Publication results

• 2025

  OLIVER URRUTIA, C.; KASHIMBETOVA, A.; SLÁMEČKA, K.; CASAS LUNA, M.; MATULA, J.; KOLEDOVÁ, Z.; KAISER, J.; ČELKO, L.; MONTUFAR JIMENEZ, E. Porous titanium/hydroxyapatite interpenetrating phase composites with optimal mechanical and biological properties for personalized bone repair. Biomaterials Advances, 2025, vol. 166, no. 1, p. 1-11. ISSN: 2772-9508.
  Detail

• 2024

  TKACHENKO, S.; SLÁMEČKA, K.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; GEJDOŠ, P.; KSENZOVA, O.; VALÁŠEK, D.; DVOŘÁK, K.; ŠULÁK, I.; GÁLÍKOVÁ, M.; BALÁŽ, M.; DEÁK, A.; CIHLÁŘ, J.; ČELKO, L. A Comparative Study of the Impact of La2O3 and La2Zr2O7 Dispersions on Molybdenum Microstructure, Mechanical Properties, and Fracture. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, vol. 33, no. October, p. 14483-14494. ISSN: 1544-1024.
  Detail

  DROTÁROVÁ, L.; SLÁMEČKA, K.; BALINT, M.; REMEŠOVÁ, M.; HUDÁK, R.; ŽIVČÁK, J.; ČELKO, L.; MONTUFAR JIMENEZ, E. Biodegradable WE43 Mg alloy/hydroxyapatite interpenetrating phase composites with reduced hydrogen evolution. Bioactive Materials, 2024, vol. 42, no. 12, p. 519-530. ISSN: 2452-199X.
  Detail

  SLÁMEČKA, K.; SKALKA, P.; POKLUDA, J. Modeling Mechanical Properties of Titanium Scaffolds with Variable Microporosity. Advanced engineering materials, 2024, vol. 26, no. 19, p. 1-8. ISSN: 1527-2648.
  Detail

  TKACHENKO, S.; OLIVER URRUTIA, C.; KSENZOVA, O.; SLÁMEČKA, K.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; BALÁŽ, M.; DEÁK, A.; MONTUFAR JIMENEZ, E.; ČELKO, L. Production of spherical Mo and Mo-Si powders by spray drying of Si suspension in a water-soluble Mo precursor. ADVANCED POWDER TECHNOLOGY, 2024, vol. 35, no. 1, 12 p. ISSN: 0921-8831.
  Detail

  OLIVER URRUTIA, C.; CASAS LUNA, M.; KOLEDOVÁ, Z.; SLÁMEČKA, K.; ZIKMUND, T.; KAISER, J.; ČELKO, L.; MONTUFAR JIMENEZ, E. Fabrication of customized open-cell titanium foams by direct foaming for biomedical applications. Journal of Materials Research and Technology-JMR&T, 2024, vol. 33, no. 11, p. 1704-1714. ISSN: 2238-7854.
  Detail

• 2023

  SLÁMEČKA, K.; KASHIMBETOVA, A.; POKLUDA, J.; ZIKMUND, T.; KAISER, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by material extrusion additive manufacturing. MATERIALS & DESIGN, 2023, vol. 225, no. 1, p. 1-11. ISSN: 0264-1275.
  Detail

  TKACHENKO, S.; BEDNAŘÍKOVÁ, V.; KSENZOVA, O.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CIHLÁŘ, J.; BALÁŽ, M.; DEÁK, A.; ČELKO, L. Microstructure and reduction behavior of Mo powders doped with La2O3 and ZrO2 oxides using the spray drying method. Journal of Alloys and Compounds, 2023, vol. 964, no. 11.6.2023, 13 p. ISSN: 0925-8388.
  Detail

  OLIVER URRUTIA, C.; DROTÁROVÁ, L.; GASCÓN-PÉREZ, S.; SLÁMEČKA, K.; RAVASZOVÁ, S.; ČELKO, L.; MONTUFAR JIMENEZ, E. Hydroxyapatite-Resin Composites Produced by Vat Photopolymerization and Post-Processing via In Situ Hydrolysis of Alpha Tricalcium Phosphate. Ceramics-Switzerland, 2023, vol. 6, no. 4, p. 2282-2294. ISSN: 2571-6131.
  Detail

  SLÁMEČKA, K.; KASHIMBETOVA, A.; TKACHENKO, S.; GEJDOŠ, P.; POKLUDA, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Fatigue performance of hierarchically porous titanium scaffolds produced by additive manufacturing and its possible improvement by gas nitriding. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. BRISTOL: IOP PUBLISHING LTD, 2023. no. 1, 7 p. ISSN: 1742-6588.
  Detail

  TKACHENKO, S.; SLÁMEČKA, K.; OLIVER URRUTIA, C.; KSENZOVA, O.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; DVOŘÁK, K.; BALÁŽ, M.; DEÁK, A.; KACHLÍK, M.; ČELKO, L.; MONTUFAR JIMENEZ, E. Effect of powder milling on sintering behavior and monotonic and cyclic mechanical properties of Mo and Mo-Si lattices produced by direct ink writing. Journal of Materials Research and Technology-JMR&T, 2023, vol. 27, no. 10, p. 2475-2489. ISSN: 2238-7854.
  Detail

• 2022

  KASHIMBETOVA, A.; SLÁMEČKA, K.; DÍAZ DE LA TORRE, S.; HERNÁNDEZ-MORALES, B.; MENDEZ-GARCIA, J.; PINA-BARBA, M.; HUI, D.; ČELKO, L.; MONTUFAR JIMENEZ, E. Pressure-less spark plasma sintering of 3D-plotted titanium porous structures. Journal of Materials Research and Technology-JMR&T, 2022, vol. 22, no. 1, p. 2147-2157. ISSN: 2238-7854.
  Detail

  OLIVER URRUTIA, C.; KASHIMBETOVA, A.; SLÁMEČKA, K.; ČELKO, L.; MONTUFAR JIMENEZ, E. Robocasting Additive Manufacturing of Titanium and Titanium Alloys: A Review. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2022, no. September, p. 1-14. ISSN: 0972-2815.
  Detail

  KASHIMBETOVA, A.; SLÁMEČKA, K.; CASAS LUNA, M.; OLIVER-URRUTIA, C.; RAVASZOVÁ, S.; DVOŘÁK, K.; ČELKO, L.; MONTUFAR JIMENEZ, E. Implications of unconventional setting conditions on the mechanical strength of synthetic bone grafts produced with self-hardening calcium phosphate pastes. Ceramics International, 2022, vol. 48, no. 2022, p. 6225-6235. ISSN: 0272-8842.
  Detail

• 2021

  KASHIMBETOVA, A.; TKACHENKO, S.; SLÁMEČKA, K.; REMEŠOVÁ, M.; KLAKURKOVÁ, L.; PAVLOUŠKOVÁ, Z.; ČELKO, L.; MONTUFAR JIMENEZ, E. Extrusion, Debinding and Sintering of a Commercial Pure Titanium Ink for Robocasting. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1215-1221. ISBN: 978-80-87294-99-4.
  Detail

  KOMAROV, P.; JECH, D.; TKACHENKO, S.; SLÁMEČKA, K.; DVOŘÁK, K.; ČELKO, L. Wetting Behavior of Wear-Resistant WC-Co-Cr Cermet Coatings Produced by HVOF: The Role of Chemical Composition and Surface Roughness. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2021, no. 9, p. 1-19. ISSN: 1059-9630.
  Detail

• 2020

  JECH, D.; ČELKO, L.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CTIBOR, P. Influence of isothermal oxidation on microstructure of YSZ and Mullite-YSZ thermal barrier coatings. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. no. 1, p. 378-383. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
  Detail

  MONTUFAR JIMENEZ, E.; TKACHENKO, S.; CASAS LUNA, M.; ŠKARVADA, P.; SLÁMEČKA, K.; DÍAZ DE LA TORRE, S.; KOUTNÝ, D.; PALOUŠEK, D.; KOLEDOVÁ, Z.; HERNÁNDEZ-TAPIA, L.; ZIKMUND, T.; ČELKO, L.; KAISER, J. Benchmarking of additive manufacturing technologies for commercially-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. Additive Manufacturing, 2020, vol. 36, no. 101516, p. 1-13. ISSN: 2214-8604.
  Detail

  ČELKO, L.; JECH, D.; TKACHENKO, S.; KOMAROV, P.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CTIBOR, P. Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Sisicate Attack. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. no. 1, p. 360-365. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
  Detail

  JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; DYČKOVÁ, L.; SLÁMEČKA, K.; RAVASZOVÁ, S.; DVOŘÁK, K.; ČELKO, L. Thermal Cyclic Behaviour of Conventional YSZ and Mullite-YSZ Thermal Barrier Coatings. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 417-422. ISSN: 1662-9507.
  Detail

  SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. SURFACE & COATINGS TECHNOLOGY, 2020, vol. 384, no. 125328, p. 1-13. ISSN: 0257-8972.
  Detail

  SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling behaviour of plasma-sprayed thermal barrier coatings with pre-oxidized NiCrAlY and NiCoCrAlY bond-coats. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. no. 1, p. 439-444. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
  Detail

  CASAS LUNA, M.; TORRES RODRÍGUEZ, J.; Valdés-Martínez, O. U.; Obradović, N.; SLÁMEČKA, K.; MACA, K.; KAISER, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. Ceramics International, 2020, vol. 46, no. 7, p. 8853-8861. ISSN: 0272-8842.
  Detail

  MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; CASAS LUNA, M.; SKALKA, P.; RAMIREZ-CEDILLO, E.; ZBONČÁK, M.; KAISER, J.; ČELKO, L. Factors governing the dimensional accuracy and fracture modes under compression of regular and shifted orthogonal scaffolds. Journal of the European Ceramic Society, 2020, vol. 40, no. 14, p. 4923-4931. ISSN: 0955-2219.
  Detail

  ČELKO, L.; SKALKA, P.; SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; ROČŇÁKOVÁ, I.; ŠVEJCAR, J.; HOLEMÝ, D.; KAISER, J. The Influence of Surface Dipping and Bulk Filling Agents on Properties of High-Speed Grinding Wheels: Materialographic-Based Numerical Modelling. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 43-47. ISSN: 1662-9507.
  Detail

  CASAS LUNA, M.; RAVASZOVÁ, S.; SKALKA, P.; GEJDOŠ, P.; JECH, D.; SLÁMEČKA, K.; KAISER, J.; DVOŘÁK, K.; ČELKO, L. Thermal cycling effect on the phase stability and fracture resistance of synthetic barium/magnesium aluminosilicate systems. Ceramics International, 2020, vol. 46, no. 15, p. 24129-24136. ISSN: 0272-8842.
  Detail

• 2019

  SKALKA, P.; SLÁMEČKA, K.; MONTUFAR JIMENEZ, E.; ČELKO, L. Estimation of the effective elastic constants of bone scaffolds fabricated by direct ink writing. Journal of the European Ceramic Society, 2019, vol. 39, no. 4, p. 1586-1594. ISSN: 0955-2219.
  Detail

• 2018

  ROČŇÁKOVÁ, I.; SLÁMEČKA, K.; MONTUFAR JIMENEZ, E.; REMEŠOVÁ, M.; DYČKOVÁ, L.; BŘÍNEK, A.; JECH, D.; DVOŘÁK, K.; ČELKO, L.; KAISER, J. Deposition of Hydroxyapatite and Tricalcium Phosphate Coatings by Suspension Plasma Spraying: Effects of Torch Speed. Journal of the European Ceramic Society, 2018, vol. 38, no. 16, p. 5489-5496. ISSN: 0955-2219.
  Detail

  SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with a crack at the TGO/bond-coat interface. SURFACE & COATINGS TECHNOLOGY, 2018, vol. 337, no. 1, p. 321-334. ISSN: 0257-8972.
  Detail

  TKACHENKO, S.; DVOŘÁK, K.; JECH, D.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; PALOUŠEK, D.; ČELKO, L. Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill. WEAR, 2018, vol. 412-413, no. 1, p. 49-59. ISSN: 0043-1648.
  Detail

• 2017

  TRUBAČOVÁ, P.; PÍŠKA, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Analysis of Selective Laser Melting Process Parameters Effect on Mechanical and Material Properties for Stainless Steel 316L. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. no. 1, p. 579-582. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
  Detail

  ČELKO, L.; JECH, D.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; KLAKURKOVÁ, L. Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium-Silicate Enviromental Barier Coatings. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 569-573. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
  Detail

  KOMAROV, P.; ČELKO, L.; REMEŠOVÁ, M.; SKOROKHOD, K.; JECH, D.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MUŠÁLEK, R. The Role of Microstructure on Wettability of Plasma Sprayed Yttria Stabilized Zirconia Coatings. In Metal 2017 Conference Prosceedings. Ostrava: TANGER Ltd., 2017. p. 1116-1121. ISBN: 978-80-87294-79-6.
  Detail

  KOMAROV, P.; ČELKO, L.; JECH, D.; PAPULA, M.; SLÁMEČKA, K.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; KAISER, J. Investigations of Wettability of Wear Resistant Coatings Produced by Atmospheric Plasma Spraying. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 230-235. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
  Detail

  JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HORYNOVÁ, M.; ŠVEJCAR, J. Formation of Thermally Sprayed Coatings on Grid-like Structure Substrate. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. no. 1, p. 387-390. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
  Detail

  SLÁMEČKA, K.; POKLUDA. Simple criterion for predicting fatigue life under combined bending and torsion loading. Frattura ed Integrita Strutturale-Fracture and Structural Integrity, 2017, vol. 11, no. 41, p. 123-128. ISSN: 1971-8993.
  Detail

• 2016

  SLÁMEČKA, K.; SKALKA, P.; ČELKO, L.; POKLUDA, J.; SAUCEDO-MORA, L.; MARROW, T.; THANDAVAMOORTHY, U. Plasma-sprayed thermal barrier coatings: numerical study on damage localization and evolution. Frattura ed Integrita Strutturale-Fracture and Structural Integrity, 2016, vol. 10, no. 35, p. 322-329. ISSN: 1971-8993.
  Detail

  JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HORYNOVÁ, M.; ŠVEJCAR, J. Formation of Thermally Sprayed Coatings on Grid-like Structure Substrate. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 111-111. ISBN: 978-80-214-5357-9.
  Detail

  SLÁMEČKA, K.; SKALKA, P.; JECH, D.; KLAKURKOVÁ, L.; ČELKO, L. Critical Locations in Plasma Sprayed Thermal Barrier Coatings Due to Irregularities of Bond Coat Surface. In New Trends on Integrity Reliability Failure. Porto-Portugal: FEUP-INEGI, 2016. p. 387-388. ISBN: 978-989-98832-4-6.
  Detail

  TRUBAČOVÁ, P.; PÍŠKA, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Analysis of Selective Laser Melting Process Parameters Effect on Mechanical and Material Properties for Stainless Steel 316L. Solid State Phenomena, 2016, vol. 258, no. 1, p. 579-582. ISSN: 1662-9779.
  Detail

  SLÁMEČKA, K.; SKALKA, P.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with an irregular top-coat/bond-coat interface. SURFACE & COATINGS TECHNOLOGY, 2016, vol. 304, no. 1, p. 574-583. ISSN: 0257-8972.
  Detail

  ČELKO, L.; JECH, D.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; KLAKURKOVÁ, L. Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium-Silicate Enviromental Barier Coatings. Metallography ´16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 136-136. ISBN: 978-80-553-2547-7.
  Detail

  SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. A fractographic study of bending/torsion fatigue failure in metallic materials with protective surface layers. Advances in Materials Science and Engineering, 2016, vol. 2016, no. 1, p. 1-6. ISSN: 1687-8434.
  Detail

• 2015

  SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Biaxial Fatigue Fractures of Case-Hardened and High-Temperature-Coatings-Protected Specimens. Powder Metallurgy Progress, 2015, vol. 15, no. special, p. 145-149. ISSN: 1335-8987.
  Detail

  SLÁMEČKA, K.; ČELKO, L.; SKALKA, P.; POKLUDA, J.; NĚMEC, K.; JULIŠ, M.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Bending fatigue failure of atmospheric-plasma-sprayed CoNiCrAlY + YSZ thermal barrier coatings. International Journal of Fatigue, 2015, vol. 70, no. 1, p. 186-195. ISSN: 0142-1123.
  Detail

  JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; DVOŘÁČEK, R.; ŠVEJCAR, J. Influence of Technological Parameters on a Quality of Atmospheric Plasma Sprayed Al2O3+13TiO2 and Cr2O3 Coatings. In Multi Scale Design of Advanced Materials. Brno: 2015. p. 123-130. ISBN: 978-80-214-5146-9.
  Detail

  ČELKO, L.; JECH, D.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; KAISER, J. Princip fukce tepelných bariér připravovaných žárovými nástřiky. Transfer, 2015, roč. 2015, č. 25, s. 42-45. ISSN: 1801-9315.
  Detail

  SAUCEDO-MORA, L.; SLÁMEČKA, K.; THANDAVAMOORTHY, U.; MARROW, T. Multi-scale modeling of damage development in a thermal barrier coating. SURFACE & COATINGS TECHNOLOGY, 2015, vol. 276, no. 1, p. 399-407. ISSN: 0257-8972.
  Detail

  SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Stability of plasma-sprayed thermal barrier coatings: The role of the waviness of the bond coat and the thickness of the thermally grown oxide layer. SURFACE & COATINGS TECHNOLOGY, 2015, vol. 274, no. 1, p. 26-36. ISSN: 0257-8972.
  Detail

• 2014

  VOJTEK, T.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Description of Fatigue Crack Growth under Modes II, III and II+III in Terms of J-integral. Procedia Materials Science, 2014, vol. 3, no. 1, p. 835-840. ISSN: 2211-8128.
  Detail

  ČELKO, L.; KLAKURKOVÁ, L.; SMETANA, B.; SLÁMEČKA, K.; ŽALUDOVÁ, M.; HUI, D.; ŠVEJCAR, J. Application of sacrificial coatings and effect of composition on Al-Al3NI Ultrafine eutectic formation. Journal of Mining and Metallurgy Section B-Metallurgy, 2014, vol. 50, no. 1, p. 31-36. ISSN: 1450-5339.
  Detail

  ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SMETANA, B.; ŽALUDOVÁ, M.; ŠVEJCAR, J. Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloy. In Key Engineering Materials. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. no. 1, p. 513-516. ISBN: 9783037859346. ISSN: 1013-9826.
  Detail

  ČELKO, L.; KLAKURKOVÁ, L.; JECH, D.; JULIŠ, M.; SLÁMEČKA, K.; ŠVEJCAR, J. Microstructure Development and Phlase Evolutin of Nickel Coated Aluminium and Hydronalium Substrates. In Metal 2014 Conference Prosceedings. 1. Ostrava: TANGER Ltd., 2014. p. 915-920. ISBN: 978-80-87294-54-3.
  Detail

  ŠVEJCAR, J.; ČELKO, L.; DVOŘÁČEK, E.; KLAKURKOVÁ, L.; JULIŠ, M.; SLÁMEČKA, K.; ZAPLETAL, J. Thermal Spray Technology and Casting in Renovation of Friction Bearings Surface. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. no. 1, p. 573-577. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
  Detail

  JECH, D.; ČELKO, L.; CHRÁSKA, T.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; DUBSKÝ, J.; ŠVEJCAR, J. Influence of Isothermal Exposure on Microstructural Changes Resulting in Delamination of Eutectic Al2O3+ZrO2+SiO2 Thermal Barrier Coating. In Metal 2014. 1. Ostrava: TANGER Ltd., 2014. p. 885-890. ISBN: 978-80-87294-54-3.
  Detail

  SLÁMEČKA, K.; NĚMEC, K.; ČELKO, L.; HORNÍKOVÁ, J.; POKLUDA, J.; ŠVEJCAR, J. Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. no. 1, p. 716-719. ISBN: 9783037859346. ISSN: 1013-9826.
  Detail

  VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R. 3D Morphology of Fracture Surfaces Created by Mixed-mode II+III Fatigue Loading in Metallic Materials. Procedia Engineering, 2014, vol. 74, no. 1, p. 74-77. ISSN: 1877-7058.
  Detail

  ČELKO, L.; SMETANA, B.; KLAKURKOVÁ, L.; ZLÁ, S.; SLÁMEČKA, K.; ŠVEJCAR, J. Formation of Eutectic in Nickel Coated Hydronalium Alloy After the Heat Treatment. In 46th International October Conference on Mining and Metallurgy - IOC 2014 – Proceedings. 46. Belegrade, Serbia: University of Belgrade - Technical Faculty in Bor, 2014. p. 663-666. ISBN: 978-86-6305-026-6.
  Detail

  JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. no. 1, p. 567-572. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
  Detail

  ČELKO, L.; DÍAZ DE LA TORRE, S.; KLAKURKOVÁ, L.; KAISER, J.; SMETANA, B.; SLÁMEČKA, K.; ŽALUDOVÁ, M.; ŠVEJCAR, J. Temperature effect on the microstructural development of Al–Ni layered binary couples produced by an unconventional method. SURFACE & COATINGS TECHNOLOGY, 2014, vol. 258, no. 1, p. 95-101. ISSN: 0257-8972.
  Detail

  JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; DVOŘÁČEK, E.; ŠVEJCAR, J. Wear Resistant Coatings Deposited by Air Plasma Spraying Under Different Technological Parameters. In 46th International October Conference on Mining and Metallurgy - IOC 2014 – Proceedings. 46. Belegrade, Serbia: University of Belgrade - Technical Faculty in Bor, 2014. p. 659-662. ISBN: 978-86-6305-026-6.
  Detail

  ČELKO, L.; JECH, D.; CHRÁSKA, T.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; DUBSKÝ, J.; ŠVEJCAR, J. Formation and Growth of Thermally Grown Oxide in Two Different Atmospheric Plasma Sprayed Thermal Barrier Coating Systems. ICCE-22, Saint Julian´s, Malta, Proceedings. 22. Saint Julian´s, Malta: International Community for composites/Nano Engineering, 2014. p. 145-146.
  Detail

  JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; DVOŘÁČEK, E.; ŠVEJCAR, J. Influence of Technological Parameters on a Quality of Atmospheric Plasma Sprayed Al2O3+13%TiO2 and Cr2O3 Coatings. Saint Julian´s, Malta: International Community for composites/Nano Engineering, 2014. p. 401-402.
  Detail

• 2013

  JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 82-82. ISBN: 978-80-553-1412-9.
  Detail

  ČELKO, L.; JECH, D.; SKALKA, P.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; ŠVEJCAR, J. Microstructural Characterization of Thermally Grown Oxide in Atmospheric Plasma Sprayed Thermal Barier Coatings. ICCE-21, Tenerife, Proceedings. 1. Spain: Universidad de La Laguna, 2013. p. 1-2.
  Detail

  ŠVEJCAR, J.; ČELKO, L.; KLAKURKOVÁ, L.; JULIŠ, M.; SLÁMEČKA, K.; ZAPLETAL, J. Thermal Spray Technology and Casting Renovation of Friction Bearing Surface. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 148-148. ISBN: 978-80-553-1412-9.
  Detail

  SLÁMEČKA, K.; POKLUDA, J.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; OBRTLÍK, K. Fatigue Life of Cast Inconel 713LC with/without Protective Diffusion Coating under Bending, Torsion and their Combination. ENGINEERING FRACTURE MECHANICS, 2013, vol. 110, no. 1, p. 459-467. ISSN: 0013-7944.
  Detail

  KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; JULIŠ, M.; JULIŠOVÁ, M.; ŠVEJCAR, J. Formation and Morphology of Intermetallic Phases and Eutectic in Iron Coated Thick Aluminium Substrates. YUCOMAT 2013, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2013. p. 73-73.
  Detail

  SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J. Fractographically-aided Analysis of Fish-eye Crack Growth in Nitrided Steel. Journal of Theoretical and Applied Mechanics, 2013, vol. 51, no. 2, p. 439-446. ISSN: 1429-2955.
  Detail

• 2012

  ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HUTAŘOVÁ, S.; JULIŠ, M.; NĚMEC, K.; PODRÁBSKÝ, T.; ŠVEJCAR, J. STRUCTURAL STABILITY OF THERMAL BARRIER COATINGS PRODUCED BY THERMAL SPRAYING. In METAL 2012 Conference proceedings. 1. Ostrava: TANGER Ltd., 2012. p. 998-1004. ISBN: 978-80-87294-29-1.
  Detail

  KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; DVOŘÁČEK, E.; PODRÁBSKÝ, T.; ŠVEJCAR, J. The Role of Technological Input Parameters on a Quality of Plasma Sprayed Thermal Barrier Coatings. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 83-83.
  Detail

  POKLUDA, J.; OBRTLÍK, K.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; HUTAŘOVÁ, S.; KIANICOVÁ, M.; PODRÁBSKÝ, T. Fatigue Crack Paths in Cast Inconel 713LC with/without Al Diffusion Coating under Various Loading and Temperature Conditions. In Proceedings of the 4th International Conference on Crack Paths. 2012. s. 967-975. ISBN: 9788895940441.
  Detail

  HODIS, Z.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K. Atlas of Materials Structures - Educational Software. Technológia vzdelávania, 2012, vol. 20, no. 2, p. 3-7. ISSN: 1335-003X.
  Detail

  PODRÁBSKÝ, T.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HUTAŘOVÁ, S.; ŠVEJCAR, J. Characterization of Slurry Aluminide Diffusion Coatins on Inconel 713LC. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 87-87.
  Detail

  ČELKO, L.; KLAKURKOVÁ, L.; SMETANA, B.; SLÁMEČKA, K.; ŠVEJCAR, J.; ŽALUDOVÁ, M. Formation of Ultrafine Eutectic in Hypereutectic Alloys Produced by Heat Treatment of Nickel Coated. ICCE - 20. Beijing, China: State Key Lab Organic-Inorganic Composites, Beijing University of Chemical Technology, 2012. p. 94-96.
  Detail

  VOJTEK, T.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; SLÁMEČKA, K.; PIPPAN, R.; HOHENWARTER, A. Near-threshold Fatigue Crack Propagation under Mixed-mode II+III in ARMCO Iron. In 19th European Conference on Fracture. Kazan: 2012. p. 188-193. ISBN: 978-5-905576-18-8.
  Detail

  ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SMETANA, B.; ZLÁ, S.; ŽALUDOVÁ, M. Formation of Hypereutectic Aluminium-based Alloys or Nickel Aluminides Using Sacrificial Nickel Coatings. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 39-39.
  Detail

• 2011

  KIANICOVÁ, M.; SLÁMEČKA, K.; POKLUDA, J. Damage of Diffusion Coatings on Turbine Blades. In METAL 2011 Conference Proceedings. Metal. Ostrava: Tanger sro, 2011. p. 840-846. ISBN: 978-80-87294-24-6.
  Detail

  SLÁMEČKA, K.; BONAVENTUROVÁ, K.; POKLUDA, J. Bending and Torsion Fatigue of Inconel 713LC with and withouth Diffusion Coating. In METAL 2011 Conference Proceedings. Metal. Ostrava: Tanger sro, 2011. p. 692-697. ISBN: 978-80-87294-24-6.
  Detail

  SLÁMEČKA, K.; POKLUDA, J.; BONAVENTUROVÁ, K.; ČELKO, L. Microfractography of Fish-Eye Fractures in Nitrided Steel. CHEMICKE LISTY, 2011, vol. 105, no. S, p. 721-724. ISSN: 0009-2770.
  Detail

  SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J. Fractography of Fish-eye Cracks in Nitride Steel Specimens: Assessment of Residual Fatigue Life. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2011, vol. z98, no. 1, p. 1-10. ISSN: 1429-6055.
  Detail

  KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; DOLEŽAL, P.; ŠVEJCAR, J. Influence of Temperature on Microhardness of Aluminium-based composites Produced by Controlled Hypereutectic Reaction in Al-Ni Binary System. CHEMICKE LISTY, 2011, vol. 105, no. S, p. 820-821. ISSN: 0009-2770.
  Detail

• 2010

  POKLUDA, J.; SLÁMEČKA, K.; ŠANDERA, P. Mechanism of Factory-Roof Formation. ENGINEERING FRACTURE MECHANICS, 2010, vol. 77, no. 1, p. 1763-1771. ISSN: 0013-7944.
  Detail

  HOLÁŇ, L.; POKLUDA, J.; SLÁMEČKA, K. Local Aspects of Shear-Mode Crack Propagation in Austenitic Steel. CHEMICKE LISTY, 2010, vol. 104, no. 15, p. 314-317. ISSN: 0009-2770.
  Detail

  ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MAN, O.; ŠVEJCAR, J. Atlas of Materials Structures -. Acta metalurgica slovaca, 2010, vol. 2010, no. 1, p. 123-128. ISSN: 1338-1660.
  Detail

  SLÁMEČKA, K.; POKLUDA, J.; KIANICOVÁ, M.; MAJOR, Š.; DVOŘÁK, I. Quantitative fractography of fish-eye crack formation under bending-torsion fatigue. International Journal of Fatigue, 2010, vol. 32, no. 6, p. 921-928. ISSN: 0142-1123.
  Detail

  ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MAN, O.; ŠVEJCAR, J. Atlas of Materials Structures - An Useful Apllication for Students in the Field of Materials Sciences and Engineering. YUCOMAT 2010. Belgrade, Serbia: IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2010. p. 162-162. ISBN: 978-86-80321-25-7.
  Detail

• 2009

  HOLÁŇ, L.; PIPPAN, R.; POKLUDA, J.; HORNÍKOVÁ, J.; HOHENWARTER, A.; SLÁMEČKA, K. Near-Threshold Propagation of Mode II and Mode III Cracks. In Crack Paths. Vicenza, Italy: University of Parma, 2009. p. 585-592. ISBN: 0000000000000.
  Detail

  SLÁMEČKA, K.; MAJOR, Š.; POKLUDA, J. SEM-stereofotogrammetrie únavových lomu krutove zatežovaných vzorku s obvodovým vrubem. In FSI Junior konference. Brno: VUTIUM, 2009. s. 56-63. ISBN: 978-80-214-3834-7.
  Detail

  POKLUDA, J.; SLÁMEČKA, K.; ŠANDERA, P. On the Mechanism of Factory-Roof Formation. In Crack Paths. Vicenza, Italy: University of Parma, 2009. p. 155-166. ISBN: 0000000000000.
  Detail

  HOLÁŇ, L.; POKLUDA, J.; SLÁMEČKA, K. Local Aspects of Shear-mode Crack Propagation in Austenitic Steel. In Víceúrovňový design pokrokových materiálů 09. Brno: ÚFM AVČR, 2009. s. 123-130. ISBN: 978-80-254-6070-2.
  Detail

• 2008

  POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; KOZÁK, V.; HORNÍKOVÁ, J.; ŠANDERA, P. Microstructural Interpretation of Effective Fatigue Threshold of Structural Steel. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2216-2219. ISBN: 9781617823190.
  Detail

  POKLUDA, J.; PODRÁBSKÝ, T.; SLÁMEČKA, K.; POSPÍŠILOVÁ, S.; CHAI, G. Microstructure-aided Analysis of Fatigue Thresholds in Duplex Stainless Steel. Materials Science Forum, 2008, vol. 567-568, no. 1, p. 101-104. ISSN: 0255-5476.
  Detail

  CHAI, G.; PENG, R. L; SLÁMEČKA, K.; JOHANSSON S. In Situ SEM/EBSD analysis of fatigue crack propagation behavior of a super duplex stainless steel. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 1350-1357. ISBN: 9781617823190.
  Detail

  MAJOR, Š.; SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J. Fractografical Analysis of Fish-eye Formation under Multiaxial Fatigue. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 1143-1149. ISBN: 9781617823190.
  Detail

  POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. In Fracture and Damage Mechanics. 1. Seoul: TransTech Publication, 2008. p. 49-52. ISBN: 978-0-87849-369-2.
  Detail

  HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J. On the Micromechanisms of Fatigue Long Crack Growth under Remote Shear Loading Modes. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2437-2442. ISBN: 9781617823190.
  Detail

  HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J. Quantitative Fractography of Fatigue Long Crack Growth under Remote Shear Loading Modes. In 25th Danubia-Adria Symposium on Advances in Experimental Mechanics. 2008. p. 87-88. ISBN: 978-80-01-04162-8.
  Detail

  SLÁMEČKA, K.; CHAI, G.; POKLUDA, J. Analysis of Fatigue Crack Propagation and Crack Shielding in Super Duplex Stainless Steel and its Welds. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2401-2406. ISBN: 9781617823190.
  Detail

  POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. Key Engineering Materials (print), 2008, vol. 385-387, no. 1, p. 49-52. ISSN: 1013-9826.
  Detail

  HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J. Experimental Evaluation of Fatigue Long Crack Propagation under Remote Shear Loading Modes II and III. Internetový časopis Materiálovotechnologická fakulta STU so sídlom v Trnave, 2008, vol. 8, no. 4, p. 55-59. ISSN: 1335-9053.
  Detail

• 2007

  SLÁMEČKA, K.; POKLUDA, J.; PONÍŽIL, P.; ŠANDERA, P. Reconstruction and Evaluation of 3D Fracture Surface Morphology. In Advances in Computational & Experimental Engineering and Sciences. 2007. p. 1507-1513. ISBN: 0-9717880-3-0.
  Detail

  SLÁMEČKA, K.; PONÍŽIL, P.; POKLUDA, J. Quantitative Fractography in Bending-Torsion Fatigue. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, vol. 462, no. 2, p. 359-362. ISSN: 0921-5093.
  Detail

  SLÁMEČKA, K.; POKLUDA, J.; PONÍŽIL, P.; MAJOR, Š.; ŠANDERA, P. On the topography of fracture surfaces in bending-torsion fatigue. ENGINEERING FRACTURE MECHANICS, 2007, vol. 75, no. 1, p. 760-767. ISSN: 0013-7944.
  Detail

  POKLUDA, J.; ŠANDERA, P.; OHLÍDAL, M.; ČERNÝ, M.; PILCH, J.; FLORIAN, Z.; SLÁMEČKA, K.; ŠESTÁK, P.; DOLOŽÍLEK, M.; HORNÍKOVÁ, J. Physical Engineering: Research Support of Mechatronic Models. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2007. p. 15-27. ISBN: 978-80-214-3559-9.
  Detail

• 2006

  SLÁMEČKA, K.; PONÍŽIL, P.; POKLUDA, J. Quantitative Fractography in Bending-Torsion Fatigue. 2006.
  Detail

  MAJOR, Š.; PONÍŽIL, P.; SLÁMEČKA, K.; POKLUDA, J. 3D-Fractography in Bending-Torsion Fatigue. In Crack Paths. Parma: University of Parma, 2006. 8 p.
  Detail

  POKLUDA, J.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; ŠANDERA, P. On the Reconstruction of Crack Paths in Biaxial Fatigue. In Fractography 2006. 1. Stará Lesná: ÚMV SAV, 2006. p. 497-500. ISBN: 80-968543-5-6.
  Detail

  SLÁMEČKA, K.; POKLUDA, J. On the Fracture Morphology in Bending-Torsion Fatigue. In New Methods of Damage and Failure Analysis of Structural Parts. 1. Ostrava: VŠB-TU, 2006. p. 111-117. ISBN: 80-248-1126-X.
  Detail

  POKLUDA, J.; HORÁKOVÁ, H.; SLÁMEČKA, K. Predikce únavové životnosti při zatížení v kombinaci ohyb-krut a fraktografická analýza oceli ČSN 41 5340. In Víceúrovňový design pokrokových materiálů 06. 1. Brno: ÚFM AV ČR, 2006. s. 135-142. ISBN: 80-239-8271-0.
  Detail

  SLÁMEČKA, K.; MAJOR, Š.; PONÍŽIL, P.; POKLUDA, J. Roughness and Fractal Analysis in Bending-Torsion Fatigue. In Fractography 2006. 1. Stará Lesná: ÚMV SAV, 2006. p. 90-96. ISBN: 80-968543-5-6.
  Detail

• 2005

  SLÁMEČKA, K.; POKLUDA, J. Analysis of Fracture Morphology and Local Loading Modes in Torsional Fatigue. Materials Science Forum, 2005, vol. 482, no. 0, p. 263-266. ISSN: 0255-5476.
  Detail

• 2004

  SLÁMEČKA, K., POKLUDA, J. 3D Analysis of Fatigue Fracture Morphology Generated by Combined Bending - Torsion. In Advanced Fracture Mechanics for Life and Safety Assesments (ECF15). Stockholm: 2004. 6 p.
  Detail

• 2003

  SLÁMEČKA, K.; SABIROV, I.; POKLUDA, J.; PIPPAN, R. 3D Morphology of Fracture Surfaces in Bending-Torsion Fatigue. In Transcom. Žilina: ŽU Žilina, 2003. 4 p. ISBN: 80-8070-084-2.
  Detail

  NEMEŠ, R.; SLÁMEČKA, K.; POKLUDA, J. Biaxial Fatigue of High-Strength Low-Alloy Steel. In Transcom. Žilina: ŽU Žilina, 2003. 4 p. ISBN: 80-8070-084-2.
  Detail

  SLÁMEČKA, K.; POKLUDA, J. Stereofotogrammetrická analýza multiaxiálních lomových povrchů oceli ČSN 15340. In Degradácia 03. Žilina: ŽU Žilina, 2003. 5 s. ISBN: 80-8070-112-1.
  Detail

  POKLUDA, J., PIPPAN, R., SLÁMEČKA, K., KOLEDNIK, O. Fatigue Crack Growth in Metals under Pure Mode III: Reality or Fiction?. In Fatigue Crack Paths. Parma: 2003. 1 p.
  Detail

• 2001

  SLÁMEČKA, K., POKLUDA, J., BARTÍK, L. Životnost nízkolegované oceli při kombinovaném namáhání v krutu a ohybu. In Degradácia vlastností konštrukčných materiálov únavou. Žilina: ŽU Žilina, 2001. 6 s. ISBN: 80-7100-873-7.
  Detail

*) Citations are generated once every 24 hours.