Detail publikace

Nonlinear Elastic Wave Spectroscopy with MLS Perturbation Signal

CARBOL, L. MARTINEK, J. KUSÁK, I. KUCHARCZYKOVÁ, B.

Originální název

Nonlinear Elastic Wave Spectroscopy with MLS Perturbation Signal

Anglický název

Nonlinear Elastic Wave Spectroscopy with MLS Perturbation Signal

Jazyk

en

Originální abstrakt

The article describes a test procedure based on the fundamental principle of Nonlinear Elastic Wave Spectroscopy. Without integration of all test stages into one automated measurement station and without Maximum Length Sequence(MLS) perturbation signal, this method would be otherwise lengthy and unfit for practical application. Material nonlinearities are elegantly quantified in a single coefficient. Furthermore, in the same measurement Eigenfrequency of the sample can be estimated with greater accuracy than in conventional methods. The method is applied on thermally loaded mortar samples.

Anglický abstrakt

The article describes a test procedure based on the fundamental principle of Nonlinear Elastic Wave Spectroscopy. Without integration of all test stages into one automated measurement station and without Maximum Length Sequence(MLS) perturbation signal, this method would be otherwise lengthy and unfit for practical application. Material nonlinearities are elegantly quantified in a single coefficient. Furthermore, in the same measurement Eigenfrequency of the sample can be estimated with greater accuracy than in conventional methods. The method is applied on thermally loaded mortar samples.

Plný text v Digitální knihovně

http://hdl.handle.net/11012/69368

Dokumenty

BibTex 


@inproceedings{BUT126945,
  author="Ladislav {Carbol} and Jan {Martinek} and Ivo {Kusák} and Barbara {Kucharczyková}",
  title="Nonlinear Elastic Wave Spectroscopy with MLS Perturbation Signal",
  annote="The article describes a test procedure based on the fundamental principle of Nonlinear Elastic Wave Spectroscopy. Without integration of all test stages into one automated measurement station and without Maximum Length Sequence(MLS) perturbation signal, this method would be otherwise lengthy and unfit for practical application. Material nonlinearities are elegantly quantified in a single coefficient. Furthermore, in the same measurement Eigenfrequency of the sample can be estimated with greater accuracy than in conventional methods. The method is applied on thermally loaded mortar samples.",
  address="Výzkumný ústav stavebních hmot,a.s.",
  booktitle="Elektronický sborník přednášek",
  chapter="126945",
  doi="10.1016/j.proeng.2016.07.365",
  howpublished="electronic, physical medium",
  institution="Výzkumný ústav stavebních hmot,a.s.",
  year="2016",
  month="may",
  pages="1--7",
  publisher="Výzkumný ústav stavebních hmot,a.s.",
  type="conference paper"
}