Hlavním cílem projektu CEITEC – open access je zpřístupnit sdílené laboratoře v rámci centra CEITEC – Středoevropského technologického institutu pro ostatní vědecké týmy (výzkumné organizace dle Rámce) z České republiky a zahraničí formou open access. Předpokládáme využití kapacity sdílených laboratoři formou otevřeného přístupu zájemcům z ČR a zahraničí až do 20 % z kapacity každé sdílené laboratoře. Dílčím cílem projektu je zajišťovat provozuschopnost a optimální využití sdílených laboratoří centra CEITEC.

Description in English
The main objective of the project CEITEC - open access is to make the core facilities of CEITEC - Central European Institute of Technology accessible for the other Czech and international research teams in the form of open access. We expect capacity utilization of core facilities for open access of teams from the Czech Republic of up to 20 % capacity of each of the core facilities. The operational objective of the project is to ensure serviceability and optimum use of CEITEC core facilities.

Keywords
nanotechnology; structure biology; neuroscience; molecular medicine

Key words in English
nanotechnology, structure biology, neuroscience, molecular medicine

LM2011020

Czech

Škoda David, Ing., Ph.D. - principal person responsible

Central European Institute of Technology BUT
- responsible department (1.1.2012 - not assigned)
Central European Institute of Technology BUT
- beneficiary (1.1.2012 - not assigned)

ŘEZNÍČEK, M.; SZENDIUCH, I.; BURŠÍK, M.; JANKOVSKÝ, J.; OTÁHAL, A.: IMAPS flash Conference 2016. Brno (03.11.2016)
Detail

ŠKODA, D.: EuroTraining Program 2015 – Nanotechnology for Electronics. Brno (24.03.2015)
Detail

ŠKODA, D.: Úvodní workshop CEITEC Nano. Brno (05.03.2015)
Detail

ŠKODA, D.: Polovodičové technologie pro výzkum a vývoj (difuzní a oxidační procesy, technologie LPCVD a MOCVD. Brno (09.04.2015)
Detail

ŘEZNÍČEK, M.; SZENDIUCH, I.; BURŠÍK, M.; JANKOVSKÝ, J.; OTÁHAL, A.: IMAPS flash Conference 2015. Brno (15.10.2015)
Detail

ŠKODA, D.: Mezinárodní akademický kurz BEST International. Brno (11.06.2015)
Detail

ŠKODA, D.: Wire bonding Workshop. Brno (15.10.2015)
Detail

VALLEJOS VARGAS, S.; SELINA, S.; ANNANOUCH, F.; GRÁCIA, I.; LLOBET, E.; BLACKMAN, C. Micromachined Gas Sensors Based on Au-functionalized SnO2 Nanorods Directly Integrated without Catalyst Seeds via AA-CVD. Procedia Engineering, 2016, vol. 168, no. 1, p. 1078-1081. ISSN: 1877-7058.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; BLAŽÍK, P.; KALIVODA, M.; KOUSAL, P. Analysis of surface and subsurface layers after WEDM for Ti-6Al-4V with heat treatment. MEASUREMENT, 2018, vol. 2018, no. 116, p. 556-564. ISSN: 0263-2241.
Detail

ZAHRADNÍČEK, R.; PROKEŠ, T.; BENEŠ, L. The graphene oxide spincoating optimalization by planned experiment. Manufacturing Technology, 2017, vol. 17, no. 4, p. 635-639. ISSN: 1213-2489.
Detail

MOURALOVÁ, K.; ZAHRADNÍČEK, R.; HRDÝ, R. Occurrence of globule of debris on surfaces machined by WEDM. MM Science Journal, 2016, vol. 2016, no. 6, p. 1630-1633. ISSN: 1803-1269.
Detail

JIRGL, M.; JALOVECKÝ, R. Modelling and Simulations of Longitudinal Flight. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 228-233. ISBN: 978-80-214-4817-9.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; PROKEŠ, T.; HORYNOVÁ, M. Comparison of morphology and topography of surfaces of WEDM machined structural materials. MEASUREMENT, 2017, vol. 2017, no. 104, p. 12-20. ISSN: 0263-2241.
Detail

DRDLÍK, D.; SLÁMA, M.; HADRABA, H.; DRDLÍKOVÁ, K.; CIHLÁŘ, J. On the role of the indifferent electrolyte LiCl in electrophoretic deposition of hydroxyapatite from 2-propanol dispersions. Ceramics International, 2016, vol. 42, no. 15, p. 16529-16534. ISSN: 0272-8842.
Detail

JIRGL, M.; HAVLÍKOVÁ, M.; BRADÁČ, Z. The Dynamic Pilot Behavioral Models. In 25th DAAAM International Symposium. Procedia Engineering. Vienna: Elsevier, 2015. no. 1, p. 1192-1197. ISBN: 978-3-901509-99-5. ISSN: 1877-7058.
Detail

VALLEJOS VARGAS, S.; GRÁCIA, I.; FIGUERAS, E.; PIZÚROVÁ, N.; HUBÁLEK, J.; CANÉ, C. ZnO-based gas microsensors sensitive to CO at room temperature by photoactivation. In PROCEEDINGS OF THE 30TH ANNIVERSARY EUROSENSORS CONFERENCE - EUROSENSORS 2016. Procedia Engineering. Budapest, HUNGARY: Elsevier, 2016. no. 1, p. 415-418. ISSN: 1877-7058.
Detail

LEDNICKÝ, T.; BONYÁR, A. Highly-ordered gold nanoparticle surfaces for localized surface plasmon resonance sensors. CEITEC PhD Retreat II, Book of abstracts. Brno: Masaryk University, 2017. p. 90-90. ISBN: 978-80-210-8550-3.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R. Machining of highly oriented pyrolitic graphite using WEDM and the resulting quality of the surface. MM Science Journal, 2016, vol. 2016, no. 6, p. 1621-1624. ISSN: 1803-1269.
Detail

PROKEŠ, T.; MOURALOVÁ, K.; KOVÁŘ, J. Experimental evaluation on the quality of machined surface after turning of material Inconel 625. MM Science Journal, 2016, vol. 2016, no. 6, p. 1617-1620. ISSN: 1803-1269.
Detail

MOZALEV, A.; BENDOVÁ, M.; VAZQUEZ, R.; PYTLÍČEK, Z.; LLOBET, E.; HUBÁLEK, J. Formation and gas-sensing properties of a porous-alumina-assisted 3-D niobium-oxide nanofilm. SENSORS AND ACTUATORS B-CHEMICAL, 2016, no. 229, p. 587-598. ISSN: 0925-4005.
Detail

DRDLÍKOVÁ, K.; KLEMENT, R.; DRDLÍK, D.; SPUSTA, T.; GALUSEK, D.; MACA, K. Luminescent Er3+doped transparent alumina ceramics. Journal of the European Ceramic Society, 2017, vol. 37, no. 7, p. 2695-2703. ISSN: 0955-2219.
Detail

POLIEVKOVÁ, E.; DRBOHLAVOVÁ, J.; HUBÁLEK, J.; KŘIVČÍK J. Ion exchange membrane with antimicrobial effect. CEITEC PhD retreat. 1. Brno: Masarykova univerzita, 2015. 1 p. ISBN: 978-80-210-7825-3.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; MAN, O. Characterisation of 3D Topography of the Surface Machined by Finishing Technologies of WEDM and Grinding. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 445-449. ISBN: 978-80-01-05882-4.
Detail

FRANEK, L.; ŠŤASTNÝ, L.; BRADÁČ, Z. Modelling Transmission Lines for the Purpose of Data Transmission over Power Lines. In 25th DAAAM International Symposium. Procedia Engineering. Vienna: Elsevier, 2015. no. 1, p. 1381-1388. ISBN: 978-3-901509-99-5. ISSN: 1877-7058.
Detail

MANAKHOV, A.; MAKHNEVA, E.; SKLÁDAL, P.; NEČAS, D.; ČECHAL, J.; KALINA, L.; ELIÁŠ, M.; ZAJÍČKOVÁ, L. The robust bio-immobilization based on pulsed plasma polymerization of cyclopropylamine and glutaraldehyde coupling chemistry. APPLIED SURFACE SCIENCE, 2016, vol. 360, no. Part A, p. 28-36. ISSN: 0169-4332.
Detail

NEUGEBAUER, P.; BLOOS, D.; MARX, R.; LUTZ, P.; KERN, M.; AGUILÀ, D.; VAVERKA, J.; LAGUTA, O.; DIETRICH, C.; CLÉRAC, R.; VAN SLAGEREN, J. Ultra-broadband EPR spectroscopy in field and frequency domains. PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2018, vol. 20, no. 15528, p. 15528-15534. ISSN: 1463-9084.
Detail

GABLECH, I.; SVATOŠ, V.; PRÁŠEK, J.; HUBÁLEK, J. Influence of Underlayer on Crystallography and Roughness of Aluminum Nitride Thin Film Reactively Sputtered by Ion-Beam Kaufman Source. In Proceedings of 7 th International conference Nanocon 2015. 1. Ostrava: Tanger, 2015. p. 89-93. ISBN: 978-80-87294-59-8.
Detail

J.Matějíček, M. Vilémová, H. Hadraba, F. Di Gabriele, I. Kuběna, E. Kolíbalová, J. Michalička, J. Čech, A. Jäger. Behavior of W-based materials in hot helium gas. Nuclear Materials and Energy, 2016, vol. 9, no. 1, p. 405-410. ISSN: 2352-1791.
Detail

ROZBOŘIL, J.; RECHKEMMER, Y.; BLOOS, D.; MÜNZ, F.; WANG, C.; NEUGEBAUER, P.; ČECHAL, J.; NOVÁK, J.; VAN SLAGEREN, J. Magneto-optical investigations of molecular nanomagnet monolayers. DALTON TRANSACTIONS, 2016, vol. 45, no. 18, p. 7555-7558. ISSN: 1477-9226.
Detail

MOURALOVÁ, K.; ZAHRADNÍČEK, R.; STREJČEK, J. Surface morphology of iron-rhodium alloy after wire EDM. MM Science Journal, 2016, vol. 2016, no. 6, p. 1613-1616. ISSN: 1803-1269.
Detail

MOZALEV, A.; VAZQUEZ, R.; BENDOVÁ, M.; PYTLÍČEK, Z.; LLOBET, E.; HUBÁLEK, J. Porous-alumina-assisted formation of 3-D nanostructured niobium oxide films for advanced sensing applications. Procedia Engineering, 2015, vol. 120, no. 1, p. 435-438. ISSN: 1877-7058.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; KALIVODA, M. Quality of aluminium alloy surface after WEDM. MM Science Journal, 2017, vol. 2017, no. 1, p. 1679-1682. ISSN: 1803-1269.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KALIVODA, M.; DVOŘÁK, M. Experimental evaluation of the quality of surface after WEDM for steel X210CR12. MM Science Journal, 2017, vol. 2017, no. 2, p. 1778-1782. ISSN: 1803-1269.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; BENEŠ, L.; OSIČKA, K. Effect of wirefeed rate on the morphology of a surface machined using WEDM. Manufacturing Technology, 2016, vol. 2016, no. 4, p. 754-757. ISSN: 1213-2489.
Detail

BALVAN, J.; KŘÍŽOVÁ, A.; GUMULEC, J.; RAUDENSKÁ, M.; SLÁDEK, Z.; SEDLÁČKOVÁ, M.; BABULA, P.; SZTALMACHOVÁ, M.; KIZEK, R.; CHMELÍK, R.; MASAŘÍK, M. Multimodal Holographic Microscopy: Distinction between Apoptosis and Oncosis. PLoS One, 2015, vol. 10, no. 3, p. 1-16. ISSN: 1932-6203.
Detail

ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; ZIKMUND, T.; NOVOTNÝ, K.; KLAKURKOVÁ, L.; ČELKO, L.; SONG, G-L; KAISER, J. Assessment of localized corrosion under simulated physiological conditions of magnesium samples with heterogeneous microstructure: value of X-ray computed micro-tomography platform. Corrosion science, 2016, vol. 104, no. 3, p. 187-196. ISSN: 0010-938X.
Detail

ŠEDIVÝ, M.; SOJKA, A.; TUČEK, M.; ČALA, M.; NEUGEBAUER, P. Automation of a Terahertz Frequency Rapid Scan ESR Spectrometer. 59th Rocky Mountain Conference on Magnetic Resonance. Snowbird, Utah: 2018. p. 78-79.
Detail

GABLECH, I. Gas sensor based on MEMS cantilever resonator. CEITEC PhD Retreat. 1. Brno: Masarykova univerzita, 2015. 1 p. ISBN: 978-80-210-7825-3.
Detail

ŠŤASTNÝ, L.; FRANEK, L.; BRADÁČ, Z. Time synchronized low-voltage measurements for Smart Grids. In 25th DAAAM International Symposium. Procedia Engineering. Vienna: Elsevier, 2015. no. 1, p. 1389-1395. ISBN: 978-3-901509-99-5. ISSN: 1877-7058.
Detail

MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R. Study of surface morphology and topography of pure iron machined by WEDM. Manufacturing Technology, 2016, vol. 5, no. 2016, p. 1051-1055. ISSN: 1213-2489.
Detail

MANAKHOV, A.; MICHLÍČEK, M.; NEČAS, D.; POLČÁK, J.; MAKHNEVA, E.; ELIÁŠ, M.; ZAJÍČKOVÁ, L. Carboxyl-rich coatings deposited by atmospheric plasma co-polymerization of maleic anhydride and acetylene. SURFACE & COATINGS TECHNOLOGY, 2016, vol. 295, no. 1, p. 37-45. ISSN: 0257-8972.
Detail

VALLEJOS VARGAS, S.; PIZÚROVÁ, N.; ČECHAL, J.; GRÁCIA, I.; CANÉ, C. Aerosol-assisted Chemical Vapor Deposition of Metal Oxide Structures: Zinc Oxide Rods. Jove-Journal of Visualized Experiments, 2017, vol. 127, no. 1, p. 1-5. ISSN: 1940-087X.
Detail

GABLECH, I.; SVATOŠ, V.; CAHA, O.; HRABOVSKÝ, M.; PRÁŠEK, J.; HUBÁLEK, J.; ŠIKOLA, T. Preparation of (001) preferentially oriented titanium thin films by ion-beam sputtering deposition on thermal silicon dioxide. Journal of materials science, 2016, vol. 51, no. 7, p. 3329-3336. ISSN: 0022-2461.
Detail

MOURALOVÁ, K.; BEDNÁŘ, J.; KOVÁŘ, J.; MACH, J. Evaluation of MRR after WEDM depending on the resulting surface. Manufacturing Technology, 2016, vol. 2016, no. 2, p. 396-401. ISSN: 1213-2489.
Detail

GÁL, B.; VESELÝ, M.; ČOLLÁKOVÁ, J.; NEKULOVÁ, M.; JŮZOVÁ, V.; CHMELÍK, R.; VESELÝ, P. Distinctive behaviour of live biopsy-derived carcinoma cells unveiled using coherence-controlled holographic microscopy. PLoS One, 2017, vol. 12, no. 8, p. 1-14. ISSN: 1932-6203.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; PROKEŠ, T. Effect of width of kerf on machining accuracy and subsurface layer after WEDM. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, vol. 27, no. 4, p. 1908-1916. ISSN: 1059-9495.
Detail

ZAHRADNÍČEK, R.; HOUŠKA, P. SCHOTTKY SOLAR CELL WITH GRAPHENE/AL2O3/SI INTERFACE. In NANOCON 2016. 2016. p. 95-95. ISBN: 978-80-87294-71-0.
Detail

PYTLÍČEK, Z. MIKROSENZORY PLYNŮ ZALOŽENÉ NA SAMOUSPOŘÁDANÝCH 3D NANOVRSTVÁCH OXIDŮ KOVŮ. 2017. s. 1-163.
Detail

HAVLÍKOVÁ, M.; ŠEDIVÁ, S.; STIBOR, K.; BRADÁČ, Z. A Driver as the Regulator in Man-Machine System. In Programmable devices and systems. Programmable devices and systems. Velké Karlovice: Elsevier B.V., 2013. no. 1, p. 382-387. ISBN: 9783902823533. ISSN: 1474-6670.
Detail

KAUSHIK, P.; BANNOV, A.; JAŠEK, O.; PRÁŠEK, J.; ZAJÍČKOVÁ, L. Carbon nanotubes grown by microwave torch for ammonia gas detection. In WDS'16 Proceedings of Contributed Papers - Physics. Prague: Matfyzpress, 2016. p. 171-175. ISBN: 978-80-7378-333-4.
Detail

MAN, J.; KUBĚNA, I.; SMAGA, M.; MAN, O.; JAEVENPAA, A.; WEIDNER, A.; CHLUP, Z.; POLÁK, J. Microstructural changes during deformation of AISI 300 grade austenitic stainless steels: Impact of chemical heterogeneity. Procedia Structural Integrity, 2016, vol. 2, no. 1, p. 2299-2306. ISSN: 2452-3216.
Detail

MOURALOVÁ, K.; ZAHRADNÍČEK, R.; HOUŠKA, P. Evaluation of surface quality of X210CR12 steel for forming tools machined by WEDM. MM Science Journal, 2016, vol. 2016, no. 4, p. 1366-1369. ISSN: 1803-1269.
Detail

HAVLÍKOVÁ, M.; JIRGL, M.; BRADÁČ, Z. Human Reliability in Man-Machine Systems. In 25th DAAAM International Symposium. Procedia Engineering. Vienna: Elsevier, 2014. no. 1, p. 1207-1214. ISBN: 978-3-901509-99-5. ISSN: 1877-7058.
Detail

MOURALOVÁ, K.; MATOUŠEK, R.; KOVÁŘ, J.; MACH, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J. Analyzing the surface layer after WEDM depending on the parameters of a machine for the 16MnCr5 steel. MEASUREMENT, 2016, vol. 2016, no. 94, p. 771-779. ISSN: 0263-2241.
Detail

ZAHRADNÍČEK, R.; HOUŠKA, P. STUDY OF THE INFLUENCE OF SOLVENT ON TRANSMISSION QUALITY GRAPHENE. In NANOCON 2016. 2016. p. 42-42. ISBN: 978-80-87294-71-0.
Detail

CIHLÁŘ, J.; VRBA, R.; ČÁSTKOVÁ, K.; CIHLÁŘ, J. Effect of transition metal on stability and activity of La-Ca-M-(Al)-O (M ¼ Co, Cr, Fe and Mn) perovskite oxides during partial oxidation of methane. International journal of hydrogen energy, 2017, vol. 42, no. 31, p. 19920-19934. ISSN: 1879-3487.
Detail

VALLEJOS VARGAS, S.; PIZÚROVÁ, N.; GRÁCIA, I.; SOTELO-VAZQUEZ, C.; ČECHAL, J.; BLACKMAN, C.; PARKIN, I.; CANÉ, C. ZnO rods with exposed (100) facets grown via a self-catalyst vapor-solid mechanism and their photocatalytic and gas sensing properties. ACS Applied Materials & Interfaces, 2016, vol. 8, no. 48, p. 33335-33342. ISSN: 1944-8244.
Detail

DRDLÍK, D.; DRDLÍKOVÁ, K.; HADRABA, H.; MACA, K. Optical, mechanical and fractographic response of transparent alumina ceramics on erbium doping. Journal of the European Ceramic Society, 2017, vol. 37, no. 14, p. 4265-4270. ISSN: 0955-2219.
Detail

LEDNICKÝ, T.; BONYÁR, A. Highly-ordered gold nanoparticles surface fabrication for localized surface plasmon resonance sensors. Curie - Pasteur - CEITEC joint young scientist retreat. 2017. p. 73-73.
Detail

VALLEJOS VARGAS, S.; SELINA, S.; ANNANOUCH, F.; GRÁCIA, I.; LLOBET, E.; BLACKMAN, C. Aerosol assisted chemical vapour deposition of gas sensitive SnO2 and Au-functionalised SnO2 nanorods via a non-catalysed vapour solid (VS) mechanism. Scientific Reports, 2016, vol. 6, no. 1, p. 1-12. ISSN: 2045-2322.
Detail

MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; CASAS LUNA, M.; DIAZ-DE-LA-TORRE, S.; ČELKO, L.; KLAKURKOVÁ, L.; SPOTZ, Z.; DIÉGUEZ-TREJO, G.; FOHLEROVÁ, Z.; DVOŘÁK, K.; ZIKMUND, T.; KAISER, J. Spark plasma sintering of load-bearing iron-carbon nanotube-tricalcium phosphate CerMets for orthopaedic applications. JOM, 2016, vol. 68, no. 4, p. 1134-1142. ISSN: 1047-4838.
Detail

Responsibility: Škoda David, Ing., Ph.D.