doc. Ing.

Daniel Koutný

Ph.D.

FME, IMID DREAT – Head of sub-department

+420 54114 3356
Daniel.Koutny@vut.cz

Send BUT message

doc. Ing. Daniel Koutný, Ph.D.

Publications

  • JAROŠ, J.; DUCHOŇ, M.; VÍCHA, D.; PCHÁLEK, V.; ŠVÁB, Č.; KOUTNÝ, D. TiAl6V4 bistable mechanism produced by Laser Powder Bed Fusion.
    Detail | WWW

  • 2024

    VAVERKA, O.; ČERVINEK, O.; JAROŠ, J.; KOUTNÝ, D.; PANTĚLEJEV, L. Numerical and Experimental Evaluation of Structured Material for Use in Multi-scale Topology Optimization. Advanced Engineering Materials, 2024, vol. 26, no. 13, p. 1-10. ISSN: 1527-2648.
    Detail | WWW

    JAROŠ, J.; VAVERKA, O.; SENCK, S.; KOUTNÝ, D. Influence of Process Energy on the Formation of Imperfections in Body-Centered Cubic Cells with Struts in the Vertical Orientation Produced by Laser Powder Bed Fusion from the Magnesium Alloy WE43. Micromachines, 2024, vol. 15, no. 2, p. 1-16. ISSN: 2072-666X.
    Detail | WWW | Full text in the Digital Library

  • 2023

    JAROŠ, J.; KOUTNÝ, D.; KLAKURKOVÁ, L.; GNEIGER, S.; SENCK, S. Ultrasonic atomization of magnesium alloy AZ61 based on the TIG melting method. Journal of Mechanical Science and Technology, 2023, vol. 37, no. 10, ISSN: 1976-3824.
    Detail | WWW

    FRANKE, J.; KOUTECKÝ, T.; KOUTNÝ, D. Comparison of Sublimation 3D Scanning Sprays in Terms of Their Effect on the Resulting 3D Scan, Thickness, and Sublimation Time. Materials, 2023, vol. 16, no. 18, p. 1-15. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    VÍTEK, P.; HURNÍK, J.; VAVERKA, O.; KOUTNÝ, D. Forging measurement using passive stereo vision. In Proc. SPIE 12618, Optical Measurement Systems for Industrial Inspection XIII, 126181V. SPIE, 2023. p. 126181V-1 (126181V-15 p.)ISBN: 9781510664456.
    Detail | WWW

    NOPOVÁ, K.; JAROŠ, J.; ČERVINEK, O.; PANTĚLEJEV, L.; GNEIGER, S.; SENCK, S.; KOUTNÝ, D. Processing of AZ91D Magnesium Alloy by Laser Powder Bed Fusion. Applied Sciences - Basel, 2023, vol. 13, no. 1, ISSN: 2076-3417.
    Detail | WWW | Full text in the Digital Library

    VESPALEC, A.; PODROUŽEK, J.; BOŠTÍK, J.; MIČA, L.; KOUTNÝ, D. Experimental study on time dependent behaviour of coarse aggregate concrete mixture for 3D construction printing. Construction and building materials, 2023, vol. 376, no. 5, p. 1-12. ISSN: 0950-0618.
    Detail | WWW | Full text in the Digital Library

    ŠMÍD, M.; KOUTNÝ, D.; NEUMANNOVÁ, K.; CHLUP, Z.; NÁHLÍK, L.; JAMBOR, M. Cyclic behaviour and microstructural evolution of metastable austenitic stainless steel 304L produced by laser powder bed fusion. Additive Manufacturing, 2023, vol. 68, no. 1, p. 1-14. ISSN: 2214-8604.
    Detail | WWW | Full text in the Digital Library

    SENCK, S.; HOLZLEITNER, M.; GLINZ, J.; MILORADOVIC, A.; KASTNER, J.; KOUTNY, D.; GNEIGER, S. Wire Arc Additive Manufacturing (WAAM) and microstructural analysis of Magnesium parts. 12th Conference on Industrial Computed Tomography. The e-Journal of Nondestructive Testing. iCT 2023. Fürth, Germany: https://www.ndt.net/, 2023. ISSN: 1435-4934.
    Detail | WWW

    MALÝ, M.; KOUTNÝ, D.; MICHÁLEK, M. Processing of metallic materials by Laser Powder Bed Fusion at elevated temperatures. Metal Additive Manufacturing Conference 2023. October 17 - 19, 2023. WKO, Vienna: Metal Additive Manufacturing Conference 2023, 2023. p. 129-139.
    Detail | WWW

    SLAVÍČEK, J.; FRANKE, J.; JAROŠ, J.; KOUTNÝ, D. Strategies for wire arc additive manufacturing of thin walls and overhangs. Journal of Mechanical Science and Technology, 2023, vol. 37, no. 1, p. 5529-5534. ISSN: 1738-494X.
    Detail | WWW

    JAMBOR, M.; VOJTEK, T.; POKORNÝ, P.; KOUTNÝ, D.; NÁHLÍK, L.; HUTAŘ, P.; ŠMÍD, M. Anomalous fatigue crack propagation behavior in near-threshold region of L-PBF prepared austenitic stainless steel. Materials Science and Engineering A, 2023, vol. 872, no. 144982, ISSN: 0921-5093.
    Detail | WWW

    VESPALEC, A.; PODROUŽEK, J.; KOUTNÝ, D. DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm. Materials, 2023, vol. 16, no. 9, p. 1-17. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

  • 2022

    VAŠÁKOVÁ, K.; PANTĚLEJEV, L.; KOUTNÝ, D. The AlSi9Cu3 Alloy Processed by the Selective Laser Melting Technology. In Proceedings 31st International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd., 2022. p. 792-797. ISBN: 978-80-88365-06-8.
    Detail | WWW

    NOPOVÁ, K.; PANTĚLEJEV, L.; KOUTNÝ, D. Effect of Chemical Composition Change on Mechanical and Microstructural Properties of Aluminum Alloys Processed by Selective Laser Melting. In 31st International Conference on Metallurgy and Materials, METAL 2022. Ostrava: TANGER Ltd., 2022. p. 574-579. ISBN: 978-80-88365-06-8.
    Detail | WWW

    KRČMA, M.; PALOUŠEK, D.; KOUTNÝ, D.; ŠKAROUPKA, D. Method of Multiaxis Three-Dimensional Printing with Intralayer Height Variation for Stairstep Effect Compensation. 3D Printing and Additive Manufacturing, 2022, vol. 9, no. 6, ISSN: 2329-7670.
    Detail | WWW

    MAŠEK, J.; LÖFFELMANN, F.; POPELA, R.; KUBÍK, P.; ŠEBEK, F.; KOUTNÝ, D.; MALÝ, M.; PANTĚLEJEV, L.; PAMBAGUIAN, L. Additive manufacturing capabilities for heat switch technology: Key challenges & knowledge gaps. Lille, Francie: EUCASS association, 2022. p. 1-15.
    Detail | WWW | Full text in the Digital Library

    MALÝ, M.; NOPOVÁ, K.; KLAKURKOVÁ, L.; ADAM, O.; PANTĚLEJEV, L.; KOUTNÝ, D. Effect of Preheating on the Residual Stress and Material Properties of Inconel 939 Processed by Laser Powder Bed Fusion. Materials, 2022, vol. 15, no. 18, ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    HURNÍK, J.; ZATOČILOVÁ, A.; KONEČNÁ, T.; ŠTARHA, P.; KOUTNÝ, D. Multi-view camera system for measurement of heavy forgings. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, vol. 121, no. 11-12, p. 7295-7310. ISSN: 0268-3768.
    Detail | WWW

    NEVRLÝ, J.; FICHTA, M.; JURÍK, M.; NĚMEC, Z.; PROCHÁZKA, P.; KOUTNÝ, D.; RADOVAN, P. NEW SYSTEMS OF ENERGY RECOVERY AND ELECTRIC-HYDRAULIC BATTERY MOBILE DRIVE. MM Science Journal, 2022, vol. 2022, no. October, p. 5795-5800. ISSN: 1803-1269.
    Detail | WWW

    FRANKE, J.; KOUTECKÝ, T.; MALÝ, M.; KALINA, M.; KOUTNÝ, D. Study of process parameters of the atomizer-based spray gun for the application of a temporary matte coating for 3D scanning purposes. MATERIALS CHEMISTRY AND PHYSICS, 2022, vol. 282, no. 15 April 2022, p. 1-16. ISSN: 0254-0584.
    Detail | WWW

    HURNÍK, J.; ZATOČILOVÁ, A.; KOUTNÝ, D.; PALOUŠEK, D. Enhancing the accuracy of forging measurement using silhouettes in images. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2022, vol. 194, no. -, p. 111059-111059. ISSN: 0263-2241.
    Detail | WWW

    VRÁNA, R.; JAROŠ, J.; KOUTNÝ, D.; NOSEK, J.; ZIKMUND, T.; KAISER, J.; PALOUŠEK, D. Contour laser strategy and its benefits for lattice structure manufacturing by selective laser melting technology. Journal of Manufacturing Processes, 2022, vol. 74, no. 1, p. 640-657. ISSN: 1526-6125.
    Detail | WWW | Full text in the Digital Library

    MALÝ, M.; KOUTNÝ, D.; PANTĚLEJEV, L.; PAMBAGUIAN, L.; PALOUŠEK, D. Effect of high-temperature preheating on pure copper thick-walled samples processed by laser powder bed fusion. Journal of Manufacturing Processes, 2022, no. 73, p. 924-938. ISSN: 1526-6125.
    Detail | WWW

    FRANKE, J.; KOUTECKÝ, T.; KOUTNÝ, D. Comparison of Various Sublimation Matte Coating Sprays for the Optical 3D Scanning with a Focus on the Quality of 3D Scans. Optics, Photonics and Lasers: Proceedings of the 5th International Conference on Optics, Photonics and Lasers (OPAL' 2022). Barcelona, Spain: International Frequency Sensor Association (IFSA) Publishing, 2022. p. 45-47. ISBN: 978-84-09-40460-5.
    Detail

    GNEIGER, S.; KOUTNÝ, D.; SENCK, S.; SCHNALL, M.; PAPENBERG, N.; KLEIN, T. Wire-Based Additive Manufacturing of Magnesium Alloys. In Magnesium Technology 2022. The Minerals, Metals & Materials Series. 1. CHAM: SPRINGER INTERNATIONAL PUBLISHING AG, 2022. p. 175-179. ISBN: 978-3-030-92533-8. ISSN: 2367-1181.
    Detail | WWW

    LOVAŠIOVÁ, P.; LOVAŠI, T.; KUBÁSEK, J.; JABLONSKÁ, E.; MSALLAMOVÁ, Š.; MICHALCOVÁ, A.; VOJTĚCH, D.; SUCHÝ, J.; KOUTNÝ, D.; ALZUBI, E. Biodegradable WE43 Magnesium Alloy Produced by Selective Laser Melting: Mechanical Properties, Corrosion Behavior, and In-Vitro Cytotoxicity. Metals, 2022, vol. 12, no. 3, ISSN: 2075-4701.
    Detail | WWW | Full text in the Digital Library

    VRÁNA, R.; KOUTECKÝ, T.; ČERVINEK, O.; ZIKMUND, T.; PANTĚLEJEV, L.; KAISER, J.; KOUTNÝ, D. Deviations of the SLM produced Lattice Structures and Their Influence on Mechanical properties. Materials, 2022, vol. 15, no. 9, p. 1-20. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    ČERVINEK, O.; PETTERMANN, H.; TODT, M.; KOUTNÝ, D.; VAVERKA, O. Non-linear dynamic finite element analysis of micro-strut lattice structures made by laser powder bed fusion. Journal of Materials Research and Technology, 2022, vol. 18, no. 1, p. 3684-3699. ISSN: 2238-7854.
    Detail | WWW | Full text in the Digital Library

  • 2021

    ČERVINEK, O.; WERNER, B.; KOUTNÝ, D.; VAVERKA, O.; PANTĚLEJEV, L.; PALOUŠEK, D. Computational Approaches of Quasi-Static Compression Loading of SS316L Lattice Structures Made by Selective Laser Melting. Materials, 2021, vol. 14, no. 9, p. 1-24. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    SUCHÝ, J.; KLAKURKOVÁ, L.; MAN, O.; REMEŠOVÁ, M.; HORYNOVÁ, M.; PALOUŠEK, D.; KOUTNÝ, D.; KRIŠTOFOVÁ, P.; VOJTĚCH, D.; ČELKO, L. Corrosion behaviour of WE43 magnesium alloy printed using selective laser melting in simulation body fluid solution. Journal of Manufacturing Processes, 2021, vol. 69, no. 1, p. 556-566. ISSN: 1526-6125.
    Detail | WWW

    B. Werner, O. Červinek, D. Koutný, A. Reisinger, H.E. Pettermann, M. Todt. Numerical and experimental study on the collapse of a triangular cell under. International Journal of Solids and Structures, 2021, vol. 236, no. 76, p. 1-12. ISSN: 0020-7683.
    Detail | WWW

    HERNANDEZ TAPIA, L.; CARRANZA-TREJO, A.; KASHIMBETOVA, A.; TKACHENKO, S.; KOLEDOVÁ, Z.; KOUTNÝ, D.; MALÝ, M.; ČELKO, L.; MONTUFAR JIMENEZ, E. Microstructure of Selective Laser Melted Titanium Lattices and In Vitro Cell Behaviour. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1179-1185. ISBN: 978-80-87294-99-4.
    Detail | WWW | Full text in the Digital Library

  • 2020

    ZVONÍČEK, J.; KOUTNÝ, D.; PANTĚLEJEV, L.; PALOUŠEK, D. Development of Process Parameters for SLM Processing of AlSi7Mg Aluminum Alloy. In Current Methods of Construction Design. 2020. Springer International Publishing, 2020. p. 515-524. ISBN: 978-3-030-33145-0.
    Detail | WWW

    VRÁNA, R.; VAVERKA, O.; KOUTNÝ, D.; DOČEKALOVÁ, K.; PALOUŠEK, D. SHAPE AND DIMENSIONAL ANALYSIS OF LATTICE STRUCTURES PRODUCED BY SELECTIVE LASER MELTING. MM Science Journal, 2020, vol. 2020, no. 2, p. 3938-3942. ISSN: 1803-1269.
    Detail | WWW

    SUCHÝ, J.; PANTĚLEJEV, L.; PALOUŠEK, D.; KOUTNÝ, D.; KAISER, J. Processing of AlSi9Cu3 alloy by selective laser melting. POWDER METALLURGY, 2020, vol. 63, no. 3, p. 197-211. ISSN: 0032-5899.
    Detail | WWW

    NEVRLÝ, J.; FICHTA, M.; JURÍK, M.; NĚMEC, Z.; KOUTNÝ, D.; VOREL, P.; PROCHÁZKA, P. Battery electric drive of excavator designed with support of computer modeling and simulation. Proceedings, 2020, vol. 58, no. 25, p. 1-18. ISSN: 2504-3900.
    Detail | WWW

    SUCHÝ, J.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; PALOUŠEK, D.; KOUTNÝ, D.; ČELKO, L. Effect of Laser Parameters on Processing of Biodegradable Magnesium Alloy WE43 via Selective Laser Melting Method. Materials, 2020, vol. 13, no. 11, p. 1-17. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    MONTUFAR JIMENEZ, E.; TKACHENKO, S.; CASAS LUNA, M.; ŠKARVADA, P.; SLÁMEČKA, K.; DÍAZ DE LA TORRE, S.; KOUTNÝ, D.; PALOUŠEK, D.; KOLEDOVÁ, Z.; HERNÁNDEZ-TAPIA, L.; ZIKMUND, T.; ČELKO, L.; KAISER, J. Benchmarking of additive manufacturing technologies for commercially-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. Additive Manufacturing, 2020, vol. 36, no. 101516, p. 1-13. ISSN: 2214-8604.
    Detail | WWW

  • 2019

    VAVERKA, O.; ZABLOUDIL, J.; KOUTNÝ, D.; PANTĚLEJEV, L.; PALOUŠEK, D.; DOČEKALOVÁ, K. Effect Of Heat Treatment On Mechanical Properties Of AlSi7Mg0,6 Aluminium Alloy Processed By SLM. In Euro PM2019 Proceedings. Maastricht: European Powder Metallurgy Association (EPMA), 2019. p. 1-6. ISBN: 978-1-899072-51-4.
    Detail | WWW

    PALOUŠEK, D.; KOČICA, M.; PANTĚLEJEV, L.; KLAKURKOVÁ, L.; ČELKO, L.; KOUTNÝ, D.; KAISER, J. SLM process parameters development of Cu-alloy Cu7.2Ni1.8Si1Cr. RAPID PROTOTYPING JOURNAL, 2019, vol. 25, no. 2, p. 266-276. ISSN: 1355-2546.
    Detail | WWW

    ZIKMUND, T.; ŠALPLACHTA, J.; ZATOČILOVÁ, A.; BŘÍNEK, A.; PANTĚLEJEV, L.; ŠTĚPÁNEK, R.; KOUTNÝ, D.; PALOUŠEK, D.; KAISER, J. Computed tomography based procedure for reproducible porosity measurement of additive manufactured samples. NDT & E INTERNATIONAL, 2019, vol. 103, no. 1, p. 111-118. ISSN: 1879-1174.
    Detail | WWW

    VAVERKA, O.; KOUTNÝ, D.; PALOUŠEK, D. Topologically optimized axle carrier for Formula Student produced by selective laser melting. RAPID PROTOTYPING JOURNAL, 2019, vol. 25, no. 9, p. 1545-1551. ISSN: 1355-2546.
    Detail | WWW

    VRÁNA, R.; VAVERKA, O.; ČERVINEK, O.; PANTĚLEJEV, L.; HURNÍK, J.; KOUTNÝ, D.; PALOUŠEK, D. Heat Treatment of the SLM Processed Lattice Structure Made of AlSi10Mg and Its Effect on the Impact Energy Absorption. In Euro PM2019 Proceedings. Maastricht: 2019. p. 1-6. ISBN: 978-1-899072-51-4.
    Detail | WWW

    MALÝ, M.; HÖLLER, C.; SKALON, M.; MEIER, B.; KOUTNÝ, D.; PICHLER, R.; SOMMITSCH, C.; PALOUŠEK, D. Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting. Materials, 2019, vol. 12, no. 6, p. 1-13. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    VRÁBEL, J.; POŘÍZKA, P.; KLUS, J.; PROCHAZKA, D.; NOVOTNÝ, J.; KOUTNÝ, D.; PALOUŠEK, D.; KAISER, J. Classification of materials for selective laser melting by laser-induced breakdown spectroscopy. Chemical Papers, 2019, vol. 1, no. 10, p. 2897-2905. ISSN: 1336-9075.
    Detail | WWW

  • 2018

    VAVERKA, O.; KOUTNÝ, D.; VRÁNA, R.; PANTĚLEJEV, L.; PALOUŠEK, D. Effect of heat treatment on mechanical properties and residual stresses in additively manufactured parts. In ENGINEERING MECHANICS 2018. Engineering Mechanics 2018. Praha: Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, 2018. p. 897-900. ISBN: 978-80-86246-88-8. ISSN: 1805-8256.
    Detail | WWW | Full text in the Digital Library

    KOUTNÝ, D.; PALOUŠEK, D.; PANTĚLEJEV, L.; TĚŠICKÝ, L.; KAISER, J. Influence of Scanning Strategies on Processing of Aluminum Alloy EN AW 2618 Using Selective Laser Melting. Materials, 2018, vol. 11, no. 2, p. 1-18. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    PANTĚLEJEV, L.; ŠTĚPÁNEK, R.; KOUTNÝ, D.; PALOUŠEK, D. Mechanical properties of AlSi10Mg alloy processed by SLM. Materials Engineering - Materiálové inžinierstvo (online version), 2018, vol. 24, no. 4, p. 108-114. ISSN: 1338-6174.
    Detail

    VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D.; PANTĚLEJEV, L.; JAROŠ, J.; ZIKMUND, T.; KAISER, J. Selective Laser Melting Strategy for Fabrication of Thin Struts Usable in Lattice Structures. Materials, 2018, vol. 11, no. 9, p. 1-20. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    VRÁNA, R.; VOSYNEK, P.; KOUTNÝ, D.; NÁVRAT, T.; PALOUŠEK, D. Evaluation of mechanical behavior of 3D printed lattice structure by SLM: Experiment and FEA. In Experimental Stress Analysis - 56th International Scientific Conference. Czech Society for Mechanics, 2018. p. 443-449. ISBN: 978-80-270-4062-9.
    Detail | WWW

    KOUTNÝ, D.; SKULINA, D.; PANTĚLEJEV, L.; PALOUŠEK, D.; LENCZOWSKI, B.; PALM, F.; NICK, A. Processing of Al-Sc aluminum alloy using SLM technology. In 10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES. Procedia CIRP. Elsevier BV, 2018. p. 44-48. ISSN: 2212-8271.
    Detail | WWW

    MAŠEK, J.; KOUTNÝ, D.; POPELA, R. Thermal conductivity of Cu7.2Ni1.8Si1Cr Copper alloy produced via SLM and ability of thin-wall structure fabrication. In 13th Research and Education in Aircraft Design Conference. READ 2018, Brno, ČR: Brno University of Technology, 2018. p. 119-129. ISBN: 978-80-214-5696-9.
    Detail | WWW

    PALOUŠEK, D.; KOUTNÝ, D.; SŮKAL, J. The effect of recycling powder steel on porosity and surface roughness of SLM parts. MM Science Journal, 2018, no. 5, p. 2643-2647. ISSN: 1805-0476.
    Detail | WWW

    KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P.; KOUTNÝ, D. FATIGUE PROPERTIES OF ADDITIVELY MANUFACTURED COPPER ALLOY. In Metal 2017 - 26th Internation Conference on Metallurgy and Materials, Conference Proceedings. TANGER LTD., 2018. p. 1593-1598. ISBN: 9788087294796.
    Detail

    VRÁNA, R.; ČERVINEK, O.;MAŇAS, P.; KOUTNÝ, D.; PALOUŠEK, D. Dynamic Loading of Lattice Structure Made by Selective Laser Melting-Numerical Model with Substitution of Geometrical Imperfections. Materials, 2018, vol. 11, no. 11, p. 1-21. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

  • 2017

    PANTĚLEJEV, L.; KOUTNÝ, D.; PALOUŠEK, D.; KAISER, J. Mechanical and microstructural properties of 2618 Al-alloy processed by SLM remelting strategy. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications, 2017. p. 343-349. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail

    SKALICKÝ, P.; KOUTNÝ, D.; PANTĚLEJEV, L.; PALOUŠEK, D. Processing of Aluminum Alloy EN AW 7075 Using Selective Laser Melting: Initial Study. In PROCEEDINGS OF 58TH INTERNATIONAL CONFERENCE OF MACHINE DESIGN DEPARTMENTS (ICMD 2017). PRAGUE, CZECH REPUBLIC: ZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2017. p. 330-335. ISBN: 978-80-213-2769-6.
    Detail

    PALOUŠEK, D.; PANTĚLEJEV, L.; ZIKMUND, T.; KOUTNÝ, D. PROCESSING OF NEARLY PURE IRON USING 400W SELECTIVE LASER MELTING – INITIAL STUDY. MM Science Journal, 2017, vol. 2017, no. 1, p. 1-6. ISSN: 1803-1269.
    Detail | WWW

  • 2016

    ZATOČILOVÁ, A.; ZIKMUND, T.; KAISER, J.; PALOUŠEK, D.; KOUTNÝ, D. Measurement of the porosity of additive-manufactured Al-Cu alloy using x-ray computed tomography. In 8th International Conference on Materials Structure and Micromechanics of Fracture, MSMF8; Brno; Czech Republic; 27 July 2016 through 29 July 2016; Code 188189. Solid State Phenomena. 2016. p. 448-451. ISBN: 9783038356264. ISSN: 1662-9779.
    Detail

    KOUTNÝ, D.; PANTĚLEJEV, L.; TOMEŠ, J.; PALOUŠEK, D. COMPARISON OF SELECTIVE LASER MELTING OF 18NI MARAGING STEEL BY PXL AND M2 CUSING. MM Science Journal, 2016, vol. 2016, no. 6, p. 1590-1596. ISSN: 1803-1269.
    Detail | WWW

    VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D.; ZIKMUND, T. Influence of Selective Laser Melting Process Parameters on Impact Resistance of Lattice Structure made from AlSi10Mg. In World PM2016 Proceedings. Hamburg, Germany: 2016. p. 1-6. ISBN: 978-1-899072-48-4.
    Detail | WWW

    VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D. Impact Resistance of Different Types of Lattice Structures manufactured by SLM. MM Science Journal, 2016, vol. 2016, no. 6, p. 1579-1585. ISSN: 1803-1269.
    Detail | WWW

    VLAŠIC, F.; KRATOCHVÍLOVÁ, V.; MAZAL, P.; PALOUŠEK, D.; KOUTNÝ, D. Fatigue Damage of Aluminium Alloy EN AW 2618A Produced by SLM Technology. In World PM2016 Proceedings. 2016. European Powder Metallurgy Associtation, 2016. p. 1-6. ISBN: 978-1-899072-48-4.
    Detail | WWW

  • 2015

    PALOUŠEK, D.; OMASTA, M.; KOUTNÝ, D.; BEDNÁŘ, J.; DOKOUPIL, F.; KOUTECKÝ, T. Effect of matte coating on 3D optical measurement accuracy. OPTICAL MATERIALS, 2015, vol. 40, no. 1, p. 1-9. ISSN: 0925-3467.
    Detail

    KOUTNÝ, D.; PALOUŠEK, D.; KOUKAL, O.; ZIKMUND, T.; PANTĚLEJEV, L.; DOKOUPIL, F. Processing of High Strength Al-Cu alloy Using 400W Selective Laser Melting – Initial Study. In Lasers in Manufacturing 2015 Proceedings. Bochum: German Scientific Laser Society, 2015. p. 1-11.
    Detail | WWW

    VRÁNA, R.; PALOUŠEK, D.; KOUTNÝ, D.; KOUKAL, O.; ZIKMUND, T.; KREJČÍ, P. Impact resistance of lattice structure made by Selective Laser Melting technology. In Euro PM2015 Proceedings. Reims, France: 2015. p. 1-6. ISBN: 978-1-899072-47- 7.
    Detail | WWW

    VRÁNA, R.; KOUKAL, O.; KOUTNÝ, D.; PALOUŠEK, D.; KREJČÍ, P. Device for Testing Impact Resistance of Lattice Structures Panels Produced by the Selective Laser Melting. In Machine Design: 56th International Conference of Machine Design Departments. 2015. ISBN: 978-3-639-66914- 5.
    Detail

    KOUKAL, O.; KOUTNÝ, D.; PALOUŠEK, D.; VRÁNA, R.; ZIKMUND, T.; PANTĚLEJEV, L. Research about the Influence of Process Parameters of Selective Laser Melting on Material EN AW 2618. In Euro PM2015 Proceedings. Reims, France: 2015. p. 1-6. ISBN: 978-1-899072-47- 7.
    Detail | WWW

    VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D.; ZIKMUND, T. Impact Resistance of Lattice Structure Made By Selective Laser Melting From Alsi12 Alloy. MM Science Journal, 2015, vol. 2015, no. 4, p. 852-855. ISSN: 1805-0476.
    Detail

    VRÁNA, R.; KOUKAL, O.; KOUTNÝ, D.; PALOUŠEK, D.; KREJČÍ, P. Device for Testing Impact Resistance of Lattice Structures Panels Produced by the Selective Laser Melting. In Book of Proceedings of 56th International Conference of Machine Design Department. První. 2015. p. 144-149. ISBN: 978-80-552-1377- 4.
    Detail

  • 2014

    PALOUŠEK, D.; KOUTNÝ, D.; NÁVRAT, T. Pilot study of the wrist orthosis design process. RAPID PROTOTYPING JOURNAL, 2014, vol. 20, no. 1, p. 27-32. ISSN: 1355-2546.
    Detail

    PALOUŠEK, D.; KOUTNÝ, D. Use of Digital Technologies for Nasal Prosthesis Manufacturing. PROSTHETICS AND ORTHOTICS INTERNATIONAL, 2014, vol. 38, no. 2, p. 171-175. ISSN: 0309-3646.
    Detail | WWW

    KOUTNÝ, D.; VRÁNA, R.; PALOUŠEK, D. Dimensional accuracy of single beams of AlSi10Mg alloy and 316L stainless steel manufactured by SLM. In 5th International Conference on Additive Technologies iCAT2014. Ljubljana: Interesansa, 2014. p. 142-147. ISBN: 978-961-281-579- 0.
    Detail | WWW

  • 2013

    ZATOČILOVÁ, A.; KOUTNÝ, D.; PALOUŠEK, D.; BRANDEJS, J. Experimental verification of deformation behavior of towing hitch by optical measurement method. In MODERN METHODS OF CONSTRUCTION DESIGN - Lecture Notes in Mechanical Engineering. 1. Liberec: Technická univerzita v Liberci, 2013. p. 365-374. ISBN: 978-80-7372-986- 8.
    Detail

    KOUTNÝ, D.; PALOUŠEK, D.; STOKLÁSEK, P.; ROSICKÝ, J.; TEPLÁ, L.; PROCHÁZKOVÁ, M.; SVOBODA, Z.; KREJCI, P. The biomechanics of Cycling with Transtibial Prosthesis: A Case Study of a Professional Cyclist. An electronic international Journal of Science, Engineering and Technology, World Academy of Science Engineering and Technology., 2013, vol. 84, no. 72, p. 390-396. ISSN: 2010- 3778.
    Detail | WWW

    ILČÍK, J.; KOUTNÝ, D.; PALOUŠEK, D. Geometrical Accuracy of the Metal Parts Produced by Selective Laser Melting: Initial Tests. In Book of Proceedings of 54th International Conference of Machine Design Departments. 1. Liberec: Technická univerzita v Liberci, 2013. p. 477-486. ISBN: 978-80-7372-986- 8.
    Detail

  • 2012

    KOUTNÝ, D.; PALOUŠEK, D.; KOUTECKÝ, T.; ZATOČILOVÁ, A.; JANDA, M. 3D Digitalization Of The Human Body For Use In Orthotics And Prosthetics. An international Journal of Science, Engineering and Technology, World Academy of Science Engineering and Technology, 2012, vol. 2012, no. 72, p. 1000-1005. ISSN: 2010- 376X.
    Detail

    MINAŘÍKOVÁ, O.; PALOUŠEK, D.; KOUTNÝ, D. Design of upper limb assistive device. Pracovni Lekarstvi, 2012, vol. 64, no. 2- 3, p. 92-98. ISSN: 0032- 6291.
    Detail | WWW

    SEVERA, L.; NEDOMOVÁ, Š.; BUCHAR, J.; HAVLÍČEK, M.; PALOUŠEK, D.; KOUTNÝ, D. On the shape variation of peaches during ripening. Acta Horticulturae, 2012, vol. 2012, no. 962, p. 285-290. ISSN: 0567- 7572.
    Detail

  • 2010

    KOUTNÝ, D.; PALOUŠEK, D.; BRANDEJS, J. Project- oriented learning of mechanical engineering design. In 2010 International Mechanical Engineering Congress and Exposition. Kanada, Vancouver: ASME, 2010. p. 1-7. ISBN: 978-0-7918-3891- 4.
    Detail

  • 2008

    KOUTNÝ, D.; KŘUPKA, I.; HARTL, M. Behavior of lubrication films contaminated by water. In Advances in Automotive Engineering Volume I. 1. Brno: Tribun EU, 2008. p. 186-194. ISBN: 978-80-7399-496- 9.
    Detail

    KŘUPKA, I.; HARTL, M.; KOUTNÝ, D. Behavior of real roughness features within mixed lubricated non- conformal contacts. Tribology International, 2008, vol. 41, no. 12, p. 1153-1160. ISSN: 0301- 679X.
    Detail

  • 2007

    PALOUŠEK, D.; KOUTNÝ, D. Návrh Savoniova rotoru pomocí Autodesk Inventoru a Rapid Prototypingu. In Autodesk Academia Fórum 2006. Brno: Vysoké učení v Brně, Centrum vzdělání a poradenství, 2007. p. 139-144. ISBN: 978-80-214-3335- 9.
    Detail

    ZIMMERMAN, M.; KOUTNÝ, D. Design of mobile tower for wind generator with low power output. In Konference diplomových prací 2007. Brno: 2007. p. 1-5. ISBN: 978-80-214-3406- 6.
    Detail

    PALOUŠEK, D.; KOUTNÝ, D.; PRAŽÁK, F.; VRBKA, M.; VAVERKA, M.; BRANDEJS, J.; HARTL, M. Innovative Approaches to Mechanical Engineering Education at Brno University of Technology. In Proceedings of the International Conferecne on Mechanical Engineering and Mechanics 2007. NJ USA: Science Press USA, 2007. p. 2194-2199. ISBN: 1-933100-21- 4.
    Detail

  • 2005

    KOUTNÝ, D. Tribologické hodnocení materiálů použitých v kontaktu mazaném vodou. In Sborník mezinárodní XLVI. konference kateder částí a mechanizmů strojů. Liberec: Technická univerzita v Liberci, 2005. p. 167-171. ISBN: 80-7083-951- 1.
    Detail

*) Publications are generated once a 24 hours.