Evropská unie - OP VVV PO1 Předaplikační výzkum

- whole funder (2018-06-01 - 2022-05-31)

OP VVV PAV MATERIALY

Czech

Červinek Ondřej, Ing., Ph.D. - fellow researcher
Grygar Filip, Ing. - fellow researcher
Koutecký Tomáš, Ing., Ph.D. - fellow researcher
Koutný Daniel, doc. Ing., Ph.D. - fellow researcher
Ržonca Michal, Ing. - fellow researcher
Šreibr Vít, Ing. - fellow researcher
Vrána Radek, Ing., Ph.D. - fellow researcher
Dlouhý Ivo, prof. Ing., CSc. - principal person responsible

NETME Centre
- (2018-06-01 - 2022-12-31)

VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D.; PANTĚLEJEV, L.; JAROŠ, J.; ZIKMUND, T.; KAISER, J. Selective Laser Melting Strategy for Fabrication of Thin Struts Usable in Lattice Structures. Materials, 2018, vol. 11, no. 9, p. 1-20. ISSN: 1996-1944.
Detail

HAVLÍK, P.; ŘEHOŘEK, L.; DOUBRAVA, M. HODNOCENÍ POUŽITELNOSTI ELEKTRONOVÉHO SVAZKU PRO MODIFIKACI POVRCHOVÝCH VRSTEV NANESENÝCH TECHNOLOGIÍ COLD SPRAY. Proceedings of Abstracts 28th National Conference ON HEAT TREATMENT. Čerčany: Asociace pro tepelné zpracování kovů ECOSOND s.r.o., 2022. ISBN: ISBN 978-80-907043-4.
Detail

KOUTNÝ, D.; SKULINA, D.; PANTĚLEJEV, L.; PALOUŠEK, D.; LENCZOWSKI, B.; PALM, F.; NICK, A. Processing of Al-Sc aluminum alloy using SLM technology. In 10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES. Procedia CIRP. Elsevier BV, 2018. p. 44-48. ISSN: 2212-8271.
Detail

FRIÁK, M.; ZELENÝ, M.; VŠIANSKÁ, M.; HOLEC, D.; ŠOB, M. An Ab Initio Study of Connections between Tensorial Elastic Properties and Chemical Bonds in Sigma5(210) Grain Boundaries in Ni3Si. Materials, 2018, vol. 11, no. 11, p. 2263 (- p.)ISSN: 1996-1944.
Detail

MALÝ, M.; HÖLLER, C.; SKALON, M.; MEIER, B.; KOUTNÝ, D.; PICHLER, R.; SOMMITSCH, C.; PALOUŠEK, D. Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting. Materials, 2019, vol. 12, no. 6, p. 1-13. ISSN: 1996-1944.
Detail

MORAVČÍK, I.; JAN, Č.; DE ALMEIDA GOUVÊA, L.; ČUPERA, J.; GUBÁN, I.; DLOUHÝ, I. Nitrogen Interstitial Alloying of CoCrFeMnNi High Entropy Alloy through Reactive Powder Milling. ENTROPY, 2019, vol. 21, no. 4, p. 1-7. ISSN: 1099-4300.
Detail

STRECKER, Z.; KUBÍK, M.; VÍTEK, P.; ROUPEC, J.; PALOUŠEK, D.; ŠREIBR, V. Structured magnetic circuit for magnetorheological damper made by selective laser melting technology. SMART MATERIALS & STRUCTURES, 2019, vol. 28, no. 55016, p. 1-13. ISSN: 0964-1726.
Detail

PRAJZLER, V.; PRŮŠA, S.; MACA, K. Rapid pressure-less sintering of fine grained zirconia ceramics: Explanation and elimination of a core-shell structure. Journal of the European Ceramic Society, 2019, vol. 39, no. 16, p. 5309-5319. ISSN: 0955-2219.
Detail

VRÁNA, R.; VAVERKA, O.; ČERVINEK, O.; PANTĚLEJEV, L.; HURNÍK, J.; KOUTNÝ, D.; PALOUŠEK, D. Heat Treatment of the SLM Processed Lattice Structure Made of AlSi10Mg and Its Effect on the Impact Energy Absorption. In Euro PM2019 Proceedings. Maastricht: 2019. p. 1-6. ISBN: 978-1-899072-51-4.
Detail

ŠEVEČEK, O.; PAPŠÍK, R.; MAJER, Z.; KOTOUL, M. Influence of the cell geometry on the tensile strength of open-cell ceramic foams. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. Itálie: Elsevier, 2020. p. 553-558. ISSN: 2452-3216.
Detail

ČÍŽEK, J.; VILÉMOVÁ, M.; LUKÁČ, F.; KOLLER, M.; KONDAS, J.; SINGH, R. Cold Sprayed Tungsten Armor for Tokamak First Wall. Coatings, MDPI, 2019, vol. 9, no. 12, p. 1-15. ISSN: 2079-6412.
Detail

SUCHÝ, J.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; PALOUŠEK, D.; KOUTNÝ, D.; ČELKO, L. Effect of Laser Parameters on Processing of Biodegradable Magnesium Alloy WE43 via Selective Laser Melting Method. Materials, 2020, vol. 13, no. 11, p. 1-17. ISSN: 1996-1944.
Detail

HORNÍK, V.; FINTOVÁ, S.; ŠMÍD, M.; HUTAŘ, P.; HRBÁČEK, K.; KUNZ, L. Interaction of fatigue and creep in MAR-M 247 superalloy. Procedia Structural Integrity, 2020, vol. 23, no. 1, p. 197-202. ISSN: 2452-3216.
Detail

HORNÍK, V.; FINTOVÁ, S.; ŠMÍD, M.; HUTAŘ, P.; HRBÁČEK, K.; KUNZ, L. Fatigue properties of B1914 superalloy at high temperatures. Procedia Structural Integrity, 2020, vol. 23, no. 1, p. 191-196. ISSN: 2452-3216.
Detail

MACHŮ, Z.; ŠEVEČEK, O.; HADAŠ, Z.; KOTOUL, M. Modeling of electromechanical response and fracture resistance of multilayer piezoelectric energy harvester with residual stresses. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2020, vol. 31, no. 19, p. 2261-2287. ISSN: 1530-8138.
Detail

SUCHÝ, J.; PANTĚLEJEV, L.; PALOUŠEK, D.; KOUTNÝ, D.; KAISER, J. Processing of AlSi9Cu3 alloy by selective laser melting. POWDER METALLURGY, 2020, vol. 63, no. 3, p. 197-211. ISSN: 0032-5899.
Detail

MORAVČÍK, I.; KUBÍČEK, A.; MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; ADAM, O.; KAŇA, V.; POUCHLÝ, V.; ZÁDĚRA, A.; DLOUHÝ, I. The Origins of High-Entropy Alloy Contamination Induced by Mechanical Alloying and Sintering. Metals, 2020, vol. 10, no. 9, p. 1-15. ISSN: 2075-4701.
Detail

BIJALWAN, V.; PRAJZLER, V.; ERHART, J.; TAN, H.; ROUPCOVÁ, P.; SOBOLA, D.; TOFEL, P.; MACA, K. Rapid pressure-less and spark plasma sintering of (Ba0.85Ca0.15Zr0.1T0.9)O3 lead-free piezoelectric ceramics. Journal of the European Ceramic Society, 2021, vol. 41, no. 4, p. 2514-2523. ISSN: 0955-2219.
Detail

ČERVINEK, O.; WERNER, B.; KOUTNÝ, D.; VAVERKA, O.; PANTĚLEJEV, L.; PALOUŠEK, D. Computational Approaches of Quasi-Static Compression Loading of SS316L Lattice Structures Made by Selective Laser Melting. Materials, 2021, vol. 14, no. 9, p. 1-24. ISSN: 1996-1944.
Detail

B. Werner, O. Červinek, D. Koutný, A. Reisinger, H.E. Pettermann, M. Todt. Numerical and experimental study on the collapse of a triangular cell under. International Journal of Solids and Structures, 2021, vol. 236, no. 76, p. 1-12. ISSN: 0020-7683.
Detail

MALÝ, M.; KOUTNÝ, D.; PANTĚLEJEV, L.; PAMBAGUIAN, L.; PALOUŠEK, D. Effect of high-temperature preheating on pure copper thick-walled samples processed by laser powder bed fusion. Journal of Manufacturing Processes, 2022, no. 73, p. 924-938. ISSN: 1526-6125.
Detail

VRÁNA, R.; JAROŠ, J.; KOUTNÝ, D.; NOSEK, J.; ZIKMUND, T.; KAISER, J.; PALOUŠEK, D. Contour laser strategy and its benefits for lattice structure manufacturing by selective laser melting technology. Journal of Manufacturing Processes, 2022, vol. 74, no. 1, p. 640-657. ISSN: 1526-6125.
Detail

ČERVINEK, O.; PETTERMANN, H.; TODT, M.; KOUTNÝ, D.; VAVERKA, O. Non-linear dynamic finite element analysis of micro-strut lattice structures made by laser powder bed fusion. Journal of Materials Research and Technology, 2022, vol. 18, no. 1, p. 3684-3699. ISSN: 2238-7854.
Detail

VRÁNA, R.; KOUTECKÝ, T.; ČERVINEK, O.; ZIKMUND, T.; PANTĚLEJEV, L.; KAISER, J.; KOUTNÝ, D. Deviations of the SLM produced Lattice Structures and Their Influence on Mechanical properties. Materials, 2022, vol. 15, no. 9, p. 1-20. ISSN: 1996-1944.
Detail

VRÁNA, R.; ČERVINEK, O.;MAŇAS, P.; KOUTNÝ, D.; PALOUŠEK, D. Dynamic Loading of Lattice Structure Made by Selective Laser Melting-Numerical Model with Substitution of Geometrical Imperfections. Materials, 2018, vol. 11, no. 11, p. 1-21. ISSN: 1996-1944.
Detail

VAŠÁKOVÁ, K.; PANTĚLEJEV, L.; KOUTNÝ, D. The AlSi9Cu3 Alloy Processed by the Selective Laser Melting Technology. In Proceedings 31st International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd., 2022. p. 792-797. ISBN: 978-80-88365-06-8.
Detail

PRAJZLER, V.; MACA, K.; ŠŤASTNÝ, P.; TODD, R. Abnormal grain growth in DC flash sintered 3-mol% yttria-stabilized zirconia ceramics. Journal of the American Ceramic Society, 2022, vol. 105, no. 9, p. 5562-5568. ISSN: 0002-7820.
Detail

MORAVČÍK, I.; ZELENÝ, M.; DLOUHÝ, A.; HADRABA, H.; MORAVČÍKOVÁ DE ALMEIDA GOUVEA, L.; PAPEŽ, P.; FIKAR, O.; DLOUHÝ, I.; RAABE, D.; LI, Z. Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2022, vol. 23, no. 1, p. 376-392. ISSN: 1468-6996.
Detail

DOUBRAVA, M.; ŘEHOŘEK, L.; PANTĚLEJEV, L. The repair of Inconel 713LC turbine blade with artificial defects by Cold Spray technology. In Proceedings 31st International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd., 2022. p. 457-462. ISBN: 978-80-88365-06-8.
Detail

NOPOVÁ, K.; PANTĚLEJEV, L.; KOUTNÝ, D. Effect of Chemical Composition Change on Mechanical and Microstructural Properties of Aluminum Alloys Processed by Selective Laser Melting. In 31st International Conference on Metallurgy and Materials, METAL 2022. Ostrava: TANGER Ltd., 2022. p. 574-579. ISBN: 978-80-88365-06-8.
Detail

KOUTNÝ, D.; GRYGAR, F.; RŽONCA, M.; GURÁŇ, R.; KAFKA, R.; FOLTÝN, J.; ŽÁČEK, J.; KUHAJDIK, M.: ARM-MMDEV_V1; Multimateriálový nanášecí modul pro selektivní nanášení dvou kovových prášků. Vysoké učení technické v Brně Fakulta strojního inženýrství Technická 2896/2 616 69 Brno místnost D5/464. URL: https://intranet.ustavkonstruovani.cz/FileDownload/getProjectPdf/453/. (funkční vzorek)
Detail

ŘEHOŘEK, L.: Architektonický materiál; Multi-materiálový architekturovaný materiál – postup výroby. Ústav materiálových věd a inženýrství. (funkční vzorek)
Detail