Course detail

Technical Drawing

FCH-BC_TEKAcad. year: 2024/2025

Introduction is dedicated to creating technical documentation rules, then the student is familiar with the implementation of geometric structures and their applications, with drawing sketches and technical principles of imaging. These principles followed by way of dimensioning the drawings, prescribing their accuracy, shape and position and surface quality of machine parts. The acquired knowledge is used and developed in the chapter devoted to drawing machine parts and joints, and the implementation of engineering drawings. In the second part of the study will be acquainted with CAD systems and then will work with AutoCad. You will learn to use the basic tools of the system.

Language of instruction

Czech

Number of ECTS credits

2

Mode of study

Not applicable.

Entry knowledge

Elementary geometry and work with PC

Rules for evaluation and completion of the course

The condition for passing the composition of the final test (independent work - 60 minutes) consisting in the redrawing two basic views on the draft and create a third view. The work is scored up to 10-points and classified, minimum 5 points is necessary to pass the test.

Aims

The aim of the course is to acquire or enhance technical knowledge and skills needed for reading and drawing technical drawings and diagrams, graphic skills take over and handle the technical idea, that is able to read drawings and create.
Students will be able to:
- Create a sketch of the product in primary and supplementary views
- Understand the technical drawings
- Make a simple drawing with the necessary views, dimensions and necessary cuts.

The CAD system will be able to use basic tools and AutoCad by:
- Understand the technical drawings
- Make the necessary drawing views, dimensions and necessary cuts
- Use layers and reports.

Study aids

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Fořt, P., Kletečka, J.: AutoCad 2010, Computer Press, Brno, 2009 (CS)
Kletečka, J., Fořt, P.: Technické kreslení, Computer Press, Brno 2007 (CS)
SOBEK, E. a j.: Základy konstruování. Návody pro konstrukční cvičení. CERM, Brno 2005. (CS)
Tutoriály společnosti Autodesk: http://www.autodesk.com/autocad-tutorials-csy (CS)

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme BPCP_CHTPO Bachelor's

    specialization CHPL , 1 year of study, summer semester, compulsory-optional
    specialization PCH , 1 year of study, summer semester, compulsory-optional
    specialization BT , 1 year of study, summer semester, compulsory-optional

  • Programme BKCP_CHTPO Bachelor's

    specialization PCH , 1 year of study, summer semester, compulsory-optional
    specialization BT , 1 year of study, summer semester, compulsory-optional
    specialization CHPL , 1 year of study, summer semester, compulsory-optional

  • Programme BKCP_AAEFCH Bachelor's 1 year of study, summer semester, compulsory-optional
  • Programme BKCP_ECHBM Bachelor's 1 year of study, summer semester, compulsory-optional
  • Programme BKCP_CHTM Bachelor's 2 year of study, summer semester, compulsory-optional
  • Programme BKCP_CHTOZP Bachelor's 3 year of study, summer semester, compulsory-optional
  • Programme BPCP_AAEFCH Bachelor's 1 year of study, summer semester, compulsory-optional
  • Programme BPCP_ECHBM Bachelor's 1 year of study, summer semester, compulsory-optional
  • Programme BPCP_CHMA Bachelor's 3 year of study, summer semester, compulsory-optional
  • Programme BPCP_CHTM Bachelor's 2 year of study, summer semester, compulsory-optional
  • Programme BPCP_CHTOZP Bachelor's 3 year of study, summer semester, compulsory-optional

  • Programme BPCP_CHTP Bachelor's

    specialization CHTP , 1 year of study, summer semester, compulsory-optional

  • Programme BKCP_CHTP Bachelor's

    specialization CHTP , 1 year of study, summer semester, compulsory-optional

  • Programme BPCP_MPMU Bachelor's 2 year of study, summer semester, compulsory

Type of course unit

 

Exercise

26 hod., compulsory

Teacher / Lecturer

Syllabus

1. Schema of technical documentation
2. Technical standardization, specification-ISO, CSN
3. Principle of imaging
4. Survey of projection methods.
5. Elemental and common rules for creation drawing
6. Terminology of technical documentation.
7. Imaging at a drawings in civil engineering.
8. Writing and dimensioning
9. Text documents and diagrams.
10 - 13. Options and principles of computer-aided drawing (CAD)