Detail publikace

FATIGUE PROPERTIES OF EN AW-2618A ALUMINIUM ALLOY PRODUCED BY SELECTIVE LASER MELTING TECHNOLOGY

ZEMANOVÁ, L. KRATOCHVÍLOVÁ, V. VLAŠIC, F. MAZAL, P.

Originální název

FATIGUE PROPERTIES OF EN AW-2618A ALUMINIUM ALLOY PRODUCED BY SELECTIVE LASER MELTING TECHNOLOGY

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The aim of this study is an investigation of fatigue properties and degradation development caused by cyclic loading in EN AW-2618A aluminium alloy fabricated by selective laser melting (SLM). Recently, the growing significance of aluminium as a constructural material is evident, and due to possibility of manufacturing parts with complicated geometry, it would be beneficial to be able to produce high-strength alluminium alloys using SLM. Sets of SLM specimens using different process parameters and specimens from extruded material with the same chemical composition were produced. Bending fatigue tests using symmetric cycle at different stress amplitudes were performed. During the tests acoustic emission (AE) was recorded in order to observe processes occurring in the material. Obtained AE signal was correlated with fractographic analysis. Fatigue tests showed that extruded material had significantly better fatigue performance compared to SLM. Moreover, fatigue resistance of SLM material is strongly dependent on process parameters settings and production conditions. AE signal analysis and fractography revealed that development of damage in SLM alloy was completely different from extruded material.

Klíčová slova

fatigue; EN AW-2618A; selective laser melting; acoustic emission

Autoři

ZEMANOVÁ, L.; KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P.

Vydáno

1. 12. 2016

Nakladatel

Tanger Ltd.

ISBN

978-80-87294-66-6

Kniha

Metal 2016

Edice

1st

Strany od

1583

Strany do

1589

Strany počet

7

URL

http://apps.webofknowledge.com/full_record.do?product=WOS&search_mode=GeneralSearch&qid=1&SID=X2mt1xVlZBRT7OsPMq6&page=1&doc=1

BibTex

@inproceedings{BUT129954,
  author="Lucie {Zemanová} and Vendula {Skřivánková} and František {Vlašic} and Pavel {Mazal}",
  title="FATIGUE PROPERTIES OF EN AW-2618A ALUMINIUM ALLOY PRODUCED BY SELECTIVE LASER MELTING TECHNOLOGY",
  booktitle="Metal 2016",
  year="2016",
  series="1st",
  pages="1583--1589",
  publisher="Tanger Ltd.",
  isbn="978-80-87294-66-6",
  url="http://apps.webofknowledge.com/full_record.do?product=WOS&search_mode=GeneralSearch&qid=1&SID=X2mt1xVlZBRT7OsPMq6&page=1&doc=1"
}