Course detail

Elasticity and Plasticity

FAST-BDA002Acad. year: 2022/2023

Basic principles, concepts and assumptions of the theory of elasticity and plasticity. Deflections. Strains. Stresses. Saint-Venant principle of local action. Linear theory of the elasticity. Material laws, Stress-strain diagram.
Analysis of a straight bar – basic assumptions. The interaction between the internal force components and the stress components, and between the internal force components and the external load. Basic cases of the loads of a bar. Simple tension and compression – the stress, the strain, the deflection. The influence of the temperature and the initial stresses. Simple shearing load. Simple bending load –calculation of the normal (axial) stresses. Design of the bent beams. The deflection of the bent beams. Differential equation of the deformation line. Method of initial parameters a Mohr’s method. Calculation of the tangent stresses – massive and thin-walled cross-sections. The consideration of the shear stress in the bent beam. The centre of the shear. Pure torsion and warping torsion. Free warping – massive circular and non-circular cross-section. Thin-walled closed and opened cross-section.
Composed load cases of the bar. Spatial and biaxial bending. Tension (Compression) and bending in a plane. Eccentric torsion and compression. The core of the section. Design of the beams in the case of the composed (complex) load.
The stability and the bucking strength of the compressed bars. Euler’s solution. The critical force and the critical stress. The strength approach to stability. A bar loaded by a bending and buckling load. The check of the buckling bars.
The theory of the material strength and failure. The stress and strain state in a point of the body. The principal stress at the plane stress problem.

Language of instruction

Czech

Number of ECTS credits

5

Mode of study

Not applicable.

Department

Institute of Structural Mechanics (STM)

Offered to foreign students

Of all faculties

Learning outcomes of the course unit

The student will bring off the objective of the subject oriented to stress, strain, deformations and dimensioning of structures. The outputs and the subject objectives are focused, above all, to stress, deformations and dimensioning of beams, walls and plates, to stability problems, to the plasticity theory, and to the material strength and failure theory.

Prerequisites

Calculation of support reactions. Components of internal forces, differential equilibrium conditions, internal forces diagrams. Solution of basic types of planar beams. Cross-section characteristics of the planar figures. Steiner’s theorem, extreme values of the second moments of area. Member under space loading.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Not applicable.

Assesment methods and criteria linked to learning outcomes

Not applicable.

Course curriculum

1.Basic principles, conceptions and assumptions of the theory of elasticity and plasticity (the material strength). Material laws, working diagrams. The relation between internal forces and the stresses.
2. Simple tension – stress and strain state. More general cases of the tension (compression).
3. Statically indeterminate cases. The influence of the initial stress and the temperature field.
4. Simple shear, the connections strained by shearing.
5. Simple bending. Normal stresses produced by bending. Design and check of bent girders.
6. The differential equation of the deformation line. The integration of the differential thrust equation. The method of initial parameters, Mohr’s method.
7. Shearing stresses in a bent beam. The centre of the shear. Shearing stress in the thin-walled girders. The effect of the shear on the deflection of the beam.
8. Free torsion of a massive and thin-walled cross-section beams(opened and closed).
9. Complex cases of the load of the beam. Spatial and biaxial bending. Tension (compression) and uniaxial bending.
10. Eccentric tension and compression. The calculation of the position of the neutral axis, the core of the section. Design of the girders in a case of the complex load.
11. Buckling strengths and the stability of the compressed bars. Euler’s solution. Critical force and critical stress. The influence of the boundary conditions.
12. The strength approach to stability. A bar loaded by a bending and buckling load. The check of the buckling bars.
13. The stress and strain state in a point of the body. The principal stress at the plane stress problem.

Work placements

Not applicable.

Aims

Stress, strain, deformations and dimensioning of structures

Specification of controlled education, way of implementation and compensation for absences

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Not applicable.

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme BPC-SI Bachelor's

    specialization VS , 2. year of study, winter semester, compulsory

  • Programme BKC-SI Bachelor's, 2. year of study, winter semester, compulsory
  • Programme BPA-SI Bachelor's, 2. year of study, winter semester, compulsory
  • Programme BPC-MI Bachelor's, 2. year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hours, optionally

Teacher / Lecturer

Syllabus

1.Basic principles, conceptions and assumptions of the theory of elasticity and plasticity (the material strength). Material laws, working diagrams. The relation between internal forces and the stresses. 2. Simple tension – stress and strain state. More general cases of the tension (compression). 3. Statically indeterminate cases. The influence of the initial stress and the temperature field. 4. Simple shear, the connections strained by shearing. 5. Simple bending. Normal stresses produced by bending. Design and check of bent girders. 6. The differential equation of the deformation line. The integration of the differential thrust equation. The method of initial parameters, Mohr’s method. 7. Shearing stresses in a bent beam. The centre of the shear. Shearing stress in the thin-walled girders. The effect of the shear on the deflection of the beam. 8. Free torsion of a massive and thin-walled cross-section beams(opened and closed). 9. Complex cases of the load of the beam. Spatial and biaxial bending. Tension (compression) and uniaxial bending. 10. Eccentric tension and compression. The calculation of the position of the neutral axis, the core of the section. Design of the girders in a case of the complex load. 11. Buckling strengths and the stability of the compressed bars. Euler’s solution. Critical force and critical stress. The influence of the boundary conditions. 12. The strength approach to stability. A bar loaded by a bending and buckling load. The check of the buckling bars. 13. The stress and strain state in a point of the body. The principal stress at the plane stress problem.

Exercise

26 hours, compulsory

Teacher / Lecturer

Syllabus

1. Calculation of support reactions. Components of internal forces, differential equilibrium conditions, internal forces diagrams. Cross-section characteristics of the planar figures. Steiner’s theorem, extreme values of 2nd order moments. 2. Simple tension – stress and strain state. More general cases of the tension (compression). 3. Statically indeterminate cases. The influence of the initial stress and the temperature field. 4. Simple bending. Normal stress produced by bending. Design and check of bent girders. 5. Shearing stress in a bent beam. The centre of the shear. Shearing stress in the thin-walled girders. 6. Free warping of a massive and thin-walled (opened and closed) cross-section beams. 7. Complex cases of the load of the beam. Spatial and biaxial bending. 8. Eccentric tension and compression. The calculation of the position of the neutral axis, the core of the section. Design of the girders in a case of the complex load. 9. The differential equation of the deformation line. The integration of the thrust line diff. equation. 10. The method of initial parameters, Mohr’s method. 11. Buckling strengths and the stability of the compressed bars. Euler’s solution. Critical force and critical stress. 12. The strength approach to stability. A bar loaded by a bending and buckling load. The check of the buckling bars. 13. The stress and strain state in a point of the body. The principal stress at the plane stress problem.