Project detail

Modelování procesů v oblasti termofluidní mechaniky a techniky prostředí

Duration: 1.3.2023 — 28.2.2026

Funding resources

Vysoké učení technické v Brně - Vnitřní projekty VUT

On the project

Projekt je zaměřen na výzkum řady problémů v oblasti termofluidní mechaniky a techniky prostředí se zaměřením na snižování emisí a energetické náročnosti.

Mark

FSI-S-23-8192

Default language

Czech

People responsible

Katolický Jaroslav, doc. Ing., Ph.D. - principal person responsible
Březina Michal, Ing. - fellow researcher
Cejpek Ondřej, Ing., Ph.D. - fellow researcher
Fišer Jan, doc. Ing. Bc., Ph.D. - fellow researcher
Hájek Ondřej, Ing., Ph.D. - fellow researcher
Hejčík Jiří, Ing., Ph.D. - fellow researcher
Charvát Pavel, doc. Ing., Ph.D. - fellow researcher
Jedelský Jan, prof. Ing., Ph.D. - fellow researcher
Jícha Miroslav, prof. Ing., CSc. - fellow researcher
Klimeš Lubomír, doc. Ing., Ph.D. - fellow researcher
Lízal František, doc. Ing., Ph.D. - fellow researcher
Mišík Ondrej, Ing., Ph.D. - fellow researcher
Prinz František, Ing., Ph.D. - fellow researcher
Rapta Patrik, Ing. - fellow researcher
Řehák Kopečková Barbora, Ing., Ph.D. - fellow researcher
Šálený Vratislav, Ing., Ph.D. - fellow researcher
Šíp Jan, Ing., Ph.D. - fellow researcher
Zálešák Martin, Ing., Ph.D. - fellow researcher

Units

Energy Institute
- responsible department (23.4.2024 - not assigned)
Energy Institute
- internal (1.1.2023 - 31.12.2025)
Faculty of Mechanical Engineering
- beneficiary (1.1.2023 - 31.12.2025)

Results

Ondrej Cejpek Milan Maly Miloslav Belka Erika Rácz Jiri Hajek Ondrej Hajek Jan Jedelsky. Spray–gas counterflow interactions in an absorber column. SEPARATION AND PURIFICATION TECHNOLOGY, 2026, vol. 382, no. 4, 16 p.
Detail

JEDELSKÝ, J.; VAN DER LAAN, S.; CEJPEK, O.; MALÝ, M.; KADLEC, M.; SMILEK, J.; STRMISKA, P.; HÁJEK, O.; SACHSENHEIMER, D. Effect of shear-thinning on pressure-swirl atomization. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2026, vol. 255, no. 2.2026, p. 1-14.
Detail

CEJPEK, O.; MALÝ, M.; HÁJEK, J.; HÁJEK, O.; BĚLKA, M.; JEDELSKÝ, J. Comparison of droplet dynamics in low-speed gaseous counter flow: Pressure-swirl and twin-fluid spra. Shanghai: ICLASS 2024, 2024. 10 p.
Detail

HÁJEK, O.; MALÝ, M.; CEJPEK, O.; BLATKIEWICZ, M.; MAJDZIK, M.; JÍCHA, M. Laser Doppler Velocimetry Analysis of Gas Flow Impact on Droplet Movement in a Rotating Packed Bed. . Shanghai: ICLASS, 2024. no. , p. 1-9.
Detail

ZÁLEŠÁK, M.; KLIMEŠ, L.; CHARVÁT, P.; PECH, O.; RAPTA, P. An Effective Thermal Conductivity-based Approach for Modelling of Convective Heat Transfer in a Rectangular Cavity Filled with PCM. Chemical Engineering Transactions, 2023, vol. 103, no. 1, p. 715-720. ISSN: 2283-9216.
Detail

JEDELSKÝ, J.; LÍZAL, F.; JÍCHA, M. Time-resolved characteristics of oscillatory particle-laden air flow in a realistic human airway model. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 2024, vol. 105, no. May-June, p. 219-237. ISSN: 0997-7546.
Detail

HÁJEK, O.; MALÝ, M.; CEJPEK, O.; BLATKIEWICZ, M.; JEDELSKÝ, J.; HÁJEK, J.; MAJDZIK, M.; JASKULSKI, M.; JÍCHA, M. Analysis of Droplet Motion in Cavity Zone of Rotating Packed Bed. SEPARATION AND PURIFICATION TECHNOLOGY, 2025, vol. 357, no. B, 12 p. ISSN: 1873-3794.
Detail

ZÁLEŠÁK, M.; KLIMEŠ, L.; CHARVÁT, P.; ŠPILÁČEK, M. Complex 3D-Printed Heat Transfer Surfaces: An Assessment and Comparison of Tools for Implicit Geometry Modelling. Chemical Engineering Transactions, 2024, vol. 94, no. 1, p. 229-234. ISSN: 2283-9216.
Detail

MIŠÍK, O.; SZABOVÁ, J.; CEJPEK, O.; MALÝ, M.; JUGL, A.; BĚLKA, M.; MRAVEC, F.; LÍZAL, F. Nebulization and In Vitro Upper Airway Deposition of Liposomal Carrier Systems. MOLECULAR PHARMACEUTICS, 2024, vol. 21, no. 4, p. 1848-1860. ISSN: 1543-8384.
Detail

PRINZ, F.; POKORNÝ, J.; ELCNER, J.; LÍZAL, F.; MIŠÍK, O.; MALÝ, M.; BĚLKA, M.;HAFEN N; KUMMERLÄNDER A.; KRAUSE M.; JEDELSKÝ, J.; JÍCHA, M.;. Comprehensive experimental and numerical validation of Lattice Boltzmann fluid flow and particle simulations in a child respiratory tract. Computers in Biology and Medicine, 2024, vol. 170, no. 107994, 17 p. ISSN: 0010-4825.
Detail

VANKESWARAM, S.; MALÝ, M.; JEDELSKÝ, J. Understanding the fuel spray characteristics in the near-nozzle region for a pressure swirl atomizer. JOURNAL OF AEROSOL SCIENCE, 2024, vol. 1, no. 178, p. 1-17. ISSN: 0021-8502.
Detail

RAPTA, P.; HEJČÍK, J. Thermocouple influence on Heat Transfer Coefficient measurement. International Institute of Refrigeration, 2024. 8 p.
Detail

RÁCZ, E.; MALÝ, M.; CEJPEK, O.; JEDELSKÝ, J.; JÓZSA, V. Statistical analysis of rotary atomization by phase Doppler anemometry. PHYSICS OF FLUIDS, 2024, vol. 36, no. 5, 19 p. ISSN: 1070-6631.
Detail

JEDELSKÝ, J.; VAN DER LAAN, S.; CEJPEK, O.; MALÝ, M.; KADLEC, M.; SMILEK, J. Atomization of shear-thinning liquids using pressure swirl atomizers. Shanghai: ICLASS 2024, 2024. p. 1-12.
Detail

MALÝ, M.; CEJPEK, O.; LINDOVSKÝ, J.; HÁJEK, J.; HÁJEK, O.; BĚLKA, M.; JEDELSKÝ, J. Importance of atomizer choice for CO2 capture in spray columns. Fuel, 2025, vol. 385, no. 1, p. 1-10. ISSN: 1873-7153.
Detail

ŘEHÁK KOPEČKOVÁ, B.; KOPECKÝ, D.; POKORNÝ, J.; LUNEROVÁ, K.; MAŠÍN, M. Validita odhadu metabolické aktivity pomocí chytrých hodinek. Sborník článků Hazmat Protect 2024, Proceedings of Hazmat Protect 2024. Příbram, Milín Kamenná: SÚJCHBO, v.v.i., 2024. s. 95-110. ISBN: 978-80-909301-2-4.
Detail

FIŠER, J.; POKORNÝ, J.; PECH, O.; LUNEROVÁ, K. THE EFFECT OF ACTIVELY VENTILATED PROTECTIVE EQUIPMENT FOR MEDICAL STAFF ON HEAT TRANSFER FROM THE HUMAN BODY. HAZMAT PROTECT 2024 - 5th Scientific Conference on CBRN Protection. 1. Příbram, Milín Kamenná: SÚJCHBO, v.v.i., 2024. p. 22-22. ISBN: 978-80-909301-0-0.
Detail

ZÁLEŠÁK, M.; CHARVÁT, P.; KLIMEŠ, L.; KŮDELA, J.; PECH, O. Inverse identification of thermal behaviour of a paraffin-based phase change material in complete and partial phase change cycles. Thermal Science and Engineering Progress, 2024, vol. 51, no. 1, 18 p. ISSN: 2451-9049.
Detail

ZÁLEŠÁK, M.; CHARVÁT, P.; KLIMEŠ, L.; PECH, O.; RAPTA, P. Thermal behavior of PCMs during phase transitions with phase change hysteresis: Experimental setup development and problems of model validation. In ASME 2023 International Mechanical Engineering Congress and Exposition. New Orleans, Louisiana, USA: ASME, 2024. 6 p. ISBN: 978-0-7918-8770-7.
Detail

LUNEROVÁ, K.; ŘEHÁK KOPEČKOVÁ, B.; POKORNÝ, J.; MAŠÍN, M.; KAISER, D.; FIALOVÁ, V.; FIŠER, J. Applicability of Human Thermophysiological Model for Prediction of Thermal Strain in PPE. Applied Sciences-Basel, 2023, vol. 13, no. 12, p. 1-22. ISSN: 2076-3417.
Detail


Detail

PRINZ, F.; LÍZAL, F.; CEJPEK, O.; HÁJEK, O.; JÍCHA, M. On the transport of fibrous particles in the respiratory tract. Tayouan, Tchaj-wan: The 34th International Symposium on Transport Phenomena, 2024. 6 p.
Detail

HÁJEK, O.; BOUCHAL, P.; MALÝ, M.; ZAWADSKI, D.; BLATKIEWICZ, M.; JÍCHA, M. Comparative analysis of droplet characteristics generated in the outer cavity of RPB for two packings. Jeju: Ilass Asia 2023, 2023. p. 207-208.
Detail

MISIK, O.; PRINZ, F.; ELCNER, J.; CABALKA, M.; BELKA, M.; LÍZAL, F. Influence of nebulizer pressure drop on breathing profiles and aerosol deposition in human airways. JOURNAL OF AEROSOL SCIENCE, 2025, vol. 188, no. August 2025, 18 p.
Detail