Podstatou projektu je podpořit studenty zejména doktorského studijního oboru "Konstrukční a procesní inženýrství" při výzkumu a aplikaci výpočtových a experimentálních metod v oblasti mobilních systémů. Projekt je zaměřen na specifické problémy mechanických a tepelně-mechanických struktur těchto systémů.

FSI-S-17-4104

Czech

Píštěk Václav, prof. Ing., DrSc. - principal person responsible
Bartošová Daniela, Ing. - fellow researcher
Bazala Jiří, Ing., Ph.D. - fellow researcher
Dlugoš Jozef, Ing., Ph.D. - fellow researcher
Drbal Milan, Ing., Ph.D. - fellow researcher
Fojtášek Jan, Ing., Ph.D. - fellow researcher
Janoušek Michal, Ing., Ph.D. - fellow researcher
Kučera Pavel, doc. Ing., Ph.D. - fellow researcher
Malášek Jiří, doc. Ing., Ph.D. - fellow researcher
Novotný Pavel, prof. Ing., Ph.D. - fellow researcher
Pokorný Prokop, Ing. - fellow researcher
Porteš Petr, doc. Ing., Ph.D. - fellow researcher
Prokop Aleš, Ing., Ph.D. - fellow researcher
Řehák Kamil, Ing., Ph.D. - fellow researcher
Škopán Miroslav, doc. Ing., CSc. - fellow researcher
Špičák Milan, Ing., Ph.D. - fellow researcher
Vajdák Martin, Ing. - fellow researcher
Zeizinger Lukáš, Ing., Ph.D. - fellow researcher

Institute of Automotive Engineering
- responsible department (2.10.2017 - not assigned)
Institute of Automotive Engineering
- internal (1.1.2017 - 31.12.2019)
Faculty of Mechanical Engineering
- beneficiary (1.1.2017 - 31.12.2019)

ŠKOPÁN, M. Recyklace stavebních a demoličních odpadů v ČR v podmínkách novelizované legislativy. Waste forum, 2017, roč. 2017, č. 5, s. 505-510. ISSN: 1804-0195.
Detail

ZHÁŇAL, L.; PORTEŠ, P. Calculation of mechanism motion using discrete time approach. Vibroengineering Procedia, 2018, vol. 18, no. 18, p. 222-225. ISSN: 2345-0533.
Detail

DRBAL, M. Computational Model of Rotary Engine Thermodynamic Cycle. Acta Mechanica Slovaca, 2019, vol. 23, no. 2, p. 26-29. ISSN: 1335-2393.
Detail

NOVOTNÝ, P.; HRABOVSKÝ, J. Efficient computational modelling of low loaded bearings of turbocharger rotors. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, vol. 174, no. 2020, p. 374-383. ISSN: 0020-7403.
Detail

HÉBERT, G.; BAZALA, J.; FISCHER, O.; NOTHBAUM, J.; THEWES, M.; VOSSHALL, T. Exhaust Gas Condensate as an Enabler for Self-Contained Water Injection Systems. In 28th. Aachen Colloquium Automovile and Engine Technology 2019. 2019. p. 1081-1102. ISBN: 978-3-00-060311-2.
Detail

BAZALA, J.; FISCHER, O.; HÉBERT, G. Effect of Cooler Design on Particulate fouling. In Heat Exchanger Fouling and Cleaning XI - 2017. 2017. p. 70-74. ISBN: 978-0-9984188-0-3.
Detail

NOVOTNÝ, P.; HRABOVSKÝ, J. Review of methods for increasing the mechanical efficiency of exhaust gas turbochargers. In Proceedings of the L. International Scientific Conference of Czech and Slovak Universities and Institutions Dealing with Motor Vehicles and Internal Combustion Engines Research – KOKA 2019. 1. Nitra: Publishing Centre of Slovak University of Agriculture in Nitra, 2019. p. 225-234. ISBN: 978-80-7509-668-5.
Detail

NOVOTNÝ, P.; ŠKARA, P. Multibody simulation of turbocharger transient rotordynamics. In ENGINEERING MECHANICS 2019. First edition. 2019. p. 259-262. ISBN: 978-80-87012-71-0.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Dynamic load effect on the transportation safety of tank containers as part of combined trains on railway ferries. In Vibroengineering Procedia. Vibroengineering Procedia. 2019. p. 124-129. ISSN: 2345-0533.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Dynamic load computational modelling of containers placed on a flat wagon at railroad ferry transportation. In Vibroengineering Procedia. Vibroengineering Procedia. 2019. p. 118-123. ISSN: 2345-0533.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Strength determination of wagon bearing structures made of round pipes at railroad ferry transportation. In Vibroengineering Procedia. Vibroengineering Procedia. 2019. p. 100-105. ISSN: 2345-0533.
Detail

PROKOP, A.; ŘEHÁK, K. Gear Shift Simulation by Using Virtual Prototype. In Vibroengineering PROCEDIA, Vol. 29. Vibroengineering Procedia. 2019. p. 6-11. ISSN: 2345-0533.
Detail

OTIPKA, V.; ZAJAC, R.; ŘEHÁK, K.; PROKOP, A. Numerical dynamic analysis of gearbox behaviour. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 433-441. ISBN: 978-3-030-54135-4.
Detail

ŘEHÁK, K.; PROKOP, A.; ZAJAC, R.; OTIPKA, V. Acoustic and Vibration Response Analysis of Heavy-Duty Gearbox. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 443-451. ISBN: 978-3-030-54135-4.
Detail

PROKOP, A.; ŘEHÁK, K.; ZAJAC, R.; OTIPKA, V. Gear Shift Investigation Using Virtual Prototype. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 415-424. ISBN: 978-3-030-54135-4.
Detail

ŘEHÁK, K.; KUČERA, P.; PROKOP, A. Application of Virtual Prototype to Heavy-duty Gearbox housing evaluation. In TRANSBALTICA XI: Transportation Science and Technology. Cham: Springer International Publishing, 2019. p. 361-368. ISBN: 978-3-030-38665-8.
Detail

KRPALEK, D.; PROKOP, A.; ŘEHÁK, K. Innovative Technology Application for Design of Bogie Drive Components. 2019.
Detail

MAUDER, T.; PORTEŠ, P.: Random Road; Random Road v.01. Budova A3, místnost 301, areál FSI, VUT v Brně. URL: http://www.uadi.fme.vutbr.cz/vyzkum-produkty-vav. (software)
Detail

KAŠPÁREK, J.; ŠKOPÁN, M.; POKORNÝ, P.; HLOUŠEK, D. Reverse analysis of the frame destruction causes. In Transport Means 2019, Sustainability: Research and Solutions – Proceedings of the 23rd International Scientific Conference. Transport Means. Palanga, Lithuania: Kaunas university of technology, 2019. p. 1364-1369. ISSN: 1822-296X.
Detail

DRÁPAL, L.; VOPAŘIL, J. Modification of Valve Train with Overhead Valves of Inverted Aircraft Reciprocating Engine. In Transport Means 2019, Sustainability: Research and Solutions – Proceedings of the 23rd International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2019. p. 734-737. ISSN: 1822-296X.
Detail

Responsibility: Píštěk Václav, prof. Ing., DrSc.