Přístupnostní navigace
E-application
Search Search Close
Master's Thesis
Author of thesis: Ing. Adam Vlk
Acad. year: 2025/2026
Supervisor: Ing. Michal Požár, Ph.D.
Reviewer: Ing. Jiří Strnad, Ph.D.
The master‘s thesis focuses with the design of selected parts of reinforced concrete load-bearing structures of the badminton center's facilities, especially the white tank, using the BIM. The design was carried out in the SCIIA Engineer program and was subsequently verified by manual calculations. Based on the results of the FEM, the optimal reinforcement design was determined. In parallel, a 3D BIM model of the badminton centre, detailed drawing documentation, structural design calculations, and a technical report were produced. The structural design was carried out in accordance with the ČSN EN 1992-1-1 – EC2 standard and the technical regulations TP ČBS 04.
Reinforced concrete, white tank, foundation slab, piles, perimeter walls, floor slab, BIM (Building Information Modelling), ultimate limit state, serviceability limit state, crack width
Date of defence
05.02.2026
Result of the defence
Defended (thesis was successfully defended)
Grading
A
Process of defence
Student představil komisi formou prezentace svoji diplomovou práci a reagoval na připomínky a dotazy oponenta vyjádřené v oponentském posudku i na otázky členů komise: prof. RNDr. Ing. Petr Štěpánek, CSc., dr. h. c – Jaký jste uvažoval výpočetní model u návrhu desky s pilotami? – Student odpověděl prof. RNDr. Ing. Petr Štěpánek, CSc., dr. h. c – Posuzoval jste protlačení desky od pilot a stěny? – Student odpověděl doc. Ing. Ivana Láníková, Ph.D. – Jakou jste uvažoval délku dilatačního celku a je desce umožněn pohyb? – Student odpověděl Ing. Ondřej Januš, Ph.D. – jak jste uvažoval posouzení protlačení v detailu sloup – deska – pilota? – Student odpověděl Ing. Martin Zlámal, Ph.D. – Popište deformaci základové desky? – Student odpověděl Ing. Ondřej Januš, Ph.D. – jaké piloty jste v projektu použil a jak jste uvažoval ve výpočtu sedání pilot? – Student odpověděl Ing. Ondřej Januš, Ph.D. – Proč používáte v desce smykové trny? – Student odpověděl prof. RNDr. Ing. Petr Štěpánek, CSc., dr. h. c – Jaké účinky působí v základové spáře na desku? – Student odpověděl doc. Ing. Petr Bílý, Ph.D. – Jaká byla rezerva únosnosti u protlačení běžného sloupu a jak se bude lišit u krajního sloupu? – Student odpověděl Ing. Martin Zlámal, Ph.D. – Jaké opatření byste zvolil při betonáži, aby vám vznikla řízená trhlina? – Student odpověděl
Language of thesis
Czech
Faculty
Fakulta stavební
Department
Institute of Concrete and Masonry Structures
Study programme
Civil Engineering – Building Construction (NPC-SIS)
Composition of Committee
prof. RNDr. Ing. Petr Štěpánek, CSc., dr. h. c. (místopředseda) doc. Ing. Ivana Laníková, Ph.D. (člen) Ing. Martin Zlámal, Ph.D. (člen) Ing. Radim Smolka, Ph.D. (člen) Ing. Ondřej Januš, Ph.D. (člen) doc. Ing. Petr Bílý, Ph.D. (předseda) doc. Ing. Lukáš Novák, Ph.D. (člen)
Supervisor’s reportIng. Michal Požár, Ph.D.
Grade proposed by supervisor: A
Reviewer’s reportIng. Jiří Strnad, Ph.D.
Grade proposed by reviewer: A
Responsibility: Mgr. et Mgr. Hana Odstrčilová