
  publisher="Trans Tech Publications Ltd.",
  address="Switzerland",
  doi="10.4028/www.scientific.net/KEM.898.49",
  isbn="978-3-0357-1810-2",
  issn="1013-9826",
  url="https://www.scientific.net/KEM.898.49"
}