Přístupnostní navigace
E-application
Search Search Close
Ing.
Ph.D.
FEEC, UVEE – Assistant professor
+420 54114 6722xtoman33@vut.cz
Send BUT message
2025
BÍLEK, V.; BÁRTA, J.; TOMAN, M.; LOŠÁK, P.; BRAMERDORFER, G. A comprehensive overview of high-speed solid-rotor induction machines: Applications, classification, and multi-physics modeling. INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS, 2025, vol. 166, no. 5, p. 1-28. ISSN: 0142-0615.Detail
2024
BÁRTA, J.; TOMAN, M.; LOŠÁK, P.; AARNIOVUORI, L.; VÍTEK, O. Line-Start Permanent Magnet Machines for Low-Power Applications. In 2024 International Conference on Electrical Machines (ICEM). New York: IEEE, 2024. 7 p. ISBN: 979-8-3503-7060-7.Detail
SÚKENÍK, J.; TOMAN, M. Analysis of Heat Transfer in the Air Gap of Electrical Machines Using Empirical Equations and Computational Fluid Dynamics. In Proceedings I of the 30th Conference STUDENT EEICT 2024: General papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2024. p. 353-357. ISBN: 978-80-214-6231-1.Detail
2023
LAŽEK, T.; PAZDERA, I.; TOMAN, M. Simulation and Comparison of a Loss Minimization Algorithm with Conventional Efficiency Improvement Methods for Field-Oriented Control of an Induction Machine. In 2023 IEEE International Conference on Environment and Electrical Engineering and 2023 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). Madrid, Spain: University Carlos III of Madrid, Spain, 2023. p. 1434-1439. ISBN: 979-8-3503-4742-5.Detail
2022
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Physics Informed Neural Network and RC model of Li-Ion Battery. Advanced Batteries Accumulators and Fuel Cells – 23rd ABAF. 1. Brno: Brno University of Technology Faculty of Electrical Engineering and Communication, 2022. p. 175-177. ISBN: 978-80-214-6088-1.Detail
LAŽEK, T.; PAZDERA, I.; TOMAN, M. Comparison and Simulation of Two Loss Minimization Algorithms for Field-oriented Control of Induction Motor. In 2022 IEEE 20th International Power Electronics and Motion Control Conference (PEMC). Brasov, Romania: Transilvania University of Brasov, Romania, 2022. p. 216-222. ISBN: 978-1-6654-9681-0.Detail
2021
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Using Neural Network for Estimation of Li-ion Battery Depth of Discharge. Advanced Batteries Accumulators and Fuel Cells - 22th ABAF. 1. Brno: Brno University of Technology, 2021. p. 1-3. ISBN: 978-80-214-5975-5.Detail
TOMAN, M. Analysis of Equivalent Thermal Conductivity of Winding Using FEM-Based Model. In Proceedings I of the 27th Conference STUDENT EEICT 2021. 1. Brno: Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2021. p. 544-548. ISBN: 978-80-214-5942-7.Detail
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Estimation of Depth of Discharge of Li-ion Battery Using Neural Network. In ECS. ECS Transactions. 2021. no. 1, p. 541-547. ISSN: 1938-5862.Detail
2020
TOMAN, M.; CIPÍN, R.; VOREL, P. Thermal Model of Small Li-ion Battery Pack with Case Made of Phase Change Material. In ECS. ECS Transactions. 2020. no. 1, p. 365-371. ISSN: 1938-5862.Detail
BÁRTA, J.; KNEBL, L.; TOMAN, M.; ABRAMENKO, V.; PETROV, I.; LOLOVÁ, I. Design and Analysis of 1.5 kW, 1500 rpm Line-Start Permanent Magnet Synchronous Machine. In Proceedings of the 2020 19th International Conference on Mechatronics – Mechatronika (ME). New York: IEEE, 2020. p. 28-32. ISBN: 978-1-7281-5602-6.Detail
TOMAN, M.; CIPÍN, R.; VOREL, P. Thermal Model of Li-ion Battery Pack in PCM Case. 21st Advanced Batteries, Accumulators and Fuel Cell. 1. 2020. p. 181-183. ISBN: 978-80-214-5889-5.Detail
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I.; MIKLÁŠ, J. Approximation of Alkaline Battery Transfer Function Using Neural Network. 2020. p. 1-3. ISBN: 978-80-214-5889-5.Detail
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I.; MIKLÁŠ, J. Approximation of Battery Transfer Function Using Neural Network. In ECS. ECS Transactions. 2020. no. 1, p. 351-356. ISSN: 1938-5862.Detail
2019
VOREL, P.; MARTIŠ, J.; TOMAN, M. Simple BMS circuit and charger for a Li-ion battery pack 12 V. In Advanced batteries, accumulators and fuel cells. 1. 2019. p. 221-223. ISBN: 978-80-214-5774-4.Detail
TOMAN, M.; VOREL, P.; CIPÍN, R.; PROCHÁZKA, P. Identification of Induction Motor Parameters Considering Sensitivity Analysis of Measured Quantities. In 2019 International Conference on Electrical Drives & Power Electronics (EDPE) Proceedings. 2019. p. 298-302. ISBN: 978-1-7281-0388-4.Detail
VOREL, P.; TOMAN, M.; MARTIŠ, J. Induction Motor Control with Respect to Maximum Efficiency in a Wide Range of Speed and Torque. In EDPE proceedings. Košice: 2019. p. 248-254. ISBN: 978-1-7281-0388-4.Detail
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Methods of SOC Estimation of Li-ion Batteries. In ECS Transactions. ECS Transactions. 95. IOP Publishing Ltd, 2019. no. 1, p. 1-6. ISBN: 9781607688877. ISSN: 1938-5862.Detail
TOMAN, M.; CIPÍN, R.; VOREL, P. Výpočet optimálního spřaženého toku pro dosažení maximální účinnosti asynchronního motoru provozovaného v širokém rozsahu otáček a momentu. In XXXVI. celostátní konference o elektrických pohonech, Sborník. Plzeň: Česká elektrotechnická společnost, ÚOS Elektrické pohony, 2019. s. 1-6. ISBN: 978-80-02-02860-4.Detail
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Estimation of SOC of Li-ion Batteries. In Advanced Batteries Accumulators and Fuel Cells – 20th ABAF. 1. 2019. p. 172-174. ISBN: 978-80-214-5774-4.Detail
TOMAN, M.; CIPÍN, R.; VOREL, P.; ČERVINKA, D. Dynamic Thermal Model for Cylindrical Battery Cell Temperature Modeling. In 20th International Conference on Advanced Batteries, Accumulators and Fuel Cells, ABAF 2019. ECS Transactions. 2019. no. 1, p. 1-7. ISBN: 9781607685395. ISSN: 1938-5862.Detail
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Identification of Li-ion Battery Model Parameters. In Electrical Drives & Power Electronics (EDPE) Proceeding. 1. 2019. p. 225-229. ISBN: 978-1-7281-0388-4.Detail
VOREL, P.; MARTIŠ, J.; TOMAN, M. Spínaný zdroj HCLV 120kW. In XXXVI. Celostátní konference o elektrických pohonech. Plzeň: 2019. s. 1-6. ISBN: 978-80-02-02860-4.Detail
TOMAN, M.; CIPÍN, R.; VOREL, P.; ČERVINKA, D. Dynamic Thermal Model of a Cylindrical Battery Cell. In Advanced Batteries Accumulators and Fuel Cells – 20th ABAF. 1. 2019. p. 218-220. ISBN: 978-80-214-5774-4.Detail
2018
TOMAN, M.; VOREL, P.; CIPÍN, R.; MACH, M. Identification of Induction Machine Electromagnetic Parameters for a Wide Range of Frequency and Flux Density. In Mechatronics 2017. Advances in Intelligent Systems and Computing. 1. Cham: Springer International Publishing, 2018. p. 289-295. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.Detail
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. High-Frequency Model of Alkaline Battery in Form of Transfer Function. Advanced Batteries Accumulators and Fuel Cells – 19th ABAF. Prvni. Brno: Brno University of Technology, 2018. p. 153-155. ISBN: 978-80-214-5651-8.Detail
TOMAN, M.; CIPÍN, R.; VOREL, P. Thermal Model of Cylindrical Battery Cell. In Advanced Batteries Accumulators and Fuel Cells – 19th ABAF. Prvni. Brno: Brno University of Technology, 2018. p. 187-189. ISBN: 978-80-214-5651-8.Detail
TOMAN, M.; CIPÍN, R.; VOREL, P. Thermal Network for Battery Cell Temperature Modeling. ECS Transactions, 2018, vol. 87, no. 1, p. 285-290. ISSN: 1938-5862.Detail
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Nonlinear Equivalent Circuit of Induction Machine. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno, Czech Republic: IEEE, 2018. p. 149-153. ISBN: 978-80-214-5544-3.Detail
TOMAN, M.; VOREL, P.; CIPÍN, R.; MACH, M. Algorithm for IM Optimal Flux Determination Respecting Nonlinearities and Thermal Influences. In Conference Proceedings 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). Palermo, Italy: 2018. p. 1046-1050. ISBN: 978-1-5386-5185-8.Detail
VOREL, P.; ČERVINKA, D.; TOMAN, M.; MARTIŠ, J. Durability of a Li-ion Battery Pack. In Advanced Batteries Accumulators and Fuel Cells – 19th ABAF. první. Brno: Brno University of Technology, 2018. p. 66-68. ISBN: 978-80-214-5651-8.Detail
VOREL, P.; ČERVINKA, D.; TOMAN, M.; MARTIŠ, J. Durability of a Li-ion Battery Pack. In ECS Transactions. ECS Transactions. 87. Electrochemical Society Inc., 2018. no. 1, p. 247-252. ISBN: 978-1-60768-864-8. ISSN: 1938-5862.Detail
MACH, M.; CIPÍN, R.; TOMAN, M.; HÁJEK, V. Impact of Number of Rotor Slots on Performance of Three-Phase and Single-Phase Induction Machines. In IEEE EEEIC 2018. Palermo, Itálie: IEEE EEEIC 2018, 2018. p. 835-840. ISBN: 978-1-5386-5185-8.Detail
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. High-Frequency Model of Battery in Form of Transfer Function. In ECS Transactions. ECS Transactions. 87. 2018. no. 1, p. 269-274. ISBN: 9781607688648. ISSN: 1938-5862.Detail
TOMAN, M.; VOREL, P.; CIPÍN, R. Thermal Networks Respecting Asymmetric Cooling of Electrical Machine Parts. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno, Czech Republic: IEEE, 2018. p. 516-521. ISBN: 978-80-214-5544-3.Detail
2017
CIPÍN, R.; TOMAN, M.; KNOBLOCH, J. Estimation of Alkaline Battery Parameters. ECS Transactions, 2017, vol. 81, no. 1, p. 1-6. ISSN: 1938-5862.Detail
MACH, M.; CIPÍN, R.; TOMAN, M.; HÁJEK, V. Impact of Manufacturing Proces on Optimal Shape of Induction Machine Slots. In Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe), 2017 IEEE International Conference on. Milán: Environment and Electrical Engineering, 2017. p. 483-487. ISBN: 978-1-5386-3917-7.Detail
CIPÍN, R.; MACH, M.; TOMAN, M.; KNOBLOCH, J. Measurement and evaluation of DC motor starting torque. In Conference Proceedings - 2017 17th IEEE International Conference on Environment and Electrical Engineering and 2017 1st IEEE Industrial and Commercial Power Systems Europe. Milan, Italy: Institute of Electrical and Electronics Engineers Inc., 2017. p. 1-5. ISBN: 978-1-5386-3917-7.Detail
CIPÍN, R.; TOMAN, M.; KNOBLOCH, J. Estimation of Primary Cell Parameters. In Conference proceeding ABAF. Brno: 2017. p. 1-3. ISBN: 978-80-214-5529-0.Detail
TOMAN, M.; VOREL, P.; CIPÍN, R.; MACH, M. Application of Acceleration Method for Evaluation of Induction Motor Torque-Speed Characteristics. In Conference Proceedings - 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe. Milan, Italy: Institute of Electrical and Electronics Engineers Inc., 2017. p. 1085-1088. ISBN: 978-1-5386-3916-0.Detail
TOMAN, M.; VOREL, P.; CIPÍN, R. Thermal Calculation of Li-Ion Battery Pack. In ECS Transactions. ECS Transactions. 2017. no. 1, p. 1-6. ISBN: 9781607688297. ISSN: 1938-5862.Detail
2016
CIPÍN, R.; PROCHÁZKA, P.; TOMAN, M.; MARTIŠ, J.; ČERVINKA, D. Automatic Li-ion Accumulator Measuring Stand. ECS Transactions, 2016, vol. 74, no. 1, p. 77-83. ISSN: 1938-5862.Detail
TOMAN, M.; CIPÍN, R.; ČERVINKA, D.; VOREL, P.; PROCHÁZKA, P. Li-ion battery charging efficiency. In ECS Transactions. ECS Transactions. 74. Electrochemical Society Inc., 2016. no. 1, p. 37-43. ISBN: 9781607685395. ISSN: 1938-5862.Detail
VOREL, P.; ČERVINKA, D.; PROCHÁZKA, P.; TOMAN, M.; MARTIŠ, J. High Efficiency Fast-Chargers for Lead-Acid Batteries. In ECS Transactions. ECS Transactions. 74. ECS Transactions, 2016. no. 1, p. 23-30. ISBN: 9781607685395. ISSN: 1938-5862.Detail
CIPÍN, R.; PROCHÁZKA, P.; TOMAN, M.; MARTIŠ, J.; ČERVINKA, D. Automatic Li-ion Battery Measuring Stand. International conference 17th ABAF. 2016. p. 1-4. ISBN: 978-80-214-5384-5.Detail
MARTIŠ, J.; VOREL, P.; CIPÍN, R.; PROCHÁZKA, P.; TOMAN, M. Compact High-efficiency Li-Ion Fast-charger. In ECS Transactions. ECS Transactions. 74. The Electrochemical Society, 2016. no. 1, p. 17-22. ISBN: 9781607685395. ISSN: 1938-5862.Detail
TOMAN, M. THERMAL MODEL OF INDUCTION MACHINE AND ITS PRACTICAL VERIFICATION. Proceedings of the 22nd Conference STUDENT EEICT 2016. 2016. p. 497-501. ISBN: 978-80-214-5350-0.Detail
*) Citations are generated once every 24 hours.