Publication results

• 2025

  CHAMRADOVÁ, I.; KADLECOVÁ, Z.; TUŠLOVÁ, K.; REBENDA, D.; ČÍPEK, P.; GREGORA, J.; STREĎANSKÁ, A.; MENČÍK, P.; VRBKA, M.; VOJTOVÁ, L. pHEMA Hydrogels as a Cartilage-Mimicking Material for Biotribological Studies. Vanajanlinna, Hämeenlinna, Finland: 2025. p. 41-41.
  Detail

  ODEHNAL, L.; RANUŠA, M.; MALÝ, M.; KŘUPKA, I.; KOUTNÝ, D.; HARTL, M.; VRBKA, M. Tribological behaviour of additively manufactured Ti6Al4V with controlled surface structure: An application in small joint implants. Tribology International, 2025, vol. 211, no. November, p. 1-12. ISSN: 0301-679X.
  Detail

  STREĎANSKÁ, A.; ŠIMEK, M.; MATONOHOVÁ, J.; NEČAS, D.; VRBKA, M.; SUCHÁNEK, J.; PAVLIŇÁKOVÁ, V.; VOJTOVÁ, L.; HARTL, M.; KŘUPKA, I.; NEŠPOROVÁ, K. Optimizing Hyaluronan-Based Lubricants for Treating Thoracolumbar Fascia Pathologies: Insights from Tribological and Pharmacokinetic Studies. Lubricants, 2025, vol. 13, no. 4, p. 1-17. ISSN: 2075-4442.
  Detail

  ŽŮREK, M.; MARKUSÍK, D.; REBENDA, D.; KALINA, L.; HARTL, M.; VRBKA, M. The Effect of Hardness and Surface Roughness of Elastomer on Friction Between Shoe Soles and Particle-Contaminated Floors. TRIBOLOGY LETTERS, 2025, vol. 73, no. 3, 15 p. ISSN: 1573-2711.
  Detail

  REBENDA, D.; ODEHNAL, L.; UHROVÁ, S.; NEČAS, D.; VRBKA, M. On the Friction and Lubrication of 3D Printed Ti6Al4V Hip Joint Replacement. TRIBOLOGY LETTERS, 2025, vol. 73, no. 2, p. 1-18. ISSN: 1023-8883.
  Detail

  RANUŠA, M.; ODEHNAL, L.; KUČERA, O.; NEČAS, D.; HARTL, M.; KŘUPKA, I.; VRBKA, M. Effect of Surface Texturing on Friction and Lubrication of Ti6Al4V Biomaterials for Joint Implants. TRIBOLOGY LETTERS, 2025, vol. 73, no. 1, p. 1-18. ISSN: 1023-8883.
  Detail

  KADLECOVA, Z.; CHAMRADOVA, I.; TUSLOVA, K.; REBENDA, D.; CIPEK, P.; GREGORA, J.; STREDANSKA, A.; SAWAE, Y.; MENCIK, P.; VRBKA, M.; VOJTOVÁ, L. Biomimetic pHEMA Hydrogels as an Alternative Cartilage-like Model Material for Biotribological Evaluations. ACS Omega, 2025, vol. 10, no. 38, p. 44147-44161.
  Detail

• 2024

  ŽÁČEK, J.; STRECKER, Z.; JENIŠ, F.; MACHÁČEK, O.; GOLDASZ, J.; SAPINSKI, B.; VRBKA, M.; KUBÍK, M. Impact of magnetorheological fluid composition on their behaviour in gradient pinch mode. Scientific Reports, 2024, vol. 14, no. 1, p. 1-12. ISSN: 2045-2322.
  Detail

  STREĎANSKÁ, A.; NEČAS, D.; VRBKA, M.; SUCHÁNEK, J.; MATONOHOVÁ, J.; TOROPITSYN, J.; HARTL, M.; KŘUPKA, I.; NEŠPOROVÁ, K. Understanding frictional behavior in fascia tissues through tribological modeling and material substitution. Journal of the Mechanical Behavior of Biomedical Materials, 2024, vol. 155, no. 7, p. 1-12. ISSN: 1751-6161.
  Detail

  CHAMRADOVÁ, I.; TUŠLOVÁ, K.; REBENDA, D.; ČÍPEK, P.; VRBKA, M.; VOJTOVÁ, L. Synthetic Hydrogels as Cartilage Models for Biomimetic Tribological Testing. Greece, Thessaloniki: 2024. p. 152-152.
  Detail

• 2023

  REBENDA, D.; RANUŠA, M.; ČÍPEK, P.; TOROPITSYN, E.; VRBKA, M. In Situ Observation of Hyaluronan Molecular Weight Effectiveness within Articular Cartilage Lubrication. Lubricants, 2023, vol. 11, no. 1, 15 p. ISSN: 2075-4442.
  Detail

  NEČAS, D.; KULÍŠEK, V.; ŠTĚPÁN, P.; ONDREÁŠ, F.; ČÍPEK, P.; HUERTA-ANGELES, G.; VRBKA, M. Friction and Lubrication of Eye/Lens/Lid Interface: The Effect of Lubricant and Contact Lens Material. TRIBOLOGY LETTERS, 2023, vol. 71, no. 4, p. 118-118. ISSN: 1023-8883.
  Detail

  NEŠPOROVÁ, K.; MATONOHOVÁ, J.; HUSBY, J.; TOROPITSYN, E.; DIVOKÁ STUPECKÁ, L.; HUSBY, A.; SUCHÁNKOVÁ KLEPLOVÁ, T.; STREĎANSKÁ, A.; ŠIMEK, M.; NEČAS, D.; VRBKA, M.; SCHLEIP, R.; VELEBNÝ, V. Injecting hyaluronan in the thoracolumbar fascia: A model study. International Journal of Biological Macromolecules, 2023, vol. 253, no. 3, p. 126879-126879. ISSN: 0141-8130.
  Detail

  ODEHNAL, L.; RANUŠA, M.; WIMMER, M.; VRBKA, M.; KŘUPKA, I. Development of lubrication film and influence on friction in a total knee replacement during a gait cycle. Tribology International, 2023, vol. 178, no. Únor, p. 108073-108073. ISSN: 0301-679X.
  Detail

  ODEHNAL, L.; RANUŠA, M.; VRBKA, M.; KŘUPKA, I.; HARTL, M. Tribological Behaviour of Ti6Al4V Alloy: An Application in Small Joint Implants. TRIBOLOGY LETTERS, 2023, vol. 71, no. 4, p. 125-125. ISSN: 1023-8883.
  Detail

  NEČAS, D.; YARIMITSU, S.; REBENDA, D.; SHINMORI, H.; VRBKA, M.; SAWAE, Y.; MURAKAMI, T.; KŘUPKA, I. On the Replacement of Articular Cartilage: The Friction of PVA Hydrogel Layer in Hip Simulator Test. Tribology International, 2023, vol. 178, no. Part B, p. 108100-108100. ISSN: 0301-679X.
  Detail

• 2022

  TOROPITSYN, E.; PRAVDA, M.; REBENDA, D.; ŠČIGALKOVÁ, I.; VRBKA, M.; VELEBNÝ, V. A composite device for viscosupplementation treatment resistant to degradation by reactive oxygen species and hyaluronidase. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2022, vol. 110, no. 2, p. 2595-2611. ISSN: 1552-4981.
  Detail

  QUINN, C.; NEČAS, D.; ŠPERKA, P.; MARIAN, M.; VRBKA, M.; KŘUPKA, I.; HARTL, M. Experimental investigation of friction in compliant contact: The effect of configuration, viscoelasticity and operating conditions. Tribology International, 2022, vol. 165, no. 1, p. 107340-107340. ISSN: 0301-679X.
  Detail

  RANUŠA, M.; ČÍPEK, P.; VRBKA, M.; PALOUŠEK, D.; KŘUPKA, I.; HARTL, M. Tribological behaviour of 3D printed materials for small joint implants: A pilot study. Journal of the Mechanical Behavior of Biomedical Materials, 2022, vol. 105274, no. 132, 14 p. ISSN: 1751-6161.
  Detail

  RANUŠA, M.; ONDRA, M.; REBENDA, D.; VRBKA, M.; GALLO, J.; KŘUPKA, I. Effects of Viscosupplementation on Tribological Behaviour of Articular Cartilage. Lubricants, 2022, vol. 10, no. 12, 15 p. ISSN: 2075-4442.
  Detail

  STREĎANSKÁ, A.; NEČAS, D.; VRBKA, M.; KŘUPKA, I.; HARTL, M.; TOROPITSYN, E.; HUSBY, J. Development of Tribological Model of Human Fascia: The Influence of Material Hardness and Motion Speed. Biotribology, 2022, vol. 30, no. 2, p. 100209-100209. ISSN: 2352-5738.
  Detail

• 2021

  MARIAN, M.; ORGELDINGER, C.; ROTHAMMER, R.; NEČAS, D.; VRBKA, M.; KŘUPKA, I.; HARTL, M.; WIMMER, M.A.; TREMMEL, S.; WARTZACK, S. Towards the Understanding of Lubrication Mechanisms in Total Knee Replacements – Part II: Numerical Modeling. Tribology International, 2021, vol. 156, no. 4, p. 106809-106809. ISSN: 0301-679X.
  Detail

  SVOBODA, P.; ŠIKULA, P.; VRBKA, M.; NEČAS, D.; ROUBALÍKOVÁ, L. VYUŽITÍ TRIBOLOGICKÝCH METOD PRO PREDIKCI OPOTŘEBENÍ DENTÁLNÍCH VÝPLŇOVÝCH MATERIÁLŮ. Česká Stomatologie a Praktické zubní lékařství. Česká lékařská společnost J.E.Purkyně FF FP, 2021, roč. 121, č. 4, s. 108-115. ISSN: 1213-0613.
  Detail

  ČERNOHLÁVEK, M.; BRANDEJSOVÁ, M.; ŠTĚPÁN, P.; VÁGNEROVÁ, H.; HERMANNOVÁ, M.; KOPECKÁ, K.; KULHÁNEK, J.; NEČAS, D.; VRBKA, M.; VELEBNÝ, V.; ANGELES, G. Insight into the Lubrication and Adhesion Properties of Hyaluronan for Ocular Drug Delivery. Biomolecules, 2021, vol. 11, no. 10, p. 1431-1431. ISSN: 2218-273X.
  Detail

  NEČAS, D.; SADECKÁ, K.; VRBKA, M.; GALANDÁKOVÁ, A.; WIMMER, M.A.; GALLO, J.; HARTL, M. The Effect of Albumin and γ-globulin on Synovial Fluid Lubrication: Implication for Knee Joint Replacements. Journal of the Mechanical Behavior of Biomedical Materials, 2021, vol. 113, no. 1, p. 104117-104117. ISSN: 1751-6161.
  Detail

  ČÍPEK, P.; VRBKA, M.; REBENDA, D.; NEČAS, D.; KŘUPKA, I. Biotribology of synovial cartilage: Role of albumin in adsorbed film formation. Engineering Science and Technology, an International Journal, 2021, vol. 34, no. 1, p. 1-12. ISSN: 2215-0986.
  Detail

  NEČAS, D.; VRBKA, M.; MARIAN, M.; ROTHAMMER, B.; TREMMEL, S.; WARTZACK, S.; GALANDÁKOVÁ, A.; GALLO, J.; WIMMER, M.; KŘUPKA, I.; HARTL, M. Towards the Understanding of Lubrication Mechanisms in Total Knee Replacements – Part I: Experimental Investigations. Tribology International, 2021, vol. 156, no. 4, p. 106874-106874. ISSN: 0301-679X.
  Detail

  HILŠER, P.; SUCHÁNKOVÁ, A.; MENDOVÁ, K.; FILIPIČ, K.E.; DANIEL, M.; VRBKA, M. A new insight into more effective viscosupplementation based on the synergy of hyaluronic acid and phospholipids for cartilage friction reduction. Biotribology, 2021, vol. 25, no. 1, p. 100166-100166. ISSN: 2352-5738.
  Detail

  RUFAQUA, R.; VRBKA, M.; HEMZAL, D.; CHOUDHURY, D.; REBENDA, D.; KŘUPKA, I.; HARTL, M. Raman analysis of chemisorbed tribofilm for metal-on-polyethylene hip joint prostheses. Biosurface and Biotribology, 2021, vol. 7, no. 1, p. 1-11. ISSN: 2405-4518.
  Detail

  REBENDA, D.; VRBKA, M.; NEČAS, D.; TOROPITSYN, E.; YARIMITSU, S.; ČÍPEK, P.; PRAVDA, M.; HARTL, M. Rheological and frictional analysis of viscosupplements towards improved lubrication of human joints. Tribology International, 2021, vol. 160, no. 1, p. 107030-107030. ISSN: 0301-679X.
  Detail

  RUFAQUA, R.; VRBKA, M.; HEMZAL, D.; CHOUDHURY, D.; REBENDA, D.; KŘUPKA, I.; HARTL, M. Analysis of Chemisorbed Tribo-Film for Ceramic-on-Ceramic Hip Joint Prostheses by Raman Spectroscopy. Journal of Functional Biomaterials, 2021, vol. 12, no. 2, p. 1-18. ISSN: 2079-4983.
  Detail

  RANUŠA, M.; WIMMER, M.; FULLAM, S.; VRBKA, M.; KŘUPKA, I. Analysis of Friction in Total Knee Prosthesis during a Standard Gait Cycle. Lubricants, 2021, vol. 9, no. 4, p. 1-14. ISSN: 2075-4442.
  Detail

• 2020

  REBENDA, D.; VRBKA, M.; ČÍPEK, P.; TOROPITSYN, E.; NEČAS, D.; PRAVDA, M.; HARTL, M. On the Dependence of Rheology of Hyaluronic Acid Solutions and Frictional Behavior of Articular Cartilage. Materials, 2020, vol. 13, no. 11, p. 1-14. ISSN: 1996-1944.
  Detail

  FURMANN, D.; NEČAS, D.; REBENDA, D.; ČÍPEK, P.; VRBKA, M.; KŘUPKA, I.; HARTL, M. The effect of synovial fluid composition, speed and load on frictional behaviour of articular cartilage. Materials, 2020, vol. 13, no. 6, p. 1-16. ISSN: 1996-1944.
  Detail

  ČÍPEK, P.; VRBKA, M.; REBENDA, D.; NEČAS, D.; KŘUPKA, I. Biotribology of Synovial Cartilage: A New Method for Visualization of Lubricating Film and Simultaneous Measurement of the Friction Coefficient. Materials, 2020, vol. 13, no. 9, p. 1-20. ISSN: 1996-1944.
  Detail

  LU, X.; NEČAS, D.; MENG, Q.; REBENDA, D.; VRBKA, M.; HARTL, M.; JIN, Z. Towards the direct validation of computational lubrication modelling of hip replacements. Tribology International, 2020, vol. 146, no. 6, p. 106240-106240. ISSN: 0301-679X.
  Detail

• 2019

  NEČAS, D.; SADECKÁ, K.; VRBKA, M.; GALLO, J.; GALANDÁKOVÁ, A.; KŘUPKA, I.; HARTL, M. Observation of lubrication mechanisms in knee replacement: A pilot study. Biotribology, 2019, vol. 17, no. 2019, p. 1-7. ISSN: 2352-5738.
  Detail

  NEČAS, D.; VRBKA, M.; GALANDÁKOVÁ, A.; KŘUPKA, I.; HARTL, M. On the observation of lubrication mechanisms within hip joint replacements. Part I: Hard-on-soft bearing pairs. Journal of the Mechanical Behavior of Biomedical Materials, 2019, vol. 89, no. 1, p. 237-248. ISSN: 1751-6161.
  Detail

  ČÍPEK, P.; REBENDA, D.; VRBKA, M.; HARTL, M. OBSERVATION OF LUBRICATION FILM IN SYNOVIAL JOINT. In Proceedings on Engineering Science. Proceedings on Engineering Sciences - 16th International Conference on Tribology. Kragujevac: University of Kragujevac, Faculty of Engineering, 2019. no. 1, p. 687-692. ISSN: 2620-2832.
  Detail

  ČÍPEK, P.; REBENDA, D.; NEČAS, D.; VRBKA, M.; KŘUPKA, I.; HARTL, M. Visualization of Lubrication Film in Model of Synovial Joint. Tribology in Industry, 2019, vol. 41, no. 3, p. 387-393. ISSN: 0354-8996.
  Detail

  RUFAQUA, R.; VRBKA, M.; CHOUDHURY, D.; HEMZAL, D.; KŘUPKA, I.; HARTL, M. A systematic review on correlation between biochemical and mechanical processes of lubricant film formation in joint replacement of the last 10 years. Lubrication Science, 2019, vol. 31, no. 3, p. 85-101. ISSN: 1557-6833.
  Detail

  REBENDA, D.; ČÍPEK, P.; VRBKA, M.; KŘUPKA, I. Effect of Hyaluronic Acid Molecular Weight on Friction of Articular Cartilage. In Proceedings on Engineering Sciences - 16th International Conference on Tribology. Proceedings on Engineering Sciences - 16th International Conference on Tribology. Kragujevac: University of Kragujevac, Faculty of Engineering, 2019. no. 1, p. 693-697. ISSN: 2620-2832.
  Detail

  RUFAQUA, R.; VRBKA, M.; CHOUDHURY, D.; HEMZAL, D.; REBENDA, D.; KŘUPKA, I.; HARTL, M. Raman spectroscopic analysis of the biochemical reaction of hyaluronic acid in joint replacement. Nashville: 2019. 1 p.
  Detail

  NEČAS, D.; VRBKA, M.; GALLO, J.; KŘUPKA, I.; HARTL, M. On the observation of lubrication mechanisms within hip joint replacements. Part II: Hard-on-hard bearing pairs. Journal of the Mechanical Behavior of Biomedical Materials, 2019, vol. 89, no. 1, p. 249-259. ISSN: 1751-6161.
  Detail

• 2018

  RANUŠA, M.; GALLO, J.; VRBKA, M.; HOBZA, M.; PALOUŠEK, D.; KŘUPKA, I.; HARTL, M. Wear Analysis of Extracted Polyethylene Acetabular Cups Using a 3D Optical Scanner. TRIBOLOGY & LUBRICATION TECHNOLOGY, 2018, vol. 74, no. 6, p. 68-84. ISSN: 1545-858X.
  Detail

  R. Rufaqua, M. Vrbka, D. Choudhury, D. Hemzal, I. Křupka, M. Hartl. THE BIOCHEMICAL PROCESS OF LUBRICANT FILM FORMATION IN JOINT REPLACEMENT. In Engineering Mechanics 2018. First. Praha: Institute of Theretical and Applied Mechanics of the Czech Academy of Sciences, 2018. p. 725-728. ISBN: 978-80-86246-88-8.
  Detail

  REBENDA, D.; ČÍPEK, P.; NEČAS, D.; VRBKA, M.; HARTL, M. Effect of Hyaluronic Acid on Friction of Articular Cartilage. In Engineering Mechanics 2018. First. Praha: Institute of Theretical and Applied Mechanics of the Czech Academy of Sciences, 2018. p. 709-712. ISBN: 978-80-86246-91-8.
  Detail

  ZEMAN, J.; RANUŠA, M.; VRBKA, M.; GALLO, J.; M.; KŘUPKA, I.; HARTL, M. UHMWPE acetabular cup creep deformation during the run-in phase of THA's life cycle. Journal of the Mechanical Behavior of Biomedical Materials, 2018, vol. 87, no. 1, p. 30-39. ISSN: 1751-6161.
  Detail

  ČÍPEK, P.; REBENDA, D.; NEČAS, D.; VRBKA, M.; KŘUPKA, I. Development of reciprocating tribometer for testing synovial joint. In Engineering Mechanics 2018. Engineering Mechanics .... First edition. Praha: Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, Prague, 2018. p. 169-172. ISBN: 978-80-86246-88-8. ISSN: 1805-8256.
  Detail

  CHOUDHURY, D.; REBENDA, D.; SASAKI, S.; HEKRLE, P.; VRBKA, M.; ZOU, M. Enhanced lubricant film formation through micro-dimpled hard-on-hard artificial hip joint: An in-situ observation of dimple shape effects. Journal of the Mechanical Behavior of Biomedical Materials, 2018, vol. 81, no. 5, p. 120-129. ISSN: 1751-6161.
  Detail

  NEČAS, D.; VRBKA, M.; REBENDA, D.; GALLO, J.; GALANDÁKOVÁ, A.; WOLFOVÁ, L.; KŘUPKA, I.; HARTL, M. In Situ Observation of Lubricant Film Formation in THR Considering Real Conformity: The Effect of Model Synovial Fluid Composition. Tribology International, 2018, vol. 117, no. 1, p. 206-216. ISSN: 0301-679X.
  Detail

  NEČAS, D.; VRBKA, M.; GALLO, J.; GALANDÁKOVÁ, A.; KŘUPKA, I.; HARTL, M. An Investigation of Lubrication Mechanisms within Hard-on-soft Hip Implants: A Pilot Study. In Proceedings of Asia International Conference on Tribology 2018 (ASIATRIB 2018). Malajsie: Malaysian Tribology Society, 2018. p. 149-150. ISBN: 978-967-13625-2-5.
  Detail

  CHOUDHURY, D.; RANUŠA, M.; FLEMING, R. A.; VRBKA, M.; KŘUPKA, I.; TEETER M. G.; GOSS, J.; ZOU, M. Mechanical Wear and Oxidative Degradation Analysis of Retrieved Ultra High Molecular Weight Polyethylene Acetabular Cups. Journal of the Mechanical Behavior of Biomedical Materials, 2018, vol. 79, no. 1, p. 314-323. ISSN: 1751-6161.
  Detail

  NEČAS, D.; VRBKA, M.; KŘUPKA, I.; HARTL, M. The Effect of Kinematic Conditions and Synovial Fluid Composition on the Frictional Behaviour of Materials for Artificial Joints. Materials, 2018, vol. 11, no. 5, p. 1-12. ISSN: 1996-1944.
  Detail

  NEČAS, D.; JAROŠ, T.; DOČKAL, K.; ŠPERKA, P.; VRBKA, M.; KŘUPKA, I.; HARTL, M. The effect of kinematic conditions on film thickness in compliant lubricated contact. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2018, vol. 140, no. 5, p. 1-8. ISSN: 0742-4787.
  Detail

• 2017

  NEČAS, D.; VRBKA, M.; URBAN, F.; GALLO, J.; KŘUPKA, I.; HARTL, M. In situ observation of lubricant film formation in THR considering real conformity: The effect of diameter, clearance and material. Journal of the Mechanical Behavior of Biomedical Materials, 2017, vol. 69, no. 5, p. 66-74. ISSN: 1751-6161.
  Detail

  CHOUDHURY, D.; VRBKA, M.; MAMAT, A.B.; STAVNESS, I.; ROY, CH.K.; MOOTANAH, R.; KŘUPKA, I. The impact of surface and geometry on coefficient of friction of artificial hip joints. Journal of the Mechanical Behavior of Biomedical Materials, 2017, vol. 72, no. 8, p. 192-199. ISSN: 1751-6161.
  Detail

  RANUŠA, M.; GALLO, J.; HOBZA, M.; VRBKA, M.; NEČAS, D.; HARTL, M. Opotřebení a drsnost artikulačního povrchu u extrahovaných polyetylénů jamky Bicon-Plus. Acta Chirurgiae Orthopaedicae et Traumatologiae Cechoslovaca, 2017, roč. 84, č. 3, s. 159-167. ISSN: 0001-5415.
  Detail

  NEČAS, D.; VRBKA, M.; GALLO, J.; KŘUPKA, I.; HARTL, M. Observation of lubrication mechanisms within artificial hip joints. Sixth World Tribology Congress (WTC 2017). Peking: Chinese Tribology Institute (CTI), 2017. p. 1-4.
  Detail

  NEČAS, D.; SAWAE, Y.; FUJISAWA, T.; NAKASHIMA, K.; MORITA, T.; YAMAGUCHI, T.; VRBKA, M.; KŘUPKA, I.; HARTL, M. The Influence of Proteins and Speed on Friction and Adsorption of Metal/UHMWPE Contact Pair. Biotribology, 2017, vol. 11, no. 2017, p. 51-59. ISSN: 2352-5738.
  Detail

• 2016

  CHOUDHURY, D.; GHOSH, S.; ALI, F.; VRBKA, M.; HARTL, M.; KŘUPKA, I. The influence of surface modification on friction and lubrication mechanism under a bovine serum lubricated condition. TRIBOLOGY TRANSACTIONS, 2016, vol. 59, no. 2, p. 316-322. ISSN: 1040-2004.
  Detail

  RANUŠA, M.; GALLO, J.; VRBKA, M.; HOBZA, M.; PALOUŠEK, D.; KŘUPKA, I.; HARTL, M. Wear Analysis of Extracted Polyethylene Acetabular Cups Using a 3D Optical Scanner. TRIBOLOGY TRANSACTIONS, 2016, vol. 60, no. 3, p. 437-447. ISSN: 1040-2004.
  Detail

  DONG, J.; SVOBODA, P.; VRBKA, M.; KOŠŤÁL, D.; URBAN, F.; ČÍŽEK, J.; ROUPCOVÁ, P.; DONG, H.; KŘUPKA, I.; HARTL, M. Towards near-permanent CoCrMo prosthesis surface by combining micro-texturing and low temperature plasma carburising. Journal of the Mechanical Behavior of Biomedical Materials, 2016, vol. 55, no. 1, p. 215-227. ISSN: 1751-6161.
  Detail

  GALANDÁKOVÁ, A.; ULRICHOVÁ, J.; LANGOVÁ, K.; HANÁKOVÁ, A.; VRBKA, M.; HARTL, M.; GALLO, J. Characteristics of synovial fluid required for optimization of lubrication fluid for biotribological experiments. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2016, vol. 105, no. 6, p. 1422-1431. ISSN: 1552-4981.
  Detail

  NEČAS, D.; VRBKA, M.; YARIMITSU, S.; NAKASHIMA, K.; SAWAE, Y.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Frictional properties of PVA hydrogel. In The Latest Methods of Construction Design. Springer International Publishing, 2016. p. 159-164. ISBN: 978-3-319-22761-0.
  Detail

  NEČAS, D.; VRBKA, M.; URBAN, F.; KŘUPKA, I.; HARTL, M. The effect of lubricant constituents on lubrication mechanisms in hip joint replacements. Journal of the Mechanical Behavior of Biomedical Materials, 2016, vol. 55, no. 3, p. 295-307. ISSN: 1751-6161.
  Detail

  TKACHENKO, S.; NEČAS, D.; DATSKEVICH, O.; ČUPERA, J.; SPOTZ, Z.; VRBKA, M.; KULAK, L.; FORET, R. Tribological Performance of Ti-Si-Based in Situ Composites. TRIBOLOGY TRANSACTIONS, 2016, vol. 59, no. 2, p. 340-351. ISSN: 1040-2004.
  Detail

  NEČAS, D.; VRBKA, M.; KŘUPKA, I.; HARTL, M.; GALANDÁKOVÁ, A. Lubrication within hip replacements – Implication for ceramic-on-hard bearing couples. Journal of the Mechanical Behavior of Biomedical Materials, 2016, vol. 61, no. 8, p. 371-383. ISSN: 1751-6161.
  Detail

• 2015

  CHOUDHURY, D.; CHING, H.A.; MAMAT, A.B.; ČÍŽEK, J.; ABU OSMAN, N.A.; VRBKA, M.; HARTL, M.; KŘUPKA, I. Fabrication and characterization of DLC coated microdimples on hip prosthesis heads. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2015, vol. 103, no. 5, p. 1002-1012. ISSN: 1552-4973.
  Detail

  NEČAS, D.; ŠPERKA, P.; VRBKA, M.; KŘUPKA, I.; HARTL, M. Film thickness mapping in lubricated contacts using fluorescence. MM Science Journal, 2015, vol. 4, no. 4, p. 821-824. ISSN: 1803-1269.
  Detail

  VRBKA, M.; NEČAS, D.; HARTL, M.; KŘUPKA, I.; URBAN, F.; GALLO, J. Visualization of lubricating films between artificial head and cup with respect to real geometry. Biotribology, 2015, vol. 1-2, no. 1, p. 61-65. ISSN: 2352-5738.
  Detail

  CHOUDHURY, D.; URBAN, F.; VRBKA, M.; HARTL, M.; KŘUPKA, I. A novel tribological study on DLC-coated micro-dimpled Orthopedics implant interface. Journal of the Mechanical Behavior of Biomedical Materials, 2015, vol. 2015, no. 45, p. 121-131. ISSN: 1751-6161.
  Detail

  NEČAS, D.; VRBKA, M.; URBAN, F.; KŘUPKA, I.; HARTL, M.; GALLO, J. An experimental investigation of lubricant film formation in artificial hip joints. Proceedings of The 8th International Biotribology Forum and The 36th Biotribology Symposium. Yokohama: 2015. p. 73-74.
  Detail

  VRBKA, M.; NEČAS, D.; BARTOŠÍK, J.; HARTL, M.; KŘUPKA, I.; GALANDÁKOVÁ, A.; GALLO, J. Stanovení součinitele tření hlavic a jamek TEP kyčle. Acta Chirurgiae Orthopaedicae et Traumatologiae Cechoslovaca, 2015, roč. 82, č. 5, s. 341-347. ISSN: 0001-5415.
  Detail

  URBAN, F.; NEČAS, D.; VRBKA, M.; KŘUPKA, I.; HARTL, M. In Situ Observation of Lubricant Film within Artificial Hip Joints. Tokyo: Japanese Society of Tribologists, 2015. p. 860-861.
  Detail

• 2014

  NEČAS, D.; VRBKA, M.; YARIMITSU, S.; NAKASHIMA, K.; SAWAE, Y.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Frictional Properties of PVA Hydrogel. In 55th International Conference of Machine Design Departments. 2014. p. 147-152. ISBN: 978-80-01-05542-7.
  Detail

  VRBKA, M.; KŘUPKA, I.; HARTL, M.; NÁVRAT, T.; GALLO, J.; GALANDÁKOVÁ, A. In situ measurements of thin films in bovine serum lubricated contacts using optical interferometry. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2014, vol. 228, no. 2, p. 149-158. ISSN: 0954-4119.
  Detail

  NEČAS, D.; VRBKA, M.; ŠPERKA, P.; DRUCKMÜLLER, M.; SKLÁDAL, P.; ŠTARHA, P.; KŘUPKA, I.; HARTL, M. Qualitative Analysis of Film Thickness in Rolling EHD Contact by Fluorescence Technique. In Modern Methods of Construction Design. Lecture Notes in Mechanical Engineering. Springer International Publishing, 2014. p. 615-622. ISBN: 978-3-319-05202-1. ISSN: 2195-4356.
  Detail

  TKACHENKO, S.; NEČAS, D.; DATSKEVICH, O.; ČUPERA, J.; SPOTZ, Z.; VRBKA, M.; KULAK, L.; FORET, R. Tribological behavior of Ti–Si based in situ composites under sliding. In Metal 2014. Ostrava: Tanger Ltd., 2014. p. 2704-2709. ISBN: 978-80-87294-52-9.
  Detail

• 2013

  VRBKA, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M.; ŠPERKA, P.; GALLO, J. Study of film formation in bovine serum lubricated contacts under rolling/sliding conditions. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2013, vol. 227, no. 5, p. 459-475. ISSN: 1350-6501.
  Detail

  NÁVRAT, T.; VRBKA, M.; LAŠTŮVKA, J.; KŘUPKA, I.; HARTL, M.; GALLO, J. Effect of contact condition on film thickness formation in artificial joints. In Mechatronics 2013. Springer International Publishing Switzerland: Springer International Publishing, 2013. p. 863-868. ISBN: 978-3-319-02293-2.
  Detail

  VRBKA, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M.; GALLO, J. MAPPING OF FILM THICKNESS IN BOVINE SERUM LUBRICATED CONTACTS. Engineering Mechanics, 2013, vol. 20, no. 1, p. 27-41. ISSN: 1802-1484.
  Detail

  NEČAS, D.; VRBKA, M.; ŠPERKA, P.; DRUCKMÜLLER, M.;SKLÁDAL, P.; ŠTARHA, P.; KŘUPKA, I.; HARTL, M. Qualitative Analysis of Film Thickness in Rolling EHD Contact by Fluorescence Technique. In Book of Proceedings of 54th International Conference of Machine Design Departments. Springer, 2013. p. 513-520. ISBN: 978-80-7372-986-8.
  Detail

  VRBKA, M.; KŘUPKA, I.; HARTL, M.; GALLO, J. Study of lubricating mechanisms in artificial hip joints. In 5th World Tribology Congress, WTC 2013. 1. Torino, Italy: Politecnico di Torino (DIMEAS), 2013. p. 467-469. ISBN: 9781634393522.
  Detail

  GALLO, J.; HARTL, M.; VRBKA, M.; NÁVRAT, T.; KŘUPKA, I. Co by měl vědět ortoped o biotribologii totální endoprotézy kyčelního kloubu. Acta Chirurgiae Orthopaedicae et Traumatologiae Cechoslovaca, 2013, roč. 80, č. 6, s. 377-385. ISSN: 0001-5415.
  Detail

• 2012

  BOSÁK, D.; LAŠTŮVKA, J.; VRBKA, M.; NÁVRAT, T.; HARTL, M.; KŘUPKA, I. MAPPING OF LUBRICATING FILM THICKNESS IN HUMAN HIP JOINT REPLACEMENTS. MM Science Journal, 2012, vol. 2012, no. 12, p. 378-381. ISSN: 1803-1269.
  Detail

  VRBKA, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M.; GALLO, J. EFFECT OF PROTEINS ON FILM FORMATION IN BOVINE SERUM LUBRICATED CONTACTS UNDER ROLLING/SLIDING CONDITIONS. In ASME/STLE 2012 Joint Tribology Conference (IJTC2012). 1. Denver, Colorado, USA: ASME, 2012. p. 1-3. ISBN: 978-0-7918-4508-0.
  Detail

  VRBKA, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M.; GALLO, J.; ADAM, T. Effect of Proteins on Film Formation in Bovine Serum Lubricated Contacts. In 15th Nordic Symposium on Tribology (NORDTRIB 2012). 1. Trondheim, Norway: Norwegian University of Science and Technology, 2012. p. 91-91. ISBN: 978-82-14-05270-1.
  Detail

  LAŠTŮVKA, J.; BOSÁK, D.; NÁVRAT, T.; VRBKA, M. Effect of Slide-to-roll Ratio on Film Thickness Formation in Bovine Serum Lubricated Contact. In Proceedings of the 50th Anuual Conference on Experimental Stress Analysis. Praha: Czech Technical University in Prague, 2012. p. 247-252. ISBN: 978-80-01-05060-6.
  Detail

  BOSÁK, D.; LAŠTŮVKA, J.; VRBKA, M.; NÁVRAT, T.; HARTL, M.; KŘUPKA, I. Mapping of lubricating film thickness in human hip joint replacements. In 53rd International Conference of Machine Design Departments. 1. Brno: Brno University of Technology, 2012. p. 45-52. ISBN: 978-80-214-4533-8.
  Detail

• 2011

  VAVERKA, M.; ZAPLETAL, L.; ŠAMÁNEK, O.; VRBKA, M. Influence of Surface Dents on Elastohydrodynamic and Mixed Lubrication. In Engineering Mechanics 2011. 17th international Conference. Brno: IT ASCR, 2011. p. 643-646. ISBN: 978-80-87012-33-8.
  Detail

  VAVERKA, M.; VRBKA, M.; FICZA, I.; ŠPERKA, P. Numerical Investigation of the Influence of Surface Asperities on Tribological Parameters in Lubricated Point Contact. In Proceedings of the International Conference BALTTRIB 2011. Balttrib 2009 Conference proceedings. 6. Kaunas, Litva: Aleksandras Stulginskis University, 2011. no. 1, p. 117-121. ISBN: 978-609-449-006-4. ISSN: 1822-8801.
  Detail

  VRBKA, M.; KŘUPKA, I.; SVOBODA, P.; ŠPERKA, P.; NÁVRAT, T.; HARTL, M.; NOHAVA, J. Effect of shot peening on rolling contact fatigue and lubricant film thickness within mixed lubricated non-conformal rolling/sliding contacts. Tribology International, 2011, vol. 44, no. 12, p. 1726-1735. ISSN: 0301-679X.
  Detail

  SVOBODA, P.; VRBKA, M.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Study of Lubrication Film Formation in Ball Bearings Under Starved Conditions. In ASME/STLE 2011 International Joint Tribology Conference. 1. Los Angeles, CA, USA: American Society of Mechanical Engineers, Tribology Division, TRIB, 2011. p. 183-185. ISBN: 978-0-7918-5474-7.
  Detail

  VRBKA, M.; ZIMMERMAN, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M. Mapping of film thickness in bovine serum lubricated contacts. In International Conference on BioTribology (ICoBT 2011). 1. Londýn: Imperial College, 2011. p. 1-2.
  Detail

• 2010

  VAVERKA, M.; ZAPLETAL, L.; ŠPERKA, P.; VRBKA, M.; SVOBODA, P.; KŘUPKA, I. Vliv povrchových mikronerovností a defektů na rozložení kontaktního tlaku a tloušťky mazacího filmu za podmínek elastohydrodynamického mazání. In Failures of rolling bearings / Poruchy valivých ložísk. Bratislava: KONGRES Management, 2010. s. 55-58. ISBN: 978-80-89275-24-3.
  Detail

  VRBKA, M.; KŘUPKA, I.; HARTL, M.; SVOBODA, P. Effect of Surface Topography Modifications on Rolling Contact Fatigue of Mixed Lubricated Contacts. In Proceedings of a meeting held 16-20 May 2010, Las Vegas, Nevada, USA. Las Vegas, Nevada, USA: STLE, 2010. p. 1-3. ISBN: 9781617387272.
  Detail

  ŠAMÁNEK, O.; ZIMMERMAN, M.; SVOBODA, P.; KŘUPKA, I.; VRBKA, M. Influence of Surface Texturing on Lubricant Film Formation and Surface Fatigue. Engineering Mechanics, 2010, vol. 17, no. 1, p. 27-36. ISSN: 1802-1484.
  Detail

  VRBKA, M.; ŠAMÁNEK, O.; ŠPERKA, P.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M. Effect of surface texturing on rolling contact fatigue within mixed lubricated non-conformal rolling/sliding contacts. Tribology International, 2010, vol. 43, no. 8, p. 1457-1465. ISSN: 0301-679X.
  Detail

  VRBKA, M.; KŘUPKA, I.; ŠAMÁNEK, O.; SVOBODA, P.; VAVERKA, M.; HARTL, M. Effect of surface texturing on lubrication film formation and rolling contact fatigue within mixed lubricated non-conformal contacts. MECCANICA, 2010, vol. 2010, no. 06, p. 1-8. ISSN: 0025-6455.
  Detail

• 2009

  KŘUPKA, I.; HARTL, M.; VRBKA, M.; VAVERKA, M.; POLIŠČUK, R. Effect of surface dents on contact pressure in elastohydrodynamic contacts. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2009, vol. 223, no. 4, p. 683-693. ISSN: 1350-6501.
  Detail

  KŘUPKA, I.; HARTL, M.; VRBKA, M.; VAVERKA, M.; SVOBODA, P.; ŠAMÁNEK, O. The Effect of Surface Texturing on Lubricant Film Thickness and Contact Pressure within Non-Conformal Surfaces. In Ecotrib 2009 - 2nd European Conference on Tribology. 1. Pisa, Italy: Engineering Faculty, University of Pisa, 2009. p. 115-120. ISBN: 978-88-467-2426-7.
  Detail

• 2008

  KŘUPKA, I.; HARTL, M.; VRBKA, M. Effect of surface texturing on mixed lubricated non-conformal contacts. Tribology International, 2008, vol. 41, no. 11, p. 1063-1073. ISSN: 0301-679X.
  Detail

  NÁVRAT, T.; VRBKA, M.; FLORIAN, Z.; ROZKYDAL, Z. Strain-stress analysis of pathological hip joint after osteotomy. Engineering Mechanics, 2008, vol. 15, no. 5, p. 345-354. ISSN: 1802-1484.
  Detail

  VAVERKA, M.; VRBKA, M.; POLIŠČUK, R.; KŘUPKA, I.; HARTL, M. Numerical evaluation of pressure from experimentally measured film thickness in EHL point contact. Lubrication Science, 2008, vol. 20, no. 1, p. 47-59. ISSN: 0954-0075.
  Detail

• 2007

  VRBKA, M.; VAVERKA, M.; POLIŠČUK, R.; KŘUPKA, I.; HARTL, M. Pressure Calculation from Experimentally Evaluated Lubricant Thickness within EHL Contacts. In Proceedings of the ASME/STLE International Joint Tribology Conference 2007. STLE/ASME. San Diego, California, USA: ASME/STLE, 2007. p. 1-3. ISBN: 978-0-7918-4810-4.
  Detail

  POLIŠČUK, R.; VAVERKA, M.; VRBKA, M.; KŘUPKA, I.; HARTL, M. Optimized Mapping of Pressure in Lubricated Point Contacts Based on Measured Film Thickness. In Proceedings of the 2007 International Mechanical Engineering Congress & Exposition. Seattle: ASME, 2007. 6 s. ISBN: 0-7918-3812-9.
  Detail

  VRBKA, M.; PALOUŠEK, D.; BRANDEJS, J. Konference diplomových prací 2007 na FSI. Události na VUT v Brně, 2007, roč. 17, č. 7, s. 21-21. ISSN: 1211-4421.
  Detail

  ŠAMÁNEK, O.; VRBKA, M. Vliv povrchových nerovností na funkci mazaných kontaktů strojních součástí. In Konference diplomových prací 2007. 1. Ústav konstruování, fakulta strojního inženýrství, VUT v Brně: Ústav konstruování, 2007. s. 1-3. ISBN: 978-80-214-3406-6.
  Detail

  ŠEVČÍK, M.; VRBKA, M. Computational modelling of spur gear using FEM. In Konference diplomových prací. 1. Ústav konstruování, Fakulta strojního inženýrství, VUT v Brně: Ústav konstruování, 2007. p. 1-5. ISBN: 978-80-214-3406-6.
  Detail

  PALOUŠEK, D.; KOUTNÝ, D.; PRAŽÁK, F.; VRBKA, M.; VAVERKA, M.; BRANDEJS, J.; HARTL, M. Innovative Approaches to Mechanical Engineering Education at Brno University of Technology. In Proceedings of the International Conferecne on Mechanical Engineering and Mechanics 2007. NJ USA: Science Press USA, 2007. p. 2194-2199. ISBN: 1-933100-21-4.
  Detail

  POKORNÝ, P.; NÁVRAT, T.; KAŠPÁREK, J.; VRBKA, M. Ověření charakteristik ocelového lana závěsu výložníku u věžového jeřábu MB 1030.11. In Zdvíhací zařízení v teorii a praxi 2007. Brno: VUT Brno 2007, 2007. s. 130-133. ISBN: 978-80-214-3391-5.
  Detail

• 2006

  VRBKA, M.; VAVERKA, M. STRAIN-STRESS ANALYSIS OF PHYSIOLOGICAL AND PATHOLOGICAL HIP JOINT OF ADULT HUMAN USING FEM. In Human Biomechanics 2006. Brno: Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. p. 1-7. ISBN: 80-214-3232-2.
  Detail

  POLIŠČUK, R.; VAVERKA, M.; VRBKA, M.; KŘUPKA, I.; HARTL, M. Pressure Distribution Within EHD Point Contacts Based on Measured Film Thickness. In Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition IMECE2006. Chicago, Illinois USA: Pinehurst Technologies, Inc., 2006. 7 p. ISBN: 0-7918-3790-4.
  Detail

  VRBKA, M.; VAVERKA, M.; POLIŠČUK, R.; KŘUPKA, I.; HARTL, M. Vliv mazivostních přísad na tloušťku mazacího filmu v EHD kontaktu. In Mazání v moderním průmyslovém podniku. 1. Praha: Česká strojnická společnost, 2006. s. 90-95. ISBN: 80-02-01808-7.
  Detail

  VAVERKA, M.; VRBKA, M.; KŘUPKA, I.; HARTL, M. Influence of Dents on Friction Surfaces on Thin Lubrication Films. In 15th International Colloquium Tribology - Automotive and Industrial Lubrication. Esslingen, Ostfildern: Technische Akademie Esslingen, Ostfildern, 2006. p. 1-5. ISBN: 3-924813-62-0.
  Detail

  VAVERKA, M.; NÁVRAT, T.; VRBKA, M.; FLORIAN, Z.; FUIS, V. Stress And Strain Analysis of The Hip Joint Using FEM. TECHNOLOGY AND HEALTH CARE, 2006, vol. 14, no. 4-5, p. 271-279. ISSN: 0928-7329.
  Detail

  VAVERKA, M.; VRBKA, M. Finite Element Analysis of Normal And Pathological Hip Joint. In Human Biomechanics 2006. 2006. Hrotovice: FSI VUT Brno, 2006. p. 1-8. ISBN: 80-214-3232-2.
  Detail

  VRBKA, M.; VAVERKA, M.; POLIŠČUK, R.; KŘUPKA, I.; HARTL, M.; URBANEC, L. Evaluation of pressure from film thickness within EHL contact with dented surfaces. In AITC-AIT 2006 5th International Conference of Tribology. Parma, Itálie: 2006. p. 1-11. ISBN: 88-902333-0-3.
  Detail

  NÁVRAT, T.; VRBKA, M.; POKORNÝ, P.; KAŠPÁREK, J. Deformačně-napěťová analýza stavebního věžového jeřábu. In 14. ANSYS Users Meeting 2006. Brno: SVS FEM, 2006. s. 1-8. ISBN: 80-239-7764-4.
  Detail

• 2005

  VRBKA, M., VAVERKA, M. Deformačně napěťová analýza fyziologicky a patologicky vyvinutých kyčelních kloubů dětí a dospělých. In FSI Junior konference 2004. Brno: Fakulta strojního inženýrství, VUT v Brně, 2005. 12 s. ISBN: 80-214-2934-8.
  Detail

• 2004

  VAVERKA, M., VRBKA, M. Výpočtové modelování deformačně-napěťových stavů ve zdravých a patologických kyčelních kloubech. In 12. ANSYS Users’ Meeting. Brno: SVSFEM, 2004. 13 s.
  Detail

  VRBKA, M.; VAVERKA, M.; FLORIAN, Z. Napěťově-deformační analýza fyziologického a patologického kyčelního kloubu. In FSI Junior konference 2003. Brno: FSI VUT v Brně, 2004. s. 1-8. ISBN: 80-214-2619-5.
  Detail

  VRBKA, M. Deformačně napěťová analýza fyziologicky a patologicky vyvinutého kyčelního spojení. Deformačně napěťová analýza fyziologicky a patologicky vyvinutého kyčelního spojení. Vědecké spisy Vysokého učení technického v Brně Edice PhD Thesis. PhD Thesis, sv. 255. Brno: VUT Brno, 2004. s. 1-31. ISBN: 80-214-2694-2. ISSN: 1213-4198.
  Detail

  VRBKA, M.; FLORIAN, Z. Deformačně-napěťová analýza zdravého a dysplastického kyčelního kloubu. In Mechanical Engineering 2004. Bratislava: Faculty of Mechanical Engineering, STU in Bratislava, 2004. 11 s. ISBN: 80-227-2105-0.
  Detail

• 2003

  VRBKA, M., VAVERKA, M., FLORIAN, Z. Sensitivity Analysis of Stress and Strain Fields in Relation to Material Characteristic of Hip Joint. In Mechatronics, Robotics and Biomechanics 2003. Brno: Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno University of Technology, 2003. 2 p. ISBN: 80-214-2312-9.
  Detail

  VAVERKA, M., VRBKA, M., NÁVRAT, T., FLORIAN, Z. Computational Modelling of the Hip in Reference to Clinical Requirements. In Applied Mechanics. Gliwice: Politechnika Slaska, Katedra mechaniky stosovanej, 2003. 6 p. ISBN: 83-917224-3-0.
  Detail

  VAVERKA, M., VRBKA, M., FLORIAN, Z., ONDRUŠ, Š. Analýza deformačně-napěťových poměrů v kyčelním kloubu pomocí MKP. In Výpočtová mechanika 2003 II. Nečtiny: Fakulta aplikovaných věd ZČU v Plzni, 2003. 8 s. ISBN: 80-7082-999-0.
  Detail

  VRBKA, M., VAVERKA, M., FLORIAN, Z., ROZKYDAL, Z. Napěťově-deformační analýza fyziologického a patologického kyčelního kloubu. In Výpočtová mechanika 2003. Plzeň: Fakulta aplikovaných věd, Západočeská universita v Plzni, 2003. 8 s. ISBN: 80-7082-999-0.
  Detail

• 2002

  VAVERKA, M.; VRBKA, M. Deformačně napěťová analýza zdravého a dysplastického kyčelního kloubu. In FSI Junior konference 2002. Brno: FSI VUT v Brně, 2002. 4 s. ISBN: 80-214-2290-4.
  Detail

  VAVERKA, M., VRBKA, M. Vyšetřování deformace a napjatosti v dětském kyčelním spojení na konečnoprvkovém 3D modelu. In Výpočtová mechanika 2002 II. Plzeň: Západočeská Univerzita v Plzni, 2002. 4 s. ISBN: 80-7082-903-6.
  Detail

  VRBKA, M., VAVERKA, M. Computational Model of Hip Osteotomies. In Biomechanics of Man 2002. Praha: Charles University in Prague, Faculty of Physical Education and Sport, 2002. 3 p. ISBN: 80-86317-23-4.
  Detail

  VRBKA, M.; VAVERKA, M. Výpočtové modelování deformačně-napjatostních poměrů ve fyziologicky a patologicky vyvinutých kyčelních kloubech. In Výpočtová mechanika 2002 (Computational Mechanics 2002). Plzeň (Nečtiny): Fakulta aplikovaných věd, Západočeská univerzita v Plzni, 2002. s. 503-510. ISBN: 80-7082-903-6.
  Detail

  VRBKA, M., VAVERKA, M. Mechanická analýza fyziologicky a patologicky vyvinutého kyčelního kloubu metodou konečných prvků. In Skelet 2002. Praha: Fakulta tělesné výchovy a sportu, Universita Karlova a Česká společnost pro biomechaniku pro CBMI, 2002. 1 s. ISBN: 80-86317-19-6.
  Detail

  IVÁN, L.; VRBKA, M.; VAVERKA, M. Vytvoření prostorového modelu geometrie kyčelního spojení. Acta Mechanica Slovaca, 2002, roč. 2002, č. 1, s. 126-126. ISSN: 1335-2393.
  Detail

  VAVERKA, M., VRBKA, M. Řešení kontaktních úloh pomocí MKP a jejich aplikace v biomechanice. In Aplikovaná mechanika 2002. Ostrava: VŠB - Technická univerzita Ostrava, 2002. 8 s. ISBN: 80-248-0079-9.
  Detail

  VRBKA, M.; VAVERKA, M. Deformačně - napjatostní analýza kyčelního kloubu. In FSI Junior konference 2001. Brno: FSI VUT v Brně, 2002. s. 1-4. ISBN: 80-214-2071-5.
  Detail

  VRBKA, M.; VAVERKA, M. Počítačová podpora chirurgickým zákrokům na patologicky vyvinutých kyčelních kloubech. Acta Mechanica Slovaca, 2002, roč. 2002, č. 1, s. 127-127. ISSN: 1335-2393.
  Detail

  VAVERKA, M., VRBKA, M. Strain and Stress Analysis of Children`s Hip by means of FEM. In Biomechanics of Man 2002. Praha: Charles University in Prague, Faculty of Physical Education and Sport, 2002. 3 p. ISBN: 80-86317-23-4.
  Detail

• 2001

  VAVERKA, M., VRBKA, M. 3D-modelling of the hip joint and its strain and stress analysis using FEM. In Mechatronics Robotics and Biomechanics. Brno: CERM akademické nakladatelství, 2001. 8 p. ISBN: 80-7204-207-6.
  Detail

*) Citations are generated once every 24 hours.