Detail publikačního výsledku

Evaluation of the Use of Cold Kinetic Deposition Technology on Materials Used in Electrical Engineering

BINAR, T.; ZIMÁKOVÁ, J.; SEDLAŘÍKOVÁ, M.; ŠTEINIGER, J.; KŘIVÍK, P.; ČUDEK, P.; ŘEHOŘEK, L.

Originální název

Evaluation of the Use of Cold Kinetic Deposition Technology on Materials Used in Electrical Engineering

Anglický název

Evaluation of the Use of Cold Kinetic Deposition Technology on Materials Used in Electrical Engineering

Druh

Stať ve sborníku mimo WoS a Scopus

Originální abstrakt

The work deals with a process called cold kinetic deposition. Using this technology, a copper layer was formed on a sample with an aluminum substrate by high-pressure spraying at a pressure of 25 bar. In the experimental part, the influence of corrosion degradation in the salt chamber was assessed at time cycles of 100 h, 200 h and 300 h, where changes in internal resistances before and after corrosion were measured. Subsequently, the analysis of corrosion products was performed, where the extent of corrosion attack was determined using an electron microscope. These methods led to a targeted evaluation of the boundary limits of the applied coating layer by cold kinetic deposition, after the action of corrosion.

Anglický abstrakt

The work deals with a process called cold kinetic deposition. Using this technology, a copper layer was formed on a sample with an aluminum substrate by high-pressure spraying at a pressure of 25 bar. In the experimental part, the influence of corrosion degradation in the salt chamber was assessed at time cycles of 100 h, 200 h and 300 h, where changes in internal resistances before and after corrosion were measured. Subsequently, the analysis of corrosion products was performed, where the extent of corrosion attack was determined using an electron microscope. These methods led to a targeted evaluation of the boundary limits of the applied coating layer by cold kinetic deposition, after the action of corrosion.

Klíčová slova

cold spray, corrosion, degradation

Klíčová slova v angličtině

cold spray, corrosion, degradation

Autoři

BINAR, T.; ZIMÁKOVÁ, J.; SEDLAŘÍKOVÁ, M.; ŠTEINIGER, J.; KŘIVÍK, P.; ČUDEK, P.; ŘEHOŘEK, L.

Rok RIV

2022

Vydáno

23.08.2021

Nakladatel

Brno University of Technology

Místo

Brno

ISBN

978-80-214-5975-5

Kniha

Advanced Batteries Accumulators and Fuel Cells – 22nd ABAF

Edice

1

Strany od

192

Strany do

195

Strany počet

4

BibTex

@inproceedings{BUT172887,
  author="Tomáš {Binar} and Jana {Zimáková} and Jakub {Šteiniger} and Lukáš {Řehořek} and Petr {Křivík} and Pavel {Čudek} and Marie {Sedlaříková}",
  title="Evaluation of the Use of Cold Kinetic Deposition Technology on Materials Used in Electrical Engineering",
  booktitle="Advanced Batteries Accumulators and Fuel Cells – 22nd ABAF",
  year="2021",
  series="1",
  pages="192--195",
  publisher="Brno University of Technology",
  address="Brno",
  isbn="978-80-214-5975-5"
}