Course detail

Technology of constructions 2

FAST-NWA033Acad. year: 2025/2026

The subject is a follow-up of Technology of constructions I. and it includes the area of building processes linked with erection of constructions, inner and finishing works. The main part is focused on crafts works with high time and coordination demands. They significantly affect the function, useful value and quality of the construction. The characteristic feature of these processes is their dispersion into more than thirty crafts differing in type. They are an integral part of the construction process and require a very good coordination and control activity. This is not possible without the knowledge of their contents, technology requirements and interrelations.

Language of instruction

Czech

Number of ECTS credits

4

Mode of study

Not applicable.

Guarantor

doc. Ing. Radka Kantová, Ph.D.

Department

Institute of Technology, Mechanisation and Construction Management (TST)

Entry knowledge

Knowledge of the constructional principles of a building. The subject is a follow-up of the subject Technology of constructions I.

Rules for evaluation and completion of the course

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Aims

The goal of the subject is to teach the students to apply individual processes of carcass substructure and superstructure, installation process and finishing work in practice, and to deal with particular problems at individual examples. The subject is a follow-up of the subject Technology of constructions I. and includes introduction to building processes related to the assembly of the building constructions, and further the inner and finishing works. Main part focuses on high time and coordination demands of crafts works.
By mastering the objectives of the Technology of Constructions course II the students acquire principal knowledge of partial technology stages of the building operations process, in particular of some carcass superstructure processes and interior and finishing processes.

Study aids

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Doc. Ing. Vít Motyčka, CSc.. Věžové jeřáby v pozemním stavitelství. CERM Brno, 2007.  (CS)
Ing. Radka Kantová a kolektiv autorů pracoviště TST. Technologie staveb II, Průvodce předmětem TW02 a s ním související vybrané studijní opory předmětů AW51, BW02 a BW04. intranet FAST, zpřístupněné opory pro TW02, 2011.  (CS)
Ing. Radka Kantová. Technologie staveb II – průvodce předmětem TW02. intranet FAST, studijní opora, 2011.  (CS)
Ing. Vít Motyčka a kolektiv. Technologie staveb I, Technologie stavebních procesů, část2, Hrubá vrchní stavba. CERM Brno, 2005. ISBN 80-214-2873-2 (CS)
JARSKÝ, Čeněk a kol.. Technologie staveb II, Příprava a realizace staveb. CERM Brno, 2019. ISBN 978-80-7204-994-3 (CS)
Mgr. Petr Lízal, CSc. a kol.. Technologie stavebních procesů pozemních staveb Hrubá spodní stavba. CERM Brno, 2003. ISBN 80-214-2536-9 (CS)
Prof. Kočí, Ing. Kovářová. Technologie domovních instalací.  (CS)
Prof. Musil, Ing. Tuza. Ateliérová tvorba, stavebně technologické projekty. CERM Brno, 1992. ISBN 80-214-0335-7 (CS)
Prof. Zapletal a kol.. Technológia stavieb, dokončovací práce II .a III..  (SK)

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme NPC-ARS Master's

    specialization ARA , 2 year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

doc. Ing. Radka Kantová, Ph.D.

Syllabus

  • 1. Assembly processes. Principles of production, transportation and storing of semi-products. Assembly of buildings of reinforced concrete semi-products. Readiness of the site for assembly. Assembly procedures, cranes, optimisation of their selection. Quality requirements for assembled structures.
  • 2. Assembly of steel structures. Production of structural elements, principles of haulage and storage. Readiness of the site for assembly, pre-assembly areas. Optimisation of assembly methods and procedures. Requirements for quality and accuracy of assembled structures.
  • 3. Introduction into the sphere of inner and finishing processes, their analysis, demands, technology level. Sequence of individual processes, links, necessary technology breaks.
  • 4. Principles of partitions execution – masonry, made of glass blocks and assembled of segments and skeletal. Readiness of construction, flow-charts, tests, quality control.
  • 5. Installation processes. Establishment of inner sewage system. Water and central heating distributions. Installation of inner gas duct and air handling distributions. Systems, material options, readiness of construction, assembly processes, principles of connecting.
  • 6. Execution of building water, heat, noise, vibration insulations and insulations against chemical impacts. Flow-charts, readiness of constructions, links, quality control, tests.
  • 7. Assemblies of opening fillings – windows, door panels, locksmith product packing, built-in furniture panels etc. Readiness of construction, working procedures, types of anchoring. Quality requirements.
  • 8. Building structure surface treatment – interior plasterwork and external coatings, types, flow-charts, readiness of the background, technology breaks, flatness requirements, quality inspection.
  • 9. Technology of contact warm padding building claddings, systems, flow-charts. Background preparation, principles of execution of thin-coat reinforcement plasters. Quality conditions.
  • 10. Execution of interior and external linings, systems, technology procedures, requirements for construction readiness. Contact and grid linings. Quality requirements, quality inspection method.
  • 11. Establishment of ceiling soffits. Systems, readiness of the base, technology procedures. Time demand. Flatness requirements and their inspection.
  • 12.Laying of floors and paving. Types, material options. Working procedures, requirements for technology breaks. Quality requirements and their inspection.
  • 13. Paintings and wall, timber and steel structure coatings. Types of painting and coating materials, their classification and applicability. Requirements for the base, application method, quality inspection.

Completing of craft works, installation of fittings, fixing technology. Test and inspection reports, necessary inspections for the final building acceptance.

Exercise

26 hod., compulsory

Teacher / Lecturer

doc. Ing. Radka Kantová, Ph.D.

Syllabus

  • 1. Organizational instructions, Individual tasks of solved buildings as for assembly works and finishing works, outline of the link to the preceding subject Technology of constructions I. introduction to the processes of assembly works

Outcome: selection of a building for exercise practice, arrangement of the required constructional drawings, establishment of a template for the following development of Technological Regulations, calculation of the weight of the elements of the assembled building.

  • 2. Processes of the assembly works, selection of tools

Outcome: Technological regulation for the assembly, design of a crane or autocrane, technical documentation of the machines, load verification in load tests, assembly schemas

  • 3. Design of a site plant for an assembled building

Outcome: The drawing of the building site in colours, with the location of the lifting gear, and detailed drawing of stored elements

  • 4. Partitions

Outcome: Technological regulation for the selected partition including the design of scaffolding and tools, plan schema with the details of the different types of partitions in the building layout, details

  • 5. Insulation

Outcome: Technological regulation for the selected insulation assembly including a design of possible tools, cross-section of the assembly, high-risk details, especially connection or anchorage of the insulating material

  • 6. Educational trip to a selected construction to have a chance to watch the assembly works and the process of lifting gear.
  • 7. Check of the outcomes from the required parts, the principles of assembly of opening filling
  • 8. Plastering – Part I.

Outcome: Technological regulation for application of a selected plater emphasizing the selection of site supply (hand or machine application), drawings: plan, section of one floor with representation of the plastering process, scaffolding placement, defining of the work progress

  • 9. Plastering – Part II.

Outcome: progress schedule for plastering, sequenced by rooms, with a division of the first and second height of plastering, ceiling and specifying the technological breaks

  • 10. Floors – Part I.

Outcome: Drawing – plan with marking of the types of surface layers in each room, suitable selection of material

  • 11. Floors – Part II.

Outcome: Technological regulation for selected types of flooring including a design of possible tools, cross-section of the flooring composition, high-risk details

  • 12. Final consultation, educational trip to a selected construction to have a look at the technology of the finishing works
  • 13. Credit test