Detail publikace

Machining of 1.2363 and 1.2343ESR steels using EDM

MOURALOVÁ, K. BEDNÁŘ, J. BENEŠ, L. POLZER, A. ZAHRADNÍČEK, R. FRIES, J. PROKEŠ, T.

Originální název

Machining of 1.2363 and 1.2343ESR steels using EDM

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Electrical discharge machining (EDM) is an unconventional machining technology. It is commonly used in toolrooms to remove the material of the workpiece which in turn gains a negative shape of the electrode – the tool.In order to monitor and model the responses in the form of eroding rate and surface quality, a two-level half-factor experiment was performed with one replication at the corner points and two replications at the central points, for a total of 80 rounds. Both graphite and copper electrodes of sizes 10x10 mm and 100x100 mm were used for eroding and the influence of parameter settings: Open-voltage, Pulse current, Pulse on-time and Pulse off-time was monitored. It was foundthat the shape of the electrode and Pulse current have the most significant effect on the erosion rate.The parameters Pulse current, Pulse on-time and their mutual interaction significantly affect the surface roughness. Statistically significant factors influencing the occurrence of defects turned out to be Pulse current, Pulse on-time and Material of workpiece, where it can be seen that the material 1.2343ESR is significantly less prone to the formation of surface defects.

Klíčová slova

die- sinking EDM; steel 1.2363; steel 1.2343ESR; design of experiment; cracks; machining parameters

Autoři

MOURALOVÁ, K.; BEDNÁŘ, J.; BENEŠ, L.; POLZER, A.; ZAHRADNÍČEK, R.; FRIES, J.; PROKEŠ, T.

Vydáno

8. 6. 2023

Nakladatel

Springer nature

ISSN

1806-3691

Periodikum

Journal of the Brazilian Society of Mechanical Sciences and Engineering

Ročník

45

Číslo

7

Stát

Brazilská federativní republika

Strany počet

19

URL

https://link.springer.com/article/10.1007/s40430-023-04293-9

BibTex

@article{BUT183710,
  author="Kateřina {Mouralová} and Josef {Bednář} and Libor {Beneš} and Aleš {Polzer} and Radim {Zahradníček} and Jiří {Fries} and Tomáš {Prokeš}",
  title="Machining of 1.2363 and 1.2343ESR steels using EDM",
  journal="Journal of the Brazilian Society of Mechanical Sciences and Engineering",
  year="2023",
  volume="45",
  number="7",
  pages="19",
  doi="10.1007/s40430-023-04293-9",
  issn="1806-3691",
  url="https://link.springer.com/article/10.1007/s40430-023-04293-9"
}