Doctoral Thesis

Morphological modifications of photocatalysts and their influence on photocatalytic activity

Final Thesis 3.77 MB

Author of thesis: Valli Kamala Laxmi Ramya Chittoory, M.Sc.

Acad. year: 2026/2027

Supervisor: doc. Ing. Petr Dzik, Ph.D.

Reviewers: doc. Ing. Dana Dvoranová, Ph.D., Dr. Michael Neumann-Spallart

Abstract:

Tungsten trioxide (WO₃) is a semiconductor that becomes active under visible light, showing promise for application in photoelectrochemical water treatment processes. A significant obstacle in creating WO₃ photoanodes through wet coating is forming a layer structure that integrates accessible crystalline material with adequate structural connectivity to facilitate charge collection. This thesis explored whether integrating a particulate WO₃ dispersion with a soluble WO₃ precursor into a single ink formulation known as the brick-and-mortar method could yield a more effective photoanode than using each component individually. The experimental process was divided into four distinct phases. Initially, TiO₂ (P25) served as a benchmark to develop protocols for coating, curing, degradation, and kinetic assessment. In the second phase, commercial WO₃ powder underwent ball milling to create the particulate component; the duration of milling was found to affect particle size, surface area, layer morphology, and crystallographic phase composition. A multimodal dispersion mixture, milled for 3.5 hours and 96 hours in equal parts, was chosen for further experiments. In the third phase, acetyl-peroxotungstic acid (APTA) was synthesized as the soluble precursor and underwent thermal characterization; it transforms into crystalline WO₃ when annealed above 400 - 500 °C. Particulate, soluble precursor, and brick-and-mortar photoanodes were then fabricated and compared. Under identical Meyer rod deposition and photoelectrochemical measurement conditions, the brick-and-mortar formulation yielded a substantially higher photocurrent than either the particulate or soluble precursor formulations alone. This finding represents the core experimental outcome of the thesis. Finally, the brick-and-mortar formulation was tested under various application-oriented conditions, including perchloric acid electrolytes with different glycerol concentrations, model pollutant degradation using resazurin and coumarin, front and back-side illumination setups, and a proof-of-concept experiment conducted in tap water. The brick-and-mortar design demonstrated higher photoelectrochemical performance under several of the investigated conditions. However, an exception was observed during resazurin degradation without a hole scavenger, where the soluble precursor ink achieved a higher degradation rate. This suggests that performance rankings may vary based on the electrolyte composition and reaction conditions. The precise structural reasons for the brick-and-mortar advantage remain unclear, potential factors include better particle connectivity, improved substrate contact, and an optimal balance between porosity and structural continuity, though their individual impacts were not separately measured. These results endorse the brick-and-mortar approach as a promising design strategy for wet-coated WO₃ photoanodes, while highlighting the need for further research into charge-transfer characterization and long-term stability.

Keywords:

Photoelectrocatalysis, Advanced Oxidation Process, Tungsten (VI) Oxide, Wet-Coating Methods, Brick-and-Mortar

Date of defence

04.11.2026

Result of the defence

Defended (thesis was successfully defended)

znamkaPznamka

Process of defence

Disertační práce paní Chittoory se zabývá vývojem a optimalizací fotoanod na bázi oxidu wolframu (WO₃), které lze využít k čištění vody pomocí viditelného světla. Zaměřuje se na přípravu nového typu inkoustové formulace metodou „cihla a malta“, která kombinuje částice WO₃ s rozpustným prekurzorem s cílem zlepšit strukturu materiálu a zvýšit jeho fotoelektrochemickou účinnost. Experimentálně bylo prokázáno, že tato metoda ve většině testovaných podmínek poskytuje vyšší fotoproud a představuje slibný přístup pro vývoj účinnějších materiálů pro odstraňování znečišťujících látek z vody. Téma práce je aktuální a relevantní, neboť se zabývá vývojem a optimalizací fotoaktivních materiálů s potenciálním využitím při čištění vody za působení viditelného světla. Výzkum fotoanod na bázi WO₃ a studium vlivu jejich morfologie, velikosti částic a struktury na fotoelektrochemickou aktivitu představují perspektivní oblast současného materiálového výzkumu. Stanovené cíle práce byly splněny a výsledky práce přinesly zajímavé poznatky a potvrdily potenciál zkoumaného přístupu. Během obhajoby paní Chittoory prokázala dobrou orientaci ve zkoumané oblasti a schopnost samostatně vědecky pracovat. Na dotazy komise a oponentů odpověděla výborně.

Language of thesis

English

Faculty

Department

Study programme

Advanced Materials and Nanosciences (CEITEC-AMN-CZ-P)

Composition of Committee

prof. RNDr. Radim Chmelík, Ph.D. (předseda)
prof. Ing. Radimír Vrba, CSc. (předseda)
doc. Ing. Dana Dvoranová, Ph.D. (člen)
doc. Ing. Jana Drbohlavová, Ph.D. (člen)
Dr. Michael Neumann-Spallart (člen)

Supervisor’s report
doc. Ing. Petr Dzik, Ph.D.

viz posudek v pdf.
File inserted by supervisor Size
Posudek vedoucího práce [.pdf] 185,08 kB

viz posudek v pdf.
File inserted by the reviewer Size
Posudek oponenta [.pdf] 175,18 kB

Reviewer’s report
Dr. Michael Neumann-Spallart

viz posudek v pdf.
File inserted by the reviewer Size
Posudek oponenta [.pdf] 927,05 kB

Responsibility: Mgr. et Mgr. Hana Odstrčilová