Mem-Elements Emulator Design With Experimental Validation and Its Application

Mem-Elements Emulator Design With Experimental Validation and Its Application

Článek WoS

An emulator circuit of Memristor, Memcapacitor, and Meminductor commonly termed as mem-elements has been demonstrated in this article. The circuit has been realized using the technique of current mode, which provides better performance over voltage mode counterparts. The current mode analog building blocks, along with a few passive components, have been used in the presented circuit implementation. The fingerprint characteristics have been observed in both simulation and experimental results, validating the theoretical analysis. The robustness of the presented design has been supported by performing different types of analysis like process corner, temperature, and non-volatility behavior. The mem-elements emulator design has been simulated using 0.18 mu m TSMC process parameter, and +/- 1.2 V power supply has been used. The commercial ICs AD844 and CA3080 are used for the experimental demonstration of the proposed mem-elements design by making a prototype on a breadboard. A layout area of 4829 mu m(2), 8098 mu m(2), and 8061 mu m(2) respectively is required for the Memristor, Memcapacitor, and meminductor circuit. The power consumed by the mem-elements circuit is also provided. A chaotic has been implemented using mem-elements to show the usefulness of the emulator design.

An emulator circuit of Memristor, Memcapacitor, and Meminductor commonly termed as mem-elements has been demonstrated in this article. The circuit has been realized using the technique of current mode, which provides better performance over voltage mode counterparts. The current mode analog building blocks, along with a few passive components, have been used in the presented circuit implementation. The fingerprint characteristics have been observed in both simulation and experimental results, validating the theoretical analysis. The robustness of the presented design has been supported by performing different types of analysis like process corner, temperature, and non-volatility behavior. The mem-elements emulator design has been simulated using 0.18 mu m TSMC process parameter, and +/- 1.2 V power supply has been used. The commercial ICs AD844 and CA3080 are used for the experimental demonstration of the proposed mem-elements design by making a prototype on a breadboard. A layout area of 4829 mu m(2), 8098 mu m(2), and 8061 mu m(2) respectively is required for the Memristor, Memcapacitor, and meminductor circuit. The power consumed by the mem-elements circuit is also provided. A chaotic has been implemented using mem-elements to show the usefulness of the emulator design.

Memristor; memcapacitor; meminductor; pinched hysteresis loop; Chua's circuit

Memristor; memcapacitor; meminductor; pinched hysteresis loop; Chua's circuit

RAJ, N.; KUMAR RANJAN, R.; KHATEB, F.; KUMNGERN, M.

2021

24.05.2021

IEEE

PISCATAWAY

2169-3536

IEEE Access

9

1, IF: 3,367

Spojené státy americké

69860

69875

16

https://ieeexplore.ieee.org/document/9425577

http://hdl.handle.net/11012/196774

Mem-Elements Emulator Design With Experimental Validation and Its Application