Detail publikačního výsledku

Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C

OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; ŠULÁK, I.; GEJDOŠ, P.

Originální název

Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C

Anglický název

Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C

Druh

Článek WoS

Originální abstrakt

Cylindrical specimens of nickel-based superalloy Inconel 713LC in an as-cast condition and coated with a thermal barrier coating (TBC) system consisting of a CoNiCrAlY bond coat and an eutectic ceramic alumina-silica-zirconia top coat were cyclically loaded under strain control at 900°C in air. TBC was deposited using atmospheric plasma spray and waterstabilised plasma spray techniques for the bond coat and the top coat, respectively. The microstructure of the substrate material and the TBC was characterised and the hardness of TBC was measured. The cyclic stress-strain response and fatigue life of both materials were assessed. The stress response of the TBC-coated superalloy is lower than the uncoated superalloy. The detrimental effect of TBC on the Basquin curve is documented. The specimen section and fracture surface observations revealed fatigue damage mechanisms in both the TBC-coated and uncoated specimens, and that finding helps explain the differences in the fatigue behaviour of both materials.

Anglický abstrakt

Cylindrical specimens of nickel-based superalloy Inconel 713LC in an as-cast condition and coated with a thermal barrier coating (TBC) system consisting of a CoNiCrAlY bond coat and an eutectic ceramic alumina-silica-zirconia top coat were cyclically loaded under strain control at 900°C in air. TBC was deposited using atmospheric plasma spray and waterstabilised plasma spray techniques for the bond coat and the top coat, respectively. The microstructure of the substrate material and the TBC was characterised and the hardness of TBC was measured. The cyclic stress-strain response and fatigue life of both materials were assessed. The stress response of the TBC-coated superalloy is lower than the uncoated superalloy. The detrimental effect of TBC on the Basquin curve is documented. The specimen section and fracture surface observations revealed fatigue damage mechanisms in both the TBC-coated and uncoated specimens, and that finding helps explain the differences in the fatigue behaviour of both materials.

Klíčová slova

Thermal barrier coating; nickel-based superalloy; plasma spraying; high temperature fatigue; fatigue life; cyclic stress-strain curve

Klíčová slova v angličtině

Thermal barrier coating; nickel-based superalloy; plasma spraying; high temperature fatigue; fatigue life; cyclic stress-strain curve

Autoři

OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; ŠULÁK, I.; GEJDOŠ, P.

Rok RIV

2018

Vydáno

25.05.2017

ISSN

0257-8972

Periodikum

SURFACE & COATINGS TECHNOLOGY

Svazek

318

Číslo

1

Stát

Švýcarská konfederace

Strany od

374

Strany do

381

Strany počet

8

URL

http://dx.doi.org/10.1016/j.surfcoat.2017.03.003

BibTex

@article{BUT134870,
  author="Karel {Obrtlík} and Ladislav {Čelko} and Tomáš {Chráska} and Ivo {Šulák} and Pavel {Gejdoš}",
  title="Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C",
  journal="SURFACE & COATINGS TECHNOLOGY",
  year="2017",
  volume="318",
  number="1",
  pages="374--381",
  doi="10.1016/j.surfcoat.2017.03.003",
  issn="0257-8972",
  url="http://dx.doi.org/10.1016/j.surfcoat.2017.03.003"
}