study programme

Design and Process Engineering

Faculty: FMEAbbreviation: D-KPI-AAcad. year: 2024/2025

Type of study programme: Doctoral

Study programme code: P0715D270018

Degree awarded: Ph.D.

Language of instruction: English

Accreditation: 18.2.2020 - 18.2.2030

Mode of study

Full-time study

Standard study length

4 years

Programme supervisor

Doctoral Board

Fields of education

Area Topic Share [%]
Mechanical Engineering, Technology and Materials Without thematic area 100

Study aims

The main goal of the doctoral study programme is, in accordance with the Higher Education Act, to train highly qualified and educated professionals who are capable of independent scientific, research and creative activities in the field of design and process engineering. The graduates are equipped with knowledge and skills that enable them to work at Czech or international academic institutions or research institutes. The programme focuses on theoretical knowledge as well as practical experience in the field of doctoral studies. Cooperation with international research institutes is highly supported. The study programme is designed to fulfil demands and meet societal and industry requirements for highly educated and qualified professionals in the fields of design and process engineering.
Doctoral study programme is primarily based on research and creative activities of doctoral students. These activities are intensively supported by student participation in national and international research projects. Research areas include design (analysis, conception, design of machinery, vehicles, machine production and energy) and process engineering (analysis, design and projection of processes in the engineering, transport, energy and petrochemical industries).

Graduate profile

A graduate of the doctoral study programme is a highly qualified expert with broad theoretical knowledge and practical skills, which enables him/her to carry out creative and research activities both independently and/or in a scientific team. The graduate is acquainted with current findings in the field of design and process engineering and is able to apply the knowledge in his/her research or creative activities. The graduate is also able to prepare a research project proposal and to oversee a project. At the same time, the graduate is able to make use of theoretical knowledge and transfer it in practice. Moreover, the graduate can adapt findings from related disciplines, cooperate on interdisciplinary tasks and increase their professional qualifications. The graduate participation in national and international research and cooperation with international research institutions contributes to higher level of their professional competences. This experience allows graduates not only to carry out their own scientific activities, but also to professionally present their results, and to take part in international discussions.
The graduate can demonstrate knowledge and skills in three main areas and the synergy produces great outcomes.
1. Broad theoretical knowledge and practical skills closely related to the topic of the dissertation (see below).
2. Professional knowledge and skills necessary to carry out scientific work, research, and creative activities.
3. Interpersonal and soft skills and competencies - the graduate is able to present their ideas and opinions professionally, is able to present and defend the results of their work and to discuss them and work effectively in a scientific team or to lead a team.
According to the topic of the dissertation, the graduate will acquire highly professional knowledge and skills in mechanical engineering, in particular in design and operation of machines, machinery, engineering processes and vehicles and transport vehicles. Thanks to the broad knowledge and skills, graduates can pursue a career in research institutes in the Czech Republic and abroad, as well as in commercial companies and applied research.

Profession characteristics

A graduate of the doctoral study programme is a highly qualified expert with broad theoretical knowledge and practical skills, which enables him/her to carry out creative and research activities both independently and/or in a scientific team. The graduate is acquainted with state-of-the-art findings in the field of design and process engineering and is able to apply the knowledge in his/her research or creative activities. The graduate is also able to prepare a research project proposal and to oversee a project. At the same time, the graduate can make use of theoretical knowledge and transfer it in practice. Moreover, the graduate can adapt findings from related disciplines, cooperate on interdisciplinary tasks and increase their professional qualifications. The graduate typically finds a job as a researcher, academic personnel, computer scientist or designer. The graduate is also well equipped with skills and competences to perform well in managerial positions.

Fulfilment criteria

See applicable regulations, DEAN’S GUIDELINE Rules for the organization of studies at FME (supplement to BUT Study and Examination Rules)

Study plan creation

The rules and conditions of study programmes are determined by:
BUT STUDY AND EXAMINATION RULES
BUT STUDY PROGRAMME STANDARDS,
STUDY AND EXAMINATION RULES of Brno University of Technology (USING "ECTS"),
DEAN’S GUIDELINE Rules for the organization of studies at FME (supplement to BUT Study and Examination Rules)
DEAN´S GUIDELINE Rules of Procedure of Doctoral Board of FME Study Programmes
Students in doctoral programmes do not follow the credit system. The grades “Passed” and “Failed” are used to grade examinations, doctoral state examination is graded “Passed” or “Failed”.

Availability for the disabled

Brno University of Technology acknowledges the need for equal access to higher education. There is no direct or indirect discrimination during the admission procedure or the study period. Students with specific educational needs (learning disabilities, physical and sensory handicap, chronic somatic diseases, autism spectrum disorders, impaired communication abilities, mental illness) can find help and counselling at Lifelong Learning Institute of Brno University of Technology. This issue is dealt with in detail in Rector's Guideline No. 11/2017 "Applicants and Students with Specific Needs at BUT". Furthermore, in Rector's Guideline No 71/2017 "Accommodation and Social Scholarship“ students can find information on a system of social scholarships.

What degree programme types may have preceded

The doctoral study programme in Design and Process Engineering is focused on providing the highest level of tertiary education and is a continuation of the follow-up Master's study programme in Mechanical Engineering and the Bachelor's study programme in Mechanical Engineering, which are currently accredited and implemented at FME BUT. Graduates of other study programmes interested in studying in the Design and Process Engineering doctoral study programme must prove their level of knowledge corresponding to the above-mentioned study programmes.

Issued topics of Doctoral Study Program

  1. Eco-innovation of rocket propulsion systems by a synergy of hydrogen peroxide and 3D printing

    Liquid rocket propulsion systems, where hydrogen peroxide (HP) serves as an oxidizing agent or monopropellant, offer significant potential for the reduction of environmental impact, and for the simplification of fuel storage and handling processes. However, the use of HP presents specific technical challenges related to its high reactivity and limited stability. One of the possible research directions is the shape optimization of components used in the rocket propulsion system, employing additive manufacturing (3D print) with materials compatible with the HP. The solution can also integrate advanced sensorial and control systems for efficient monitoring and management of HP decomposition, aiming at performance optimization and the enhancement of safety in propulsion systems. Therefore, the goal is to research prospective design proposals through computational simulations and experimental modelling, contributing to the development of more efficient and safer liquid rocket propulsion systems. It is expected that the research will receive support from European Space Agency (ESA) projects, including an opportunity for additional scholarship. The industrial partner is a Czech company OteSpace, s.r.o. As a part of the study, it is expected that the student will actively participate in international scientific conferences abroad and undertake an internship (stay) at a foreign university. These activities represent a significant opportunity for professional networking and acquiring new knowledge and skills. Essential tools and equipment for advanced research will be available to the student, including access to computational fluid dynamics (CFD) software, high-performance computing (HPC) systems, experimental facilities and equipment. The student is also expected to actively participate in experimental investigations related to the research (assembling, setting up, and tuning test apparatus, preliminary water tests, and HP tests).

    Tutor: Klimeš Lubomír, doc. Ing., Ph.D.

Course structure diagram with ECTS credits

Study plan wasn't generated yet for this year.