Přístupnostní navigace
E-application
Search Search Close
Ing.
Ph.D.
FME, EI DPE – Assistant professor
+420 54114 2580snajdarek@fme.vutbr.cz
Send BUT message
2025
David Nečas, Daniel Němeček, Jan Gregora, David Rebenda, Zuzana Kadlecová, Ivana Chamradová, Monika Trudičová, Pavel Čípek, Petr Čípek, Ladislav Šnajdárek, Lucy Vojtová, Martin Vrbka, Ivan Křupka, Martin Hartl. Toward Cartilage-Mimicking Biomaterials: Biotribological, Biochemical and Structural Evaluation of pHEMA and PVA-Based Hydrogels. ACS Omega, 2025, vol. 10, iss. 51, p. 63441-63454.
WoS Article
2024
IMRICHOVÁ, A.; SOKOLA, P.; MÁSILKO, J.; CÁBA, V.; ŠNAJDÁREK, L.; BALÁŠ, M. Evaluation of the adsorption capacity of dolomite as a promising natural material suitable for CO2 capture. 2024. 2 p.
Abstract
2022
ŠNAJDÁREK, L.; CHÝLEK, R.; POSPÍŠIL, J. Slow thermal decomposition of lignocelluloses compared to numerical model: Fine particle emission, gaseous products analysis. Energy, 2022, iss. 261, p. 1-11. ISSN: 0360-5442.
2021
POLÁČIK, J.; SITEK, T.; POSPÍŠIL, J.; ŠNAJDÁREK, L.; LISÝ, M. Emission of fine particles from residential combustion of wood: Comparison of automatic boiler, manual log feed stove and thermo-gravimetric analysis. Journal of Cleaner Production, 2021, vol. 279, iss. 123664, p. 1-9. ISSN: 0959-6526.
CHÝLEK, R.; KUDELA, L.; POSPÍŠIL, J.; ŠNAJDÁREK, L. Parameters Influencing the Emission of Ultrafine Particles during 3D Printing. International Journal of Environmental Research and Public Health, 2021, vol. 18, iss. 21, p. 11670-11670. ISSN: 1660-4601.
2019
CHÝLEK, R.; KUDELA, L.; POSPÍŠIL, J.; ŠNAJDÁREK, L. Fine particle emission during fused deposition modelling and thermogravimetric analysis for various filaments. Journal of Cleaner Production, 2019, vol. 237, iss. 117790, p. 1-10. ISSN: 0959-6526.
CHÝLEK, R.; KUDELA, L.; POSPÍŠIL, J.; ŠNAJDÁREK, L. Emise aerosolů při tepelném ovlivnění plastů během 3D tisku a termogravimetrické analýze. Sborník XX. výroční konference české aerosolové společnosti. Velké Bílovice: Česká aerosolová společnost, 2019. s. 36.ISBN: 978-80-270-6416-8.
Paper in proceedings outside WoS and Scopus
HRABOVÁ, K.; POLÁČIK, J.; ADAMEC, V.; SCHÜLLEROVÁ, B.; ŠNAJDÁREK, L.; POSPÍŠIL, J. Monitoring of released particles by heating RF polymer for conversion to carbon under inert atmosphere. In NANOCON 2018 - Conference Proceeding, 10th Anniversary International Conference on Nanomaterials - Research and Application 2019. TANGER Ltd., 2019. p. 714-719. ISBN: 978-80-87294-85-7.
Paper in proceedings (conference paper)
2018
POLÁČIK, J.; ŠNAJDÁREK, L.; ŠPILÁČEK, M.; POSPÍŠIL, J.; SITEK, T. Particulate Matter Produced by Micro-Scale Biomass Combustion in an Oxygen-Lean Atmosphere. Energies, 2018, vol. 11, iss. 12, p. 1-10. ISSN: 1996-1073.
CHÝLEK, R.; ŠNAJDÁREK, L.; POSPÍŠIL, J. Vortex Tube: A Comparison of Experimental and CFD Analysis Featuring Different RANS Models. In XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018). MATEC web of conferences. Rajecké Teplice, Slovakia: XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018), 2018. p. 1-12. ISSN: 2261-236X.
ŠPILÁČEK, M.; POLÁČIK, J.; POSPÍŠIL, J.; ŠNAJDÁREK, L.; SITEK, T. Fine Particles Emission from Controlled Combustion of Beech Wood in Laboratory Conditions. Chemical Engineering transactions, 2018, vol. 70, iss. 1, p. 1945-1950. ISSN: 2283-9216.
Scopus Article
POLÁČIK, J.; POSPÍŠIL, J.; ŠNAJDÁREK, L.; SITEK, T. Influence of temperature on the production and size distribution of fine particles released from beech wood samples. In XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018). MATEC web of conferences. 168. 2018. p. 1-9. ISSN: 2261-236X.
2017
TUHOVČÁK, J.; HEJČÍK, J.; JÍCHA, M.; ŠNAJDÁREK, L. Experimental validation of mathematical model for small air compressor. In EPJ Web of Conferences. EPJ Web of Conferences. France: EDP Sciences, 2017. iss. 02133, p. 1-4. ISSN: 2100-014X.
POLÁČIK, J.; POSPÍŠIL, J.; ŠNAJDÁREK, L. Size Distribution of Particulate Matter Emitted During Controlled Temperature Rise of Redwood Sample. TOP 2017 Proceedings of abstract. Bratislava: Slovenská technická univerzita v Bratislave, 2017. p. 60.ISBN: 978-80-227-4731-8.
2016
KRACÍK, P.; ŠNAJDÁREK, L.; LISÝ, M.; BALÁŠ, M.; POSPÍŠIL, J. Correlation of Heat Transfer Coefficient at Sprinkled Tube Bundle. Materiali in Tehnologije, 2016, vol. 50, iss. 4, p. 479-483. ISSN: 1580-2949.
2015
ŠNAJDÁREK, L.; POSPÍŠIL, J.; BRÁZDIL, M. Heat transfer in rotor stator cavity. EPJ Web of Conferences, 2015, vol. 92, iss. 2015, p. 558-562. ISSN: 2100-014X.
2014
BRÁZDIL, M.; ŠNAJDÁREK, L.; KRACÍK, P.; POSPÍŠIL, J. Automatic biomass boiler with an external thermoelectric generator. Acta Polytechnica, 2014, vol. 54, iss. 1, p. 6-9. ISSN: 1210-2709.
ŠNAJDÁREK, L.; KRACÍK, P.; POSPÍŠIL, J. Influence of the Surface Treatment of Tubes on the Heat Transfer in Low Pressure Atmosphere. Key Engineering Materials (print), 2014, vol. 592-593, iss. 2014, p. 525-528. ISSN: 1013-9826.
KRACÍK, P.; ŠNAJDÁREK, L.; POSPÍŠIL, J. Long - Term Liquid Transfer Measurements of Falling Film Heat at Horizontal Tube Bundle. The Holistic Approach to Environment, 2014, vol. 4(2014), iss. 4, p. 181-186. ISSN: 1848-0071.
Peer-reviewed article not indexed in WoS or Scopus
KRACÍK, P.; ŠNAJDÁREK, L.; LISÝ, M.; BALÁŠ, M.; POSPÍŠIL, J. Correlation of Heat Transfer Coefficient at Sprinkled Tube Bundle. Program and Book of Abstracts. 1. Ljubljana, Slovenia: Institute of Metals and Technology, 2014. p. 127.ISBN: 978-961-92518-7-4.
MOSKALÍK, J.; ŠNAJDÁREK, L.; POSPÍŠIL, J. Měření teploty tavení popelovin pomocí termo-gravimetrické analýzy. In Sborník přednášek z konference Energie z biomasy XV. 1. Lednice: VUT v Brně, 2014. s. 100-105. ISBN: 978-80-214-5016-5.
MOSKALÍK, J.; ŠNAJDÁREK, L.; ŠTELCL, O. USAGE OF THERMOGRAVIMETRIC ANALYSIS FOR ENERGETIC. Proceedings of abstract ERIN 2014. 1. Brno: Brno University of Technology, 2014. p. 63.ISBN: 978-80-214-4931-2.
Conference proceedings
2013
KRACÍK, P.; ŠNAJDÁREK, L.; POSPÍŠIL, J. Teorie varu na skrápěném horizontálním trubkovém svazku. In ENERGIE Z BIOMASY XIV: Sborník přednášek z konference Energie z biomasy XIV. 1. Brno: VUT v Brně, 2013. s. 29-34. ISBN: 978-80-214-4775-2.
KRACÍK, P.; ŠNAJDÁREK, L.; POSPÍŠIL, J. Study of Temperature Fields at Sprinkled Smooth and Sandblasted Tube Bundle. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2013. iss. 1, p. 1-8. ISBN: 978-80-260-5375-0. ISSN: 2100-014X.
ŠNAJDÁREK, L.; KRACÍK, P.; POSPÍŠIL, J. SPRINKLED HEAT EXCHANGERS OPERATING AT ATMOSPHERIC PRESSURE. Engineering Mechanics, 2013, vol. 20, iss. 3/4, p. 263-270. ISSN: 1802-1484.
MOSKALÍK, J.; ŠTELCL, O.; ŠNAJDÁREK, L. VYUŽITÍ TERMOGRAVIMETRICKÉ ANALÝZY PRO ZJIŠŤOVÁNÍ VLASTNOSTÍ PALIV. In ENERGIE Z BIOMASY XIV Sborník přednášek z konference Energie z biomasy XIV. Brno: 2013. s. 55-59. ISBN: 978-80-214-4775-2.
2012
ŠNAJDÁREK, L.; KRACÍK, P.; LISÝ, M.; POSPÍŠIL, J. The falling liquid film heat transfer outside horizontal tubes. In Advances in Fluid Mechanics and Heat & Mass Transfer. Istanbul, Turkey: 2012. p. 237-240. ISBN: 978-1-61804-114-2.
KRACÍK, P.; POSPÍŠIL, J.; ŠNAJDÁREK, L. HEAT EXCHANGERS FOR CONDENSATION AND EVAPORATION APPLICATIONS OPERATING IN A LOW PRESSURE ATMOSPHERE. Acta Polytechnica, 2012, vol. 52, iss. 3/2012, p. 48-53. ISSN: 1210-2709.
KRACÍK, P.; ŠNAJDÁREK, L.; POSPÍŠIL, J. Sprinkled Heat Exchangers in Evaporation Mode. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2012. iss. 1, p. 1-6. ISBN: 978-80-7372-912-7. ISSN: 2100-014X.
STAF, M.; ŠNAJDÁREK, L.; HLINČÍK, T. A gasket design suitable for helium circuits of generation IV Gas-Cooled reactors. vol. 200, p. 1-11.
*) Citations are generated once every 24 hours.