Detail publikace

Use of clay from a local source for calcination and subsequent preparation of the mixed cement

ŠMÍROVÁ, B. SEDLAČÍK, M. NOVOTNÝ, R.

Originální název

Use of clay from a local source for calcination and subsequent preparation of the mixed cement

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

This paper deals with the use of calcinated clay and micronized limestone as supplementary cementitious materials (SMCs) for preparation of blended Portland cement CEM II/B-M (Q-LL). Clay used in this study was calcinated at 700°C and pozzolanic activity after calcination was assessed using accelerated R3 pozzolanic test and modified Chapelle test. The influence of calcinated clay and limestone addition on mechanical properties and hydration process was investigated and an optimal ratio for 35% clinker replacement was found. Initial decrease of mechanical strength at early ages, caused by SCM addition, was almost compensated during maturation of the binder.

Klíčová slova

calcinated clay; pozzolanic activity; sepplementary cementitious materials

Autoři

ŠMÍROVÁ, B.; SEDLAČÍK, M.; NOVOTNÝ, R.

Vydáno

23. 11. 2021

Nakladatel

IOP Publishing

ISSN

1757-8981

Periodikum

IOP Conference Series: Materials Science and Engineering

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

9

Strany počet

9

URL

Plný text v Digitální knihovně

BibTex

@inproceedings{BUT176574,
  author="Barbora {Šmírová} and Martin {Sedlačík} and Radoslav {Novotný}",
  title="Use of clay from a local source for calcination and subsequent preparation of the mixed cement",
  booktitle="International Conference Building Materials, Products and Technologies (ICBMPT 2021)",
  year="2021",
  journal="IOP Conference Series: Materials Science and Engineering",
  pages="1--9",
  publisher="IOP Publishing",
  doi="10.1088/1757-899X/1205/1/012005",
  issn="1757-8981",
  url="https://iopscience.iop.org/article/10.1088/1757-899X/1205/1/012005"
}