Přístupnostní navigace
E-application
Search Search Close
doc. Ing.
Ph.D.
CEITEC, RG-2-11 – Researcher
+420 54114 9717david.salamon@ceitec.vutbr.cz
Send BUT message
2026
PAREDES SÁNCHEZ, C.; ROLEČEK, J.; OLIVER URRUTIA, C.; MAŘÁK, V.; SALAMON, D.; MIRANDA, P. Effect of hydrothermal surface modification on the biological and mechanical performance of β-TCP scaffolds fabricated by DLP. Journal of the European Ceramic Society, 2026, vol. 46, iss. 14, p. 1-11.
WoS Article
RONSCHAK, J.; VALÁŠEK, D.; SALAMON, D. Formation of a high entropy carbide layer on VNbTaMoW by solid carbon diffusion in high entropy alloy surface layer. Open Ceramics, 2026, vol. 26, iss. June, p. 1-4.
2025
Prötsch, T.; Schlacher, J.; Arthaud, A.; Salamon, D.; Kraleva, I.; Bermejo, R. Bio-inspired damage-tolerant alumina-based layered ceramics through rapid sintering. Journal of the American Ceramic Society, 2025, vol. 2, iss. 28.5.2025, p. 1-15. ISSN: 1551-2916.
2024
VALÁŠEK, D.; POUCHLÝ, V.; SALAMON, D. Turning of high entropy alloy into high entropy carbides by modifying carbon content during reactive sintering. Ceramics International, 2024, vol. 50, iss. 9, p. 15367-15372. ISSN: 1873-3956.
Wang, CM.; Gao, HY.; Zhou, XY.; Ma, WG.; Tan, H.; Samart, C.; Salamon, D.; Yan, CZ.; Zhang, HB. Design, fabrication, and characterization of 1-3 piezoelectric composite air-coupled ultrasonic transducers with micro-membrane filter matching layer. SENSORS AND ACTUATORS A-PHYSICAL, 2024, vol. 379, iss. 115955, p. 1-11. ISSN: 1873-3069.
Pejchalová, L.; Pejchal, J.; Roleček, J.; Vojníkova, M.; Chlup, Z.; Mařák, V.; González-Sánchez, M.; Čížková, J.; Salamon, D. In Vivo Assessment on Freeze-Cast Calcium Phosphate-Based Scaffolds with a Selective Cell/Tissue Ingrowth. ACS Applied Materials & Interfaces, 2024, vol. 16, iss. 43, p. 58326-58336. ISSN: 1944-8244.
SIDDIQUI, M.; SALAMON, D. Scaffold microstructure evolution via freeze-casting and hydrothermal phase transformation of calcium phosphate. Journal of the American Ceramic Society, 2024, vol. 107, iss. 12, p. 7994-8006. ISSN: 1551-2916.
2023
SOKOLA, P.; KALINA, M.; SMILEK, J.; PTÁČEK, P.; KROUSKÁ, J.; SALAMON, D.; SPUSTA, T. Kinetic stability and rheological properties of photosensitive zirconia suspensions for DLP printing. Ceramics International, 2023, vol. 49, iss. 11PB, p. 18508-18515. ISSN: 0272-8842.
SIDDIQUI, M.; VALÁŠEK, D.; BAI, Y.; SALAMON, D. Phase transformation of cold-sintered doped barium titanate ceramics during the post-annealing process. Open Ceramics, 2023, vol. 15, iss. 1, p. 1-7. ISSN: 2666-5395.
Wu, T.Q.; Zhang, W.; Liu, F.F.; Dou, Z.M.; Han, S.Q.; Fan, P.Y.; Chen, S.G.; Samart, C.; Salamon, D.; Tan, H.; Zhang, H.B. Enhanced piezoelectric properties in BF-BT based lead-free ferroelectric ceramics for high-temperature devices. Ceramics International, 2023, vol. 49, iss. 2, p. 1820-1825. ISSN: 1873-3956.
SALAMON, D.; BUKVIŠOVÁ, K.; JAN, V.; POTOČEK, M.; ČECHAL, J. Superflux of an organic adlayer towards its local reactive immobilization. Communications Chemistry, 2023, vol. 6, iss. 1, p. 1-8. ISSN: 2399-3669.
PAREDES SÁNCHEZ, C.; ROLEČEK, J.; PEJCHALOVÁ, L.; SPUSTA, T.; SALAMON, D.; MIRANDA, P. Evaluating the suitability of fast sintering techniques for the consolidation of calcium phosphate scaffolds produced by DLP. Journal of the European Ceramic Society, 2023, vol. 43, iss. 14, p. 6493-6503. ISSN: 1873-619X.
2022
TAN, H.; ZHANG, H.; SALAMON, D. Densification behavior and mechanical properties of nano-alumina ceramics prepared by Spark Plasma Sintering with pressure applied at different sintering stages. Ceramics International, 2022, vol. 48, iss. 20, p. 30224-30228. ISSN: 1873-3956.
Zhou, XY.; Liu, K.; Yan, ZL.; Xie, B.; Fan, PY.; Chen, SG.; Samart, C.; Salamon, D.; Tan, H.; Fan, ZM.; Zhang, HB. High energy storage efficiency of NBT-SBT lead-free ferroelectric ceramics. Ceramics International, 2022, vol. 48, iss. 16, p. 23266-23272. ISSN: 1873-3956.
Tan, H.; Yan, ZL.; Chen, SG.; Samart, C.; Takesue, N.; Salamon, D.; Liu, Y.; Zhang, HB. SPS prepared NN-24SBT lead-free relaxor-antiferroelectric ceramics with ultrahigh energy-storage density and efficiency. SCRIPTA MATERIALIA, 2022, vol. 210, iss. 1, p. 1-3. ISSN: 1359-6462.
D. You, H. Tan, Z. Yan, H. Gao, S. Chen, W. Ma, P. Fan, N.M.A. Tran, Y. Liu, D. Salamon, H. Zhang. Enhanced Dielectric Energy Storage Performance of 0.45Na(0.5)Bi(0.5)TiO(3)-0.55Sr(0.7)Bi(0.2)TiO(3)/AlN 0-3 Type Lead-Free Composite Ceramics. ACS Applied Materials & Interfaces, 2022, vol. 14, iss. 15, p. 17652-17661. ISSN: 1944-8244.
Yang, HB.; Sun, YY.; Gao, HY.; Zhou, XY.; Tan, H.; Shu, C.; Salamon, D.; Guan, SB.; Chen, SG.; Zhang, HB. Lead-Free BF-BT Ceramics With Ultrahigh Curie Temperature for Piezoelectric Accelerometer. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2022, vol. 69, iss. 11, p. 3102-3107. ISSN: 1525-8955.
PAREDES SÁNCHEZ, C.; ROLEČEK, J.; PEJCHALOVÁ, L.; MIRANDA MENDES, J.; SALAMON, D. Impact of residual carbon after DLP and SPS-Sintering on compressive strength and in-VITRO bioactivity of calcium phosphate scaffolds. Open Ceramics, 2022, vol. 11, iss. 1, p. 100281-1 (100281-9 p.)ISSN: 2666-5395.
2021
LI, L.; FAN, P.; WANG, M.; TAKESUE, N.; SALAMON, D.; VTYURIN, A.; ZHANG, Y.; TAN, H.; NAN, B.; LU,Y.; ZHANG, H. Review of lead-free Bi-based dielectric ceramics for energy-storage applications. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2021, vol. 54, iss. 29, p. 293001-1 (293001-20 p.)ISSN: 1361-6463.
PEJCHALOVÁ, L.; ROLEČEK, J.; SALAMON, D. Why freeze-casting brings different phase composition of calcium phosphates?. Open Ceramics, 2021, vol. 7, iss. 1, p. 1595-1602. ISSN: 2666-5395.
Scopus Article
WEI,T.; LIU, K.; FAN, P.Y.; LU, DJ.; YE, B.; ZHOU, CR.; YANG, H.; TAN, H.; SALAMON, D.; NAN, B.; ZHANG, H. Novel NaNbO3-Sr0.7Bi0.2TiO3 lead-free dielectric ceramics with excellent energy storage properties. Ceramics International, 2021, vol. 47, iss. 3, p. 3713-3719. ISSN: 1873-3956.
FAN, PY.; LIU, K.; MA, W.G.; TAN, H.; ZHANG, Q.; ZHANG, L.; ZHOU, C.R.; SALAMON, D.; ZHANG, S.T.; ZHANG, Y. J.; NAN, B.; ZHANG, H. Progress and perspective of high strain NBT-based lead-free piezoceramics and multilayer actuators. Journal of Materiomics, 2021, vol. 7, iss. 3, p. 508-544. ISSN: 2352-8478.
2020
SALAMON, D. Encyclopedia of Materials: Technical Ceramics and Glasses Flash SinteringandOtherRapidSinteringTechniques. In Encyclopedia of Materials: Technical Ceramics and Glasses. Amsterodam: Elsevier, 2020. p. 103.ISBN: 9780128185421.
Chapter in a book
Pengyuan Fan, Shan-Tao Zhang, Jiwen Xu, Jiadong Zang, Chanatip Samart, Ting Zhang, Hua Tan, David Salamon, Haibo Zhang, Gang Liu. Relaxor/antiferroelectric composites: a solution to achieve high energy storage performance in lead-free dielectric ceramics. Journal of Materials Chemistry C, 2020, vol. 8, iss. 17, p. 5681-5691. ISSN: 2050-7526.
Marwat, MA. ; Ma, WG.; Fan, PY.; Elahi, H.; Samart, C.; Nan, B.; Tan, H.; Salamon, D.; Ye, BH.; Zhang, HB. Ultrahigh energy density and thermal stability in sandwich-structured nanocomposites with dopamine Ag BaTiO3. Energy Storage Materials, 2020, vol. 31, iss. 1, p. 492-504. ISSN: 2405-8297.
Zhang, Haibo; Wei, Tian; Zhang, Qi; Ma, Weigang; Fan, Pengyuan; Salamon, David; Zhang, Shan-Tao; Nan, Bo; Tan, Hua; Ye, Zuo-Guang. A review on the development of lead-free ferroelectric energy-storage ceramics and multilayer capacitors. Journal of Materials Chemistry C, 2020, vol. 8, iss. 47, p. 16648-16667. ISSN: 2050-7526.
2019
Marwat, M.A.a, Xie, B., Zhu, Y., Fan, P., Ma, W., Liu, H., Ashtar, M., Xiao, J., Salamon, D., Samart, C., Zhang, H. Largely enhanced discharge energy density in linear polymer nanocomposites by designing a sandwich structure. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, vol. 121, iss. 6, p. 115-122. ISSN: 1359-835X.
HOLEŇÁK, R.; SPUSTA, T.; POTOČEK, M.; SALAMON, D.; ŠIKOLA, T.; BÁBOR, P. 3D localization of spinel (MgAl2O4) and sodium contamination in alumina by TOF-SIMS. Materials characterization, 2019, vol. 148, iss. 1, p. 252-258. ISSN: 1044-5803.
Ma, W.; Fan, P.; Salamon, D.; Kongparakul, S.; Samart, C.; Zhang, T.; Zhang, G.; Jiang, S.; Chang, J.-J.; Zhang, H. Fine-grained BNT-based lead-free composite ceramics with high energy-storage density. Ceramics International, 2019, vol. 44, iss. 9, p. 24392-24397. ISSN: 1873-3956.
CASAS LUNA, M.; TAN, H.; TKACHENKO, S.; SALAMON, D.; MONTUFAR JIMENEZ, E. Enhancement of mechanical properties of 3D-plotted tricalcium phosphate scaffolds by rapid sintering. Journal of the European Ceramic Society, 2019, vol. 39, iss. 14, p. 4366-4374. ISSN: 0955-2219.
Mei Li, Pengyuan Fan, Weigang Ma, Kai Liu, Jiadong Zhang, Chanatip Samart, Ting Zhang, Hua Tan, David Salamon, Haibo Zhang. Constructing layered structures to enhance the breakdown strength and energy density of Na0.5Bi0.5TiO3-based lead-free dielectric ceramics. Journal of Materials Chemistry C, 2019, vol. 7, iss. 48, p. 15292-15300. ISSN: 2050-7534.
ROLEČEK, J.; PEJCHALOVÁ, L.; MARTÍNEZ-VÁZQUEZ, F.; MIRANDA GONZÁLEZ, P.; SALAMON, D. Bioceramic scaffolds fabrication: indirect 3D printing combined with ice-templating vs. robocasting. Journal of the European Ceramic Society, 2019, vol. 39, iss. 4, p. 1595-1602. ISSN: 0955-2219.
TAN, H.; KALOUSEK, R.; SALAMON, D. Increasing energy efficiency by tailoring the electric pulse pattern during Spark Plasma Sintering. Ceramics International, 2019, vol. 44, iss. 9, p. 24392-24397. ISSN: 1873-3956.
Weigang Ma, Yiwei Zhu, Mohsin Ali Marwat, Pengyuan Fan, Bing Xie, David Salamon, Zuo-Guang Ye and Haibo Zhang. Enhanced energy-storage performance with excellent stability under low electric fields in BNT–ST relaxor ferroelectric ceramics. Journal of Materials Chemistry C, 2019, vol. 7, iss. 2, p. 281-288. ISSN: 2050-7534.
2018
FORAL, Š.; KATOVSKÝ, K.; VARMUŽA, J.; SALAMON, D.; ROLEČEK, J. Modelling of an accident tolerant fuel design using FEMAXI6. In Proceedings of the Top Fuel 2018 Conference, part III. European Nuclear Society, 2018. iss. 1, p. 361-369. ISBN: 9789295064324.
Paper in proceedings (conference paper)
FORAL, Š.; KATOVSKÝ, K.; VARMUŽA, J.; SALAMON, D.; ROLEČEK, J. The Influence of the Fuel Thermal Conductivity on the Core Temperatures during LOCA Accident. In Proccedings of the 2018 19 th International Scientific Conference on Electric Power Engineering (EPE). 2018. p. 546-550. ISBN: 978-1-5386-4611-3.
PRAJZLER, V.; SALAMON, D.; MACA, K. Pressure-less rapid rate sintering of pre-sintered alumina and zirconia ceramics. Ceramics International, 2018, vol. 44, iss. 9, p. 10840-10846. ISSN: 1873-3956.
DRDLÍK, D.; ROLEČEK, J.; DRDLÍKOVÁ, K.; SALAMON, D. Restraining of calcium contamination in near-net shape alumina ceramics during slip casting. International journal of applied ceramic technology, 2018, vol. 15, iss. 6, p. 1559-1566. ISSN: 1744-7402.
DRDLÍK, D.; MAŘÁK, V.; ROLEČEK, J.; DRDLÍKOVÁ, K.; KRATOCHVÍL, J.; SALAMON, D. Study of Alumina and Alumina-Silicon Carbide Layered Composites Sintered by SPS. Key Engineering Materials (print), 2018, vol. 784, iss. 1, p. 67-72. ISSN: 1013-9826.
Peer-reviewed article not indexed in WoS or Scopus
2017
MOTEALLEH A.; EQTESADI S.; PAJARES A.; MIRANDA P.; SALAMON, D.; ČÁSTKOVÁ, K. Case study: Reinforcement of 45S5 bioglass robocast scaffolds by HA/PCL nanocomposite coatings. Journal of the Mechanical Behavior of Biomedical Materials, 2017, vol. 75, iss. 07, p. 114-118. ISSN: 1751-6161.
ROLEČEK, J.; SALAMON, D.; CHLUP, Z. Mechanical properties of hybrid composites prepared by ice-templating of alumina. Journal of the European Ceramic Society, 2017, vol. 37, iss. 14, p. 4279-4286. ISSN: 0955-2219.
ROLEČEK, J.; FORAL, Š.; KATOVSKÝ, K.; SALAMON, D. A Feasibility study of using of CeO2 as a surrogate material during investigation of UO2 thermal conductivity enhancement. Advances in Applied Ceramics, 2017, vol. 115, iss. 8, p. 123-131. ISSN: 1743-6753.
KALOUSEK, R.; SPOUSTA, J.; ZLÁMAL, J.; DUB, P.; ŠIKOLA, T.; SHEN, Z.; SALAMON, D.; MACA, K. Rapid heating of zirconia nanoparticle-powder compacts by infrared radiation heat transfer. Journal of the European Ceramic Society, 2017, vol. 37, iss. 3, p. 1067-1072. ISSN: 0955-2219.
2016
PRAJZLER, V.; SALAMON, D.; MACA, K. Rapid sintering of advanced oxide ceramics by conventional heating. In Processing and properties of advanced ceramics. 2016. p. 10-17. ISBN: 978-80-971648-5-0.
SALAMON, D.; KALOUSEK, R.; ZLÁMAL, J.; MACA, K. Role of conduction and convection heat transfer during rapid crack-free sintering of bulk ceramic with low thermal conductivity. Journal of the European Ceramic Society, 2016, vol. 36, iss. 12, p. 2955-2959. ISSN: 0955-2219.
2015
SALAMON, D.; KALOUSEK, R.; MACA, K.; SHEN, Z. Rapid Grain Growth in 3Y-TZP Nanoceramics by Pressure-Assisted and Pressure-Less SPS. Journal of the American Ceramic Society, 2015, vol. 98, iss. 12, p. 3706-3712. ISSN: 0002-7820.
FORAL, Š.; KATOVSKÝ, K.; SALAMON, D.; VARMUŽA, J. Thermal conductivity of composite UO2+SiC fuels under irradiation. In International conference of young scientists and post-graduates - Proceedings of the conference. Užgorod, Ukrajina: Institute of Electron physics, The National Academy of Sciences of Ukraine, 2015. p. 158-159. ISBN: 978-966-2668-95-7.
FORAL, Š.; SALAMON, D.; KATOVSKÝ, K. Vliv aditiv na tepelnou vodivost paliv lehkovodních reaktorů. Bezpečnost jaderné energie. Státní úřad pro jadernou bezpečnost ČR, Úrad jadrového dozoru SR JF DL, 2015, roč. 23, č. 5-6, s. 147-153. ISSN: 1210-7085.
2014
SALAMON, D. Advanced Ceramics for Dentistry Chapter 6 - Advanced Ceramics. In Advanced Ceramics for Dentistry. Amsterodam: Elsevier, 2014. p. 103.ISBN: 978-0-12-394619-5.
SALAMON, D.; TEIXEIRA, S.; DUTCZAK, S.; STAMATIALIS, D. Facile method of building hydroxyapatite 3D scaffolds assembled from porous hollow fibers enabling nutrient delivery. Ceramics International, 2014, vol. 40, iss. 9, p. 14793-14799. ISSN: 0272-8842.
FORAL, Š.; KATOVSKÝ, K.; VARMUŽA, J.; SALAMON, D.; ROLEČEK, J. Influence of silicone carbide on the reactivity of nuclear fuels using cerium dioxide as a surrogate material. In Proceedings on 2014 22nd International Conference on Nuclear Engineering (ICONE22). 2014. s. 1-10. ISBN: 978-0-7918-4594-3.
2012
SALAMON, D.; ERIKSSON, M.; NYGREN, M.; SHEN, Z. Can the use of pulsed direct current induce oscillation in the applied pressure during spark plasma sintering?. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2012, vol. 13, iss. 1-2, p. 015005 (015005-6 p.)ISSN: 1468-6996.
SALAMON, D.; MACA, K.; SHEN, Z. Rapid sintering of crack-free zirconia ceramics by pressure-less spark plasma sintering. SCRIPTA MATERIALIA, 2012, vol. 66, iss. 11, p. 899-902. ISSN: 1359-6462.
2007
SALAMON, D.; SHEN, Z.; ŠAJGALÍK, P. Rapid formation of alpha-sialon during spark plasma sintering: Its origin and implications. Journal of the European Ceramic Society, 2007, vol. 27, iss. 6, p. 2541-2547. ISSN: 0955-2219.
Salamon, D; Eriksson, M; Nygren, M; Shen, Z. Homogeneous TiB2 ceramics achieved by electric current-assisted self-propagating reaction sintering. Journal of the American Ceramic Society, 2007, vol. 90, iss. 10, p. 3303-3306. ISSN: 0002-7820.
Peng, H; Salamon, D; Bill, J; Rixecker, G; Burghard, Z; Aldinger, F; Shen, ZJ. Consolidating and deforming SiC nanoceramics via dynamic grain sliding. Advanced engineering materials, 2007, vol. 9, iss. 4, p. 303-306. ISSN: 1438-1656.
2006
Smrcok, L; Salamon, D; Scholtzova, E; Richardson, JW. Time-of-flight Rietveld neutron structure refinement and quantum chemistry study of Y-alpha-sialon. Journal of the European Ceramic Society, 2006, vol. 26, iss. 16, p. 3925-3931. ISSN: 0955-2219.
2005
Salamon, D; Pritula, O; Sajgalik, P; Rundlof, H. Neutron powder diffraction study of y-sialon with La2O3 or Nd2O3 addition. Journal of the American Ceramic Society, 2005, vol. 88, iss. 12, p. 3542-3544. ISSN: 0002-7820.
KŘESŤAN, J.; ŠAJGALÍK, P.; PÁNEK, Z.; SALAMON, D. Low cost sialon from pyrophyllite with high hardness and good corrosion resistance. In Key Engineering Materials (print). BRANDRAIN 6, CH-8707 ZURICH-UETIKON, SWITZERLAND: TRANS TECH PUBLICATIONS LTD, 2005. p. 312-315. ISSN: 1013-9826.
Salamon, D; Sajgalik, P; Lences, Z; Krest'an, J. The influence of La2O3 and Nd2O3 addition on aspect ratio of Y-alpha-sialon seeds. MATERIALS LETTERS, 2005, vol. 59, iss. 26, p. 3201-3204. ISSN: 0167-577X.
SALAMON, D.; ŠAJGALÍK, P.; LIŠKA, M. Mechanical properties and microstructure of alpha-Sialon based cutting tools. In Key Engineering Materials (print). 2005. p. 250-253. ISSN: 1013-9826.
2001
Hnatko, M ; Sajgalik, P; Lences, Z; Salamon, D; Monteverde, F. Carbon reduction reaction in the Y2O3-SiO2 glass system at high temperature. Journal of the European Ceramic Society, 2001, vol. 21, iss. 16, p. 2797-2801. ISSN: 0955-2219.
*) Citations are generated once every 24 hours.