Detail publikačního výsledku

Investigation of the Influence of PVD Coatings Deposited on HSS Milling Cutter

JAROŠ, A.; FIALA, Z.

Originální název

Investigation of the Influence of PVD Coatings Deposited on HSS Milling Cutter

Anglický název

Investigation of the Influence of PVD Coatings Deposited on HSS Milling Cutter

Druh

Článek Scopus

Originální abstrakt

This article deals with the benefits of PVD coatings ((Al,Ti)N; (Al,Ti,Cr)N and nanocomposite coating nACo®) applied to HSS three edges end milling cutters (producer ZPS – Frezovaci nastroje, Zlin, CZ). The coatings were synthesized by a cathodic-arc deposition process (producer Liss, Roznov pod Radhostem, CZ). Machining was carried out on the vertical milling machine FB 32V with using process liquid. Set up cutting conditions were con-stant throughout the machining. The aim of this experiment was to compare coated and uncoated HSS end milling cutters and find out the benefits of three kinds of PVD coatings. The monitored parameters were force loading and flank wear. Piezoeletrical dynamometer Kistler 9257B was used for measuring force loading and workshop opti-cal microscope was used for measuring flank wear (criterion VB). The construction steel C45E (1.1191; CSN 41 2050) was used as workpiece material. Best results were achieved by tool with PVD coating (Al,Ti,Cr)N.

Anglický abstrakt

This article deals with the benefits of PVD coatings ((Al,Ti)N; (Al,Ti,Cr)N and nanocomposite coating nACo®) applied to HSS three edges end milling cutters (producer ZPS – Frezovaci nastroje, Zlin, CZ). The coatings were synthesized by a cathodic-arc deposition process (producer Liss, Roznov pod Radhostem, CZ). Machining was carried out on the vertical milling machine FB 32V with using process liquid. Set up cutting conditions were con-stant throughout the machining. The aim of this experiment was to compare coated and uncoated HSS end milling cutters and find out the benefits of three kinds of PVD coatings. The monitored parameters were force loading and flank wear. Piezoeletrical dynamometer Kistler 9257B was used for measuring force loading and workshop opti-cal microscope was used for measuring flank wear (criterion VB). The construction steel C45E (1.1191; CSN 41 2050) was used as workpiece material. Best results were achieved by tool with PVD coating (Al,Ti,Cr)N.

Klíčová slova

PVD coating, High-speed steel, milling, force loading, flank wear

Klíčová slova v angličtině

PVD coating, High-speed steel, milling, force loading, flank wear

Autoři

JAROŠ, A.; FIALA, Z.

Rok RIV

2017

Vydáno

24.06.2016

Nakladatel

UJEP

Místo

Ústí nad Labem

ISSN

1213-2489

Periodikum

Manufacturing Technology

Svazek

2016

Číslo

3

Stát

Česká republika

Strany od

506

Strany do

512

Strany počet

7

URL

http://journal.strojirenskatechnologie.cz/templates/obalky_casopis/XVI_2016-3.pdf

BibTex

@article{BUT126871,
  author="Aleš {Jaroš} and Zdeněk {Fiala}",
  title="Investigation of the Influence of PVD Coatings Deposited on HSS Milling Cutter",
  journal="Manufacturing Technology",
  year="2016",
  volume="2016",
  number="3",
  pages="506--512",
  issn="1213-2489",
  url="http://journal.strojirenskatechnologie.cz/templates/obalky_casopis/XVI_2016-3.pdf"
}