Detail publikace

Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351

PEČ, M. ŠEBEK, F. ZAPLETAL, J. PETRUŠKA, J. HASSAN, T.

Originální název

Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The plasticity models in finite element codes are often not able to describe the cyclic plasticity phenomena satisfactorily. Developing a user-defined material model is a demanding process, challenging especially for industry. Open-source Code_Aster is a rapidly expanding and evolving software, capable of overcoming the above-mentioned problem with material model implementation. In this article, Chaboche-type material model with kinematic hardening evolution rules and non-proportional as well as strain memory effects was studied through the calibration of the aluminium alloy 2024-T351. The sensitivity analysis was performed prior to the model calibration to find out whether all the material model parameters were important. The utilization of built-in routines allows the calibration of material constants without the necessity to write the optimization scripts, which is time consuming. Obtaining the parameters using the built-in routines is therefore easier and allows using the advanced modelling for practical use. Three sets of material model parameters were obtained using the built-in routines and results were compared to experiments. Quality of the calibration was highlighted and drawbacks were described. Usage of material model implemented in Code_Aster provided good simulations in a relatively simple way through the use of an advanced cyclic plasticity model via built-in auxiliary functions.

Klíčová slova

Chaboche kinematic hardening; Armstrong–Frederick model; Voce isotropic hardening; biaxial stress; ratcheting; multiaxial fatigue

Autoři

PEČ, M.; ŠEBEK, F.; ZAPLETAL, J.; PETRUŠKA, J.; HASSAN, T.

Vydáno

18. 3. 2019

Nakladatel

SAGE Publications

ISSN

1687-8140

Periodikum

Advances in Mechanical Engineering

Ročník

11

Číslo

3

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

14

Strany počet

14

URL

https://doi.org/10.1177/1687814019829982

Plný text v Digitální knihovně

http://hdl.handle.net/11012/178379

BibTex

@article{BUT155439,
  author="Michal {Peč} and František {Šebek} and Josef {Zapletal} and Jindřich {Petruška} and Tasnim {Hassan}",
  title="Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351",
  journal="Advances in Mechanical Engineering",
  year="2019",
  volume="11",
  number="3",
  pages="1--14",
  doi="10.1177/1687814019829982",
  issn="1687-8140",
  url="https://doi.org/10.1177/1687814019829982"
}