Detail publikačního výsledku

Transmission error analysis for heavy-duty gearbox

KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K.

Original Title

Transmission error analysis for heavy-duty gearbox

English Title

Transmission error analysis for heavy-duty gearbox

Type

Paper in proceedings (conference paper)

Original Abstract

This paper deals with an analysis of the transmission error. For this purpose, the measuring loop was assembled from two gear boxes. Subsequently, angles, torque and shaft speed were set or measured. For the evaluation a calculation method was used and the impact of the different transmitted torque was evaluated. The measuring loop enables to test at different operation conditions of torque and shaft rotation direction. In this paper, the static transmission error analysis for braking mode at 50 rpm shaft speed and torque range from 600 to 2400 Nm is described.

English abstract

This paper deals with an analysis of the transmission error. For this purpose, the measuring loop was assembled from two gear boxes. Subsequently, angles, torque and shaft speed were set or measured. For the evaluation a calculation method was used and the impact of the different transmitted torque was evaluated. The measuring loop enables to test at different operation conditions of torque and shaft rotation direction. In this paper, the static transmission error analysis for braking mode at 50 rpm shaft speed and torque range from 600 to 2400 Nm is described.

Keywords

transmission error, gearbox, Matlab, measurement, torque, tooth

Key words in English

transmission error, gearbox, Matlab, measurement, torque, tooth

Authors

KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K.

RIV year

2019

Released

22.05.2018

Publisher

JVE Intenational

Location

Kaunas, Lithuania

Book

Vibroengineering PROCEDIA

ISBN

2345-0533

Periodical

Vibroengineering Procedia

Volume

18

Number

1

State

Republic of Lithuania

Pages from

113

Pages to

116

Pages count

4

URL

https://www.jvejournals.com/article/19919/

Full text in the Digital Library

http://hdl.handle.net/11012/84191

BibTex

@inproceedings{BUT147700,
  author="Pavel {Kučera} and Václav {Píštěk} and Aleš {Prokop} and Kamil {Řehák}",
  title="Transmission error analysis for heavy-duty gearbox",
  booktitle="Vibroengineering PROCEDIA",
  year="2018",
  journal="Vibroengineering Procedia",
  volume="18",
  number="1",
  pages="113--116",
  publisher="JVE Intenational",
  address="Kaunas, Lithuania",
  doi="10.21595/vp.2018.19919",
  issn="2345-0533",
  url="https://www.jvejournals.com/article/19919/"
}

Documents

VP-18-19919