Detail publikace

Polymer based grout with specially treated hazardous waste

HODUL, J. ŽLEBEK, T. DROCHYTKA, R.

Originální název

Polymer based grout with specially treated hazardous waste

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The present research verified the possibility of using specially treated hazardous waste (solidification product) derived from a solidification agent (fly ash from fluidized bed combustion (FA)) and hazardous waste (end-product) as a filler in polymeric grout. Hazardous waste was pre-treated by solidification technology, while within the performed research, a total of two solidification paths were verified. One of them was a dry homogenisation (TOS1) and the other technology was wet granulation of the input materials (TOS2). The use of dry homogenization solidification technology, which is economically less demanding, seems to be more advantageous. Using such specially treated filler was verified by some selected tests and the results indicated grout with a relatively high compressive strength of about 50 MPa and a flexural strength of about 20 MPa. The developed polymeric grout also showed a very good adhesion to a cast basalt, which was tested by the pull-off test and subsequently observed in detail by optical microscope.

Klíčová slova

grout, hazardous waste, tensile strength, polymeric binder

Autoři

HODUL, J.; ŽLEBEK, T.; DROCHYTKA, R.

Vydáno

1. 7. 2019

Nakladatel

IOP Publishing

ISSN

1757-8981

Periodikum

IOP Conference Series: Materials Science and Engineering

Ročník

549

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

50

Strany do

58

Strany počet

9

URL

https://iopscience-iop-org.ezproxy.lib.vutbr.cz/article/10.1088/1757-899X/549/1/012030

BibTex

@inproceedings{BUT157632,
  author="Jakub {Hodul} and Tomáš {Žlebek} and Rostislav {Drochytka}",
  title="Polymer based grout with specially treated hazardous waste",
  booktitle="XXV International Conference and Meeting of Departments, CONSTRUMAT 2019",
  year="2019",
  journal="IOP Conference Series: Materials Science and Engineering",
  volume="549",
  number="1",
  pages="50--58",
  publisher="IOP Publishing",
  doi="10.1088/1757-899X/549/1/012030",
  issn="1757-8981",
  url="https://iopscience-iop-org.ezproxy.lib.vutbr.cz/article/10.1088/1757-899X/549/1/012030"
}