Přístupnostní navigace
E-application
Search Search Close
Project detail
Duration: 1.7.2012 — 30.6.2015
Funding resources
Evropská unie - OP VK - Oblast podpory 2.3 - Lidské zdroje ve VaV
On the project
Cílem tohoto celouniverzitního projektu je podpořit tvorbu excelentních týmů na VUT v Brně zapojením nových spolupracovníků z jiných institucí do činnosti výzkumných a vývojových týmů na postdoktorandských pozicích na VUT v Brně s důrazem na internacionalizaci, multidisciplinaritu, intersektorální mobilitu a spolupráci. V rámci projektu budou vytvořena nová pracovní místa pro postdoktorandy. Ti budou po dobu projektu pracovat spolu se svými mentory na plánovaných výzkumných záměrech.
Description in EnglishThe main goal of this university project is to support the establishment of excellency teams at BUT in Brno by the engagement of new coworkers from other institutions into the activities of research and developing teams at postgraduate positions at BUT Brno with emphasis to internationalisation, multidisciplinarity and intersectoral mobility and cooperation.
Mark
EE2.3.30.0039
Default language
Czech
People responsible
Tomešová Lucie, Ing., MPA - principal person responsibleBadíková Iveta, Ing. - fellow researcherBejček Vlastimil, Ing., CSc. - fellow researcherDobai Roland, Ing., Ph.D. - fellow researcherHruška Tomáš, prof. Ing., CSc. - fellow researcherKotoul Michal, prof. RNDr., DrSc. - fellow researcherPřikryl Zdeněk, Ing., Ph.D. - fellow researcherSekanina Lukáš, prof. Ing., Ph.D. - fellow researcherZemčík Pavel, prof. Dr. Ing., dr. h. c. - fellow researcher
Units
Project Support Centre- responsible department (1.11.2016 - not assigned)Central European Institute of Technology BUT- co-beneficiary (25.7.2012 - not assigned)Department of Computer Graphics and Multimedia - co-beneficiary (1.7.2012 - 30.6.2015)Department of Computer Systems- co-beneficiary (1.7.2012 - 30.6.2015)Department of Information Systems- co-beneficiary (1.7.2012 - 30.6.2015)Faculty of Electrical Engineering and Communication- co-beneficiary (1.7.2012 - not assigned)Faculty of Mechanical Engineering- co-beneficiary (1.7.2012 - 30.6.2015)Rector's Office- beneficiary (1.7.2012 - not assigned)
Results
DOKOUPIL, J.: 54th IEEE Conference on Decision and Control. Osaka (15.12.2015)Detail
DOKOUPIL, J.: 2nd International Conference on Applied Mechanics and Mechanical Automation. Hong Kong (19.04.2015)Detail
DOKOUPIL, J.: 4th International Conference on Mathematical Modeling in Physical Sciences. Mykonos (05.06.2015)Detail
KOVALENKO, A.; YADAV, R.; VALA, M.; WEITER, M.: xx; Organický solární článek s uspořádanými feritovými nanočásticemi. xx. (Funkční vzorek)Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: xx; Mapa hydrologických poměrů v Mikroregionu Hodonínsko. xx. (Specializovaná mapa s odborným obsahem)Detail
SOBOTKOVÁ, V.; DUMBROVSKÝ, M.: xx; Prostorová lokalizace míst potenciálního vzniku efemerních rýh v modelovém území okresu Nový Jičín. xx. (Specializovaná mapa s odborným obsahem)Detail
MARTON, D.; STARÝ, M.: xx; LRMsoft - generátor umělých měsíčních průtoků. xx. URL: http://uvhk.fce.vutbr.cz/software.php. (Software)Detail
SOBOTKOVÁ, V.; DUMBROVSKÝ, M.: xx; Prostorová lokalizace erozního smyvu při R40 v okrese Nový Jičín. xx. (Specializovaná mapa s odborným obsahem)Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: xx; Vymezení zemních teras, kategorizace podle typu zemních teras a jejich poškození. xx. (Specializovaná mapa s odborným obsahem)Detail
MIKULKA, J.; SEDLÁK, J.: xx; Modul pro plynovou zkoušku automobilového filtru. xx. (Funkční vzorek)Detail
MACKŮ, R.; ŠKARVADA, P.: xx; Solar Hybrid System Isolation Converter v. 1.7. xx. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/solar-hybrid-system-isolation-converter-v-1-7. (Funkční vzorek)Detail
KOKTAVÝ, P.; KOKTAVÝ, B.; TRČKA, T.; ŠTOUDEK, R.; MACKŮ, R.: xx; Kapacitní senzor pro měření elektromagnetické emise. xx. URL: http://fyzika.fce.vutbr.cz/pub/Kapacitni%20senzor%202013.pdf. (Funkční vzorek)Detail
MIKULKA, J.: xx; Dendrochronology. xx. URL: http://www.utee.feec.vutbr.cz/?q=cs/software-pro-dendrochronologicke-datovani. (Software)Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: xx; Mapa erozního smyvu po zhutnění půdy. xx. (Specializovaná mapa s odborným obsahem)Detail
ŠIKULA, O.; PLÁŠEK, J.: xx; Calculation Area verze 4.0 Education (CalA 4.0e). xx. URL: http://www.fce.vutbr.cz/TZB/sikula.o/cala_uvod.html. (Software)Detail
MARTON, D.; STARÝ, M.; MENŠÍK, P.: xx; UNCERESERVOIR - Vodohospodářské řešení zásobní funkce nádrže. xx. URL: http://uvhk.fce.vutbr.cz/software.php. (Software)Detail
SEDLÁK, J.; DUSBABA, M.: xx; Válec motoru Jawa 50. xx. (Funkční vzorek)Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: xx; Rozlišení zemních teras z hlediska jejich využití. xx. (Specializovaná mapa s odborným obsahem)Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: xx; Mapa erozní ohroženosti zemědělských půd vodní erozí v Mikroregionu Hodonínsko. xx. (Specializovaná mapa s odborným obsahem)Detail
ŠIMŮNKOVÁ, H.: xx; Elektrochemická cela s upevněnou pomocnou a referenční elektrodou. xx. URL: http://www.umel.feec.vutbr.cz/LabSensNano/products.aspx?id=108. (Funkční vzorek)Detail
MACKŮ, R.; VONDRA, M.: xx; Alkaline Fuel Cell Autonomous Power Supply v. 2.0. xx. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/alkaline-fuel-cell-autonomous-power-supply-v-2-0. (Funkční vzorek)Detail
SEDLÁK, J.; SAMOHÝL, L.: xx; Přední díl upínacího systému horolezecké mačky. xx. (Funkční vzorek)Detail
ROUPEC, J.; KUBÍK, M.; MAZŮREK, I.; STRECKER, Z.: xx; Testovací magnetický obvod reometru. xx. URL: http://dl.uk.fme.vutbr.cz/zobraz_soubor.php?id=2250. (Funkční vzorek)Detail
MACKŮ, R.; ŠICNER, J.: xx; Voltage Profile Unit v. 4.0. xx. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/voltage-profile-unit-v-4-0. (Funkční vzorek)Detail
SOBOTKOVÁ, V.; DUMBROVSKÝ, M.: xx; Identifikace míst povodňového ohrožení v modelovém území okresu Nový Jičín. xx. (Specializovaná mapa s odborným obsahem)Detail
MIKULKA, J.; SEDLÁK, J.: xx; Prosvětlovací stůl. xx. (Funkční vzorek)Detail
MACKŮ, R.; TRČKA, T.: xx; AFC Central Power Unit v. 1.0. xx. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/AFC-central-power-unit-v-1-0. (Funkční vzorek)Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: xx; Kategorizace zemních teras z hlediska ozelenění terasových svahů. xx. (Specializovaná mapa s odborným obsahem)Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: xx; Mapa hydrologických poměrů v Mikroregionu Podluží. xx. (Specializovaná mapa s odborným obsahem)Detail
SEDLÁK, J.: xx; Skořepinový implantát femorální komponenty. xx. (Funkční vzorek)Detail
MENŠÍK, P.; STARÝ, M.: xx; Operativní řízení hydroenergetické funkce nádrže. xx. URL: http://uvhk.fce.vutbr.cz/software.php. (Software)Detail
MIKULKA, J.; FIALA, P.: xx; Dendrochronologická čtečka. xx. URL: http://www.utee.feec.vutbr.cz/?q=cs/dendrochronologicka-ctecka. (Funkční vzorek)Detail
MACKŮ, R.; GRMELA, L.: xx; Start and Battery Unit v. 2.0. xx. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/start-and-battery-unit-v-2-0. (Funkční vzorek)Detail
MIKULKA, J.; SEDLÁK, J.: xx; Modul akustické kontroly automobilových filtrů. xx. (Funkční vzorek)Detail
MACKŮ, R.; KOKTAVÝ, P.; SEDLÁK, P.; SMULKO, J.; TRAWKA, M. Analytical fluctuation enhanced sensing by resistive gas sensors. Sensors and Actuators B: Chemical, 2015, vol. 2015, no. 213, p. 390-396. ISSN: 0925-4005.Detail
LEŠTINSKÝ, P.; BRUMMER, V.; JECHA, D.; SKRYJA, P.; STEHLÍK, P. Design of catalytic oxidation unit for elimination of VOC and CO. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2014, vol. 53, no. 2, p. 732-737. ISSN: 0888-5885.Detail
ŠIMŠÍKOVÁ, M. Interaction of graphene oxide with albumins: Effect of size, pH, and temperature. ARCHIVES OF BIOCHEMISTRY AND BIOPHYSICS, 2016, vol. 593, no. 1, p. 69-79. ISSN: 0003-9861.Detail
STRAKOVÁ FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; SLÁVIK, M.; SEDLAŘÍKOVÁ, M. Corrosion in Li-S batteries based on conversion reaction. Corrosion in power industry 2014. 2014. p. 14-14. ISBN: 978-80-553-1715-1.Detail
KLOC, P.; MAZÁNKOVÁ, V.; ELIÁŠ, M.; TRUNEC, D.; ZAJÍCKOVÁ, L. Investigation of barrier discharge in argon with acetylene and methane admixture and heated electrode. XXXI International Conference of Phenomena in Ionized Gases. Granada: 2013. p. PS3-060 (PS3-063 p.)ISBN: N.Detail
MÁŠA, V.; TOUŠ, M.; PAVLAS, M. Using a utility system grey-box model as a support tool for progressive energy management and automation of buildings. Clean Technologies and Environmental Policy, 2016, vol. 18, no. 1, p. 195-208. ISSN: 1618-954X.Detail
KUNZ, L.; FINTOVÁ, S. Initiation of Fatigue Cracks in Ultrafine-grained Materials in High-cycle Fatigue Region. Procedia Engineering, 2014, vol. 74, no. 1, p. 2-5. ISSN: 1877-7058.Detail
INGELI, R.; MINAROVIČOVÁ, K.; ČEKON, M. Architectural elements with respect to the energy performance of buildings. In Contemporary Problems in Architecture and Construction. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 561-565. ISBN: 978-3-03835-237-2. ISSN: 1022-6680.Detail
LEŠTINSKÝ, P.; VEČEŘ, M.; NAVRÁTIL, P.; STEHLÍK, P. The removal of CO2 from biogas using a laboratory PSA unit: design using breakthrough curves. Clean Technologies and Environmental Policy, 2015, vol. 17, no. 5, p. 1281-1289. ISSN: 1618-954X.Detail
EKSIOGLU, Y.; PETRÁČEK, J. Self-pulsing and chaos in coupled ring resonators with non-instantaneous Kerr-nonlinear response. In Proc. 14th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2014, Postdeadline papers. 2014. p. 1-2. ISBN: 9781479936823.Detail
BROUKAL, J.; HÁJEK, J.; VONDÁL, J. An experimental study of effervescent sprays: axial evolution of mean drop diameter. In 26th European Conference on Liquid Atomization & Spray Systems. Bremen, Germany: 2014. p. 1-6. ISBN: 978-3-88722-744-9.Detail
KOLLÁROVÁ, V.; ČOLLÁKOVÁ, J.; DOSTÁL, Z.; SLABÝ, T.; VESELÝ, P.; CHMELÍK, R. Quantitative phase imaging through scattering media. In Quantitative Phase Imaging. San Francisco, CA: SPIE-INT SOC OPTICAL ENGINEERING, 1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA, 2015. p. 93360T-1 (93360T-8 p.)ISBN: 978-1-62841-426-4.Detail
ČEKON, M.; ROVNANÍK, P. Optical performance of colored crystalline solar cells for building energy efficient application. Procedia Manufacturing, 2015, vol. 2, no. 2, p. 342-347. ISSN: 2351-9789.Detail
ČEKON, M.; KALOUSEK, M.; INGELI, R. Thermal performance effect of hollow ceramic micro-spheres coating assessed by dynamic outdoor testing in the summer season. In 2nd Central European Symposium on Building Physics. RSA, Vienna, Austria. Vídeň, Rakousko: RSA, Vienna, Austria, 2013. p. 149-156. ISBN: 978-3-85437-321-6.Detail
STRAKOVÁ FEDORKOVÁ, A. Nová generace lithiových baterií s konverzní katodou. Energetika, 2014, roč. 2014, č. 2, s. 115-116. ISSN: 0375-8842.Detail
EKSIOGLU, Y.; CETIN , A. E.; PETRÁČEK, J. Optical Response of Plasmonic Nanohole Arrays: Comparison of Square and Hexagonal Lattices. Plasmonics, 2016, vol. 11, no. 3, p. 852-856. ISSN: 1557-1955.Detail
SEDLÁK, J.; ŘÍČAN, D.; PÍŠKA, M.; ROZKOŠNÝ, L. Study of materials produced by powder metallurgy using classical and modern additive laser technology. Procedia Engineering, 2015, vol. 100, no. 1, p. 1232-1241. ISSN: 1877-7058.Detail
FRAJKOROVÁ, F.; MOLERO, E.; MONTERO, P.; CARMEN, M.; JAVIER, A.; FERRARI, B. Biodegradable bi-layered coatings shaped by dipping of Ti films followed by the EPD of gelatin/hydroxyapatite composites. Journal of the European Ceramic Society, 2016, vol. 36, no. 2, p. 343-355. ISSN: 1873-619X.Detail
HASIL, P.; VÍTOVEC, J. Conditional oscillation of half-linear Euler-type dynamic equations on time scales. Electronic Journal of Qualitative Theory of Differential Equations, 2015, vol. 2015, no. 6, p. 1-24. ISSN: 1417-3875.Detail
SEDLÁK, J.; MUZIKANT, D.; VALÁŠEK, P. Výroba optických zrcadel pro vysokofrekvenční antény. Kovárenství, 2014, roč. 2014, č. 50, s. 73-76. ISSN: 1213-9289.Detail
KUNZ, L.; FINTOVÁ, S. Fatigue behaviour of AZ91 magnesium alloy in as-cast and severe plastic deformed conditions. In 11th International Fatigue Congress. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. no. 3, p. 397-402. ISBN: 978-3-03835-008-8. ISSN: 1022-6680.Detail
ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Formation and electrical properties of tantalum nanotube arrays via electrodeposition from ionic liquid. Book of Abstracts, CEITEC Annual Conference 2014. Didot, spol. s.r.o., Trnkova 119, 628 00 Brno: Masaryk University, Brno, 2014. p. 225-225. ISBN: 978-80-210-7159-9.Detail
ŠOBROVÁ, P.; VACULOVIČOVÁ, M.; PEKAŘÍK, V.; HUBÁLEK, J.; ADAM, V.; KIZEK, R. Femtogram electrochemical sensing of prion proteins using quantum dots. International Journal of Electrochemical Science, 2013, vol. 8, no. 12, p. 12466-12475. ISSN: 1452-3981.Detail
INGELI, R.; VAVROVIČ, B.; ČEKON, M.; PAULOVIČOVÁ, L. Thermal bridges minimizing through window jamb in low energy buildings. In International conference proceedings enviBUILD 13. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. no. 1, p. 66-69. ISBN: 978-3-03835-040-8. ISSN: 1022-6680.Detail
SLÁVIK, R.; ČEKON, M. Hygrothermal Loads of Building Components in Bathroom of Dwellings. In enviBUILD 2014. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 269-272. ISBN: 978-3-03835-280-8. ISSN: 1022-6680.Detail
FILKUSOVÁ, M.; FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; ORIŇÁK, A.; NOVÁKOVÁ, Z.; ŠKANTÁROVÁ, L. Effect of multi-walled carbon nanotubes on the thermal stability and surface morphology of LiFePO4 cathode material. NEW CARBON MATERIALS, 2013, vol. 28, no. 1, p. 1-7. ISSN: 1007-8827.Detail
VACULOVIČOVÁ, M.; ŠMERKOVÁ, K.; SEDLÁČEK, J.; VYSLOUŽIL, J.; HUBÁLEK, J.; KIZEK, R.; ADAM, V. Integrated chip electrophoresis and magnetic particle isolation used for detection of hepatitis B virus oligonucleotides. ELECTROPHORESIS, 2013, vol. 34, no. 11, p. 1548-1554. ISSN: 0173-0835.Detail
ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; HORNG, J.; VRBA, K. Electronically Linearly Voltage Controlled Second-Order Harmonic Oscillator With Multiples of pi/4 Phase Shifts. In Proceedings of the 38th International Conference on Telecommunication and Signal Processing. Berlin, Germany: 2014. p. 708-712. ISBN: 978-1-4799-8497-8.Detail
ŠIKULA, O.; MOHELNÍKOVÁ, J.; PLÁŠEK, J. Thermal CFD Analysis of Tubular Light Guides. ENERGIES, 2013, vol. 6, no. 12, p. 6304-6321. ISSN: 1996-1073.Detail
PTÁČEK, P.; BARTONÍČKOVÁ, E.; ŠVEC, J.; OPRAVIL, T.; ŠOUKAL, F.; FRAJKOROVÁ, F. The kinetics and mechanism of thermal decomposition of SrCO3 polymorphs. Ceramics International, 2015, vol. 41, no. 1, p. 115-126. ISSN: 0272-8842.Detail
ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Electrodeposition of Tantalum Coatings from TaF5 in ([BMP]Tf2N) Ionic Liquid and Their XPS Characterization. International Conference EUCHEM 2014 Tallinn. 2014. ISBN: 9789949430734.Detail
KISELA, T.; ČERMÁK, J. Stability properties of two-term fractional differential equations. NONLINEAR DYNAMICS, 2015, vol. 80, no. 4, p. 1673-1684. ISSN: 0924-090X.Detail
VONDÁL, J.; HÁJEK, J.; JEGLA, Z. Počítačové modelování tepelných toků v pecích procesního průmyslu. In Sborník ANSYS 2014 Setkání uživatelů a konference. 1. Dolní Morava, ČR: 2014. s. 1-17. ISBN: 978-80-905040-9-7.Detail
MAJER, Z.; HUTAŘ, P.; FRANK, A.; ŠEVČÍK, M.; ZOUHAR, M.; PINTER, G.; NÁHLÍK, L. Point load effect on the buried polyolefin pipes lifetime. POLYMER ENGINEERING AND SCIENCE, 2016, vol. 56, no. 1, p. 79-86. ISSN: 1548-2634.Detail
MIKULKA, J. Parallelized Calculation of the T2 Relaxation Time in MRI. In 37th International Conference on Telecommunications and Signal Processing (TSP). 2015. p. 725-728. ISBN: 978-80-214-4983-1.Detail
ČERMÁK, J.; KISELA, T. Exact and discretized stability of the Bagley-Torvik equation. JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, 2014, vol. 269, no. 10, p. 53-67. ISSN: 0377-0427.Detail
HÁJEK, J.; JEGLA, Z.; VONDÁL, J. CFD analysis of tube circumference heat flux variation in radiant section of fired heater. In Third International Conference on Computational Methods for Thermal Problems. ThermaComp proceedings. Napoli, Italy: Giannini Editore, 2014. no. 6, p. 237-240. ISBN: 978-88-7431-727-1. ISSN: 2305-5995.Detail
ŠIKULA, O.; MĚRKA, V.; PLÁŠEK, J.; HIRŠ, J. VYUŽITÍ SOLÁRNÍCH ZISKŮ VE VZDUCHOTECHNICE. In VYKUROVANIE 2013 21. medzinárodná konferencia na tému: Energetické, environmentálne a ekonomické aspekty pri prevádzke vykurovacích systémov. Bratislava: Slovenská spoločnosť pre techniku prostredia ZSVTS Bratislava, 2013. s. 277-280. ISBN: 978-80-89216-53-6.Detail
SHARMA, V.; HYNEK, D.; TRNKOVÁ, L.; HEMZAL, D.; MÁRIK, M.; KIZEK, R.; HUBÁLEK, J. Electrochemical determination of adenine using a glassy carbon electrode modified with graphene oxide and polyaniline. MICROCHIMICA ACTA, 2016, vol. 161, no. 457, p. 1-8. ISSN: 0026-3672.Detail
ČEKON, M.; INGELI, R. Spectral emissivity of roof membranes and vapor barriers. In Contemporary Problems in Architecture and Construction. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 21-24. ISBN: 978-3-03835-237-2. ISSN: 1022-6680.Detail
PŘIKRYL, Z. Fast Simulation of Pipeline in ASIP Simulators. In 15th International Workshop on Microprocessor Test and Verification. Austin: IEEE Computer Society, 2014. p. 1-6. ISBN: 978-0-7695-4000-9.Detail
LÍZAL, F.; ELCNER, J.; JEDELSKÝ, J.; JÍCHA, M. Investigation of Flow in a Model of Human Airways using Constant Temperature Anemometry and Numerical Simulation. In Recent Advances in Fluid Mechanics and Heat & Mass Transfer. Vouliagmeni, Athens, Greece: WSEAS Press, 2013. p. 35-40. ISBN: 978-1-61804-183-8.Detail
SEDLÁK, J.; CHLADIL, J.; SLANÝ, M.; KOUŘIL, K. Introduction to Processing of CT Clinical Metadata of Disabled Part of Patient Knee Joint. Manufacturing Technology, 2014, vol. 14, no. 4, p. 611-618. ISSN: 1213-2489.Detail
ŠOMPLÁK, R.; TOUŠ, M.; PAVLAS, M.; GREGOR, J.; POPELA, P.; RYCHTÁŘ, A. Multi-Commodity Network Flow Model Applied to Waste Processing Cost Analysis for Producers, Chemical Engineering Transactions. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milano, Itálie: AIDIC Serviyi Srl, 2015. p. 733-738. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.Detail
ŠIKULA, O.; PLÁŠEK, J.; HIRŠ, J. The Effect of Shielding Barriers on Solar Air Collector Gains. In TerraGreen 13 International Conference 2013 - Advancements in Renewable Energy and Clean Environment. Proceedings of a meeting held 15-17 February 2013, Beirut, Lebanon. Energy Procedia. Amsterdam: Elsevier, 2013. no. 5, p. 1070-1075. ISBN: 9781629935706. ISSN: 1876-6102.Detail
CHOVANCOVÁ, M.; ELCNER, J. The pressure gradient in the human respiratory tract. In EPJ Web of Conferences. EPJ Web of Conferences. EDP Sciences, 2014. no. 1, p. 1-6. ISBN: 978-80-260-5375-0. ISSN: 2100-014X.Detail
HÁJEK, J.; JEGLA, Z.; VONDÁL, J. Numerical Analysis of Radiant Section of Fired Heater Focused on the Effect of Wall-Tube Distance. In 24th European Symposium on Computer Aided Process Engineering (ESCAPE). Computer Aided Chemical Engineering. Netherlands: Elsevier, 2014. no. 6, p. 331-336. ISBN: 978-963-9970-48-9. ISSN: 1570-7946.Detail
ZIMMERMANN, T.; STRAUSS, A.; LEHKÝ, D.; NOVÁK, D.; KERŠNER, Z. Stochastic fracture-mechanical characteristics of concrete based on experiments and inverse analysis. Construction and Building Materials, 2014, vol. 2014, no. 73, p. 535-543. ISSN: 0950-0618.Detail
POLZER, S.; BURŠA, J.; GASSER, T.; STAFFA, R.; VLACHOVSKÝ, R. A numerical implementation to predict residual strains from the homogeneous stress hypothesis with application to abdominal aortic aneurysms. ANNALS OF BIOMEDICAL ENGINEERING, 2013, vol. 41, no. 7, p. 1516-1527. ISSN: 0090-6964.Detail
MENŠÍK, P.; STARÝ, M.; MARTON, D. Water Management Software for Controlling the Water Supply Function of Many Reservoirs in a Watershed. Water Resources, 2015, vol. 42, no. 1, p. 133-145. ISSN: 0097-8078.Detail
LÍZAL, F.; BĚLKA, M.; ADAM, J.; JEDELSKÝ, J.; JÍCHA, M. A method for in vitro regional aerosol deposition measurement in a model of the human tracheobronchial tree by the positron emission tomography. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2015, vol. 229, no. 10, p. 750-757. ISSN: 0954-4119.Detail
MAJER, Z.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Point load effect determination for different pressure pipe SDR series. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2015. no. 1, p. 373-376. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.Detail
ČEKON, M. Accuracy analysis of longwave sky radiation models in the MZELWE module of the ESP-r program. ENERGY AND BUILDINGS, 2015, vol. 2015, no. 103, p. 147-158. ISSN: 0378-7788.Detail
PETRÁČEK, J.; KWIECIEN, P.; RICHTER, I.; EKSIOGLU ÖZOK, Y. Analysis of plasmonic slot waveguide couplers in linear and nonlinear regimes. Proc. XXII International Workshop on Optical Waveguide Theory and Numerical Modelling OWTNM 2014. 2014. p. 75-75. Detail
TKACHENKO, S.; NEČAS, D.; DATSKEVICH, O.; ČUPERA, J.; SPOTZ, Z.; VRBKA, M.; KULAK, L.; FORET, R. Tribological Performance of Ti-Si-Based in Situ Composites. TRIBOLOGY TRANSACTIONS, 2016, vol. 59, no. 2, p. 340-351. ISSN: 1040-2004.Detail
BUDAY, P.; INGELI, R.; ČEKON, M. Influence of Thermal Break Element Applied in Balcony Slab on Internal Surface Temperature. Advanced Materials Research, 2014, vol. 1057, no. II, p. 79-86. ISSN: 1022-6680.Detail
DOKOUPIL, J.; PAPEŽ, M.; VÁCLAVEK, P. Comparison of Kalman filters formulated as the statistics of the Normal-inverse-Wishart distribution. In 54th IEEE Conference on Decision and Control. 54th IEEE Conference on Decision and Control. Institute of electrical and electronics engineers inc., 2015. p. 5008-5013. ISBN: 978-1-4799-7884-7. ISSN: 0743-1546.Detail
ROY, S.; PROVAZNÍK, I. In-silico characterization of human metallothionein (MT-1E) and its role in prevention and therapy of bladder cancer with dietary agents. In 2014 IEEE 27th International Symposium on Computer-Based Medical Systems. New York: IEEE, 2014. p. 469-470. ISBN: 978-1-4799-4435-4.Detail
YADAV, R.; HAVLICA, J.; PTÁČEK, P.; KUŘITKA, I.; KOŽÁKOVÁ, Z.; PALOU, M.; BARTONÍČKOVÁ, E.; BOHÁČ, M.; FRAJKOROVÁ, F.; MÁSILKO, J.; ZMRZLÝ, M.; HAJDÚCHOVÁ, M.; ENEV, V. Structural and Magnetic Properties of CoFe2O4 Nanoparticles Synthesized by Starch-Assisted Sol-Gel Auto-Combustion Method in Air, Argon, Nitrogen and Vacuum Atmospheres. Journal of Superconductivity and Novel Magnetism, 2014, vol. 2015, no. 28, p. 249-258. ISSN: 1557-1947.Detail
FINTOVÁ, S.; KUNZ, L. Initiation of fatigue cracks in AZ91 Mg alloy processed by ECAP. In NANOMATERIALS BY SEVERE PLASTIC DEFORMATION. INTERNATIONAL CONFERENCE. 6TH 2014. (NanoSPD6) (2 PARTS). IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2014. no. 8, p. 1-8. ISBN: 978-1-63439-874-9. ISSN: 1757-8981.Detail
Taposh Roy, Dipankar Choudhury, Subir Ghosh, Azuddin Bin Mamat, Belinda Pingguan-Murphy. Improved friction and wear performance of microdimpled ceramic-on-ceramic interface for hip joint arthroplasty ceramic-on-ceramicinterfaceforhipjointarthroplasty. Ceramics International, 2014, vol. 41, no. 1, p. 681-690. ISSN: 0272-8842.Detail
TOUŠ, M.; PAVLAS, M.; PUTNA, O.; STEHLÍK, P.; CRHA, L. Combined heat and power production planning in a waste-to-energy plant on a short-term basis. Energy, 2015, no. 90, p. 137-147. ISSN: 0360-5442.Detail
MARTON, D.; STARÝ, M.; MENŠÍK, P. Water management solution of reservoir storage function under Water management solution of reservoir storage function under condition of measurement uncertainties in hydrological input data. In 12TH INTERNATIONAL CONFERENCE ON COMPUTING AND CONTROL FOR THE WATER INDUSTRY, CCWI2013. Procedia Engineering. Procedia Engineering. Amsterdam: Elsevier Science Publishers, 2014. no. 4, p. 1094-1101. ISSN: 1877-7058.Detail
BRUMMER, V.; JECHA, D.; LEŠTINSKÝ, P.; SKRYJA, P.; HUDÁK, I. Pilot plant long-term test of particulate matter (PM) removal from air stream emerging from granulated fertilizers production (stationary source). In Air Pollution XXIII. Southampton, UK: WIT Press, 2015. p. 419-430. ISBN: 978-1-84564-964-7.Detail
DOKOUPIL, J.; VÁCLAVEK, P. A multi-mode cantilever singular point detection using adaptive hypothesis testing. Journal of Physics: Conference Series, 2015, vol. 633, no. 1, p. 1-4. ISSN: 1742-6588.Detail
MARTON, D. Vodohospodářské řešení zásobního objemu nádrže v podmínkách nejistotou měření ovlivněných hydrologických dat. In Zborník súťažných prác mladých odborníkouv. Bratislava: Slovenský hydrometeorologický ústav, 2012. s. 1-10. ISBN: 978-80-88907-81-7.Detail
GIRGLE, F.; HORÁK, D.; KOSTIHA, V.; PROKEŠ, J.; ŠTĚPÁNEK, P. Moderní kompozitní materiály jako náhrada klasické výztuže do betonu. Materiály pro stavbu, 2015, roč. 20, č. 2, s. 30-33. ISSN: 1213-0311.Detail
BOHÁČ, M.; PALOU, M.; NOVOTNÝ, R.; FRAJKOROVÁ, F. Vliv teploty na hydrataci ternárního systému: cement-metakaolin-struska. In 36. Mezinárodní slovenský a český kalorimetrický semináž. 1. Universita Pardubice: 2014. s. 89-92. ISBN: 978-80-7395-784-1.Detail
MENŠÍK, P.; MARTON, D.; STARÝ, M. Using Predictive Model for Strategic Control of Multi-reservoir System Storage Capacity. In SGEM Conference Proceedings. International multidisciplinary geoconference SGEM. Hydrology and Water Resources. 51 Alexander Malinov Blvd., 1712, Sofia, Bulgaria: STEF92 Technology Ltd., 2015. no. 1, p. 729-736. ISBN: 978-619-7105-36-0. ISSN: 1314-2704.Detail
REBENDA, J.; ŠMARDA, Z. Stability and asymptotic properties of a system of functional differential equations with nonconstant delays. APPLIED MATHEMATICS AND COMPUTATION, 2013, vol. 219, no. 12, p. 6622-6632. ISSN: 0096-3003.Detail
PARTIKA, R.; ORAVEC, P. Problematika napojování stěn na šikmou střechu s tepelnou izolací nad krokvemi. Zborník z konferencie s medzinárodnou účasťou PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV. Košice: 2014. s. 62-65. ISBN: 978-80-553-1678-9.Detail
ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Electrical/dielectric properties of tantalum nanotube arrays via porous-alumina-assisted electrodeposition from ionic liquid. E-MRS Spring Meeting, Lille, France: 2015.Detail
EKSIOGLU, Y.; PETRÁČEK, J. Self-pulsing and chaos in coupled ring resonators with non-instantaneous Kerr-nonlinear response. Proc. CEITEC Annual Conference "Frontiers in material and Life Science". Brno: 2014. p. 118-118. ISBN: 978-80-210-7159-9.Detail
MENŠÍK, P.; MARTON, D. Software pro automatizované řešení zásobní funkce vodohospodářské soustavy. In Zborník príspevkov z 13. konferencia mladých vodohospodárov. Bratislava: Slovenský hydrometeorologický ústav, 2014. s. 1-9. ISBN: 978-80-88907-87-9.Detail
KISELA, T. Power functions and essentials of fractional calculus on isolated time scales. Advances in Difference Equations, 2013, vol. 2013, no. 8, p. 1-18. ISSN: 1687-1847.Detail
KLOC, P.; AUBRECHT, V.; BARTLOVÁ, M. Scaling of the Net Emission Coefficients. In Contributed Papers & Abstracts of Invited Lectures,Topical Invited Lectures, Progress Reports and Workshop Lectures. Belgrade: Institute of Physics, 2014. p. 375-379. ISBN: 978-86-7762-600-6.Detail
FRÝBA, L.; BÉBAR, L.; TOUŠ, M. Evaluation of Sewage Sludge Co-incineration in the Existing Heating Plant or Power Plant from Emission Production Point of View. Chemical Engineering Transactions, 2013, vol. 2013, no. 35, p. 823-828. ISSN: 1974-9791.Detail
ČEKON, M.; KALOUSEK, M.; HRAŠKA, J.; INGELI, R. Spectral optical properties and thermodynamic performance of reflective coatings in a mild climate zone. ENERGY AND BUILDINGS, 2014, vol. 77, no. C, p. 343-354. ISSN: 0378-7788.Detail
ROY, S.; KUMAR, A.; BAIG, M.; MASAŘÍK, M.; PROVAZNÍK, I. Virtual screening, ADMET profiling, molecular docking and dynamics approaches to search for potent selective natural molecules based inhibitors against metallothionein-III to study Alzheimer disease. METHODS, 2015, vol. 25, no. 4, p. 1-26. ISSN: 1046-2023.Detail
DIBLÍK, J.; REBENDA, J.; ŠMARDA, Z. Singular Initial Value Problem for Certain Classes of Systems of Ordinary Differential Equations. Abstract and Applied Analysis, 2013, vol. 2013, no. 1, p. 1-12. ISSN: 1085-3375.Detail
JEGLA, Z.; VONDÁL, J.; HÁJEK, J. Standards for fired heater design: An assessment based on computational modelling. APPLIED THERMAL ENGINEERING, 2015, vol. 89, no. 1, p. 1068-1078. ISSN: 1359-4311.Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V. et al. Long-Term Improvement in Surface Water Quality after Land Consolidation in a Drinking Water Reservoir Catchment. Soil and Water Research, 2015, vol. 10, no. 1, p. 49-55. ISSN: 1801-5395.Detail
PETRÁČEK, J.; EKSIOGLU ÖZOK, Y.; STERKHOVA, A. Simulation of self-pulsing in Kerr-nonlinear coupled ring resonators. OPTICS COMMUNICATIONS, 2014, vol. 318, no. 5, p. 147-151. ISSN: 0030-4018.Detail
ŠOTNER, R.; HRUBOŠ, Z.; HERENCSÁR, N.; JEŘÁBEK, J.; DOSTÁL, T.; VRBA, K. Precise Electronically Adjustable Oscillator Suitable for Quadrature Signal Generation Employing Active Elements with Current and Voltage Gain Control. CIRCUITS SYSTEMS AND SIGNAL PROCESSING, 2014, vol. 33, no. 1, p. 1-35. ISSN: 0278-081X.Detail
VONDÁL, J.; JEGLA, Z.; HÁJEK, J. Fired heaters: validation of design parameters based on numerical modelling. In 10th European Conference on Industrial Furnaces and Boilers. Rio Tinto, Portugal: CENERTEC, 2015. p. 1-12. ISBN: 978-972-99309-7-3.Detail
Antonio Guerrero, Martin Pfannmöller, Alexander Kovalenko, Teresa S. Ripolles, Hamed Heidari, Sara Bals, Louis-Dominique Kaufmann, Juan Bisquert, Germà Garcia-Belmonte. Nanoscale mapping by electron energy-loss spectroscopy reveals evolution of organic solar cell contact selectivity. ORGANIC ELECTRONICS, 2014, vol. 2015, no. 16, p. 227-233. ISSN: 1566-1199.Detail
YADAV, R.; HAVLICA, J.; KUŘITKA, I.; KOŽÁKOVÁ, Z.; PALOU, M.; BARTONÍČKOVÁ, E.; BOHÁČ, M.; FRAJKOROVÁ, F.; MÁSILKO, J.; HAJDÚCHOVÁ, M.; ENEV, V.; WASSERBAUER, J. Magnetic Properties of ZnFe2O4 Nanoparticles Synthesized by Starch-Assisted Sol-Gel Auto-combustion Method. Journal of Superconductivity and Novel Magnetism, 2014, vol. 2015, no. 28, p. 1417-1423. ISSN: 1557-1947.Detail
SPOTZ, Z.; ČELKO, L.; ŠVEJCAR, J. Analysis of NiCrAl powder doped by Fe and Si after high temperature exposure. KOVOVE MATERIALY-METALLIC MATERIALS, 2015, vol. 53, no. 6, p. 459-462. ISSN: 0023-432X.Detail
INGELI, R.; VAVROVIČ, B.; ČEKON, M. Thermal bridges minimizing through typical details in low energy designing. In International conference proceedings enviBUILD 13. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. no. 1, p. 62-65. ISBN: 978-3-03835-040-8. ISSN: 1022-6680.Detail
ŠÍMA, J.; ŠIKULA, O.; KOŠÚTOVÁ, K.; PLÁŠEK, J. Theoretical evaluation of night sky cooling in the Czech Republic. In 2nd International Conference on Solar Heating and Cooling for Buildings and Industry (SHC 2013). Proceedings of a meeting held 23-25 September 2013, Freiburg, Germany. Energy Procedia. Amsterdam: Elsevier, 2014. no. 5, p. 645-653. ISBN: 9781632663665. ISSN: 1876-6102.Detail
ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; DOSTÁL, T.; VRBA, K. Design of Z-copy controlled-gain voltage differencing current conveyor based adjustable functional generator. MICROELECTRONICS JOURNAL, 2015, vol. 46, no. 2, p. 143-152. ISSN: 0026-2692.Detail
FRAJKOROVÁ, F.; BODIŠOVÁ, K.; BOHÁČ, M.; BARTONÍČKOVÁ, E.; SEDLÁČEK, J. Preparation and characterisation of porous composite biomaterials based on silicon nitride and bioglass. Ceramics International, 2015, vol. 41, no. 8, p. 9770-9778. ISSN: 0272-8842.Detail
ORAVEC, P. Analysis of a family house on the basis of wood after 35 years of use. In International Multidisciplinary Scientific Geoconferences. 2014. p. 417-422. ISBN: 978-619-7105-12-4.Detail
ZACHARIÁŠOVÁ, M.; PŘIKRYL, Z.; HRUŠKA, T.; KOTÁSEK, Z. Automated Functional Verification of Application Specific Instruction-set Processors. IFIP Advances in Information and Communication Technology, 2013, vol. 4, no. 403, p. 128-138. ISSN: 1868-4238.Detail
ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Electrical properties of tantalum nanotube arrays prepared by electrodeposition from ionic liquid. Nanocon 2014, Conference Proceedings. Ostrava: TANGER Ltd., Ostrava, 2014. p. 106-106. ISBN: 978-80-87294-55-0.Detail
SEDLÁK, J.; ŘÍČAN, D.; PÍŠKA, M. Study of Materials Produced by Powder Metallurgy Using Classical and Modern Additive Laser Technology. In DAAAM International. 1. Vienna: DAAAM International Symposium, 2014. p. 1-10. ISBN: 978-3-901509-99-5.Detail
TOUŠ, M.; MÁŠA, V.; PAVLAS, M.; AVRAMOV, V. Improving the enegy management of a building complex through utility system modelling. In 24th European Symposium on Computer Aided Process Engineering (ESCAPE). Computer Aided Chemical Engineering. Netherlands: Elsevier, 2014. no. 1, p. 445-450. ISBN: 978-0-444-63443-6. ISSN: 1570-7946.Detail
PLASCENCIA, A.; CALTENCO, H.; BERAN, V. Comparison of Different Powered-wheelchair Control Modes for Individuals with Severe Motor Impairments. In ICINCO 2014 - Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics. Vienna: IEEE Computer Society, 2014. p. 353-359. ISBN: 978-989-758-040-6.Detail
TOUŠ, M.; FRÝBA, L.; PAVLAS, M. Improving Calculation of Lower Heating Value of Waste by Data Reconciliation – Analysis and Evaluation. Chemical Engineering Transactions, 2013, vol. 2013, no. 35, p. 877-882. ISSN: 1974-9791.Detail
DRONGOVÁ, K.; SOBOTKOVÁ, V. Projevy vodní eroze v drahách soustředěného povrchového odtoku. Littera Scripta, 2013, roč. 6, č. 2, s. 183-193. ISSN: 1805-9112.Detail
WINKLER, J.; KUBEČKOVÁ, D.; ZDRAŽILOVÁ, N.; ORAVEC, P. Influence of Electrical Power Lines on Acoustic Properties of Partition Constructions. In 6th International Conference on Contemporary Problems of Architecture and Construction. 2014. s. xx (xx s.)ISBN: 978-80-248-3147-3.Detail
MENŠÍK, P.; STARÝ, M.; MARTON, D. Automatizace řešení zásobní funkce vodohospodářské soustavy. Vodohospodářské technicko-ekonomické informace, 2015, roč. 57, č. 1, s. 2-5. ISSN: 0322-8916.Detail
Alexander Kovalenko, Petr Ashcheulov, Antonio Guerrero, Patricie Heinrichová, Ladislav Fekete, Martin Vala, Martin Weiter, Irena Kratochvílová, and Germà Garcia Belmonte. Diamond-based electrodes for organic photovoltaic devices. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2015, vol. 2015, no. 134, p. 73-79. ISSN: 0927-0248.Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V. The methods for field assessment of rill and ephemeral gully erosion in Czech Republic. Biogeochemical Processes at Air-Soil-Water Interfaces and Environmental Protection. Italy: 2014. p. 68-68. Detail
IFKA, T.; PALOU, M.; KULIFFAYOVÁ, M.; BOHÁČ, M.; FRAJKOROVÁ, F.; BÁGEĽ, Ľ. Pore structure analysis of Portland cement and blended Portland cements cured under hydrothermal conditions cements cured under hydrothermal conditions. In Ecology and New Building Materials and Products. Advanced Materials Research. 2014. no. 1000, p. 235-238. ISSN: 1022-6680.Detail
ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Tantalum nanotube arrays via porous-alumina-assisted electrodeposition from ionic liquid: Electrical characterization. Hammamet, Tunisia: 2015. p. 19-19. Detail
POLZER, S.; GASSER, T.; FORSELL, C.; DRUCKMÜLLEROVÁ, H.; TICHÝ, M.; STAFFA, R.; VLACHOVSKÝ, R.; BURŠA, J. Automatic Identification and Validation of Planar Collagen Organization in the Aorta Wall with Application to Abdominal Aortic Aneurysm. MICROSCOPY AND MICROANALYSIS, 2013, vol. 19, no. 6, p. 1395-1404. ISSN: 1431-9276.Detail
HRUBÁ, B.; ORAVEC, P.; VLČEK, P. Vzduchotěsnost obvodového pláště pasivního domu. Zborník z konferencie s medzinárodnou účasťou PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV. Košice: 2014. s. 234-239. ISBN: 978-80-553-1678-9.Detail
FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; SEDLAŘÍKOVÁ, M.; GÓMEZ-ROMERO, P. Lítium-síra-LiFePO4 nanokompozitný katódový materiál pre Li/S batérie. ChemZi. 2013. č. 1, s. 75-75. ISSN: 1336-7242.Detail
MÁRIK, M.; HUBÁLEK, J.; ŠIMŮNKOVÁ, H.; MOZALEV, A. Electrochemical preparation and characterization of tantalum layers. Ceitec PHD Retreat. 1. Brno: MUNI PRESS, 2015. p. 102-102. ISBN: 978-80-210-7825-3.Detail
ČEKON, M.; ROVNANÍK, P.; INGELI, R. Optical advances in the field of selected solar technologies for exploitation in building energy efficiency. The Asian Conference on Sustainability, Energy and the Environment, 2016, vol. 2015, no. 1, p. 723-735. ISSN: 2186-2311.Detail
MAJER, Z.; PLETZ, M.; KRAUTGASSER, C.; NÁHLÍK, L.; HUTAŘ, P.; BERMEJO, R. Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites. Procedia Materials Science, 2014, vol. 3, no. 1, p. 2071-2076. ISSN: 2211-8128.Detail
DOBAI, R.; GLETTE, K.; TORRESEN, J.; SEKANINA, L. Evolutionary Digital Circuit Design with Fast Candidate Solution Establishment in Field Programmable Gate Arrays. In 2014 IEEE International Conference on Evolvable Systems Proceedings. Piscataway: Institute of Electrical and Electronics Engineers, 2014. p. 85-92. ISBN: 978-1-4799-4480-4.Detail
BOHÁČ, M.; NOVOTNÝ, R.; MÁSILKO, J.; OPRAVIL, T.; ŠOUKAL, F.; YADAV, R.; PALOU, M. Hydration of Synthetized Clinker Phases C3S and C3A with Metakaolin in Isothermal Conditions. Advanced Materials Research (online), 2015, vol. 2015, no. 1124, p. 23-30. ISSN: 1662-8985.Detail
FINTOVÁ, S.; KUNZ, L. Fatigue properties of magnesium alloy AZ91 processed by severe plastic deformation. Journal of the Mechanical Behavior of Biomedical Materials, 2015, vol. 42, no. 1, p. 219-228. ISSN: 1751-6161.Detail
MARTON, D.; MENŠÍK, P.; STARÝ, M. Using Predictive Model for Strategic Control of Multi-reservoir System Storage Capacity. Procedia Engineering, 2015, vol. 2015, no. 119, p. 994-1002. ISSN: 1877-7058.Detail
SEDLÁK, J.; CHLADIL, J.; NOVÁK, L. Návrh technologie výroby zadané součásti v podmínkách dílny ÚST FSI VUT v Brně. Strojírenská technologie, 2013, roč. XVIII, č. 2, s. 97-105. ISSN: 1211-4162.Detail
VONDÁL, J.; VAN DER STEEN, M.; TUMMERS, M. Tracking of Impiging Jet Flame. In ENGINEERING MECHANICS 2014. Engineering Mechanics. 2014. p. 692-695. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.Detail
RICHTER, I.; KWIECIEN, P.; FIALA, J.; PETRÁČEK, J.; EKSIOGLU ÖZOK, Y.; KUZMIAK, V.; ČTYROKÝ, J. Physics and advanced simulations of photonic and plasmonic structures. In Proc. 16th Int. Conference on Transparent Optical Networks ICTON 2014. International Conference on Transparent Optical Networks. 2014. p. Tu.D5.3-1 (Tu.D5.3-9 p.)ISBN: 978-1-4799-5601-2. ISSN: 2162-7339.Detail
MIKULKA, J. GPU-Accelerated Reconstruction of T2 Maps in Magnetic Resonance Imaging. Measurement Science Review, 2015, vol. 2015, no. 4, p. 210-218. ISSN: 1335-8871.Detail
ELIÁŠ, M.; KLOC, P.; JAŠEK, O.; MAZÁNKOVÁ, V.; TRUNEC, D.; HRDÝ, R.; ZAJÍČKOVÁ, L. Atmospheric pressure barrier discharge at high temperature: Diagnostics and carbon nanotubes deposition. JOURNAL OF APPLIED PHYSICS, 2015, vol. 117, no. 10, p. 103301-1 (103301-10 p.)ISSN: 0021-8979.Detail
DUMBROVSKÝ, M.; SOBOTKOVÁ, V.; ŠARAPATKA, B.; CHLUBNA, L.; VÁCHALOVÁ, R. Cost-effectiveness evaluation of model design variants of broad-base terrace in soil erosion control. ECOLOGICAL ENGINEERING, 2014, vol. 68, no. 2014, p. 260-269. ISSN: 0925-8574.Detail
MAJER, Z.; NÁHLÍK, L. Micro-Crack Propagation in Particulate Composite with Different Types of Matrix. Applied Mechanics and Materials, 2012, vol. 245, no. 1, p. 138-143. ISSN: 1660-9336.Detail
BOHÁČ, M.; OPRAVIL, T.; BARTONÍČKOVÁ, E.; FRAJKOROVÁ, F.; PALOU, M. The role of metakaolin fineness on rheological properties of cement pastes. In Ecology and New Building Materials and Products. Advanced Materials Research. 2014. no. 1000, p. 39-42. ISSN: 1022-6680.Detail
ELCNER, J.; LÍZAL, F.; JEDELSKÝ, J.; JÍCHA, M.; CHOVANCOVÁ, M. Numerical investigation of inspiratory airflow in a realistic model of the human tracheobronchial airways and a comparison with experimental results. Biomechanics and Modeling in Mechanobiology, 2016, vol. 15, no. 2, p. 447-469. ISSN: 1617-7959.Detail
Choudhury, D.; Morita, T.; Sawae, Y. ; Lackner, JM. ; Towler, M. ; Krupka, I. A novel functional layered diamond like carbon coating for orthopedics applications. DIAMOND AND RELATED MATERIALS, 2016, vol. 61, no. 1, p. 56-69. ISSN: 0925-9635.Detail
VONDÁL, J.; HÁJEK, J. Wall heat transfer in gas-fired furnaces: Effect of radiation modelling. Applied andComputational Mechanics, 2015, vol. 9, no. 1, p. 67-78. ISSN: 1802-680X.Detail
VONDÁL, J.; HÁJEK, J.; DOHNAL, M. Numerical study of stirred tank with multiphase system. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 1051-1056. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.Detail
HÁJEK, J.; DOHNAL, M.; VONDÁL, J.; BROUKAL, J. Analysis of effervescent spray quality for oil-fired furnace application. Clean Technologies and Environmental Policy, 2015, vol. 17, no. 5, p. 1195-1205. ISSN: 1618-954X.Detail
STANISAVLJEVIC, M.; VACULOVIČOVÁ, M.; KIZEK, R.; ADAM, V. Capillary electrophoresis of quantum dots: Minireview. ELECTROPHORESIS, 2014, vol. 35, no. 14, p. 1929-1937. ISSN: 0173-0835.Detail
LEŠTINSKÝ, P.; JECHA, D.; BRUMMER, V.; BÉBAR, L.; STEHLÍK, P. Removal of SO2 from flue gases using a new design of a Venturi scrubber. 2014.Detail
SLÁVIK, R.; ČEKON, M.; KALOUSEK, M. Numerická analýza priebehu teplôt horného plášťa vetraných dvojplášťových strešných konštrukcií s vplyvom sálania oblohy. In ZBORNÍK z konferencie s medzinárodnou účasťou PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV. 1. Podbanské - Vysoké tatry, SR: Technická univerzita v Kośiciach, Stavebná fakulta, 2013. s. 124-132. ISBN: 978-80-553-1393-1.Detail
ŠIMŠÍKOVÁ, M.; BARTOŠ, M.; ČECHAL, J.; ŠIKOLA, T. Decolorization of organic dyes by gold nanoflowers prepared on reduced graphene oxide by tea polyphenols. Catalysis Science & Technology, 2016, vol. 6, no. 9, p. 3008-3017. ISSN: 2044-4753.Detail
ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N. Voltage Differencing Buffered/Inverted Amplifiers and Their Applications for Signal Generation. Radioengineering, 2013, vol. 22, no. 2, p. 490-504. ISSN: 1210-2512.Detail
KŘÍŽKOVÁ, S.; NGUYEN, H.; STANISAVLJEVIC, M.; KOPEL, P.; VACULOVIČOVÁ, M.; ADAM, V.; KIZEK, R. Microchip Capillary Electrophoresis: Quantum Dots and Paramagnetic Particles for Bacteria Immunoseparation. In Microchip Capillary Electrophoresis Protocols. Springer Science+Business Media New York 2015, 2015. p. 67-79. ISBN: 978-1-4939-2353-3.Detail
ŠKRIPKOVÁ, L. Capillary transfer coefficient in diffusion equation derived from a known solution. In ICNAAM 2014 - AIP Conference Proceedings 1648. Melville: American Institute of Physics, 2015. p. 410015-1 (410015-4 p.)ISBN: 978-0-7354-1287-3.Detail
VACULOVIČOVÁ, M.; ŠMERKOVÁ, K.; PEKÁRKOVÁ, J.; HUBÁLEK, J.; ADAM, V.; KIZEK, R. Glutathione modified CdTe quantum dots as a label for studying DNA interactions with platinum based cytostatics. ELECTROPHORESIS, 2013, vol. 34, no. 6, p. 801-808. ISSN: 0173-0835.Detail
MACKŮ, R.; ŠICNER, J.; KOKTAVÝ, P.; TRČKA, T. Fracture related electromagnetic emission measurement and excess noise analysis of reinforced composites. Procedia Materials Science, 2014, vol. 2014, no. 3, p. 116-121. ISSN: 2211-8128.Detail
SEDLÁK, J. Aplikace aditivní technologie pro výrobu prototypových modelů totální endoprotézy kolenního kloubu. In Sborník příspěvků Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU. Ostrava, 2014, 1. vydání: VŠB - TU Ostrava, Fakulta strojní, 2014. s. 1-10. ISBN: 978-80-248-3518-1.Detail
JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P. Snižování polutantu VOC na multifunkční jednotce. In Sborník přednášek - VOC 2015 - Emise organických látek z technologických procesů a metody jejich snižování. Český svaz vědeckotechnických společností. Pardubice: Český svaz vědeckotechnických společností, 2015. s. 49-53. ISBN: 978-80-02-02597-9.Detail
GABOR, G.; RUSZKOWSKI, S.; VÍTOVEC, J. Ważewski type theorem for non-autonomous systems of equations with a disconnected set of egress points. APPLIED MATHEMATICS AND COMPUTATION, 2015, vol. 265, no. 6, p. 358-369. ISSN: 0096-3003.Detail
REBENDA, J.; ŠMARDA, Z. Comparison of differential transformation method with Adomian decomposition method for functional differential equations with proportional delays. In 11th International Conference on Numerical Analysis and Applied Mathematics: ICNAAM 2013. AIP conference proceedings. 2013. no. 1558, p. 1190-1193. ISBN: 978-0-7354-1184-5. ISSN: 0094-243X.Detail
CHOUDHURY, D.; ROY, T.; KRUPKA, I.; HARTL, M.; MOOTANAH, R. Tribological Investigation of Ultra-High Weight Molecular Polyethylene Against Advanced Ceramic Surfaces in a hip Joint Conditions. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, vol. 229, no. 4, p. 410-419. ISSN: 1350-6501.Detail
DOKOUPIL, J.; PAPEŽ, M.; VÁCLAVEK, P. Bayesian comparison of Kalman filters with known covariance matrices. In AIP conference proceedings. AIP conference proceedings. 2015. p. 1-4. ISBN: 978-0-7354-1287-3. ISSN: 0094-243X.Detail
STRAKOVÁ FEDORKOVÁ, A.; ČECH, O.; KAZDA, T.; ORIŇÁKOVÁ, R.; SEDLAŘÍKOVÁ, M. High performance sulfur nanocomposites as cathode materials based on conversion reaction. In XIV. Pracovní setkání fyzikálních chemikú a elektrochemikú. 2014. p. 36-39. ISBN: 978-80-210-6842-1.Detail
ŠIMŮNKOVÁ, H.; LEDNICKÝ, T.; WHITEHEAD, A.; KALINA, L.; ŠIMŮNEK, P.; HUBÁLEK, J. Tantalum-based nanotube arrays via porous-alumina-assisted electrodeposition from ionic liquid: Formation and electrical characterization. APPLIED SURFACE SCIENCE, 2021, vol. 548, no. 149264, p. 149264-149274. ISSN: 0169-4332.Detail
ŠIMŠÍKOVÁ, M.; ANTALÍK, M.; KAŇUCHOVÁ, M.; ŠKVARLA, J. Cytochrome c conjugated to ZnO–MAA nanoparticles: The study of interaction and influence on protein structure. International Journal of Biological Macromolecules, 2013, vol. 59, no. 1, p. 235-241. ISSN: 0141-8130.Detail
ŠIMŠÍKOVÁ, M.; ANTALÍK, M.; KAŇUCHOVÁ, M.; ŠKVARLA, J. Anionic 11-mercaptoundecanoic acid capped ZnO nanoparticles. APPLIED SURFACE SCIENCE, 2013, vol. 282, no. 1, p. 342-347. ISSN: 0169-4332.Detail
SOBOTKOVÁ, V.; DUMBROVSKÝ, M. The new volumetric approach for field measurements of rill erosion. Abstract Book - 9th International Soil Science Congress on “The Soul of Soil and Civilization”. Samsun, Turkey: Pazar Mah, 2014. p. 243-243. ISBN: 979‐605‐63090-21.Detail
Choudhury, D.; Lackner, JM. ; Major, L.; Morita, T.; Sawae, Y.; Bin Mamat, A. ; Stavness, I. ; Roy, CK.; Krupka, I. Improved wear resistance of functional diamond like carbon coated Ti-6Al-4V alloys in an edge loading conditions. Journal of the Mechanical Behavior of Biomedical Materials, 2016, vol. 59, no. 1, p. 586-595. ISSN: 1751-6161.Detail
MENŠÍK, P.; STARÝ, M.; MARTON, D. Using Predictive Models of Mean Monthly Flows for Operative Outflows Control from Large Open Reservoirs. In Proceedings ITISE 2014, International work-conference on Time Series. Spain, Granada: Copicentro Granada S.L, 2014. p. 382-395. ISBN: 978-84-15814-97-9.Detail
ČERMÁK, J.; KISELA, T. Introduction to Stability Theory of Linear Fractional Difference Equations. In Fractional Calculus: Theory. Mathematics Research Developments. 2014. p. 117-162. ISBN: 978-1-63463-002-3.Detail
MIKULKA, J.; DVOŘÁK, P. Fast Calculation of T2 Relaxation Time in Magnetic Resonance Imaging. In Proceedings of PIERS 2014 in Guangzhou. Progress In Electromagnetics. Guangzhou, Čína: 2014. p. 2331-2335. ISBN: 978-1-934142-28-8. ISSN: 1559-9450.Detail
ŠIMŮNKOVÁ, H.; KALINA, L.; SEDLÁČEK, J.; BOUŠEK, J.; MOZALEV, A. Electrolytic formation of tantalum nanotube arrays on the metal substrate through the alumina nanopores. Book of Abstracts of the Anodizing Science and Technology International Conference (AST) 2014. Sapporo, Japan: Anodizing Research Society, The Surface Finishing Society of Japan, 2014. p. 102-102. Detail
FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; ČECH, O.; SEDLAŘÍKOVÁ, M. New Composite Cathode Materials for Li/S Batteries: A Review. International Journal of Electrochemical Science, 2013, vol. 8, no. 8, p. 10308-10319. ISSN: 1452-3981.Detail
ČERMÁK, J.; KISELA, T.; HORNÍČEK, J. Stability regions for fractional differential systems with a time delay. Communications in Nonlinear Science and Numerical Simulation, 2016, vol. 31, no. 1-3, p. 108-123. ISSN: 1007-5704.Detail
MIKULKA, J. Matlab Extension for 3DSlicer: A Robust MR Image Processing Tool. In Proceedings of PIERS 2014 in Guangzhou. Progress In Electromagnetics. Guangzhou, Čína: 2014. p. 1857-1860. ISBN: 978-1-934142-28-8. ISSN: 1559-9450.Detail
POSPÍŠILOVÁ ŠKRIPKOVÁ, L.; POSPÍŠIL, M. Representation of solutions of neutral differential equations with delay and with linear parts defined by pairwise permutable matrices. Miskolc Mathematical Notes, 2015, vol. 16, no. 1, p. 423-438. ISSN: 1787-2405.Detail
LÍZAL, F.; JEDELSKÝ, J.; BĚLKA, M.; ZAREMBA, M.; MALÝ, M.; JÍCHA, M. Investigation of the Airflow inside Realistic and Semi-Realistic Replicas of Human Airways. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2015. no. 2015, p. 1-8. ISSN: 2100-014X.Detail
DIBLÍK, J.; VÍTOVEC, J. Asymptotic behavior of solutions of systems of dynamic equations on time scales in a set whose boundary is a combination of strict egress and strict ingress points. APPLIED MATHEMATICS AND COMPUTATION, 2014, vol. 238, no. 6, p. 289-299. ISSN: 0096-3003.Detail
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, J. Determination of the Effect of Interphase on Fracture Toughness and the Stiffness of a Polymer Particulate Composite. MECHANICS OF COMPOSITE MATERIALS, 2013, vol. 49, no. 5, p. 1-12. ISSN: 0191-5665.Detail
ALBHILIL, A.; PALOU, M.; KOZÁNKOVÁ, J.; BOHÁČ, M. Thermal and Microstructure Stability of Cordierite-Mullite Ceramics Prepared from Natural Raw Materials-Part II. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2014, vol. 2015, no. 40, p. 151-161. ISSN: 2191-4281.Detail
ŠOBROVÁ, P.; VACULOVIČOVÁ, M.; HUBÁLEK, J.; ADAM, V.; KIZEK, R. Voltammetry as a Tool for Characterization of CdTe Quantum Dots. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 2013, vol. 14, no. 7, p. 13497-13510. ISSN: 1422-0067.Detail
SEDLÁK, J.; SLANÝ, M.; FIALA, Z.; JAROŠ, A.; BLAŽKOVÁ, V. Testing of Implant Prototype of Femoral Component Using Hydraulic Machine ZD40. Manufacturing Technology, 2015, vol. 2015, no. 3, p. 416-423. ISSN: 1213-2489.Detail
TKACHENKO, S.; NEČAS, D.; DATSKEVICH, O.; ČUPERA, J.; SPOTZ, Z.; VRBKA, M.; KULAK, L.; FORET, R. Tribological behavior of Ti–Si based in situ composites under sliding. In Metal 2014. Ostrava: Tanger Ltd., 2014. p. 2704-2709. ISBN: 978-80-87294-52-9.Detail
MARTON, D.; KAPELAN, Z. Risk and Reliability Analysis of Open Reservoir Water Shortages Using Optimization. In 16th Water Distribution System Analysis Conference, WDSA2014 Urban Water Hydroinformatics and Strategic Planning. Procedia Engineering. Procedia Engineering. Amsterdam: Elsevier, 2014. no. 1, p. 1478-1485. ISSN: 1877-7058.Detail
FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; ORIŇÁK, A.; SEDLAŘÍKOVÁ, M. LiFePO4 cathode material for Li-ion batteries modified with conductive polymer PPy/PEG. 18th Meeting of the Portuguese Electrochemical Society. Porto, Portugalsko: 2013. p. 48-48. ISBN: 978-989-95527-1-5.Detail
MARTON, D.; STARÝ, M.; MENŠÍK, P.; PASEKA, S. Hydrological Reliability Assessment of Water Management Solution of Reservoir Storage Capacity in Conditions of Uncertainty. In Drought: Research and Science-Policy Interfacing. 1. Leiden, Netherlands: CRC Press Taylor & Francis Group, 2015. p. 377-382. ISBN: 978-1-138-02779-4.Detail
BRUMMER, V.; JECHA, D.; SKRYJA, P.; LEŠTINSKÝ, P. Design of multifunctional pilot unit for waste gases pollutants reduction. MCS-8 Eighth mediterranean combustion symposium Book of Abstracts. 2013. p. PFC-1 1 (PFC-1 11 p.)Detail
SEDLÁK, J.; SEKERKA, V.; SLANÝ, M.; KOUŘIL, K.; ZEMČÍK, O.; CHLADIL, J. Production of prototype parts using Direct Metal Laser Sintering technology. In ERIN 2014, 8th International Conference for Young Researchers and Ph.D. Students; Proceedings of Abstracts. Litera Brno: Brno University of Technology, 2014. p. 1-13. ISBN: 978-80-214-4931-2.Detail
MAJER, Z.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. Particulate Composite Damage: Numerical Estimation of Micro-Crack Paths. In Local Mechanical Properties X. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. no. 1, p. 261-264. ISBN: 978-3-03835-062-0. ISSN: 1013-9826.Detail
ŠOTNER, R.; JEŘÁBEK, J.; JAIKLA, W.; HERENCSÁR, N.; VRBA, K.; DOSTÁL, T. Novel Oscillator Based on Voltage and Current-Gain Adjusting Used for Control of Oscillation Frequency and Oscillation Condition. Elektronika Ir Elektrotechnika, 2013, vol. 19, no. 6, p. 75-80. ISSN: 1392-1215.Detail
MAJER, Z.; MARCIÁN, P.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. no. 1, p. 445-448. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.Detail
STANISAVLJEVIC, M.; PEKÁRKOVÁ, J.; DOSTÁLOVÁ, S.; KŘÍŽKOVÁ, S.; VACULOVIČOVÁ, M.; ADAM, V.; KIZEK, R. Interactions between CdTe quantum dots and DNA revealed by capillary electrophoresis with laser-induced fluorescence detection. ELECTROPHORESIS, 2014, vol. 35, no. 18, p. 2587-2592. ISSN: 0173-0835.Detail
BRUMMER, V.; JECHA, D.; MARTINEC, J.; SKRYJA, P.; STEHLÍK, P. Impact of catalytic oxidation operating conditions on VOC and CO conversions on the Pt-Pd/Al2O3 catalyst. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Milan, Italy: Aidic Servizi S.r.l., 2015. 6 p. ISBN: 978-88-95608-36-5.Detail
INGELI, R.; ČEKON, M.; PAULOVIČOVÁ, L. Energy consumption for heating of recovery elementary school. Vienna, Austria: 2014. p. 130-133. Detail
LÍZAL, F.; TUHOVČÁK, J.; JÍCHA, M. Measurement of the airflow velocity upstream and downstream a wire mesh using constant temperature anemometry. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2013. no. 1, p. 1-4. ISBN: 978-80-260-5375-0. ISSN: 2100-014X.Detail
ŠIMŠÍKOVÁ, M.; BARTOŠ, M.; KEŠA, P.; ŠIKOLA, T. Green approach for preparation of reduced graphene oxide decorated with gold nanoparticles and its optical and catalytic properties. MATERIALS CHEMISTRY AND PHYSICS, 2016, vol. 177, no. 1, p. 339-345. ISSN: 0254-0584.Detail
DOBAI, R.; SEKANINA, L. Low-Level Flexible Architecture with Hybrid Reconfiguration for Evolvable Hardware. ACM Transactions on Reconfigurable Technology and Systems, 2015, vol. 8, no. 3, p. 1-24. ISSN: 1936-7406.Detail
SOBOTKOVÁ, V.; DUMBROVSKÝ, M.; SOBOTKA, J. The methods for field assessment of rill erosion in the Czech Republic. In 15th International multidisciplinary scientific geoconference SGEM 2015. Conference Proceedings. Soils. International multidisciplinary geoconference SGEM. Book3. Albena, Bulgaria: 2015. no. Vol. 2, p. 371-378. ISBN: 978-619-7105-37-7. ISSN: 1314-2704.Detail
DOBAI, R.; SEKANINA, L. Towards Evolvable Systems Based on the Xilinx Zynq Platform. 2013 IEEE International Conference on Evolvable Systems (ICES). Proceedings of the 2013 IEEE Symposium Series on Computational Intelligence (SSCI). Singapur: IEEE Computational Intelligence Society, 2013. p. 89-95. ISBN: 978-1-4673-5869-9.Detail
BOHÁČ, M.; NOVOTNÝ, R.; FRAJKOROVÁ, F.; YADAV, R.; OPRAVIL, T.; PALOU, M. Properties of Cement Pastes with different Particle Size Fractions of Metakaolin. World Academy of Science, engeneering and Technology, 2015. p. 538-542. Detail
PETRÁČEK, J.; KWIECIEN, P.; RICHTER, I.; EKSIOGLU ÖZOK, Y. Analysis of plasmonic slot waveguide couplers in linear and nonlinear regimes. Proc. CEITEC Annual Conference "Frontiers in material and Life Science". Masarykova univerzita, 2014. p. 195-195. ISBN: 978-80-210-7159-9.Detail
FEDORKOVÁ, A. PPy/PEG-LiFePO4 Cathode Material for Li-ion Batteries. In Book of abstracts, NFA 2012, Nanomaterials: Fundamentals and Applications. Košice: UPJS, 2012. p. 12-12. ISBN: 978-80-7097-970-9.Detail
CETIN , A. E.; ETEZADI, D.; GALARRETA, B.C.; BUSSON, M.P.; EKSIOGLU ÖZOK, Y.; ALTUG, H. Plasmonic nanohole arrays on a robust hybrid substrate for highly sensitive label-free biosensing. ACS Photonics, 2015, no. 2, p. 1167-1174. ISSN: 2330-4022.Detail
MARTON, D.; STARÝ, M.; MENŠÍK, P. Analysis of the influence of input data uncertainties on determining the reliability of reservoir storage capacity. Journal of Hydrology and Hydromechanics, 2015, vol. 63, no. 4, p. 287-294. ISSN: 0042-790X.Detail
KLOC, P.; AUBRECHT, V.; BARTLOVÁ, M.; COUFAL, O. Radiation transfer in air and air-Cu plasmas for two temperature profiles. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2015, vol. 48, no. 5, p. 1-13. ISSN: 0022-3727.Detail
ORAVEC, P. Windows in buildings - diagnostics of selected properties after time of using. In enviBUILD 2013. Advanced Materials Research (online). Switzerland: Trans Tech Publications, 2014. p. 184-187. ISBN: 978-3-03835-040-8. ISSN: 1662-8985.Detail
MIKULKA, J. Multiparametric Biological Tissue Analysis: A Survey of Image Processing Tools. In Proceedings of PIERS 2014 in Guangzhou. Progress In Electromagnetics. Guangzhou, Čína: 2014. p. 1861-1864. ISBN: 978-1-934142-28-8. ISSN: 1559-9450.Detail
ORAVEC, P. Conversion of a rural building in Beskydy after 90 years of use. In Proceedings of the International Scientifical Conference, enviBUILD – Buildings and Environment 2013. first. Bratislava: STU – Nakladateľstvo STU, 2013. s. 279-282. ISBN: 978-80-227-4070-8.Detail
STANISAVLJEVIC, M.; KŘÍŽKOVÁ, S.; VACULOVIČOVÁ, M.; KIZEK, R.; ADAM, V. Quantum dots-fluorescence resonance energy transfer-based nanosensors and their application. BIOSENSORS & BIOELECTRONICS, 2015, vol. 74, no. 1, p. 562-574. ISSN: 0956-5663.Detail
ROUPEC, J.; KUBÍK, M.; MAZŮREK, I.; STRECKER, Z. Problems of FEM Analysis of Magnetic Circuit. In Mechatronics 2013 - Recent Technological and Scientific Advances. London: Springer, 2013. p. 299-305. ISBN: 978-3-319-02294-9.Detail
SLÁVIK, R.; ČEKON, M.; KALOUSEK, M. Predikcia miery vplyvu tepelno-izolačných vlastností na vývoj teploty horného plášťa. In PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV zborník z konferencie s medzinárodnou účasťou. 1. Košice: Technická univerzita v Košiciach, 2014. s. 129-134. ISBN: 978-80-553-1678-9.Detail
ČEKON, M. Thermodynamic properties of reflective coatings. In International conference proceedings enviBUILD 12. Advanced Materials Research. Switzerland: Trans Tech Publications, 2013. no. 1, p. 179-182. ISBN: 978-3-03785-596-6. ISSN: 1022-6680.Detail
LEŠTINSKÝ, P.; JECHA, D.; BRUMMER, V.; STEHLÍK, P. Wet Flue Gas Desulfurization Using a New O-Element Design Which Replaces the Venturi Scrubber. In International Science Index. World Academy of Science, Engineering and Technology. New York: 2015. no. 17 (6) Part I, p. 130-134. ISSN: 1307-6892.Detail
EKSIOGLU ÖZOK, Y.; PETRÁČEK, J. Dynamical analysis of double-ring resonator with non-instantenous Kerr response and effect of loss. OPTICAL AND QUANTUM ELECTRONICS, 2015, vol. 47, no. 10, p. 3323-3335. ISSN: 0306-8919.Detail
HUSÁR, A.; PŘIKRYL, Z.; DOLÍHAL, L.; MASAŘÍK, K.; HRUŠKA, T. ASIP Design with Automatic C/C++ Compiler Generation. Haifa: 2013. 1 p.Detail
CHOUDHURY, D.; GHOSH, S.; ALI, F.; VRBKA, M.; HARTL, M.; KŘUPKA, I. The influence of surface modification on friction and lubrication mechanism under a bovine serum lubricated condition. TRIBOLOGY TRANSACTIONS, 2016, vol. 59, no. 2, p. 316-322. ISSN: 1040-2004.Detail
ČEKON, M.; KALOUSEK, M.; HRAŠKA, J. Verification of MZELWE module in ESP-r programme with experimental confrontation. In Research and Applications in Structural Engineering, Mechanics and Computation. CRC Press, Taylor&Francis Group. Cape Town, JAR: CRC Press, Balkema, Taylor&Francis Group, 2013. p. 649-650. ISBN: 978-1-138-00061-2.Detail
POLZER, S.; GASSER, T.; NOVÁK, K.; MAN, V.; TICHÝ, M.; SKÁCEL, P.; BURŠA, J. Structure-based constitutive model can accurately predicts planar biaxial properties of arotic wall tissue. Acta Biomaterialia, 2015, vol. 14, no. 1, p. 133-145. ISSN: 1742-7061.Detail
LEŠTINSKÝ, P.; VEČEŘ, M. Effect of the draft tube on mixing in the reactor with internal circulation loop – CFD simulation. In 21st International Congress of Chemical and Process Engineering CHISA 2014 and 17th Conference PRES 2014, Authors of papers. Praha: 2014. p. 1-9. ISBN: 978-80-02-02555-9.Detail
Antonio Guerrero, Hamed Heidari, Teresa S. Ripolles, Alexander Kovalenko, Martin Pfannmöller, Sara Bals, Louis-Dominique Kauffmann, Juan Bisquert, Germà Garcia-Belmonte. Shelf Life Degradation of Bulk Heterojunction Solar Cells: Intrinsic Evolution of Charge Transfer Complex. Advanced energy materials, 2014, vol. 2014, no. 4, p. 1401997-1401997. ISSN: 1614-6840.Detail
EKSIOGLU, Y.; PETRÁČEK, J. Self-Pulsing and Chaos in Kerr-Nonlinear Coupled Ring Resonators. In Proc. 16th Int. Conference on Transparent Optical Networks ICTON 2014. International Conference on Transparent Optical Networks. 2014. p. Mo.D6.5-1 (Mo.D6.5-4 p.)ISBN: 978-1-4799-5601-2. ISSN: 2162-7339.Detail
ŠIKULA, O.; VOJKŮVKOVÁ, P.; ŠÍMA, J.; PLÁŠEK, J.; GEBAUER, G. Hybrid Roof Panels for Night Cooling and Solar Energy Utilization in Buildings. In International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability 2015 (TMREES15). Energy Procedia. Energy Procedia Volume 74. Amsterdam: Elsevier, 2015. no. 74, p. 177-183. ISBN: 9781510812239. ISSN: 1876-6102.Detail
ŠOTNER, R.; JEŘÁBEK, J.; PETRŽELA, J.; HERENCSÁR, N.; PROKOP, R.; VRBA, K. Second-order Simple Multiphase Oscillator Using Z-Copy Controlled-Gain Voltage Differencing Current Conveyor. Elektronika Ir Elektrotechnika, 2014, vol. 20, no. 9, p. 13-18. ISSN: 1392-1215.Detail
MAJER, Z.; NÁHLÍK, L.; MALÍKOVÁ, L. Particulate Composite Damage: The Influence of Particle Shape on Crack Path. Key Engineering Materials (print), 2015, vol. 662, no. 1, p. 77-80. ISSN: 1013-9826.Detail
LÍZAL, F.; JEDELSKÝ, J.; ADAM, J.; BĚLKA, M.; JÍCHA, M. Aerosol Deposition Measurement in the Model of Human Lungs using Positron Emission Tomography. Prague, Czech Republic: European Aerosol Assembly, 2013. p. 1 (1 s.). Detail
JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P.; MARTINEC, J.; STEHLÍK, P. Effective abatement of VOC and CO from acrylic acid and related production waste gas by catalytic oxidation. Clean Technologies and Environmental Policy, 2014, vol. 16, no. 7, p. 1329-1338. ISSN: 1618-954X.Detail
ŠOTNER, R.; LAHIRI, A.; KARTCI, A.; HERENCSÁR, N.; JEŘÁBEK, J.; VRBA, K. Design of Novel Precise Quadrature Oscillators Employing ECCIIs with Electronic Control. Advances in Electrical and Computer Engineering, 2013, vol. 13, no. 2, p. 65-72. ISSN: 1582-7445.Detail
ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; PETRŽELA, J.; VRBA, K.; KINCL, Z. Linearly Tunable Quadrature Oscillator Derived from LC Colpitts Structure Using Voltage Differencing Transconductance Amplifier and Adjustable Current Amplifier. ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 2014, vol. 81, no. 1, p. 121-136. ISSN: 0925-1030.Detail
JECHA, D.; MARTINEC, J.; BRUMMER, V.; STEHLÍK, P.; LEŠTINSKÝ, P. Modernization of Unit for Elimination of VOCs by Catalytic Oxidation. Chemical Engineering Transactions, 2013, vol. 35, no. 2013, p. 745-750. ISSN: 1974-9791.Detail
ORIŇÁKOVÁ, R.; ORIŇÁK, A.; KUPKOVÁ, M.; SABALOVÁ, M.; STRAKOVÁ FEDORKOVÁ, A.; KABÁTOVÁ, M.; KAĽAVSKÝ, F.; SEDLAŘÍKOVÁ, M. Effect of Heat Treatment on the Corrosion and Mechanical Properties of Electrolytical Composite Ni-B Coatings. International Journal of Electrochemical Science, 2014, vol. 9, no. 8, p. 4268-4286. ISSN: 1452-3981.Detail
ORAVEC, P.; FIŠAROVÁ, Z.; VLČEK, P. Diagnostika kročejového zvuku stropních konstrukcí v bytovém domě. Stavební fyzika v pozemním stavitelství: Teorie a praxe. Brno: 2014. s. 75-78. ISBN: 978-80-214-4926-8.Detail
DOHNAL, M.; HÁJEK, J.; VONDÁL, J. Unsteadiness and Spatio-Temporal Statistics in Intermediate Effervescent Spray Region. In CHEMICAL ENGINEERING TRANSACTIONS - VOL.45. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 1027-1032. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.Detail
POLZER, S.; GASSER, T.; BURŠA, J.; STAFFA, R.; VLACHOVSKÝ, J.; MAN, V.; SKÁCEL, P. Importance of material model in wall stress prediction in abdominal aortic aneurysms. MEDICAL ENGINEERING & PHYSICS, 2013, vol. 35, no. 4, p. 1282-1289. ISSN: 1350-4533.Detail
BOHÁČ, M.; STANĚK, T.; URBÁNEK, P. Testing of surface photoactivity of fibre-cement composites. In Ecology and New Building Materials and Products. Advanced Materials Research. 2014. no. 1000, p. 35-38. ISSN: 1022-6680.Detail
SEDLÁK, J.; ZEMČÍK, O.; SLANÝ, M.; CHLADIL, J.; KOUŘIL, K.; SEKERKA, V.; ROZKOŠNÝ, L. Production of Prototype Parts Using Direct Metal Laser Sintering Technology. Acta Polytechnica, 2015, vol. 55, no. 4, p. 260-266. ISSN: 1210-2709.Detail
ROUPEC, J.; MAZŮREK, I.; STRECKER, Z.; KLAPKA, M. The Behavior of the MR Fluid During Durability Test. Journal of Physics: Conference Series, 2012, vol. 412, no. 1, p. 1-8. ISSN: 1742-6588.Detail
PLASCENCIA, A.; KARSTOFT, H. Map Building Based on a Xtion Pro Live RGBD and a Laser Sensors. 2014, vol. 4, no. 1, p. 1-7. ISSN: 2165-7866.Detail
BARTOŠ, M.; HRABOVSKÝ, M. Humidity sensing properties of graphene and graphene oxid. San Francisco: 2015. p. 238-238. Detail
HNILICA, O.; PLÁŠEK, J. BSim Simulation of Indoor Climate of Romanesque Rotunda in Znojmo. In Proceedings of CLIMA 2013. 1st Edition. Praha: Society of Environmental Engineering (STP), 2013. p. 614-623. ISBN: 978-80-260-4001-9.Detail
ORAVEC, P.; HRUBÁ, B.; PEŘINA, Z. The Windows in the Modular Structure - Air Tightness and Quality of Installation Diagnostics. In enviBUILD 2014 - Buildings and Environment, International Conference proceedings. 2014. s. 191-194. ISBN: 978-80-214-5003-5.Detail
ŠIKULA, O.; MOHELNÍKOVÁ, J.; PLÁŠEK, J. Thermal Analysis of Light Pipes for Insulated Flat Roofs. ENERGY AND BUILDINGS, 2014, vol. 2014, no. 85, p. 436-444. ISSN: 0378-7788.Detail
Tantalum nanotube arrays via porous-alumina-assisted electrodeposition from ionic liquid: Electrical characterization. In Tunisia: IOP Publishing Proceeding journals, 2015.Detail
CABADA, A.; KISELA, T. Existence of positive periodic solutions of some nonlinear fractional differential equations. Communications in Nonlinear Science and Numerical Simulation, 2017, vol. 50, no. 1, p. 51-67. ISSN: 1007-5704.Detail
YADAV, R.; HAVLICA, J.; HNATKO, M.; ŠAJGALÍK, P.; CIGÁŇ, A.; PALOU, M.; BARTONÍČKOVÁ, E.; BOHÁČ, M.; FRAJKOROVÁ, F.; MÁSILKO, J.; ZMRZLÝ, M.; KALINA, L.; HAJDÚCHOVÁ, M.; ENEV, V. Magnetic properties of Co1-xZnxFe2O4 spinel ferrite nanoparticles synthesized by starch-assisted sol–gel auto-combustion method and its ball milling. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2014, vol. 2015, no. 378, p. 190-199. ISSN: 0304-8853.Detail
BLAŽKOVÁ, V.; SEDLÁK, J.; JAROŠ, A.; FIALA, Z.; MOURALOVÁ, K.; KOLÁŘ, L. Obrábění pokročilých keramických materiálů. Strojírenská technologie, 2015, roč. 20, č. 1, s. 2-11. ISSN: 1211-4162.Detail
NOVÁKOVÁ, Z.; ORIŇÁKOVÁ, R.; ORIŇÁK, A.; HVIZDOŠ, P.; STRAKOVÁ FEDORKOVÁ, A. Elimination Voltammetry as a New Method for Studying the SAM Formation. International Journal of Electrochemical Science, 2014, vol. 9, no. 7, p. 3846-3863. ISSN: 1452-3981.Detail
DIBLÍK, J.; VÍTOVEC, J. Lower and upper estimates of solutions to systems of delay dynamic equations on time scales. Boundary Value Problems, 2013, vol. 2013, no. 1, p. 1-14. ISSN: 1687-2770.Detail
ŠIMŠÍKOVÁ, M.; ČECHAL, J.; ZORKOVSKÁ, A.; ANTALÍK, M.; ŠIKOLA, T. Preparation of CuO/ZnO nanocomposite and its application as a cysteine / homocysteine colorimetric and fluorescence detector. COLLOIDS AND SURFACES B-BIOINTERFACES, 2014, vol. 123, no. 1, p. 951-958. ISSN: 0927-7765.Detail
JANŮ, L.; STANISAVLJEVIC, M.; KŘÍŽKOVÁ, S.; ŠOBROVÁ, P.; VACULOVIČOVÁ, M.; KIZEK, R.; ADAM, V. Electrophoretic study of peptide-mediated quantum dot-human immunoglobulin bioconjugation. ELECTROPHORESIS, 2013, vol. 34, no. 18, p. 2725-2732. ISSN: 0173-0835.Detail
FIALA, Z.; JAROŠ, A.; SEDLÁK, J.; KOLÁŘ, L.; BLAŽKOVÁ, V. Effect of Spindle Unit Extrusion on Stability of Machining Process. Manufacturing Technology, 2015, vol. 15, no. 3, p. 329-333. ISSN: 1213-2489.Detail
ŠKRIPKOVÁ, L. Capillary transfer coefficient of polynomial type in the diffusion equation. In 11th International Conference of Numerical Analysis and Applied Mathematics 2013, AIP Conference Proceedings 1558. AIP conference proceedings. Melville, New York: American Institute of Physics, 2013. p. 1008-1011. ISBN: 978-0-7354-1184-5. ISSN: 0094-243X.Detail
KOVALENKO, A. GUERERRO, A. GARCIA-BELMONTE, G. Role of vertical segregation in semitransparent organic photovoltaics. ACS Applied Materials & Interfaces, 2014, vol. 2015, no. 7, p. 1234-1239. ISSN: 1944-8244.Detail
SEDLÁK, J.; DRÁBEK, T.; MOURALOVÁ, K.; CHLADIL, J.; KOUŘIL, K. Machining Issues of Titanium Alloys. International Journal of Metalcasting, 2015, vol. 9, no. 2, p. 41-50. ISSN: 1939-5981.Detail
DOBAI, R. Evolutionary On-line Synthesis of Hardware Accelerators for Software Modules in Reconfigurable Embedded Systems. In 2014 24th International Conference on Field Programmable Logic and Applications (FPL). Munich: Institute of Electrical and Electronics Engineers, 2014. p. 1-6. ISBN: 978-3-00-044645-0.Detail
MAZŮREK, I.; ROUPEC, J.; KLAPKA, M.; STRECKER, Z. Load and rheometric unit for the test of magnetorheological fluid. MECCANICA, 2013, vol. 48, no. 3, p. 631-641. ISSN: 0025-6455.Detail
JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P. Multifunkční jednotka pro snižování polutantů z odpadních plynů. In Ochrana Ovzdušia 2014. Kongres STUDIO, s.r.o., 2014. s. 120-123. ISBN: 978-80-89565-17-7.Detail
ŠVAŘÍČKOVÁ, I.; HORÁK, D. Technical Education Of Preschool And Schoolchildren. Turkish Online Journal of Educational Technology, 2015, vol. 2015, no. 2, p. 551-557. ISSN: 1303-6521.Detail
YADAV, R.; HAVLICA, J.; KUŘITKA, I.; KOŽÁKOVÁ, Z.; PALOU, M.; BARTONÍČKOVÁ, E.; BOHÁČ, M.; FRAJKOROVÁ, F.; MÁSILKO, J.; KALINA, L.; HAJDÚCHOVÁ, M.; ENEV, V.; WASSERBAUER, J. Magnetic Properties of Dysprosium-Doped Cobalt Ferrite Nanoparticles Synthesized by Starch-Assisted Sol-Gel Auto-Combustion Method. Journal of Superconductivity and Novel Magnetism, 2015, vol. 2015, no. 28, p. 2097-2107. ISSN: 1557-1947.Detail
PLÁŠEK, J.; ŠIKULA, O. Transient Numerical Simulation of Linear Thermal Transmittance in Software CalA. In Envibuild 2014. Advanced Materials Research. 2014. Switzerland: Trans Tech Publications, 2014. no. 1041, p. 281-284. ISBN: 978-3-03835-280-8. ISSN: 1022-6680.Detail
LEŠTINSKÝ, P.; STEHLÍK, P.; NAVRÁTIL, P.; VEČEŘ, M. Removing CO2 from biogas – the optimization of a PSA (pressure swing adsorption) unit using breakthrough curves. In Chemical Engineering Transaction. Chemical Engineering Transactions. Itálie: AIDIC Servizi S.r.l., 2014. p. 265-270. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.Detail
CHOUDHURY, D.; URBAN, F.; VRBKA, M.; HARTL, M.; KŘUPKA, I. A novel tribological study on DLC-coated micro-dimpled Orthopedics implant interface. Journal of the Mechanical Behavior of Biomedical Materials, 2015, vol. 2015, no. 45, p. 121-131. ISSN: 1751-6161.Detail
ORAVEC, P.; HRUBÁ, B.; LABUDEK, J. Diagnostics and optimalization of airtightness in experimental wooden structures. In 6th International Conference on Contemporary Problems of Architecture and Construction. 2014. s. xx (xx s.)ISBN: 978-80-248-3147-3.Detail
DLUGOŠ, J.; ROUPEC, J.; STRECKER, Z.; MAZŮREK, I. Problems of FEM Simulation of Magnetorheological Clutch's Magnetic Circuit. In Engineering Mechanics 2013. 19th international Conference. Praha: IT ASCR, 2013. p. 29-30. ISBN: 978-80-87012-46-8.Detail
KISELA, T. An analysis of the stability boundary for a linear fractional difference system. Mathematica Bohemica, 2015, vol. 140, no. 2, p. 195-203. ISSN: 0862-7959.Detail
BUDAY, P.; INGELI, R.; ČEKON, M. Advanced Thermal Performance Analysis of Thermal Break Element Applied in Balcony Slab. In enviBUILD 2014. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 167-170. ISBN: 978-3-03835-280-8. ISSN: 1022-6680.Detail
LÍZAL, F.; JEDELSKÝ, J.; ADAM, J.; BĚLKA, M.; JÍCHA, M. Measurement of Aerosol Deposition in a Replica of Human Airways by Positron Emission Tomography. Busan, Korea: Korean Association for Particle and Aerosol Research, 2014. p. 1 (1 s.). Detail
MAJER, Z.; NÁHLÍK, L. NUMERICAL ESTIMATION OF MICRO-CRACK PATHS IN POLYMER PARTICULATE COMPOSITE. In Engineering Mechanics 2014. 1. 2014. p. 376-379. ISBN: 978-80-214-4871-1.Detail
KLOC, P.; AUBRECHT, V.; COUFAL, O.; BARTLOVÁ, M. Influence of Copper Vapours on the Radiative Transfer in Thermal Air Plasma. In Proceedings of the XXth International Conference on Gas Discharges and Their Applications. Orléans: GREMI UMR 7344, 2014. p. 139-142. ISBN: 978-2-9548207-2-9.Detail
TOUŠ, M.; PAVLAS, M.; STEHLÍK, P. Waste-to-energy plant operation planning based on stochastic simulation. In Proceedings of the 17th CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION PRES 2014. 2014. p. 673-678. ISBN: 978-88-95608-30-3.Detail
MACKŮ, R.; KOKTAVÝ, P.; TRČKA, T. Anatomy of Excess Noise Sources and Electromagnetic Emission During Loading of Fibre Reinforced Composites. In Proceedings of the 4th International Conference of Engineering Against Failure. 2015. p. 511-518. ISBN: 978-960-88104-5-7.Detail
SEDLÁK, J.; SLANÝ, M.; FIALA, Z.; JAROŠ, A. Production Method of Implant Prototype of Knee-Joint Femoral Component. Manufacturing Technology, 2015, vol. 15, no. 2, p. 195-204. ISSN: 1213-2489.Detail
EKSIOGLU ÖZOK, Y.; PETRÁČEK, J. Self-pulsing in nonlinear Kerr-type coupled ring resonators with effect of loss. In Nonlinear Optics and Applications IX. Proc. SPIE. Bellingham: SPIE, 2015. p. 950309-1 (950309-8 p.)ISBN: 9781628416244.Detail
ČEKON, M.; INGELI, R. Účinnosť náterových hmôt na báze keramických dutých mikroguličiek vo vzťahu s tepelnou ochranou budov. In Tepelná ochrana budov 2013. Štrbské Pleso: BB Print s.r.o., 2013. s. 77-80. ISBN: 9788089627028.Detail
DRDA, M.; ŠIKULA, O.; PLÁŠEK, J. EKONOMICKO-ENVIRONMENTÁLNÍ ANALÝZA NÁVRHU VZT JEDNOTEK PRO TEPLOVZDUŠNÉ VYTÁPĚNÍ – PŘÍPADOVÁ STUDIE. In Konference Vytápění Třeboň 2013. Praha: Společnost pro techniku prostředí, 2013. s. 254-258. ISBN: 9788002024316.Detail
FINTOVÁ, S.; KUNZ, L. Cyclic plastic behavior and fatigue life of AZ91 alloy in as-cast and ultrafine-grained state. Materiálové inžinierstvo, 2014, vol. 21, no. 3, p. 109-115. ISSN: 1335-0803.Detail
Hee Ay Ching, Dipankar Choudhury, Md Julker Nine, Noor Azuan Abu Osman. Effects of surface coating on reducing friction and wear of orthopaedic implants. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2014, vol. 15, no. 1, p. 1-21. ISSN: 1878-5514.Detail
ŠKVARENINA, Ľ. Current Fluctuations of Reverse-Biased Solar Cells. In Proceedings of the 21st Conference STUDENT EEICT 201. Brno: Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015. p. 546-550. ISBN: 978-80-214-5148-3.Detail
LEŠTINSKÝ, P.; VEČEŘ, M.; VAŸRYNEN, P.; WICHTERLE, K. The effect of the draft tube geometry on mixing in a reactor with an internal circulation loop - A CFD simulation. Chemical Engineering and Processing-Process Intensification, 2015, vol. 94, no. 8, p. 29-34. ISSN: 0255-2701.Detail
ŠOTNER, R.; HERENCSÁR, N.; JEŘÁBEK, J.; PROKOP, R.; KARTCI, A.; DOSTÁL, T.; VRBA, K. Z-Copy Controlled-Gain Voltage Differencing Current Conveyor: Advanced Possibilities in Direct Electronic Control of First-Order Filter. Elektronika Ir Elektrotechnika, 2014, vol. 20, no. 6, p. 77-83. ISSN: 1392-1215.Detail
DOBAI, R.; SEKANINA, L. Image Filter Evolution on the Xilinx Zynq Platform. Proceedings of the 2013 NASA/ESA Conference on Adaptive Hardware and Systems. Torino: IEEE Circuits and Systems Society, 2013. p. 164-171. ISBN: 978-1-4673-6381-5.Detail
BOHÁČ, M.; PALOU, M.; NOVOTNÝ, R.; MÁSILKO, J.; VŠIANSKÝ, D.; STANĚK, T. Investigation on early hydration of ternary Portland cement-blast-furnace slag-metakaolin blends. Construction and Building Materials, 2014, vol. 2014, no. 64, p. 333-341. ISSN: 0950-0618.Detail
VÍTOVEC, J. Critical oscillation constant for Euler-type dynamic equations on time scales. APPLIED MATHEMATICS AND COMPUTATION, 2014, vol. 243, no. 7, p. 838-848. ISSN: 0096-3003.Detail
ROY, S.; KUMAR, A.; PROVAZNÍK, I. Virtual screening, ADMET profiling, molecular docking and dynamics approaches to search for potent selective natural molecule based inhibitors against metallothionein-III to study Alzheimer's disease. In Proceedings IEEE International Conference on Bioinformatics and Biomedicine (BIBM). Belfast, United Kingdom: IEEE, 2014. p. 352-356. ISBN: 978-1-4799-5669-2.Detail
JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P.; SKRYJA, P. Návrh multifunkční poloprovozní jednotky pro snižování polutantů z odpadního plynu. In CHISA 2013 - plné texty příspěvků. 1. Srní: ČSCHI, 2013. s. B 4.3 (B 4.5 s.)ISBN: 978-80-02-02500-9.Detail
REBENDA, J.; ŠMARDA, Z. Stability of a Functional Differential System with a Finite Number of Delays. Abstract and Applied Analysis, 2013, vol. 2013, no. Article ID 85313, p. 1-11. ISSN: 1085-3375.Detail
PÍŠKA, M.; SEDLÁK, J.; PEKÁRKOVÁ, E. New Technologies for Individual Joint Implants. In Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies, NEWTECH 2013. Stockholm, Sweden: Universitetsservice US AB, 2013. p. 263-272. ISBN: 978-91-7501-893-5.Detail
VONDÁL, J.; HÁJEK, J. Comparison of SAS Turbulence Model to the SST k-omega in Non-Premixed Combustion Simulation. Proceedings of 14th European Turbulence Conference. Lyon, Francie: 2013. p. 1-2. Detail
ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; PROKOP, R.; VRBA, K.; DOSTÁL, T. Resistor-less First-Order Filter Design with Electronical Reconfiguration of its Transfer Function. In Proceedings of the 24th International Conference Radioelektronika 2014. Bratislava, Slovakia: 2014. p. 63-66. ISBN: 978-1-4799-3715-8.Detail
KISELA, T.; ČERMÁK, J. Asymptotic Stability Of Dynamic Equations With Two Fractional Terms: Continuous Versus Discrete Case. Fractional Calculus and Applied Analysis, 2015, vol. 18, no. 2, p. 437-458. ISSN: 1311-0454.Detail
PLÁŠEK, J.; ŠIKULA, O. Numerická simulace rozložení střední radiační teploty v hale provozního ošetření vozů metra, vytápěné sálavými panely. Vytápění, větrání, instalace, 2013, roč. 2013, č. 5, s. 230-232. ISSN: 1210-1389.Detail
MENŠÍK, P.; STARÝ, M.; MARTON, D. Using Predictive Model of Mean Monthly Flows for Large Open Reservoirs Hydropower Control. In Procedia Engineering. Procedia Engineering. Amsterdam: Elsevier Science Publishers, 2014. no. 12, p. 1486-1492. ISSN: 1877-7058.Detail
Subir Ghosh, Dipankar Choudhury, Nabangshu Shekhar das, Belinda Pingguan-Murphy. Tribological role of synovial fluid compositions on artificial joints a systematic review of the last ten. Lubrication Science, 2014, vol. 26, no. 6, p. 387-410. ISSN: 1557-6833.Detail
UPADHYAY, H.; DWIVEDI, G.; ROY, S.; SHARMA, A.; DAROKAR, M.; SRIVASTAVA, S. Phytol Derivatives as Drug Resistance Reversal Agents. ChemMedChem, 2014, vol. 9, no. 8, p. 1860-1868. ISSN: 1860-7187.Detail
ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; VRBA, K.; DOSTÁL, T. Features of multi-loop structures with OTAs and adjustable current amplifier for second-order multiphase/quadrature oscillators. AEU-INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATIONS, 2015, vol. 69, no. 5, p. 814-822. ISSN: 1434-8411.Detail
JECHA, D.; BÉBAR, L.; BRUMMER, V.; LEŠTINSKÝ, P.; Vysoké učení technické v Brně, Brno, CZ: Homogenizační zařízení s nástřikem kapaliny. 28048, Užitný vzor. (2015)Detail
HÁJEK, J.; JUŘENA, T.; VONDÁL, J.; Vysoké učení technické v Brně, Brno, CZ: Redukční ventil. 28199, Užitný vzor. (2015)Detail
VACULOVIČOVÁ, M.; ZÍTKA, J.; ADAM, V.; KIZEK, R.; Vysoké učení technické v Brně, Brno, CZ: 3D-tištěný optický detektor pro mikro-kolonové separace. 28931, Užitný vzor. (2015)Detail
PAVLÍK, F.; SOBOTKOVÁ, V.; DUMBROVSKÝ, M.; DRONGOVÁ, K.; UHROVÁ, J.; Vysoké učení technické v Brně, Brno, CZ.: Zařízení pro volumetrickou kvantifikaci projevů vodní eroze půdy v efemérních rýhách. 25471, Užitný vzor. (2013)Detail
VONDÁL, J.; HÁJEK, J.; Vysoké učení technické v Brně, Brno, CZ: Zařízení pro výrobu cementového slínku. 28930, Užitný vzor. (2015)Detail
ČEKON, M.; Vysoké učení technické v Brně: Keramická tvarovka s nízkoemisivní povrchovou úpravou dutin. 28821, Užitný vzor. (2015)Detail
STRECKER, Z.; MAZŮREK, I.; ROUPEC, J.; Vysoké učení technické v Brně Technická 2896/2 616 69 BRNO Česká Republika: Ovládací obvod magnetoreologického tlumiče. 304636, Patent. (2014)Detail
ČEKON, M.; KALOUSEK, M.; HRAŠKA, J. Verification of MZELWE moule in ESP-r programme with experimental confrontation. In Research and Applications in Structural Engineering, Mechanics and Computation. CRC Press, Taylor&Francis Group. Cape Town, JAR: CRC Press, Balkema, Taylor&Francis Group, 2013. p. 1813-1818. ISBN: 978-1-315-85078-8.Detail
FRÝBA, L.; BÉBAR, L.; TOUŠ, M. Analysis of Requirement for Sewage Sludge Incineration. In Proceedings of the 17th CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION PRES 2014. Chemical Engineering Transactions. Milano, Italy: AIDIC Servizi S.r.l., 2014. p. 631-636. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.Detail
MAJER, Z.; NÁHLÍK, L. Influence of Interphase Imperfection on Micro-Crack Behavior in Polymer Composites Filled by Rigid Particles. In Local Mechanical Properties IX. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. no. 1, p. 194-197. ISBN: 978-3-03785-876-9. ISSN: 1013-9826.Detail
ČEKON, M. Thermal performance analyzing of hollow microspheres coatings for building energy efficiency. Book of Abstracts CEITEC Annual Conference “Frontiers in Material and Life Sciences”. first. Brno: Published by Masaryk University, Brno, 2014. p. 107-107. ISBN: 978-80-210-7159.Detail
PLÁŠEK, J.; ŠIKULA, O. NUMERICKÁ SIMULACE ROZLOŽENÍ STŘEDNÍ RADIAČNÍ TEPLOTY V HALE PROVOZNÍHO OŠETŘENÍ VOZŮ METRA VYTÁPĚNÉ SÁLAVÝMI OTOPNÝMI PANELY. In Konference Vytápění Třeboň 2013. Praha: Společnost pro techniku prostředí, 2013. s. 271-275. ISBN: 9788002024316.Detail
VONDÁL, J.; HÁJEK, J. Heat Flux Measurement Methods for Process Furnaces – a Case Study. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 1153-1158. ISSN: 1974-9791.Detail
CHOUDHURY, D.; CHING, H.A.; MAMAT, A.B.; ČÍŽEK, J.; ABU OSMAN, N.A.; VRBKA, M.; HARTL, M.; KŘUPKA, I. Fabrication and characterization of DLC coated microdimples on hip prosthesis heads. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2015, vol. 103, no. 5, p. 1002-1012. ISSN: 1552-4973.Detail
ORAVEC, P. Typical renovation measures of brick houses from 1970 - 1990. In International Multidisciplinary Scientific Geoconferences. 2014. p. 27-32. ISBN: 978-619-7105-12-4.Detail
SOBOTKOVÁ, V.; ŠARAPATKA, B.; DUMBROVSKÝ, M.; UHROVÁ, J.; BEDNÁŘ, M. The Influence of Conservation Measures, Limiting Soil Degradation, on the Quality of Surface Water Resources. World Academy of Science, Engineering and Technology, 2014, vol. 8, no. 10, p. 275-280. ISSN: 1307-6892.Detail
RYBA, L.; DOKOUPIL, J.; VODA, A.; BESANCON, G. A real-time inverse-based hysteresis compensation with adaptation. In 54th IEEE Conference on Decision and Control. 54th IEEE Conference on Decision and Control. Institute of electrical and electronics engineers inc., 2015. p. 7335-7340. ISBN: 978-1-4799-7884-7. ISSN: 0743-1546.Detail
ARZAGHI, M.; FINTOVÁ, S.; SARRAZIN-BAUDOUX, C.; KUNZ, L.; PETIT, J. Near threshold fatigue crack growth in ultrafinegrained copper. IOP Conference Series: Materials Science and Engineering, 2014, vol. 63, no. 1, p. 1-9. ISSN: 1757-8981.Detail
ORAVEC, P.; PARTIKA, R.; KALOUSEK, M. Poznatky z návrhu a realizace obnovy domu. Zborník z konferencie s medzinárodnou účasťou PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV. Košice: 2014. s. 58-61. ISBN: 978-80-553-1678-9.Detail
VONDÁL, J.; HÁJEK, J. Numerical Flow Field Prediction Downstream of Axial Guide Vane Swirl Generator. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: AIDIC Servizi S.r.l., 2014. p. 907-912. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.Detail
ŠMERKOVÁ, K.; DOSTÁLOVÁ, S.; ŠKUTKOVÁ, H.; VACULOVIČOVÁ, M.; ADAM, V.; PROVAZNÍK, I.; KIZEK, R. Isolation of Xis Gen Fragment of lambda Phage from Agarose Gel Using Magnetic Particles for Subsequent Enzymatic DNA Sequencing. CHROMATOGRAPHIA, 2012, vol. 2012, no. 10, p. 1-6. ISSN: 0009-5893.Detail
ČEKON, M.; KALOUSEK, M. "Reflexné" vlastnosti stavebných náterov. In Tepelná ochrana budov 2013. Štrbské Pleso: BB Print s.r.o., 2013. s. 73-76. ISBN: 9788089627028.Detail
DOKOUPIL, J.; VÁCLAVEK, P. Bayesian change detection in the growing window recursive strategy. In Applied mechanics and materials. Applied Mechanics and Materials. Německo: Trans Tech Publications Ltd, 2015. p. 399-403. ISBN: 978-3-03835-499-4. ISSN: 1660-9336.Detail
Khan S., Verma V., Verma S., POLZER S. and Jha S. Assessing the potential risk of rupture of abdominal aortic aneurysms. CLINICAL RADIOLOGY, 2015, vol. 70, no. 1, p. 11-20. ISSN: 0009-9260.Detail
Link
http://www.isvav.cz/projectDetail.do?rowId=EE2.3.30.0039
Responsibility: Tomešová Lucie, Ing., MPA