Publication results

• 2024

  KROBOT, Š.; MENČÍK, P.; CHALOUPKOVÁ, K.; BOČKAJ, J.; AGÓCSOVÁ, S.; KLUSÁČEK RAMPICHOVÁ, M.; HEDVIČÁKOVÁ, V.; ALEXY, P.; PŘIKRYL, R.; MELČOVÁ, V. Optimizing printability and mechanical properties of poly(3-hydroxybutyrate) biocomposite blends and their biological response to Saos-2 cells. International Journal of Bioprinting, 2024, vol. 11, no. 1, p. 1-18. ISSN: 2424-8002.
  Detail

  JAŠEK, V.; FUČÍK, J.; MELČOVÁ, V.; PŘIKRYL, R.; FIGALLA, S. Improvements in the Production of Isosorbide Monomethacrylate Using a Biobased Catalyst and Liquid-Liquid Extraction Isolation for Modifications of Oil-Based Resins. ACS Omega, 2024, vol. 9, no. 23, 11 p. ISSN: 2470-1343.
  Detail

  MELČOVÁ, V.; KROBOT, Š.; ŠINDELÁŘ, J.; ŠEBOVÁ, E.; KLUSÁČEK RAMPICHOVÁ, M.; PŘIKRYL, R. The effect of surface roughness and wettability on the adhesion and proliferation of Saos-2 cells seeded on 3D printed poly(3-hydroxybutyrate)/polylactide (PHB/PLA) surfaces. Results in Surfaces and Interfaces, 2024, vol. 16, no. August, p. 1-18. ISSN: 2666-8459.
  Detail

• 2023

  KROBOT, Š.; MELČOVÁ, V.; MENČÍK, P.; PŘIKRYL, R. 3D Printed Scaffolds Based on Poly(3-hydroxybutyrate) and Its Blends for Use in Medical Applications and Tissue Engineering. Brno, Česká republika: 2023. p. 143-143.
  Detail

  JAŠEK, V.; MELČOVÁ, V.; FIGALLA, S.; FUČÍK, J.; MENČÍK, P.; PŘIKRYL, R. Study of the Thermomechanical Properties of Photocured Resins Based on Curable Monomers from PLA and PHB for SLA 3D Printing. ACS Applied Polymer Materials, 2023, vol. 5, no. 12, p. 9909-9917. ISSN: 2637-6105.
  Detail

  KROBOT, Š.; MELČOVÁ, V.; PŘIKRYL, R. The study of adhesion and proliferation of cells on 3D printed PHB/PLA surfaces – the influence of surface roughness and wetting characteristics. Sborník abstraktů ze studentské odborné konference "Chemie je život 2023". Purkyňova 464/118, 612 00 Brno: Vysoké učení technické v Brně, Fakulta chemická, 2023. p. 84-84. ISBN: 978-80-214-6204-5.
  Detail

  JAŠEK, V.; FUČÍK, J.; MELČOVÁ, V.; FIGALLA, S.; MRAVCOVÁ, L.; KROBOT, Š.; PŘIKRYL, R. Synthesis of Bio-Based Thermoset Mixture Composed of Methacrylated Rapeseed Oil and Methacrylated Methyl Lactate: One-Pot Synthesis Using Formed Methacrylic Acid as a Continual Reactant. Polymers, 2023, vol. 15, no. 8, p. 1-21. ISSN: 2073-4360.
  Detail

  KROBOT, Š.; MELČOVÁ, V.; MENČÍK, P.; KONTÁROVÁ, S.; RAMPICHOVÁ, M.; HEDVIČÁKOVÁ, V.; MOJŽIŠOVÁ, E.; BACO, A.; PŘIKRYL, R. Poly(3-hydroxybutyrate) (PHB) and Polycaprolactone (PCL) Based Blends for Tissue Engineering and Bone Medical Applications Processed by FDM 3D Printing. Polymers, 2023, vol. 15, no. 10, p. 1-17. ISSN: 2073-4360.
  Detail

  KROBOT, Š.; MELČOVÁ, V.; PŘIKRYL, R. POLY(3-HYDROXYBUTYRATE) BASED MATERIALS FOR 3D PRINTING OF MEDICAL APPLICATIONS FOR TISSUE ENGINEERING. Czech Chemical Society Symposium Series. Czech Chemical Society Symposium, 2023. p. 91-91. ISSN: 2336-7210.
  Detail

• 2022

  MENČÍK, P.; PŘIKRYL, R.; KROBOT, Š.; MELČOVÁ, V.; KONTÁROVÁ, S.; PLAVEC, R.; BOČKAJ, J.; HORVÁTH, V.; ALEXY, P. Evaluation of the Properties of PHB Composite Filled with Kaolin Particles for 3D Printing Applications Using the Design of Experiment. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 2022, vol. 23, no. 22, 13 p. ISSN: 1422-0067.
  Detail

  POSPÍŠILOVÁ, A.; VODIČKA, J.; TRUDIČOVÁ, M.; JUGLOVÁ, Z.; SMILEK, J.; MENČÍK, P.; MÁSILKO, J.; SLANINOVÁ, E.; MELČOVÁ, V.; KALINA, M.; OBRUČA, S.; SEDLÁČEK, P. Effects of Differing Monomer Compositions on Properties of P(3HB-co-4HB) Synthesized by Aneurinibacillus sp. H1 for Various Applications. Polymers, 2022, vol. 14, no. 10, p. 1-12. ISSN: 2073-4360.
  Detail

  KROBOT, Š.; MELČOVÁ, V.; PŘIKRYL, R. Poly(3-hydroxybutyrate) based materials for 3D printing in medical applications. Sborník abstraktů ze studentské odborné konference "Chemistry is life 2022". Purkyňova 464/118, 612 00 Brno: Vysoké učení technické v Brně, Fakulta chemická, 2022. p. 37-38. ISBN: 978-80-214-6117-8.
  Detail

• 2021

  MELČOVÁ, V.; PŘIKRYL, R. Poly(3-hydroxybutyrate) chain extension in the solution using bi- and trifunctional additives. Sborník abstraktů Chemie je život 2021. Brno: Vysoké učení technické v Brně, Fakulta chemická, 2021. p. 92-93. ISBN: 978-80-214-6002.
  Detail

  POSPÍŠILOVÁ, A.; MELČOVÁ, V.; FIGALLA, S.; MENČÍK, P.; PŘIKRYL, R. Techniques for increasing the thermal stability of poly[(R)-3-hydroxybutyrate] recovered by digestion methods. POLYMER DEGRADATION AND STABILITY, 2021, vol. 193, no. 1, p. 1-7. ISSN: 0141-3910.
  Detail

  TOCHÁČEK, J.; PŘIKRYL, R.; MENČÍK, P.; MELČOVÁ, V.; FIGALLA, S. The chances of thermooxidation stabilization of poly(3-hydroxybutyrate) during processing - a critical evaluation. JOURNAL OF APPLIED POLYMER SCIENCE, 2021, vol. 0, no. 0, p. 1-10. ISSN: 1097-4628.
  Detail

• 2020

  PLAVEC, R.; HLAVÁČIKOVÁ, S.; OMANÍKOVÁ, L.; FERANC, J.; VANOVČANOVÁ, Z.; TOMANOVÁ, K.; BOČKAJ, J.; KRUŽELÁK, J.; MEDLENOVÁ, E.; GÁLISOVÁ, I.; DANIŠOVÁ, L.; PŘIKRYL, R.; FIGALLA, S.; MELČOVÁ, V.; ALEXY, P. Recycling possibilities of bioplastics based on PLA/PHB blends. POLYMER TESTING, 2020, vol. 92, no. 1, p. 1-12. ISSN: 0142-9418.
  Detail

  KONTÁROVÁ, S.; PŘIKRYL, R.; MELČOVÁ, V.; MENČÍK, P.; HORÁLEK, M.; FIGALLA, S.; PLAVEC, R.; FERANC, J.; SADÍLEK, J.; POSPÍŠILOVÁ, A. Printability, Mechanical and Thermal Properties of Poly(3-Hydroxybutyrate)-Poly(Lactic Acid)-Plasticizer Blends for Three-Dimensional (3D) Printing. Materials, 2020, vol. 13, no. 21, p. 1-27. ISSN: 1996-1944.
  Detail

  MELČOVÁ, V.; CHALOUPKOVÁ, K.; MENČÍK, P.; KONTÁROVÁ, S.; RAMPICHOVÁ, M.; HEDVIČÁKOVÁ, V.; SOVKOVÁ, V.; PŘIKRYL, R.; VOJTOVÁ, L. FDM 3D Printed Composites for Bone Tissue Engineering Based on Plasticized Poly(3-hydroxybutyrate)/poly(d,l-lactide) Blends. Polymers, 2020, vol. 12, no. 12, p. 1-19. ISSN: 2073-4360.
  Detail

  MELČOVÁ, V.; CHALOUPKOVÁ, K.; VOJTOVÁ, L.; RAMPICHOVÁ, M. Plasticized poly(3‑hydroxybutyrate)/poly(d,l‑lactide) blends filled with tricalcium phosphate for FDM 3D printing and their biological properties. Sborník abstraktů Chemie je živo 2020. Brno: Vysoké učení technické v Brně, Fakulta chemická, 2020. p. 106-107. ISBN: 978-80-214-5920-0.
  Detail

• 2019

  MENČÍK, P.; PŘIKRYL, R.; MELČOVÁ, V. STUDY OF EFFICIENCY OF HALLOYSITE NANOTUBES DISPERGATION IN POLY(VINYL ACETATE) MATRIX. In 10TH ANNIVERSARY INTERNATIONAL CONFERENCE ON NANOMATERIALS - RESEARCH & APPLICATION (NANOCON 2018 (R)). Ostrava, Czech Republic: TANGER LTD, KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC, 2019. p. 647-651. ISBN: 978-80-87294-89-5.
  Detail

  MENČÍK, P.; MELČOVÁ, V.; KONTÁROVÁ, S.; PŘIKRYL, R.; PERĎOCHOVÁ, D.; REPISKÁ, M. Biodegradable composite materials based on poly(3 hydroxybutyrate) for 3D printing applications. Materials Science Forum, 2019, no. 955, p. 56-61. ISSN: 1662-9752.
  Detail

  MARÁČKOVÁ, L.; MELČOVÁ, V.; SAMEK, J.; ZMEŠKAL, O. Thermal Properties of Electro Insulating Papers. Materials Science Forum, 2019, vol. 2019, no. 955, p. 25-30. ISSN: 1662-9752.
  Detail

  MELČOVÁ, V.; PŘIKRYL, R.; MENČÍK, P.; TOCHÁČEK, J. Processing stabilization of poly(3-hydroxybutyrate)/poly(lactic acid) blends with oligomeric carbodiimide. Materials Science Forum, 2019, vol. 955, no. 2019, p. 7-12. ISSN: 1662-9752.
  Detail

• 2018

  MARÁČKOVÁ, L.; MELČOVÁ, V.; SAMEK, J.; ZMEŠKAL, O. Thermal Properties of Electro Insulating Papers. 7th Meeting on Chemistry and Life 2018, Book of abstracts. Brno: Vysoké učení technické v Brně, Fakulta chemická, 2018. p. 139-139. ISBN: 978-80-214-5488-0.
  Detail

  MENČÍK, P.; PŘIKRYL, R.; MELČOVÁ, V. STUDY OF EFFICIENCY OF HALLOYSITE NANOTUBES DISPERGATION IN POLY(VINYLACETATE) MATRIX. In NANOCON 2018 Conference Proceedings. 1st Edition, 2018. Keltickova 62, 710 00 Ostrava, Czech Republic, EU: TANGER Ltd., Keltickova 62, 710 00 Ostrava, Czech Republic, EU, 2018. p. 647-651. ISBN: 978-80-87294-89-5.
  Detail

  MENČÍK, P.; PŘIKRYL, R.; STEHNOVÁ, I.; MELČOVÁ, V.; KONTÁROVÁ, S.; FIGALLA, S.; ALEXY, P., BOČKAJ, J. Effect of Selected Commercial Plasticizers on Mechanical, Thermal, and Morphological Properties of Poly(3-hydroxybutyrate)/ Poly(lactic acid)/Plasticizer Biodegradable Blends for Three-Dimensional (3D) Print. Materials, 2018, vol. 11, no. 10, p. 1-20. ISSN: 1996-1944.
  Detail

*) Citations are generated once every 24 hours.