Detail publikačního výsledku

A magnetorheological fluid shaft seal with low friction torque

KUBÍK, M.; PAVLÍČEK, D.; MACHÁČEK, O.; STRECKER, Z.; ROUPEC, J.

Originální název

A magnetorheological fluid shaft seal with low friction torque

Anglický název

A magnetorheological fluid shaft seal with low friction torque

Druh

Článek WoS

Originální abstrakt

This paper deals with the design and tests of a magnetorheological fluid seal (MRFs) using the innovative concept of the magnetic circuit, which allows the achievement of a promising trade-off between burst pressure and friction of the seal. Low friction torque and low burst pressure are typical for a ferrofluid seal (FFs). Replacement of the ferrofluid by magnetorheological fluid increases the burst pressure of the seal but the friction torque of the seal increases too. The optimum for sealing application is low friction torque and high burst pressure. The presented design is based on the pinch mode of magnetorheological fluid. The geometry of the seal was determined by a magnetostatic model. Subsequently, the chosen concept of the seal was manufactured and tested. Pinch MRFs achieved lower friction torque than common (standard) MRFs and a higher burst pressure than any FFs.

Anglický abstrakt

This paper deals with the design and tests of a magnetorheological fluid seal (MRFs) using the innovative concept of the magnetic circuit, which allows the achievement of a promising trade-off between burst pressure and friction of the seal. Low friction torque and low burst pressure are typical for a ferrofluid seal (FFs). Replacement of the ferrofluid by magnetorheological fluid increases the burst pressure of the seal but the friction torque of the seal increases too. The optimum for sealing application is low friction torque and high burst pressure. The presented design is based on the pinch mode of magnetorheological fluid. The geometry of the seal was determined by a magnetostatic model. Subsequently, the chosen concept of the seal was manufactured and tested. Pinch MRFs achieved lower friction torque than common (standard) MRFs and a higher burst pressure than any FFs.

Klíčová slova

magnetorheological fluid seal, MR fluid seal, magnetic seal, magnetic shaft seal, liquid O-ring, burst pressure

Klíčová slova v angličtině

magnetorheological fluid seal, MR fluid seal, magnetic seal, magnetic shaft seal, liquid O-ring, burst pressure

Autoři

KUBÍK, M.; PAVLÍČEK, D.; MACHÁČEK, O.; STRECKER, Z.; ROUPEC, J.

Rok RIV

2019

Vydáno

20.03.2019

ISSN

1361-665X

Periodikum

Smart Materials and Structures

Svazek

1

Číslo

28

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

11

Strany počet

11

URL

https://iopscience.iop.org/article/10.1088/1361-665X/ab0834/meta

BibTex

@article{BUT156378,
  author="Michal {Kubík} and Dušan {Pavlíček} and Ondřej {Macháček} and Zbyněk {Strecker} and Jakub {Roupec}",
  title="A magnetorheological fluid shaft seal with low friction torque",
  journal="Smart Materials and Structures",
  year="2019",
  volume="1",
  number="28",
  pages="1--11",
  doi="10.1088/1361-665X/ab0834",
  issn="0964-1726",
  url="https://iopscience.iop.org/article/10.1088/1361-665X/ab0834/meta"
}