Přístupnostní navigace
E-application
Search Search Close
Bachelor's Thesis
Author of thesis: Bc. Pavol Volček
Acad. year: 2025/2026
Supervisor: Ing. Adam Svoboda, Ph.D.
Reviewer: doc. Ing. Ladislav Klusáček, CSc.
This bachelor’s thesis deals with the strengthening of the bridge over the Skalička stream near Oleksovice. It is a beam bridge whose structural load-bearing capacity did not satisfy the requirements of current standards. The original reinforcement of the bridge was unknown therefore, it was estimated according to the design procedures used at the time, employing the allowable stress method based on the Nový mostní řád (1904). The bridge strengthening was designed using the method of external post-tensioning. The structure was assessed with respect to the ultimate limit state and the serviceability limit state according to currently valid standards. The structural analysis was carried out using a combination of hand calculations and a numerical model created in the RFEM 6 software.
Bridge, reinforced concrete, beam structure, prestressing, ultimate limit state, serviceability limit state, traffic loading.
Date of defence
17.06.2026
Result of the defence
Defended (thesis was successfully defended)
Grading
C
Process of defence
Student představil komisi formou prezentace svoji diplomovou práci a reagoval na připomínky a dotazy oponenta vyjádřené v oponentském posudku i na otázky členů komise: Doc. Nečas – Jak jste namodeloval koncový příčník? – student odpověděl s dopomocí Doc. Nečas – Jakým způsobem jste získal zatížení pro výpočet vnitřních sil na jeden trám v době projektování konstrukce? – student odpověděl s dopomocí Doc. Nečas – Existuje metoda pro výpočet zatažení připadajícího na jeden trám u vícetrámových konstrukcí? – student odpověděl s dopomocí Ing. Požár – Jakou třídu betonu jste uvažoval při výpočtu a jak to ovlivnilo krytí výztuže? - student odpověděl
Language of thesis
Czech
Faculty
Fakulta stavební
Department
Institute of Concrete and Masonry Structures
Study programme
Civil Engineering (BPC-SI)
Specialization
Structural and Transport Engineering (K)
Composition of Committee
doc. Ing. Radim Nečas, Ph.D. (předseda) doc. Ing. Miloš Zich, Ph.D. (místopředseda) Ing. Michal Požár, Ph.D. (člen) Ing. Ondřej Šimek, Ph.D. (člen) Ing. Petr Šimůnek, Ph.D. (člen) Ing. Pavel Kaláb, Ph.D. (člen)
Supervisor’s reportIng. Adam Svoboda, Ph.D.
Grade proposed by supervisor: A
Reviewer’s reportdoc. Ing. Ladislav Klusáček, CSc.
Grade proposed by reviewer: B
Responsibility: Mgr. et Mgr. Hana Odstrčilová