Detail publikačního výsledku

Improvement of Performance of Electroluminescent Panel by Reducing the Thickness of Dielectric Layer

HRABAL, M.; DZIK, P.; OMASTA, L.; VALA, M.; KALINA, M.; FLORIÁN, P.; WEITER, M.

Originální název

Improvement of Performance of Electroluminescent Panel by Reducing the Thickness of Dielectric Layer

Anglický název

Improvement of Performance of Electroluminescent Panel by Reducing the Thickness of Dielectric Layer

Druh

Článek Scopus

Originální abstrakt

Alternating-current powder-based electroluminescence is currently the only technique for quick and easy preparation of large area, low cost electroluminescent panels by the means of material printing. Manufacturing of the panels is currently done exclusively by a screen printing which is associated with deposition of much thicker layers than typical for other methods of material printing.The goal of this work is to define and optimize a composition of a novel ink jet printing formulation of dielectric film and verification of parameters of the final layers for use in this type of technology. The major benefits of ink jet printed dielectric layer are the possible preparation of a panel emitting light from both sides with reduced driving voltage needed for its operation.

Anglický abstrakt

Alternating-current powder-based electroluminescence is currently the only technique for quick and easy preparation of large area, low cost electroluminescent panels by the means of material printing. Manufacturing of the panels is currently done exclusively by a screen printing which is associated with deposition of much thicker layers than typical for other methods of material printing.The goal of this work is to define and optimize a composition of a novel ink jet printing formulation of dielectric film and verification of parameters of the final layers for use in this type of technology. The major benefits of ink jet printed dielectric layer are the possible preparation of a panel emitting light from both sides with reduced driving voltage needed for its operation.

Klíčová slova

Alternating-Current Powder-Based Electroluminescence (ACPEL), Ink jet material printing, Dielectric, Barium Titanate

Klíčová slova v angličtině

Alternating-Current Powder-Based Electroluminescence (ACPEL), Ink jet material printing, Dielectric, Barium Titanate

Autoři

HRABAL, M.; DZIK, P.; OMASTA, L.; VALA, M.; KALINA, M.; FLORIÁN, P.; WEITER, M.

Rok RIV

2020

Vydáno

27.05.2019

Nakladatel

Scientific.net

Místo

Zurich, Switzerland

Kniha

Material Science Forum

ISSN

1662-9752

Periodikum

Materials Science Forum

Číslo

955

Stát

Švýcarská konfederace

Strany od

20

Strany do

24

Strany počet

5

URL

https://www.scientific.net/MSF.955.20

BibTex

@article{BUT155775,
  author="Michal {Hrabal} and Petr {Dzik} and Lukáš {Omasta} and Martin {Vala} and Michal {Kalina} and Pavel {Florián} and Martin {Weiter}",
  title="Improvement of Performance of Electroluminescent Panel by Reducing the Thickness of Dielectric Layer",
  journal="Materials Science Forum",
  year="2019",
  number="955",
  pages="20--24",
  doi="10.4028/www.scientific.net/MSF.955.20",
  issn="1662-9752",
  url="https://www.scientific.net/MSF.955.20"
}