Detail publikačního výsledku

Comparison of Measurements Methods Intended to Determination of the Shrinkage Development in Polymer Cement Mortars

KUCHARCZYKOVÁ, B.; KAREL, O.; DANĚK, P.; KOCÁB, D.; PŐSSL, P.

Originální název

Comparison of Measurements Methods Intended to Determination of the Shrinkage Development in Polymer Cement Mortars

Anglický název

Comparison of Measurements Methods Intended to Determination of the Shrinkage Development in Polymer Cement Mortars

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

The paper deals with the experimental determination of the shrinkage progress of the polymer cement (PCC) mortars. The main motivation of performed measurements was to compare the results obtained from two different measurement procedures based on the measurement of the relative length changes and relative mass losses of the test specimens during whole time of ageing. Performed experimental analysis, focused on the determination of the progress of the relative length changes and relative mass losses, showed advantages and disadvantages of investigated measurement procedures. All performed measurements exhibited almost the same total progress of relative mass losses regardless of the used test procedure and size of specimens. The differences in the relative length changes originated from the capabilities, limitations and regulations of particular measurement procedures.

Anglický abstrakt

The paper deals with the experimental determination of the shrinkage progress of the polymer cement (PCC) mortars. The main motivation of performed measurements was to compare the results obtained from two different measurement procedures based on the measurement of the relative length changes and relative mass losses of the test specimens during whole time of ageing. Performed experimental analysis, focused on the determination of the progress of the relative length changes and relative mass losses, showed advantages and disadvantages of investigated measurement procedures. All performed measurements exhibited almost the same total progress of relative mass losses regardless of the used test procedure and size of specimens. The differences in the relative length changes originated from the capabilities, limitations and regulations of particular measurement procedures.

Klíčová slova

Shrinkage; relative length change; PCC mortar; composite

Klíčová slova v angličtině

Shrinkage; relative length change; PCC mortar; composite

Autoři

KUCHARCZYKOVÁ, B.; KAREL, O.; DANĚK, P.; KOCÁB, D.; PŐSSL, P.

Rok RIV

2018

Vydáno

20.07.2017

Nakladatel

Elsevier

Místo

Netherlands

Kniha

Procedia Engineering

Edice

Elsevier

ISSN

1877-7058

Periodikum

Procedia Engineering

Svazek

195

Číslo

(2017)

Stát

Spojené království Velké Británie a Severního Irska

Strany od

17

Strany do

23

Strany počet

7

URL

http://www.sciencedirect.com/science/article/pii/S1877705817320702

Plný text v Digitální knihovně

http://hdl.handle.net/11012/69365

BibTex

@inproceedings{BUT137952,
  author="Barbara {Kucharczyková} and Ondřej {Balkanský} and Petr {Daněk} and Dalibor {Kocáb} and Petr {Pössl}",
  title="Comparison of Measurements Methods Intended to Determination of the Shrinkage Development in Polymer Cement Mortars",
  booktitle="Procedia Engineering",
  year="2017",
  series="Elsevier",
  journal="Procedia Engineering",
  volume="195",
  number="(2017)",
  pages="17--23",
  publisher="Elsevier",
  address="Netherlands",
  doi="10.1016/j.proeng.2017.04.518",
  url="http://www.sciencedirect.com/science/article/pii/S1877705817320702"
}