Publication results

• 2025

  DYMORA, P.; MAZUREK, M.; ŁYCZKO, K.; HADAŠ, Z. Analysis of the time slot length impact of selected data link layer protocols on energy resource consumption in wireless sensor networks. Advances in Science and Technology-Research Journal, 2025, vol. 19, no. 2, p. 114-126. ISSN: 2299-8624.
  Detail

• 2024

  SOSNA, P.; HADAŠ, Z. DEVELOPMENT AND VERIFICATION OF NOVEL DUAL PLUNGER HYBRID KINETIC ENERGY HARVESTER. Engineering Mechanics .... 2024. p. 286-289. ISSN: 1805-8256.
  Detail

  Chun-Ying Lee, Chung-Yin Liu, Zdenek Hadas, Ivo Stachiv. Design of FDM fabricated poly-lactic acid parts with forced-air cooling speed as the new control parameter to tune its shape memory effect. Smart Materials and Structures, 2024, vol. 33, no. 8, 9 p. ISSN: 0964-1726.
  Detail

  RAIF, L.; PLÁŠEK, O.; KOHOUT, M.; SALAJKA, V.; PODROUŽEK, J.; VÁGNER, J.; HÁBA, A.; NAVRÁTIL, P.; VYHLÍDAL, M.; VUKUŠIČ, I.; KRČ, R.; HADAŠ, Z. Smart Autonomous Diagnostics of Switches and Crossings. In PROCEEDINGS OF THE SIXTH INTERNATIONAL CONFERENCE ON RAILWAY TECHNOLOGY: RESEARCH, DEVELOPMENT AND MAINTENANCE. Civil-Comp Conferences. Praha: Civil-Comp Limited 2023, 2024. p. 1-13. ISSN: 2753-3239.
  Detail

  HRSTKA, M.; BAJER, J.; HADAŠ, Z.; KHODAEI, Z.; ALIABADI, F.; KOTOUL, M. Modelling of leading edge morphing by using geometrically exact beam theory. In Engineering Mechanics 2024. Engineering Mechanics. 1. Milovy: Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, 2024. no. 1, p. 134-137. ISBN: 978-80-214-6235-9. ISSN: 1805-8248.
  Detail

  Jerzy Margielewicz, Damian Gąska, Tomasz Haniszewski, Grzegorz Litak, Piotr Wolszczak, Marek Borowiec, Petr Sosna, Oldřich Ševeček, Ondřej Rubeš, Zdeněk Hadaš. Vibration energy harvesting system with cyclically time-varying potential barrier. APPLIED ENERGY, 2024, vol. 367, no. 123384, 28 p. ISSN: 0306-2619.
  Detail

  Jan Bajer; Miroslav Hrstka; Zahra Sharif Khodaei; M.H. Aliabadi; Zdenek Hadas. Geometry Optimization of a Highly Flexible Gradient Metamaterial Structure Using a Differential Evolution Algorithm. In 2024 21st International Conference on Mechatronics - Mechatronika (ME). 21. Brno, Czech Republic: IEEE, 2024. p. 186-191. ISBN: 979-8-3503-9490-0.
  Detail

  SOSNA, P.; HADAŠ, Z. Power Optimization of Hybrid Energy Harvestering from Mechanical Vibrations Using Piezoelectric and Electromagnetic Mechanisms. In 21st Mechatronika 2024 : Proceedings of the 21st International Conference on Mechatronics - Mechatronika (ME). 21. Brno, Czech Republic: IEEE, 2024. p. 205-209. ISBN: 979-8-3503-9490-0.
  Detail

  Jui-Chien Tu; Yun-Luang Wang; Jia-Chang Wang; Filip Ksica; Zdenek Hadas. Development of Integrated 3D Printing and Automated Embedding System. In 21st Mechatronika 2024 : Proceedings of the 21st International Conference on Mechatronics - Mechatronika (ME). 21. Brno, Czech Republic: IEEE, 2024. p. 367-372. ISBN: 979-8-3503-9490-0.
  Detail

  SKŘIVÁNEK, V.; RUBEŠ, O.; HADAŠ, Z. Modal Properties Tuning Analysis of Dynamic System with Piezoelectric Components. In 2024 21st International Conference on Mechatronics - Mechatronika (ME). 21. Brno, Czech Republic: IEEE, 2024. 5 p. ISBN: 979-8-3503-9490-0.
  Detail

  Slabý V., Bajer J., Hadaš Z. QCONCEPT OF SMART CYMBAL STRUCTURE FOR STRUCTURAL HEALTH MONITORING APPLICATIONS. ENGINEERING MECHANICS 2024. Engineering Mechanics .... 30. 2024. p. 262-265. ISBN: 978-80-214-6235-9. ISSN: 1805-8256.
  Detail

• 2023

  SOSNA, P.; RUBEŠ, O.; HADAŠ, Z. Verification and analysis of advanced tuneable nonlinear vibration energy harvester. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2023, vol. 189, no. 110096, 10 p. ISSN: 0888-3270.
  Detail

  BAJER, J.; KŠICA, F.; MARCIÁN, P.; HRSTKA, M.; NAVRÁTIL, J.; HADAŠ, Z. Concept of Autonomous Self-Sensing Metamaterial Structures for Future Aircraft. In 2023 IEEE 10th International Workshop on Metrology for AeroSpace (MetroAeroSpace). Milan, Italy: IEEE, 2023. p. 424-429. ISBN: 978-1-6654-5690-6.
  Detail

  HADRABA, P.; WANG, J.; HADAŠ, Z. Effects of nonlinear behaviour of linear ball guideway on chatter frequency of lathe machine tool. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, vol. 126, no. 1-2, p. 225-240. ISSN: 0268-3768.
  Detail

• 2022

  KRČ, R.; AMBUR, R.; HADAŠ, Z.; OLABY, O.; VUKUŠIČ, I.; PLÁŠEK, O.; ENTEZAMI, M.; DIXON, R. Condition monitoring and trend analysis of railway turnouts based on in-situ accelerometer measurements. PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON RAILWAY TECHNOLOGY: RESEARCH, DEVELOPMENT AND MAINTENANCE. Edinburgh, United Kingdom: Civil-Comp Press, 2022. 10 p.
  Detail

  HADAŠ, Z.; RUBEŠ, O.; KŠICA, F.; CHALUPA, J. Kinetic Electromagnetic Energy Harvester for Railway Applications-Development and Test with Wireless Sensor. SENSORS, 2022, vol. 22, no. 3, p. 1-19. ISSN: 1424-8220.
  Detail

  KŠICA, F.; RUBEŠ, O.; KOVÁŘ, J.; CHALUPA, J.; HADAŠ, Z. Smart Sensing System for Railway Monitoring. In Proceedings of the 2022 20th International Conference on Mechatronics - Mechatronika (ME). Pilsen: IEEE, 2022. 6 p. ISBN: 978-1-6654-1040-3.
  Detail

  RUBEŠ, O.; BEŇO, M.; SOSNA, P.; HADAŠ, Z. Electromagnetic Trackside Vibration Energy Harvester with Cantilever Beams Spring. In Proceedings of the 2022 20th International Conference on Mechatronics - Mechatronika (ME). Pilsen: IEEE, 2022. 5 p. ISBN: 978-1-6654-1040-3.
  Detail

  HADAŠ, Z.; SLABÝ, V.; BAJER, J.; FILKOVÁ, A.; KŠICA, F.; MARCIÁN, P. Design Concept and Test Results of Electromechanical Metamaterial Structure for Sensing and Energy Harvesting Applications. In Proceedings of the 2022 20th International Conference on Mechatronics - Mechatronika (ME). Pilsen: IEEE, 2022. 6 p. ISBN: 978-1-6654-1040-3.
  Detail

  HADAŠ, Z.; RUBEŠ, O.; KŠICA, F.; MAJER, Z.; MONCMAN, M.; CHALUPA, J. Passing Train as Source of Energy for Autonomous LoRa Monitoring System. In Montpellier: Elsevier, 2022. 8 p.
  Detail

  ŠEVEČEK, O.; KŠICA, F.; RUBEŠ, O.; MACHŮ, Z.; BOLCEK, J.; HADAŠ, Z. Analysis of piezoelectric skin on vibrating structure for energy harvesting and structural health monitoring applications. European Physical Journal-Special Topics, 2022, vol. 2022, no. 1, p. 1-8. ISSN: 1951-6355.
  Detail

  CARANDELL, M., TICHY, J., SMILEK, J., TOMA, D.M., GASULLA, M., DEL RÍO, J., HADAŠ, Z. Electromagnetic rolling mass wave energy harvester for oceanic drifter applications. European Physical Journal-Special Topics, 2022, no. 1, p. 1475-1484. ISSN: 1951-6355.
  Detail

  SOSNA, P.; HADAŠ, Z. Verification of kinetic piezoelectric energy harvesting model with periodic and chaotic responses. In Proceedings of the 2022 20th International Conference on Mechatronics - Mechatronika (ME). Pilsen: IEEE, 2022. 7 p. ISBN: 978-1-6654-1040-3.
  Detail

  TOFEL, P.; ČÁSTKOVÁ, K.; ŘÍHA, D.; SOBOLA, D.; PAPEŽ, N.; KAŠTYL, J.; TALU, S.; HADAŠ, Z. Triboelectric Response of Electrospun Stratified PVDF and PA Structures. Nanomaterials, 2022, vol. 12, no. 3, p. 1-14. ISSN: 2079-4991.
  Detail

  HADRABA, P.; WANG, J.; LIN, H.; HADAŠ, Z. THEORETICAL STUDY OF NONLINEAR CHATTER STABILITY ANALYSIS BASED ON SYNTHESIS OF LINEARIZATIONS IN OPERATING POINTS FOR DIFFERENT TURNING CONDITIONS. MM Science Journal, 2022, vol. 2022, no. October, p. 5846-5853. ISSN: 1803-1269.
  Detail

• 2021

  MACHŮ, Z.; RUBEŠ, O.; ŠEVEČEK, O.; HADAŠ, Z. Experimentally Verified Analytical Models of Piezoelectric Cantilevers in Different Design Configurations. SENSORS, 2021, vol. 21, no. 20, p. 6759-6759. ISSN: 1424-8220.
  Detail

  RUBEŠ, O.; CHALUPA, J.; KŠICA, F.; HADAŠ, Z. Development and experimental validation of self-powered wireless vibration sensor node using vibration energy harvester. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2021, vol. 160, no. 107890, p. 1-15. ISSN: 0888-3270.
  Detail

  MACHŮ, Z.; KRATOCHVÍLOVÁ, M.; KŠICA, F.; PODROUŽEK, J.; HADAŠ, Z. SENSING RAIL SYSTEM WITH PIEZOELECTRIC ELEMENTS. MM Science Journal, 2021, no. March 2021, p. 4230-4237. ISSN: 1805-0476.
  Detail

• 2020

  KASPAR, P.; SOBOLA, D.; ČÁSTKOVÁ, K.; KNÁPEK, A.; BURDA, D.; ORUDZHEV, F.; DALLAEV, R.; TOFEL, P.; TRČKA, T.; GRMELA, L.; HADAŠ, Z. Characterization of Polyvinylidene Fluoride (PVDF) Electrospun Fibers Doped by Carbon Flakes. Polymers, 2020, vol. 12, no. 12, p. 2766-1 (2766-15 p.)ISSN: 2073-4360.
  Detail

  HADAŠ, Z.; MARCIÁN, P.; RUBEŠ, O.; HRSTKA, M. CONCEPT OF METAMATERIAL WITH PIEZOELECTRIC ELEMENTS FOR CYBER-PHYSICAL SYSTEM APPLICATIONS. In ENGINEERING MECHANICS 2020. Engineering Mechanics .... BRNO: BRNO UNIV TECHNOL, FAC MECHANICAL ENGINEERING, 2020. no. 2020, p. 174-177. ISBN: 978-80-214-5896-3. ISSN: 1805-8256.
  Detail

  HADRABA, P.; SVOBODOVÁ, M.; LIN, H.; HADAŠ, Z. TIME-DOMAIN SIMULATIONS OF GROOVING PROCESS WITH STIFFNESS UNCERTANTITIES. In ENGINEERING MECHANICS 2020. Engineering Mechanics .... BRNO: BRNO UNIV TECHNOL, FAC MECHANICAL ENGINEERING, 2020. no. 2020, p. 178-181. ISBN: 978-80-214-5896-3. ISSN: 1805-8256.
  Detail

  MAJER, Z.; ŠEVEČEK, O.; ŠTEGNEROVÁ, K.; RUBEŠ, O.; TOFEL, P.; HADAŠ, Z. Analysis of maximal operation amplitudes of piezoelectric vibration energy harvesters. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). 1. Švýcarsko: Trans Tech Publications Ltd, 2020. no. 827, p. 324-329. ISBN: 9783035715866. ISSN: 1013-9826.
  Detail

  HADAŠ, Z.; HLINKA, J.; JANÁK, L.; KŠICA, F.; RUBEŠ, O.; ŠEVEČEK, O.; TOFEL, P. Energy Harvesting Technologies for Structural Health Monitoring of Airplane Components-A Review. SENSORS, 2020, vol. 20, no. 22, p. 1-57. ISSN: 1424-8220.
  Detail

  RUBEŠ, O.; MACHŮ, Z.; ŠEVEČEK, O.; HADAŠ, Z. Crack Protective Layered Architecture of Lead-Free Piezoelectric Energy Harvester in Bistable Configuration. SENSORS, 2020, vol. 20, no. 20, p. 1-18. ISSN: 1424-8220.
  Detail

  MACHŮ, Z.; ŠEVEČEK, O.; HADAŠ, Z.; KOTOUL, M. Modeling of electromechanical response and fracture resistance of multilayer piezoelectric energy harvester with residual stresses. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2020, vol. 31, no. 19, p. 2261-2287. ISSN: 1530-8138.
  Detail

  HADAŠ, Z.; RUBEŠ, O.; TOFEL, P.; MACHŮ, Z.; ŘÍHA, D.; ŠEVEČEK, O.; KAŠTYL, J.; SOBOLA, D.; ČÁSTKOVÁ, K. Piezoelectric PVDF Elements and Systems for Mechanical Engineering Applications. In 2020 19th International Conference on Mechatronics - Mechatronika (ME). Prague, Czech Republic: Institute of Electrical and Electronics Engineers Inc., 2020. p. 1-8. ISBN: 978-1-7281-5602-6.
  Detail

• 2019

  SMILEK, J.; HADAŠ, Z.; VETIŠKA, J.; BEEBY, S. Rolling mass energy harvester for very low frequency of input vibrations. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2019, no. 125, p. 215-228. ISSN: 0888-3270.
  Detail

  MACHŮ, Z.; MAJER, Z.; HADAŠ, Z.; ŠEVEČEK, O. Crack propagation analysis in multilayer piezoelectric energy harvester. In 9th International Conference on Materials Structure and Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. 1. Brno: Elsevier B.V., 2019. p. 535-540. ISBN: 9781713807575. ISSN: 2452-3216.
  Detail

  ULIANOV, C.; HADAŠ, Z.; HYDE, P.; SMILEK, J. Novel Energy Harvesting Solutions for Powering Trackside Electronic Equipment. In Sustainable Rail Transport. Cham: Springer, 2019. p. 229-255. ISBN: 978-3-030-19519-9.
  Detail

  RUBEŠ, O.; BRABLC, M.; HADAŠ, Z. Nonlinear vibration energy harvester: Design and oscillating stability analyses. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2019, no. 125, p. 170-184. ISSN: 0888-3270.
  Detail

  HADAŠ, Z.; PINČEK, L. Electromagnetic rolling mass energy harvesting device for low frequency excitation. In Mechatronics 2019: Recent Advances Towards Industry 4.0. Advances in Intelligent Systems and Computing. Springer Verlag, 2019. p. 316-323. ISBN: 978-3-030-29992-7. ISSN: 2194-5357.
  Detail

  HADAŠ, Z.; KŠICA, F.; RUBEŠ, O. Piezoceramic patches for energy harvesting and sensing purposes. European Physical Journal-Special Topics, 2019, vol. 228, no. 7, p. 1589-1604. ISSN: 1951-6355.
  Detail

  KŠICA, F.; HADAŠ, Z.; HLINKA, J. Integration and test of piezocomposite sensors for structure health monitoring in aerospace. MEASUREMENT, 2019, vol. 147, no. 106861, p. 1-10. ISSN: 0263-2241.
  Detail

  TOFEL, P.; MACHŮ, Z.; CHLUP, Z.; HADRABA, H.; DRDLÍK, D.; ŠEVEČEK, O.; MAJER, Z.; HOLCMAN, V.; HADAŠ, Z. Novel layered architecture based on Al2O3/ZrO2/BaTiO3 for SMART piezoceramic electromechanical converters. European Physical Journal-Special Topics, 2019, vol. 228, no. 7, p. 1575-1588. ISSN: 1951-6355.
  Detail

  KŠICA, F.; HADAŠ, Z.; RUBEŠ, O.; BĚHAL, J. Homogenized model of piezoelectric composite structure for sensing purposes. In Mechatronics 2019: Recent Advances Towards Industry 4.0. Warsaw: Springer Verlag, 2019. p. 358-365. ISBN: 978-3-030-29993-4.
  Detail

  HADRABA, P.; HADAŠ, Z. Time-Domain Regenerative Chatter Analysis of Non-linear Stiffness System. In Advances in intelligent systems and computing. Advances in Intelligent Systems and Computing. Springer Verlag, 2019. p. 3-10. ISBN: 978-3-030-29992-7. ISSN: 2194-5357.
  Detail

• 2018

  MACHŮ, Z.; MAJER, Z.; ŠEVEČEK, O.; ŠTEGNEROVÁ, K.; HADAŠ, Z. Electro-mechanical analysis of a multilayer piezoelectric cantilever energy harvester upon harmonic vibrations. In MATEC Web of Conferences. MATEC web of conferences. 210. EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
  Detail

  RUBEŠ, O.; BRABLC, M.; HADAŠ, Z. Verified nonlinear model of piezoelectric energy harvester. In The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV). MATEC web of conferences. 211. Lisbon, Portugal: EDP Sciences, 2018. no. 211, p. 1-6. ISSN: 2261-236X.
  Detail

  RUBEŠ, O.; TOFEL, P.; MACKŮ, R.; ŠKARVADA, P.; KŠICA, F.; HADAŠ, Z. Piezoelectric Micro-fiber Composite Structure for Sensing and Energy Harvesting Applications. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno: Brno University of Technolgy, 2018, 2018. p. 344-349. ISBN: 978-80-214-5543-6.
  Detail

  JANÁK, L.; HADAŠ, Z. Feasibility Study of Micro Thermoelectric Power Supply for Aircraft Sensor Node. In 2018 18th International Conference on Mechatronics - Mechatronika (ME). Brno: Brno University of Technology, 2018. p. 1-5. ISBN: 978-80-214-5542-9.
  Detail

  HADRABA, P.; HADAŠ, Z. Dynamic Analysis of Multispindle Lathe. In Mechatronics 2017 Recent Technological and Scientific Advances. Advances in Intelligent Systems and Computing. 1. Brno: Springer International Publishing, 2018. p. 321-329. ISBN: 978-3-319-65959-6. ISSN: 2194-5365.
  Detail

  SMILEK, J.; HADAŠ, Z. Experimental evaluation of Tusi couple based energy harvester for scavenging power from human motion. In The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV). MATEC web of conferences. 211. Lisbon, Portugal: EDP Sciences, 2018. no. 211, p. 1-6. ISSN: 2261-236X.
  Detail

  KŠICA, F.; HADAŠ, Z.; HLINKA, J. Application of piezoelectric sensors for structural health monitoring in aerospace. In 2018 5th IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace) Proceedings. Rome, Italy: Institute of Electrical and Electronics Engineers Inc., 2018. p. 596-601. ISBN: 978-1-5386-2473-9.
  Detail

  BAI, Y.; TOFEL, P.; HADAŠ, Z.; SMILEK, J.; LOŠÁK, P.; ŠKARVADA, P.; MACKŮ, R. Investigation of a cantilever structured piezoelectric energy harvester used for wearable devices with random vibration input. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, vol. 106, no. 106, p. 303-318. ISSN: 0888-3270.
  Detail

  HADAŠ, Z.; SMILEK, J.; RUBEŠ, O. Energy harvesting from passing train as source of energy for autonomous trackside objects. In The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV). MATEC web of conferences. 211. Lisbon, Portugal: EDP Sciences, 2018. no. 211, p. 1-6. ISSN: 2261-236X.
  Detail

  KŠICA, F.; HADAŠ, Z. Prediction of position-dependent stability lobes based on reduced virtual model. In 14th International Conference on Vibration Engineering and Technology of Machinery, VETOMAC 2018 Proceedings. MATEC web of conferences. Lisbon, Portugal: EDP Sciences, 2018. no. 211, p. 1-6. ISSN: 2261-236X.
  Detail

  HADAŠ, Z.; JANÁK, L.; SMILEK, J. Virtual prototypes of energy harvesting systems for industrial applications. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, vol. 110, no. 1, p. 152-164. ISSN: 0888-3270.
  Detail

  RUBEŠ, O.; HADAŠ, Z. Design and Simulation of Bistable Piezoceramic Cantilever for Energy Harvesting from Slow Swinging Movement. In 2018 IEEE 18th International Power Electronics and Motion Control Conference (PEMC). Budapest, Hungary: IEEE, 2018. p. 664-668. ISBN: 978-1-5386-4198-9.
  Detail

  HADAŠ, Z.; SMILEK, J. Efficiency of vibration energy harvesting systems. In Energy Harvesting for Wireless Sensor Networks Technology, Components and System Design. Berlin/Munich/Boston: Walter de Gruyter GmbH, 2018. p. 45-64. ISBN: 9783110445053.
  Detail

  HADRABA, P.; HADAŠ, Z. Multi Body Vibration Analysis of 3 Axis Slide for Mass Damper Design. In Engineering Mechynics 2018. Praha: Institute of Termomechanics AS, 2018. p. 281-284. ISBN: 978-80-86246-88-8.
  Detail

  MACHŮ, Z.; ŠEVEČEK, O.; MAJER, Z.; HADAŠ, Z.; KOTOUL, M. Optimization of the electro-mechanical response of the multilayer piezoelectric energy harvester. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno: Brno University of Technolgy, 2018, 2018. p. 143-148. ISBN: 978-80-214-5543-6.
  Detail

  HADRABA, P.; HADAŠ, Z. Virtual Twin of The Multi-spindle Lathe for the Chatter Time-domain Analysis. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). Brno: Vysoké učení technické v Brně, 2018. p. 35-40. ISBN: 978-80-214-5543-6.
  Detail

• 2017

  SMILEK, J.; HADAŠ, Z. Coil Optimization for Linear Electromagnetic Energy Harvesters with Non-uniform Magnetic Field. In Mechatronics 2017. Advances in Intelligent Systems and Computing. Brno: Springer, 2017. p. 735-742. ISBN: 9783319659596. ISSN: 2194-5357.
  Detail

  HADAŠ, Z.; SMILEK, J.; RUBEŠ, O. Analyses of electromagnetic and piezoelectric systems for efficient vibration energy harvesting. In Proceedings of SPIE - The International Society for Optical Engineering. Proceedings of SPIE. 10246. Barcelona: SPIE, 2017. p. 1024619-1 (1024619-8 p.)ISBN: 9781510609938. ISSN: 0277-786X.
  Detail

  SMILEK, J.; JANÁK, L.; RUBEŠ, O.; HADAŠ, Z. Smart Skins for Structural Health Monitoring in Aerospace Applications. In Proceedings of the EASN Association Conference - 7th EASN International Conference. 7th EASN International Conference Proceedings. European Aeronautics Science Network, 2017. p. 59-65. ISSN: 2523-5052.
  Detail

  KŠICA, F.; VETIŠKA, J.; HADAŠ, Z. Methodology for predicting dynamic behaviour of machine tools based on a virtual model. In Engineering Mechanics 2017. Engineering Mechanics. 1. Svratka: Brno University of Technology, Faculty of Mechanical Engineering, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2017. p. 534-537. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
  Detail

  JANÁK, L.; ANČÍK, Z.; HADAŠ, Z. THERMOELECTRIC GENERATORS FOR AEROSPACE APPLICATIONS: DEVELOPMENT EXPERIENCE AND FUTURE CHALLENGES. In Proceedings of the EASN Association Conference - 7th EASN International Conference. 7th EASN International Conference Proceedings. European Aeronautics Science Network, 2017. p. 898-905. ISSN: 2523-5052.
  Detail

  SMILEK, J.; HADAŠ, Z. Improving power output of inertial energy harvesters by employing principal component analysis of input acceleration. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, vol. 85, no. 1, p. 801-808. ISSN: 0888-3270.
  Detail

  RUBEŠ, O.; HADAŠ, Z. Designing, Modelling and Testing of Vibration Energy Harvester with Nonlinear Stiffness. In Proceedings of SPIE - The International Society for Optical Engineering. Proceedings of SPIE. 10246. Barcelona: SPIE, 2017. p. 102460W-1 (102460W-9 p.)ISBN: 9781510609938. ISSN: 0277-786X.
  Detail

  KŠICA, F.; HADAŠ, Z. Position-Dependent Response Simulation of Machine Tool Using State-Space Models. MM Science Journal, 2017, vol. December, no. 1, p. 2120-2127. ISSN: 1803-1269.
  Detail

• 2016

  SMILEK, J.; JANÁK, L.; HADAŠ, Z. Modular Multidisciplinary Models for Prototyping Energy Harvesting Products. In Recent Global Research and Education: Technological Challenges. Advances in Intelligent Systems and Computing. Berlín: Springer, 2016. p. 395-401. ISBN: 978-3-319-46489-3. ISSN: 2194-5357.
  Detail

  ŽÁK, J.; HADAŠ, Z.; DUŠEK, D.; PEKÁREK, J.; SVATOŠ, V.; JANÁK, L.; PRÁŠEK, J.; Hubálek, J. The Charge Push-Through Electronics Design for Fully Implantable Artificial Cochlea Powered by Energy Harvesting Technologies. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2016, vol. 22, no. 7, p. 1709-1719. ISSN: 0946-7076.
  Detail

  ŽÁK, J.; HUBÁLEK, J.; PRÁŠEK, J.; PEKÁREK, J.; SVATOŠ, V.; HADAŠ, Z.; DUŠEK, D. Circuits for the Charge Push-through Electronics: Power Efficient Signal Processing Inside the Artificial Cochlear Implant. In Eurosensors XXX conference proceedings. Procedia Engineering. Budapest: Elsevier, 2016. no. 1, p. 1710-1713. ISSN: 1877-7058.
  Detail

  ŠUBRT, K.; HOUŠKA, P.; HADAŠ, Z. Nové řídicí jednotky Faulhaber MC50xx. Automa, 2016, roč. 2016, č. 8-9, s. 66-67. ISSN: 1210-9592.
  Detail

  HADAŠ, Z.; VETIŠKA, V.; VETIŠKA, J.; KREJSA, J. Analysis and efficiency measurement of electromagnetic vibration energy harvesting system. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2016, vol. 22, no. 7, p. 1767-1779. ISSN: 0946-7076.
  Detail

  SMILEK, J.; CIESLAR, F.; HADAŠ, Z. Measuring Acceleration in the Area of Human Head for Energy Harvesting Purposes. In Proceedings of the 2016 17th International Conference on Mechatronics – Mechatronika (ME) 2016. 1. Praha: 2016. p. 85-90. ISBN: 978-80-01-05882-4.
  Detail

  JANÁK, L.; HADAŠ, Z.; SMILEK, J. Reliability Assessment of Electromechanical Energy Harvesting Systems. In Proceedings of the 2016 17th International Conference on Mechatronics – Mechatronika (ME) 2016. Praha: Czech Technical University in Prague, 2016. p. 119-122. ISBN: 978-80-01-05882-4.
  Detail

  HADAŠ, Z.; GARAMI, B. Mechatronic Model of Harmonic Drive System. In Proceedings of the 2016 17th International Conference on Mechatronics – Mechatronika (ME) 2016. 1. Praha: Czech Technical University in Prague, 2016. p. 273-278. ISBN: 978-80-01-05882-4.
  Detail

  HADAŠ, Z.; LÁN, R. Modelling and Verification of Piezoelectric Vibration Energy Harvester. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. Switzerland: Springer International Publishing Switzerland, 2016. no. 1, p. 305-310. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
  Detail

  SMILEK, J.; HADAŠ, Z. A study of kinetic energy harvesting for biomedical application in the head area. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2016, vol. 22, no. 7, p. 1535-1547. ISSN: 0946-7076.
  Detail

  RUBEŠ, O.; SMILEK, J.; BRABLC, M.; HADAŠ, Z. Nonlinear Redesign of Vibration Energy Harvester: Linear Operation Test and Nonlinear Simulation of Extended Bandwidth. In 2016 IEEE International Power Electronics and Motion Control Conference (PEMC). Varna, Bulgaria: The Institute of Electrical and Electronics Engineers, 2016. p. 737-742. ISBN: 978-1-5090-1797-3.
  Detail

  JANÁK, L.; ŠTETINA, J.; FIALA, Z.; HADAŠ, Z. Quantities and Sensors for Machine Tool Spindle Condition Monitoring. MM Science Journal, 2016, vol. 2016, no. December, p. 1648-1653. ISSN: 1805-0476.
  Detail

  KOVÁŘ, J.; MOURALOVÁ, K.; KŠICA, F.; KROUPA, J.; ANDRŠ, O.; HADAŠ, Z. Virtual Reality in Context of Industry 4.0. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 1-7. ISBN: 978-80-01-05882-4.
  Detail

• 2015

  DUŠEK, D.; HADAŠ, Z.; PEKÁREK, J.; SVATOŠ, V.; ŽÁK, J.; PRÁŠEK, J.; HUBÁLEK, J. Design of an Artificial Microelectromechanical Cochlea. In Mechatronics Systems and Materials VI. Solid State Phenomena. Pfaffikon, Switzerland: Trans Tech Publications, 2015. no. 220-221, p. 345-348. ISBN: 978-3-03835-227-3. ISSN: 1662-9779.
  Detail

  ŽÁK, J.; HADAŠ, Z.; DUŠEK, D.; PEKÁREK, J.; SVATOŠ, V.; JANÁK, L.; PRÁŠEK, J. Design of the Charge Push-Through Electronics for Fully Implantable Artificial Cochlea. In Bio-MEMS and Medical Microdevices II, Proc. of SPIE. Proceedings of SPIE. 9518. Bellingham, Washington 98227-0010 USA: SPIE, 2015. no. 50, p. 95180P-1 (95180P-9 p.)ISBN: 9781628416411. ISSN: 0277-786X.
  Detail

  SMILEK, J.; HADAŠ, Z. Assessment of MEMS energy harvester for medical applications. In Proc. SPIE 9517, Smart Sensors, Actuators, and MEMS VII; and Cyber Physical Systems. Proceedings of SPIE. Bellingham, Washington, USA: SPIE, 2015. p. 95170N (95177N p.)ISBN: 9781628416442. ISSN: 0277-786X.
  Detail

  ŠTETINA, J.; BŘEZINA, T.; HADAŠ, Z. Dynamic Analysis of Mechatronic System with Ball Screw. ENGINEERING MECHANICS 2015 21st International Conference Engineering Mechanics 2015. Engineering Mechanics. 1. Svratka: Institute of Theoretical and Applied Mechanics, Academy of Science of the Czech Republic, 2015. p. 292-293. ISBN: 978-80-86246-42-0. ISSN: 1805-8248.
  Detail

  VETIŠKA, J.; HADAŠ, Z.; HOLUB, M. Multidisciplinary Multi-Body Modeling of Machine Tools. In Engineering mechanics 2015 - extended abstracts. 2015. p. 344-345. ISBN: 978-80-86246-42-0.
  Detail

  SVATOŠ, V.; PEKÁREK, J.; DUŠEK, D.; ŽÁK, J.; HADAŠ, Z.; PRÁŠEK, J. Design and Fabrication of Fully Implantable MEMS Cochlea. In Proceeedings of DAAAM International Symposium on Intelligent Manufacturing and Automation 2014. Energy Procedia. Vienna: Elsevier, 2015. no. 1, p. 1224-1231. ISBN: 978-3-901509-99-5. ISSN: 1876-6102.
  Detail

  PROCHÁZKA, P.; PAZDERA, I.; CIPÍN, R.; HADAŠ, Z. Optimal Design Techniques for Small Electric Car Operating in Common Urban Traffic. Przeglad Elektrotechniczny, 2015, vol. 2015, no. 5, p. 1-8. ISSN: 0033-2097.
  Detail

  HADAŠ, Z.; ONDRŮŠEK, Č. Nonlinear spring-less electromagnetic vibration energy harvesting system. European Physical Journal-Special Topics, 2015, vol. 224, no. 14-15, p. 2881-2896. ISSN: 1951-6355.
  Detail

  JANÁK, L.; ANČÍK, Z.; VETIŠKA, J.; HADAŠ, Z. Thermoelectric Generator Based on MEMS Module as an Electric Power Backup in Aerospace Applications. Materials Today: Proceedings, 2015, vol. 2, no. 2, p. 865-870. ISSN: 2214-7853.
  Detail

  KOTEK, L.; HOLUB, M.; VETIŠKA, J.; HADAŠ, Z.; BLECHA, P. Non-invasive displacement measurement of lightweight structures under dynamic excitations. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). American Society of Mechanical Engineers (ASME), 2015. p. 5-11. ISBN: 978-0-7918-4648-3.
  Detail

  VETIŠKA, V.; HADAŠ, Z.; HYNČICA, O.; ONDRŮŠEK, Č. Autonomous Monitoring Unit of Fault Condition with Vibration Energy Harvester. In Environment and Electrical Engineering (EEEIC), 2015 IEEE 15th International Conference on. Řím: 2015. p. 980-985. ISBN: 978-1-4799-7993-6.
  Detail

  JANÁK, L.; HADAŠ, Z. Machine Tool Health and Usage Monitoring System: An Initial Analyses. MM Science Journal, 2015, vol. 2015, no. December, p. 794-798. ISSN: 1803-1269.
  Detail

  ŽÁK, J.; HADAŠ, Z.; PEKÁREK, J.; DUŠEK, D.; SVATOŠ, V.; JANÁK, L.; PRÁŠEK, J. Model-based design of artificial zero power cochlear implant. MECHATRONICS, 2015, vol. 31, no. NA, p. 30-41. ISSN: 0957-4158.
  Detail

  ŠUBRT, K.; HOUŠKA, P.; HADAŠ, Z. Přesnost polohování s motorem Piezo LEGS. Automa, 2015, roč. 2015, č. 8-9, s. 64-65. ISSN: 1210-9592.
  Detail

  HADAŠ, Z.; VETIŠKA, V.; SMILEK, J.; ANDRŠ, O.; SINGULE, V. Efficiency of electromagnetic vibration energy harvesting system. In Proc. SPIE 9517, Smart Sensors, Actuators, and MEMS VII; and Cyber Physical Systems. Proceedings of SPIE. Bellingham, Washington, USA: SPIE, 2015. p. 95171H (95176H p.)ISBN: 9781628416442. ISSN: 0277-786X.
  Detail

• 2014

  HADAŠ, Z.; VETIŠKA, V.; HUZLÍK, R.; SINGULE, V. Model-based design and test of vibration energy harvester for aircraft application. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2014, vol. 20, no. 4-5, p. 841-843. ISSN: 0946-7076.
  Detail

  JANÁK, L.; HADAŠ, Z.; ANČÍK, Z.; KOPEČEK, P. Simulation of Power Management Electronics and Energy Storage Unit for MEMS Thermoelectric Generator. In Proceedings of the 11th European Conference on Thermoelectrics. Switzerland: Springer International Publishing, 2014. p. 189-195. ISBN: 978-3-319-07331-6.
  Detail

  HADAŠ, Z.; VETIŠKA, J. Energy Harvesting Analysis of Body Motion as Energy Source for Biomedical Devices. In Engineering mechanics 2014. Engineering Mechanics. 1. Brno: Brno University of Technology & IT AS CR, 2014. p. 204-207. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
  Detail

  HOLUB, M.; HADAŠ, Z.; BLECHA, P.; VETIŠKA, J.; SINGULE, V. ENERGY ANALYSIS OF ENERGY HARVESTING FROM MACHINE TOOL VIBRATIONS. MM Science Journal, 2014, vol. 2014, no. March, p. 462-465. ISSN: 1805-0476.
  Detail

  HADAŠ, Z.; KŠICA, F. Model-based Design of Testing Electromagnetic Shaker with Flexible Beam. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 393-398. ISBN: 978-80-214-4817-9.
  Detail

  BŘEZINA, T.; BŘEZINA, L.; MAREK, J.; HADAŠ, Z.; VETIŠKA, J. SIMULATION ASSESSMENT OF SUPPRESSION OF MACHINE TOOL VIBRATIONS. In Engineering mechanics 2014. 1. 2014. p. 104-107. ISBN: 978-80-214-4871-1.
  Detail

  KOTEK, L.; HOLUB, M.; VETIŠKA, J.; ŠUBRT, K.; HADAŠ, Z.; BLECHA, P. Comparison of Suitability of Tracking Marks for Optical Measurement of Displacement. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 489-493. ISBN: 978-80-214-4817-9.
  Detail

  RUBEŠ, O.; SMILEK, J.; HADAŠ, Z. Development of Vibration Energy Harvester Fabricated by Rapid Prototyping Technology. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 178-182. ISBN: 978-80-214-4817-9.
  Detail

  ŠTETINA, J.; BŘEZINA, T.; VETIŠKA, J.; HADAŠ, Z. Multibody Model of Heavy Machine Tool. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 266-270. ISBN: 978-80-214-4817-9.
  Detail

  TOMAN, J.; SINGULE, V.; HADAŠ, Z. Model of Aircraft Actuator with BLAC Motor. In 16th INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE AND EXPOSITION (PEMC 2014). 1. Antalya: Gazi University, Turkey, 2014. p. 278-283. ISBN: 978-1-4799-2060-0.
  Detail

  ANČÍK, Z.; HADAŠ, Z.; VLACH, R.; JANÁK, L.; SINGULE, V.; PROCHÁZKA, P. Simulation Modelling of MEMS Thermoelectric Generator for Aircraft Applications. In 16th INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE AND EXPOSITION (PEMC 2014). 1. Antalya: Gazi University, Turkey, 2014. p. 265-270. ISBN: 978-1-4799-2060-0.
  Detail

  JANÁK, L.; HADAŠ, Z. Power Management Electronics for Thermoelectric Energy Harvesting Systems. ERIN 2014. Brno: Brno University of Technology, 2014. p. 34-34. ISBN: 978-80-214-4931-2.
  Detail

  ANDRŠ, O.; KOVÁŘ, J.; HADAŠ, Z. Introduction to Design of Speed Controller for Fuel Pump. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: VUT v Brně, 2014. p. 672-676. ISBN: 978-80-214-4817-9.
  Detail

• 2013

  HADAŠ, Z.; ANDRŠ, O.; VETIŠKA, V.; ANČÍK, Z. ENERGY HARVESTING TECHNOLOGIES FOR SPECIAL APPLICATIONS. In Proceedings of the International Conference on Military Technologies 2013 (ICMT'13). 1. Brno: University of Defence, 2013. p. 173-181. ISBN: 978-80-7231-917-6.
  Detail

  DUŠEK, D.; HADAŠ, Z.; PEKÁREK, J.; SVATOŠ, V.; ŽÁK, J.; HUBÁLEK, J.; PRÁŠEK, J. Design of Artificial Microelectromechanical Cochlea. 2013. 4 p.
  Detail

  ANDRŠ, O.; HADAŠ, Z.; KOVÁŘ, J.; VETIŠKA, J.; SINGULE, V. Model-Based Design of Mobile Platform with Integrated Actuator – Design with Respect to Mechatronic Education. In MECHATRONICS 2013: RECENT TECHNOLOGICAL AND SCIENTIFIC ADVANCES. 1. Springer, 2013. p. 891-988. ISBN: 978-3-319-02294-9.
  Detail

  JANÁK, L.; ANČÍK, Z.; HADAŠ, Z. Simulation Modelling of MEMS Thermoelectric Generators for Mechatronic Applications. In MECHATRONICS 2013: RECENT TECHNOLOGICAL AND SCIENTIFIC ADVANCES. Springer, 2013. p. 265-271. ISBN: 978-3-319-02294-9.
  Detail

  BŘEZINA, T.; BŘEZINA, L.; MAREK, J.; HADAŠ, Z.; VETIŠKA, J. Simulation Assessment of Suspension of Tool Vibrations during Machining. In Mechatronics 2013 Recent Technological and Scientific Advances. 1. Springer, 2013. p. 273-282. ISBN: 978-3-319-02294-9.
  Detail

  ANČÍK, Z.; VLACH, R.; JANÁK, L.; KOPEČEK, P.; HADAŠ, Z. Modeling, simulation and experimental testing of the MEMS thermoelectric generators in wide range of operational conditions. In Proceedings of SPIE Smart Sensors, Actuators, and MEMS IV. 8763. Bellingham, Washington, USA: SPIE, 2013. p. 87631M-1 (87631M-10 p.)ISBN: 9780819495600.
  Detail

  HADAŠ, Z.; VETIŠKA, V.; ANČÍK, Z.; ONDRŮŠEK, Č.; SINGULE, V. Development of energy harvester system for avionics. In Proceedings of SPIE Smart Sensors, Actuators, and MEMS VI. 8763. Bellingham, Washington, USA: SPIE, 2013. p. 87631F-1 (87631F-8 p.)ISBN: 978-0-8194-9560-0.
  Detail

  HADAŠ, Z.; HUZLÍK, R. FEM Model of Electro-magnetic Vibration Energy Harvester. In Mechatronics 2013: Recent Technological and Scientific Advances. Springer, 2013. p. 371-377. ISBN: 978-3-319-02294-9.
  Detail

  DUŠEK, D.; SVATOŠ, V.; PEKÁREK, J.; ŽÁK, J.; HADAŠ, Z.; PRÁŠEK, J.; HUBÁLEK, J. Research of low power full implantable microelectromechanicalcochlear implant. Espoo: Aalto university, 2013. 4 p.
  Detail

• 2012

  VETIŠKA, J.; HADAŠ, Z. Using of Simulation Modelling for Developing of Active Damping System. In 2012 INTERNATIONAL SYMPOSIUM ON Power Electronics, Electrical Drives, Automation and Motion. Sorrento: 2012. p. 1199-1204. ISBN: 978-1-4673-1300-1.
  Detail

  HADAŠ, Z.; BŘEZINA, T.; ANDRŠ, O.; VETIŠKA, J.; BŘEZINA, L. SIMULATION MODELLING OF MECHATRONIC SYSTEM WITH FLEXIBLE PARTS. In 15th International Power Electronics and Motion Control Conference and Exposition, EPE-PEMC 2012 ECCE Europe. 1. Novi Sad, Serbia: EPE-PEMC Council, 2012. p. LS2e.1-1 (LS2e.1-7 p.)ISBN: 978-1-4673-1971-3.
  Detail

  HADAŠ, Z.; KURFÜRST, J.; ONDRŮŠEK, Č.; SINGULE, V. Artificial intelligence based optimization for vibration energy harvesting applications. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2012, vol. 18, no. 7-8, p. 1003-1014. ISSN: 0946-7076.
  Detail

  HADAŠ, Z.; VETIŠKA, J.; JURIGA, J. Stability Analysis of Cutting Process Using of Flexible Model in ADAMS. In Proceedings of 15th International Conference on Mechatronics – Mechatronika 2012. 1. Praha: Czech Technical University in Prague, 2012. p. 5-10. ISBN: 978-80-01-04987-7.
  Detail

  BŘEZINA, T.; HADAŠ, Z.; VETIŠKA, J. Simulation Behavior of Machine Tool on the Base of Structural Analysis in Multi-Body System. In Proceedings of 15th International Conference on Mechatronics – Mechatronika 2012. 1. Praha: Czech Technical University in Prague, 2012. p. 347-350. ISBN: 978-80-01-04987-7.
  Detail

  HADAŠ, Z.; VETIŠKA, V.; SINGULE, V.; ANDRŠ, O.; KOVÁŘ, J.; VETIŠKA, J. Energy Harvesting from Mechanical Shocks Using A Sensitive Vibration Energy Harvester. International Journal of Advanced Robotic Systems, 2012, vol. 2012, no. 9, p. 1-7. ISSN: 1729-8806.
  Detail

• 2011

  BŘEZINA, T.; VETIŠKA, J.; HADAŠ, Z.; BŘEZINA, L. Simulation Modelling and Control of Mechatronic Systems with Flexible Parts. In Mechatronics Recent Technological and Scientific Advances. Berlin: Springer, 2011. p. 569-578. ISBN: 978-3-642-23243-5.
  Detail

  BŘEZINA, T.; VETIŠKA, J.; HADAŠ, Z. SIMULATION MODELLING OF MACHINE TOOLS WITH FLEXIBLE PARTS AS MECHATRONIC SYSTEM. In Proceedings of the International Conference on Advances in Mechatronics 2011 (AIM 11). 1. Brno: Expertia o.p.s., 2011. p. 99-104. ISBN: 978-80-7231-848-3.
  Detail

  BŘEZINA, T.; HADAŠ, Z.; VETIŠKA, J. Using of Co-simulation ADAMS-SIMULINK for Development of Mechatronic Systems. In PROCEEDINGS OF 14th INTERNATIONAL CONFERENCE ON MECHATRONICS. Trenčín: AD University of Trencin, 2011. p. 59-64. ISBN: 978-80-8075-476-1.
  Detail

  HADAŠ, Z.; SINGULE, V. ENERGY HARVESTING – OPPORTUNITY FOR FUTURE REMOTE APPLICATIONS. In Engineering Mechanics 2011. 1. Praha: Academy of sciences of the Czech Republic, v.v.i., 2011. s. 167-170. ISBN: 978-80-87012-33-8.
  Detail

  BŘEZINA, T.; ANDRŠ, O.; BŘEZINA, L.; HADAŠ, Z.; HOUŠKA, P.; KOVÁŘ, J.; VETIŠKA, J. VIRTUAL DESIGN OF INDUSTRIAL MANIPULATOR USING MECHATRONIC APPROACH. In Proceedings of the International Conference on Advances in Mechatronics 2011 (AIM 11). 1. Brno: Expertia o.p.s., 2011. p. 105-110. ISBN: 978-80-7231-848-3.
  Detail

  HADAŠ, Z.; ONDRŮŠEK, Č.; KURFÜRST, J.; SINGULE, V. Vibration energy harvester optimization using artificial intelligence. In Microtechnologies for the New Millennium 2011 (Proceedings Volume 8066-8069). Proceedings of SPIE. 8066. 1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA: SPIE-INT SOC OPTICAL ENGINEERING, 2011. p. 1-12. ISBN: 9780819486554. ISSN: 0277-786X.
  Detail

• 2010

  HADAŠ, Z.; VĚCHET, S.; SINGULE, V.; ONDRŮŠEK, Č. Development of Energy Harvesting Sources for Remote Applications as Mechatronic systems. In PROCEEDINGS OF 14TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (EPE-PEMC 2010). Ohrid: 2010. s. 13-19. ISBN: 978-1-4244-7854-5.
  Detail

  HADAŠ, Z.; SINGULE, V. New Subject Energy Harvesting for Education of Mechatronics. In Proceedings of 13th international symposium on mechatronics, Mechatronika 2010. Trenčín: AD University of Trencin, 2010. p. 16-17. ISBN: 978-80-8075-476-1.
  Detail

  BŘEZINA, T.; HADAŠ, Z.; SINGULE, V.; BLECHA, P. European Projects for Support of Mechatronic Fields at Brno University of Technology. In Proceedings of 13th international symposium on mechatronics, Mechatronika 2010. Trenčín: AD University of Trencin, 2010. p. 109-111. ISBN: 978-80-8075-476-1.
  Detail

  HADAŠ, Z.; ONDRŮŠEK, Č.; SINGULE, V. Power sensitivity of vibration energy harvester. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2010, vol. 16, no. 5, p. 691-702. ISSN: 0946-7076.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. Verification of Vibration Power Generator Model for Prediction of Harvested Power. Solid State Phenomena, 2010, vol. 2010, no. 164, p. 291-296. ISSN: 1012-0394.
  Detail

  SINGULE, V.; HADAŠ, Z. Elektrické mikropohony v medicínské technice. Automa, 2010, roč. 16, č. 4, s. 48-49. ISSN: 1210-9592.
  Detail

• 2009

  HADAŠ, Z.; ONDRŮŠEK, Č.; KURFÜRST, J. Optimization of Vibration Power Generator Parameters Using Self-Organizing Migrating Algorithm. In Recent Advancecs in Mechatronics 2008-2009. 1. Berlin: Springer-Verlag Berlin Heidelberg, 2009. p. 245-250. ISBN: 978-3-642-05021-3.
  Detail

  HADAŠ, Z.; SINGULE, V. ENERGY HARVESTING DEVICES AS MECHATRONIC SYSTEMS. In Book of Abstracts 12th International Conference on Mechatronics Mechatronika 2009. 1. Trenčín: AD University of Trenčín Faculty of Mechatronics, 2009. s. 3-7. ISBN: 978-80-8075-394-8.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. Optimal Design of Vibration Power Generator for Low Frequency. Solid State Phenomena, 2009, vol. 2009, no. 147-149, p. 426-431. ISSN: 1012-0394.
  Detail

  HADAŠ, Z.; ONDRŮŠEK, Č.; SINGULE, V. Increasing Sensitivity of Vibration Energy Harvester. Proceedings of SPIE, 2009, vol. 7362, no. 1, p. 1-8. ISSN: 0277-786X.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. VERIFICATION OF VIBRATION POWER GENERATOR MODEL FOR PREDICTION OF HARVESTED POWER. In The 5th International Conference Mechatronic Systems and Materials. 1. Vilnius: VilniusTechnika, 2009. p. 27-29. ISBN: 978-9955-28-493-2.
  Detail

• 2008

  HADAŠ, Z.; ZOUHAR, J.; SINGULE, V.; ONDRŮŠEK, Č. Design of Energy Harvesting Generator Base on Rapid Prototyping Parts. In 2008 13th Power Electronics and Motion Control Conference. 1. Poznan, POLAND: 2008. p. 1688-1692. ISBN: 978-1-4244-1741-4.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. UNIQUE WAYS OF GENERATING ENERGY FROM SURROUNDINGS AS AUTONOMOUS SOURCES OF ELECTRICAL ENERGY. In International conference on "Low Voltage Electrical Machines". 1. Šlapanice u Brna: Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, Ústav výkonové elektrotechniky a elektroniky, 2008. p. 21-22. ISBN: 978-80-214-3795-1.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. Optimal Design of Vibration Power Generator for Low Frequency. The 4th International Conference Mechatronic Systems and Materials. 1. Bialystok: Bialystok Technical University Press, 2008. p. 137-137.
  Detail

  HADAŠ, Z.; ZOUHAR, J. APPLICATION OF RAPID PROTOTYPING METHOD FOR DEVELOPMENT OF MECHATRONIC SYSTEMS. In Engineering Mechanics 2008. 1. Prague: Institute of Termomechanics, Academy of Sciences of the Czech Republic, 2008. p. 80-81. ISBN: 978-80-87012-11-6.
  Detail

  HADAŠ, Z.; ONDRŮŠEK, Č.; SINGULE, V.; KLUGE, M. Vibration Power Generator for Aeronautics Applications. In Proceedings of the EUSPEN 10th anniversary international conference Volume I - Volume II. 1. Zurich: Copy & Druck Wein, 2008. p. 46-50. ISBN: 978-0-9553082-5-3.
  Detail

• 2007

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. Simulation of Vibration Generator Non-linear Model. In Dynamics of Machines 2007. 1. Praha: Ústav termomechaniky AV ČR, 2007. s. 71-76. ISBN: 978-80-87012-03-01.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č.; KLUGE, M. SIZE MATCHING OF VIBRATION POWER GENERATOR. In 16th International Conference on Electrical Drivesand Power Electronics. 1. 2007. p. 1-5. ISBN: 978-80-8073-867-9.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. Simullation Modeling of Electromagetic Vibration Power Generator. In Engineering Mechanics 2007. 1. Prague: Institute of Termomechanics, Academy of Sciences of the Czech Republic, 2007. p. 71-72. ISBN: 978-80-87012-06-2.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. Development of Vibration Power Generator for Aeronautic Application. In Simulation Modelling of Mechatronic Systems III. Mechatronika. 2007. p. 83-100. ISBN: 978-80-214-3559-9.
  Detail

  BŘEZINA, T.; SINGULE, V.; HADAŠ, Z. Mechatronics Implementation Methodology At New Products Development And Design. In AiM 2007. 1. Brno: Expertia o.p.s., 2007. s. 1-18. ISBN: 978-80-7231-314-3.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č.; KLUGE, M. Simulation of Vibration Power Generator. In Recent Advances in Mechatronics. 1. Berlin Heidelberg: Springer, 2007. p. 350-354. ISBN: 978-3-540-73955-5.
  Detail

  HADAŠ, Z.; KLUGE, M.; SINGULE, V.; ONDRŮŠEK, Č. Electromagnetic Vibration Power Generator. In 6th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drivers. 1. Cracow, POLAND: IEEE, 2007. p. 451-455. ISBN: 978-1-4244-1061-3.
  Detail

• 2006

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. OPTIMAL DESIGN OF VIBRATION GENERATOR FUNCTION PRODUCT AND VERIFICATION OF MODEL. In Simulation Modelling of Mechatronic Systems II. Mechatronika. 2006. p. 85-97. ISBN: 80-214-3341-8.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. TUNING UP PARAMETERS OF VIBRATION GENERATOR. In Engineering Mechanics 2006. Svratka, Česká Republika: Academy of Sciences of the Czech Republik, 2006. 2 s. ISBN: 80-86246-27-2.
  Detail

  SINGULE, V.; HADAŠ, Z.; ONDRŮŠEK, Č. ANALYSIS OF GENERIC ENERGY HARVESTING VIBRATION GENERATOR. In 5th Conference on Advanced Engineering Design. 1. Prague: Orgis s.r.o, 2006. 5 p.
  Detail

  SINGULE, V.; HADAŠ, Z.; ONDRŮŠEK, Č. ANALYSIS OF VIBRATION POWER GENERATOR. In ENGINEERING MECHANICS 2006. 2006. 2 s. ISBN: 80-86246-27-2.
  Detail

  SINGULE, V., HADAŠ, Z., ONDRŮŠEK, Č. OVERALL TUNING UP OF VIBRATION GENERATOR AND CHOICE OF ENERGY TRANSDUCER CONSTRUCTION. In Advanced Engineering Design 2006. Prague: Orgis s.r.o, 2006. 5 p.
  Detail

• 2005

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. MECHANISM OF VIBRATION MICROGENERATOR BASED ON NON-LINEAR STIFFNESS. Inženýrská mechanika - Engineering Mechanics, 2005, vol. 12, no. A1, 6 p. ISSN: 1210-2717.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. The comparison and assessment of different conception of vibration microgenerator construction. In ENGINEERING MECHANICS 2005. Svratka, Česká Republika: Fakulta strojního inženýrství, VUT v Brně, 2005. 2 p. ISBN: 80-85918-93-5.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. Design and Simulating Modelling of Vibration Microgenerator. In Simulation Modelling of Mechatronic Systems I. Mechatronika. Brno: Brno University of Technology, Faculty of Mechanical Engineering, 2005, 2005. 12 p. ISBN: 80-214-3144-X.
  Detail

  HADAŠ, Z.; SINGULE, V.; ONDRŮŠEK, Č. The Comparison of the Simulation Results of the Vibration Microgenerator Model with the Measuring of the Vibration Microgenerator Prototype. In International Symposium on Electrical Machines SME 2005. 1. Opole, Polsko: Oficyna Widawnicza Politechniky Opolskiej, 2005. 4 p. ISBN: 83-88492-74-8.
  Detail

• 2004

  HADAŠ, Z., SINGULE, V. The design of a vibraton microgenerator. In "Low Voltage Electrical Machines" Joint Czech - Polish Conference on Project GACR 102/038013. Brno: Faculty of Electrical Engineering and Communication, Brno University of Technolgy; Department of Electrical Machines and Devices Silesian University of Technology, Gliwice, 2004. 6 p. ISBN: 80-214-2632-2.
  Detail

  HADAŠ, Z., SINGULE, V. Design of a vibraton microgenerator. In 2nd International PhD Conference on Mechnical Engineering - PhD2004. Plzeň: Faculty of Mechanical Engineering, Department of Machine Design, Západočeská Universita v Plzni, 2004. 2 p. ISBN: 80-7043-330-2.
  Detail

  HADAŠ, Z., SINGULE, V. Studie realizovatelnosti vibračního mikrogenerátoru. In Proceedings of the 7th International Symposium "Topical Questions of Teaching Mechatronics". Bratislav, SK: Slovak University of Technology Bratislava, Faculty of Mechanical Engineering CA MECHATRONICS, 2004. 6 s. ISBN: 80-227-2064-X.
  Detail

*) Citations are generated once every 24 hours.