Detail publikačního výsledku

Printed electrode layers for Li-ion batteries

SYROVÝ, T.; KAZDA, T.; KUBÁČ, L.; SYROVÁ, L.

Originální název

Printed electrode layers for Li-ion batteries

Anglický název

Printed electrode layers for Li-ion batteries

Druh

Stať ve sborníku mimo WoS a Scopus

Originální abstrakt

Presented study is focused on development of printed electrode layers for Li-ion batteries made by printing technologies. For fabrication of electrodes were used various printing technologies as a screen/stencil printing and micro-dispensing technique, which enabled to print electrode layers with various thickness and specific geometry of electrodes too. By printing were prepared electrode layers based on NMC electrode material for high energy density batteries. For printing of electrode layers was developed printing ink formulations with high content of electrode materials, which was generally in range of 85-95 % in dry electrode layer. By printing was fabricated NMC electrode layers with areal capacity up to 6.6 mAh/cm2 with gravimetric energy density 566 Wh/kg and specific capacity 149.6 mAh/g at 0.1 C.

Anglický abstrakt

Presented study is focused on development of printed electrode layers for Li-ion batteries made by printing technologies. For fabrication of electrodes were used various printing technologies as a screen/stencil printing and micro-dispensing technique, which enabled to print electrode layers with various thickness and specific geometry of electrodes too. By printing were prepared electrode layers based on NMC electrode material for high energy density batteries. For printing of electrode layers was developed printing ink formulations with high content of electrode materials, which was generally in range of 85-95 % in dry electrode layer. By printing was fabricated NMC electrode layers with areal capacity up to 6.6 mAh/cm2 with gravimetric energy density 566 Wh/kg and specific capacity 149.6 mAh/g at 0.1 C.

Klíčová slova

Lithium; Cathode; printing, energy density

Klíčová slova v angličtině

Lithium; Cathode; printing, energy density

Autoři

SYROVÝ, T.; KAZDA, T.; KUBÁČ, L.; SYROVÁ, L.

Rok RIV

2021

Vydáno

09.09.2020

Nakladatel

Brno University of Technology Faculty of Electrical Engineering and Communication Department of Electrical and Electronic Technology

Místo

Brno

ISBN

978-80-214-5889-5

Kniha

21st ABAF

Edice

1

Strany od

13

Strany do

15

Strany počet

3

BibTex

@inproceedings{BUT165194,
  author="Tomáš {Syrový} and Tomáš {Kazda} and Lubomír {Kubáč} and Lucie {Syrová}",
  title="Printed electrode layers for Li-ion batteries",
  booktitle="21st ABAF",
  year="2020",
  series="1",
  number="1",
  pages="13--15",
  publisher="Brno University of Technology Faculty of Electrical Engineering and Communication Department of Electrical and Electronic Technology",
  address="Brno",
  isbn="978-80-214-5889-5"
}